[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#407030: marked as done (Package: installation-reports)



Your message dated Tue, 16 Jan 2007 17:27:26 +0100
with message-id <200701161727.26694.elendil@planet.nl>
and subject line Bug#407030: Package: installation-reports
has caused the attached Bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Debian bug tracking system administrator
(administrator, Debian Bugs database)

--- Begin Message ---
Package: installation-reports
Version: 2.27
Severity: critical
Justification: breaks the whole system

*** Please type your report below this line ***


-- Package-specific info:

Boot method: CD
Image version:
http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/i386/iso-cd/debian-testing-i386-netinst.iso
11 Jan 2007
Date: 11 Jan 2007

Machine: Home brew using Asus K8V SE motherboard (AMD Athlon 64 - but
installing 32bit system)
Partitions: <df -Tl will do; the raw partition table is preferred>
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [O]
Detect network card:    [E]
Configure network:      [E]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Install base system:    [O]
Clock/timezone setup:   [O]
User/password setup:    [O]
Install tasks:          [O]
Install boot loader:    [O]
Overall install:        [O]

Comments/Problems:
At the moment of Detect network card, this snapshot assigns my card to
eth1. This has never happened before in any other Debian netinst CD. My
network card is:
00:0a.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001
Gigabit Ethernet Controller (rev 13)
I selected the eth0 card (sorry I don't recall what it was called,
something like "fast ethernet card") but when I got to selecting mirrors
for apt-get I realised
there was no network connection. I tried this a few times (I was using
"expertgui") and then went back and selected eth1. The installation
proceeded normally but when I
finally got my system up and running I couldn't connect to the network.

I solved the problem by using an earlier version of Etch Netinst
(28/10/06) and the installation went absolutely normally. My network
card was detected as eth0 and the
network connection was maintained not only during the install but also
once I booted into the system.


-- 

Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.

Once you have filled out this report, mail it to submit@bugs.debian.org.

==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="3.1 (installer build 20061026)"
X_INSTALLATION_MEDIUM=cdrom

==============================================
Installer hardware-summary:
==============================================
umame -a: Linux Attila 2.6.17-2-486 #1 Wed Sep 13 15:56:30 UTC 2006 i686
unknown
lspci -v -t: -[0000:00]-+-00.0  VIA Technologies, Inc. VT8385 [K8T800
AGP] Host Bridge
lspci -v -t:            +-01.0-[0000:01]--+-00.0  ATI Technologies Inc
RV350 AS [Radeon 9550]
lspci -v -t:            |                 \-00.1  ATI Technologies Inc
RV350 ?? [Radeon 9550] (Secondary)
lspci -v -t:            +-07.0  VIA Technologies, Inc. IEEE 1394 Host
Controller
lspci -v -t:            +-0a.0  Marvell Technology Group Ltd. 88E8001
Gigabit Ethernet Controller
lspci -v -t:            +-0f.0  VIA Technologies, Inc. VIA VT6420 SATA
RAID Controller
lspci -v -t:            +-0f.1  VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE
lspci -v -t:            +-10.0  VIA Technologies, Inc. VT82xxxxx UHCI
USB 1.1 Controller
lspci -v -t:            +-10.1  VIA Technologies, Inc. VT82xxxxx UHCI
USB 1.1 Controller
lspci -v -t:            +-10.2  VIA Technologies, Inc. VT82xxxxx UHCI
USB 1.1 Controller
lspci -v -t:            +-10.3  VIA Technologies, Inc. VT82xxxxx UHCI
USB 1.1 Controller
lspci -v -t:            +-10.4  VIA Technologies, Inc. USB 2.0
lspci -v -t:            +-11.0  VIA Technologies, Inc. VT8237 ISA bridge
[KT600/K8T800/K8T890 South]
lspci -v -t:            +-11.5  VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller
lspci -v -t:            +-11.6  VIA Technologies, Inc. AC'97 Modem
Controller
lspci -v -t:            +-18.0  Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration
lspci -v -t:            +-18.1  Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Address Map
lspci -v -t:            +-18.2  Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] DRAM Controller
lspci -v -t:            \-18.3  Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Miscellaneous Control
lspci -n: 00:00.0 0600: 1106:3188 (rev 01)
lspci -n: 00:01.0 0604: 1106:b188
lspci -n: 00:07.0 0c00: 1106:3044 (rev 46)
lspci -n: 00:0a.0 0200: 11ab:4320 (rev 13)
lspci -n: 00:0f.0 0104: 1106:3149 (rev 80)
lspci -n: 00:0f.1 0101: 1106:0571 (rev 06)
lspci -n: 00:10.0 0c03: 1106:3038 (rev 81)
lspci -n: 00:10.1 0c03: 1106:3038 (rev 81)
lspci -n: 00:10.2 0c03: 1106:3038 (rev 81)
lspci -n: 00:10.3 0c03: 1106:3038 (rev 81)
lspci -n: 00:10.4 0c03: 1106:3104 (rev 86)
lspci -n: 00:11.0 0601: 1106:3227
lspci -n: 00:11.5 0401: 1106:3059 (rev 60)
lspci -n: 00:11.6 0780: 1106:3068 (rev 80)
lspci -n: 00:18.0 0600: 1022:1100
lspci -n: 00:18.1 0600: 1022:1101
lspci -n: 00:18.2 0600: 1022:1102
lspci -n: 00:18.3 0600: 1022:1103
lspci -n: 01:00.0 0300: 1002:4153
lspci -n: 01:00.1 0380: 1002:4173
lspci -v: 00:00.0 Host bridge: VIA Technologies, Inc. VT8385 [K8T800
AGP] Host Bridge (rev 01)
lspci -v:     Subsystem: ASUSTeK Computer Inc. Unknown device 80a3
lspci -v:     Flags: bus master, 66MHz, medium devsel, latency 8
lspci -v:     Memory at f8000000 (32-bit, prefetchable) [size=64M]
lspci -v:     Capabilities: [80] AGP version 3.5
lspci -v:     Capabilities: [c0] HyperTransport: Slave or Primary Interface
lspci -v:     Capabilities: [68] Power Management version 2
lspci -v:     Capabilities: [58] HyperTransport: Interrupt Discovery and
Configuration
lspci -v:
lspci -v: 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge
[K8T800/K8T890 South]
lspci -v:     Flags: bus master, 66MHz, medium devsel, latency 0
lspci -v:     Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
lspci -v:     I/O behind bridge: 0000a000-0000afff
lspci -v:     Memory behind bridge: fd100000-fd6fffff
lspci -v:     Prefetchable memory behind bridge: b7f00000-f7efffff
lspci -v:     Capabilities: [80] Power Management version 2
lspci -v:
lspci -v: 00:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394
Host Controller (rev 46) (prog-if 10)
lspci -v:     Subsystem: ASUSTeK Computer Inc. Unknown device 808a
lspci -v:     Flags: bus master, medium devsel, latency 64, IRQ 177
lspci -v:     Memory at fda00000 (32-bit, non-prefetchable) [size=2K]
lspci -v:     I/O ports at ec00 [size=128]
lspci -v:     Capabilities: [50] Power Management version 2
lspci -v:
lspci -v: 00:0a.0 Ethernet controller: Marvell Technology Group Ltd.
88E8001 Gigabit Ethernet Controller (rev 13)
lspci -v:     Subsystem: ASUSTeK Computer Inc. Unknown device 811a
lspci -v:     Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 193
lspci -v:     Memory at fde00000 (32-bit, non-prefetchable) [size=16K]
lspci -v:     I/O ports at b000 [size=256]
lspci -v:     Expansion ROM at fdd00000 [disabled] [size=128K]
lspci -v:     Capabilities: [48] Power Management version 2
lspci -v:     Capabilities: [50] Vital Product Data
lspci -v:
lspci -v: 00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420
SATA RAID Controller (rev 80)
lspci -v:     Subsystem: ASUSTeK Computer Inc. Unknown device 80ed
lspci -v:     Flags: bus master, medium devsel, latency 64, IRQ 185
lspci -v:     I/O ports at e800 [size=8]
lspci -v:     I/O ports at e400 [size=4]
lspci -v:     I/O ports at e000 [size=8]
lspci -v:     I/O ports at d800 [size=4]
lspci -v:     I/O ports at d400 [size=16]
lspci -v:     I/O ports at d000 [size=256]
lspci -v:     Capabilities: [c0] Power Management version 2
lspci -v:
lspci -v: 00:0f.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
(prog-if 8a [Master SecP PriP])
lspci -v:     Subsystem: ASUSTeK Computer Inc. Unknown device 80ed
lspci -v:     Flags: bus master, medium devsel, latency 32, IRQ 185
lspci -v:     I/O ports at fc00 [size=16]
lspci -v:     Capabilities: [c0] Power Management version 2
lspci -v:
lspci -v: 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI
USB 1.1 Controller (rev 81)
lspci -v:     Subsystem: ASUSTeK Computer Inc. Unknown device 80ed
lspci -v:     Flags: bus master, medium devsel, latency 64, IRQ 169
lspci -v:     I/O ports at b400 [size=32]
lspci -v:     Capabilities: [80] Power Management version 2
lspci -v:
lspci -v: 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI
USB 1.1 Controller (rev 81)
lspci -v:     Subsystem: ASUSTeK Computer Inc. Unknown device 80ed
lspci -v:     Flags: bus master, medium devsel, latency 64, IRQ 169
lspci -v:     I/O ports at b800 [size=32]
lspci -v:     Capabilities: [80] Power Management version 2
lspci -v:
lspci -v: 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI
USB 1.1 Controller (rev 81)
lspci -v:     Subsystem: ASUSTeK Computer Inc. Unknown device 80ed
lspci -v:     Flags: bus master, medium devsel, latency 64, IRQ 169
lspci -v:     I/O ports at c000 [size=32]
lspci -v:     Capabilities: [80] Power Management version 2
lspci -v:
lspci -v: 00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI
USB 1.1 Controller (rev 81)
lspci -v:     Subsystem: ASUSTeK Computer Inc. Unknown device 80ed
lspci -v:     Flags: bus master, medium devsel, latency 64, IRQ 169
lspci -v:     I/O ports at c400 [size=32]
lspci -v:     Capabilities: [80] Power Management version 2
lspci -v:
lspci -v: 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev
86) (prog-if 20)
lspci -v:     Subsystem: ASUSTeK Computer Inc. Unknown device 80ed
lspci -v:     Flags: bus master, medium devsel, latency 64, IRQ 169
lspci -v:     Memory at fdf00000 (32-bit, non-prefetchable) [size=256]
lspci -v:     Capabilities: [80] Power Management version 2
lspci -v:
lspci -v: 00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge
[KT600/K8T800/K8T890 South]
lspci -v:     Subsystem: ASUSTeK Computer Inc. Unknown device 80ed
lspci -v:     Flags: bus master, stepping, medium devsel, latency 0
lspci -v:     Capabilities: [c0] Power Management version 2
lspci -v:
lspci -v: 00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
lspci -v:     Subsystem: ASUSTeK Computer Inc. Unknown device 80b0
lspci -v:     Flags: medium devsel, IRQ 5
lspci -v:     I/O ports at c800 [size=256]
lspci -v:     Capabilities: [c0] Power Management version 2
lspci -v:
lspci -v: 00:11.6 Communication controller: VIA Technologies, Inc. AC'97
Modem Controller (rev 80)
lspci -v:     Flags: medium devsel
lspci -v:     I/O ports at 1000 [disabled] [size=256]
lspci -v:     Capabilities: [d0] Power Management version 2
lspci -v:
lspci -v: 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration
lspci -v:     Flags: fast devsel
lspci -v:     Capabilities: [80] HyperTransport: Host or Secondary Interface
lspci -v:
lspci -v: 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Address Map
lspci -v:     Flags: fast devsel
lspci -v:
lspci -v: 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] DRAM Controller
lspci -v:     Flags: fast devsel
lspci -v:
lspci -v: 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Miscellaneous Control
lspci -v:     Flags: fast devsel
lspci -v:
lspci -v: 01:00.0 VGA compatible controller: ATI Technologies Inc RV350
AS [Radeon 9550]
lspci -v:     Subsystem: Club-3D BV Unknown device 1018
lspci -v:     Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11
lspci -v:     Memory at e0000000 (32-bit, prefetchable) [size=256M]
lspci -v:     I/O ports at a000 [size=256]
lspci -v:     Memory at fd600000 (32-bit, non-prefetchable) [size=64K]
lspci -v:     Expansion ROM at fd500000 [disabled] [size=128K]
lspci -v:     Capabilities: [58] AGP version 3.0
lspci -v:     Capabilities: [50] Power Management version 2
lspci -v:
lspci -v: 01:00.1 Display controller: ATI Technologies Inc RV350 ??
[Radeon 9550] (Secondary)
lspci -v:     Subsystem: Club-3D BV Unknown device 1019
lspci -v:     Flags: bus master, 66MHz, medium devsel, latency 64
lspci -v:     Memory at d0000000 (32-bit, prefetchable) [size=256M]
lspci -v:     Memory at fd400000 (32-bit, non-prefetchable) [size=64K]
lspci -v:     Capabilities: [50] Power Management version 2
lspci -v:
lspci -x: 00:00.0 Host bridge: VIA Technologies, Inc. VT8385 [K8T800
AGP] Host Bridge (rev 01)
lspci -x: 00: 06 11 88 31 06 00 30 22 01 00 00 06 00 08 00 00
lspci -x: 10: 08 00 00 f8 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 a3 80
lspci -x: 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge
[K8T800/K8T890 South]
lspci -x: 00: 06 11 88 b1 07 01 30 02 00 00 04 06 00 00 01 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 01 01 00 a0 a0 20 22
lspci -x: 20: 10 fd 60 fd f0 b7 e0 f7 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 0a 00
lspci -x:
lspci -x: 00:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394
Host Controller (rev 46)
lspci -x: 00: 06 11 44 30 17 01 10 02 46 10 00 0c 40 40 00 00
lspci -x: 10: 00 00 a0 fd 01 ec 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 8a 80
lspci -x: 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 00 20
lspci -x:
lspci -x: 00:0a.0 Ethernet controller: Marvell Technology Group Ltd.
88E8001 Gigabit Ethernet Controller (rev 13)
lspci -x: 00: ab 11 20 43 17 01 b0 02 13 00 00 02 40 40 00 00
lspci -x: 10: 00 00 e0 fd 01 b0 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 1a 81
lspci -x: 30: 00 00 d0 fd 48 00 00 00 00 00 00 00 0a 01 17 1f
lspci -x:
lspci -x: 00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420
SATA RAID Controller (rev 80)
lspci -x: 00: 06 11 49 31 07 00 90 02 80 00 04 01 00 40 80 00
lspci -x: 10: 01 e8 00 00 01 e4 00 00 01 e0 00 00 01 d8 00 00
lspci -x: 20: 01 d4 00 00 01 d0 00 00 00 00 00 00 43 10 ed 80
lspci -x: 30: 00 00 00 00 c0 00 00 00 00 00 00 00 0a 02 00 00
lspci -x:
lspci -x: 00:0f.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
lspci -x: 00: 06 11 71 05 07 00 90 02 06 8a 01 01 00 20 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 01 fc 00 00 00 00 00 00 00 00 00 00 43 10 ed 80
lspci -x: 30: 00 00 00 00 c0 00 00 00 00 00 00 00 09 01 00 00
lspci -x:
lspci -x: 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI
USB 1.1 Controller (rev 81)
lspci -x: 00: 06 11 38 30 17 00 10 02 81 00 03 0c 40 40 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 01 b4 00 00 00 00 00 00 00 00 00 00 43 10 ed 80
lspci -x: 30: 00 00 00 00 80 00 00 00 00 00 00 00 09 01 00 00
lspci -x:
lspci -x: 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI
USB 1.1 Controller (rev 81)
lspci -x: 00: 06 11 38 30 17 00 10 02 81 00 03 0c 40 40 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 01 b8 00 00 00 00 00 00 00 00 00 00 43 10 ed 80
lspci -x: 30: 00 00 00 00 80 00 00 00 00 00 00 00 09 01 00 00
lspci -x:
lspci -x: 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI
USB 1.1 Controller (rev 81)
lspci -x: 00: 06 11 38 30 17 00 10 02 81 00 03 0c 40 40 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 01 c0 00 00 00 00 00 00 00 00 00 00 43 10 ed 80
lspci -x: 30: 00 00 00 00 80 00 00 00 00 00 00 00 09 02 00 00
lspci -x:
lspci -x: 00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI
USB 1.1 Controller (rev 81)
lspci -x: 00: 06 11 38 30 17 00 10 02 81 00 03 0c 40 40 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 01 c4 00 00 00 00 00 00 00 00 00 00 43 10 ed 80
lspci -x: 30: 00 00 00 00 80 00 00 00 00 00 00 00 09 02 00 00
lspci -x:
lspci -x: 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
lspci -x: 00: 06 11 04 31 17 00 10 02 86 20 03 0c 40 40 80 00
lspci -x: 10: 00 00 f0 fd 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 ed 80
lspci -x: 30: 00 00 00 00 80 00 00 00 00 00 00 00 05 03 00 00
lspci -x:
lspci -x: 00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge
[KT600/K8T800/K8T890 South]
lspci -x: 00: 06 11 27 32 87 00 10 02 00 00 01 06 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 ed 80
lspci -x: 30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
lspci -x: 00: 06 11 59 30 01 00 10 02 60 00 01 04 00 00 00 00
lspci -x: 10: 01 c8 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 b0 80
lspci -x: 30: 00 00 00 00 c0 00 00 00 00 00 00 00 05 03 00 00
lspci -x:
lspci -x: 00:11.6 Communication controller: VIA Technologies, Inc. AC'97
Modem Controller (rev 80)
lspci -x: 00: 06 11 68 30 00 00 10 02 80 00 80 07 00 00 00 00
lspci -x: 10: 01 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 d0 00 00 00 00 00 00 00 00 03 00 00
lspci -x:
lspci -x: 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration
lspci -x: 00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Address Map
lspci -x: 00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] DRAM Controller
lspci -x: 00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Miscellaneous Control
lspci -x: 00: 22 10 03 11 00 00 00 00 00 00 00 06 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 01:00.0 VGA compatible controller: ATI Technologies Inc RV350
AS [Radeon 9550]
lspci -x: 00: 02 10 53 41 07 01 b0 02 00 00 00 03 40 40 80 00
lspci -x: 10: 08 00 00 e0 01 a0 00 00 00 00 60 fd 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 6d 19 18 10
lspci -x: 30: 00 00 50 fd 58 00 00 00 00 00 00 00 0b 01 08 00
lspci -x:
lspci -x: 01:00.1 Display controller: ATI Technologies Inc RV350 ??
[Radeon 9550] (Secondary)
lspci -x: 00: 02 10 73 41 07 00 b0 02 00 00 80 03 40 40 00 00
lspci -x: 10: 08 00 00 d0 00 00 40 fd 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 6d 19 19 10
lspci -x: 30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 08 00
lspci -x:
lsmod: Module                  Size  Used by
lsmod: sd_mod                 18448  0
lsmod: qnx4                   10484  0
lsmod: ntfs                  184468  0
lsmod: xfs                   481140  0
lsmod: reiserfs              210176  0
lsmod: jfs                   156124  0
lsmod: ext3                  115336  1
lsmod: jbd                    45460  1 ext3
lsmod: vfat                   11520  0
lsmod: fat                    45852  1 vfat
lsmod: eth1394                17412  0
lsmod: skge                   33040  0
lsmod: sk98lin               130272  0
lsmod: nls_iso8859_1           4224  4
lsmod: sbp2                   20232  0
lsmod: isofs                  31672  0
lsmod: ide_generic             1408  0 [permanent]
lsmod: pdc202xx_new            7936  0 [permanent]
lsmod: aec62xx                 6784  0 [permanent]
lsmod: alim15x3               11020  0 [permanent]
lsmod: amd74xx                12700  0 [permanent]
lsmod: atiixp                  5520  0 [permanent]
lsmod: cmd64x                 10140  0 [permanent]
lsmod: cs5520                  4608  0 [permanent]
lsmod: cs5530                  4864  0 [permanent]
lsmod: cs5535                  4224  0 [permanent]
lsmod: cy82c693                4356  0 [permanent]
lsmod: hpt34x                  4992  0 [permanent]
lsmod: it821x                  7812  0 [permanent]
lsmod: ns87415                 4168  0 [permanent]
lsmod: opti621                 4100  0 [permanent]
lsmod: pdc202xx_old            9472  0 [permanent]
lsmod: piix                    9220  0 [permanent]
lsmod: rz1000                  2688  0 [permanent]
lsmod: sc1200                  6656  0 [permanent]
lsmod: serverworks             8200  0 [permanent]
lsmod: siimage                10752  0 [permanent]
lsmod: sis5513                12424  0 [permanent]
lsmod: slc90e66                5120  0 [permanent]
lsmod: triflex                 3712  0 [permanent]
lsmod: trm290                  3972  0 [permanent]
lsmod: floppy                 52868  0
lsmod: usb_storage            69952  0
lsmod: vga16fb                11400  0
lsmod: vgastate                7808  1 vga16fb
lsmod: usbserial              28136  0
lsmod: usbkbd                  6656  0
lsmod: thermal                12680  0
lsmod: processor              21440  1 thermal
lsmod: fan                     4484  0
lsmod: ide_cd                 35104  0
lsmod: cdrom                  32288  1 ide_cd
lsmod: ide_disk               14976  3
lsmod: generic                 4356  0 [permanent]
lsmod: usbhid                 35040  0
lsmod: usbmouse                5376  0
lsmod: sata_via                8324  0
lsmod: libata                 60300  1 sata_via
lsmod: scsi_mod              120840  4 sd_mod,sbp2,usb_storage,libata
lsmod: via82cxxx               8324  0 [permanent]
lsmod: ide_core              107940  30
ide_generic,pdc202xx_new,aec62xx,alim15x3,amd74xx,atiixp,cmd64x,cs5520,cs5530,cs5535,cy82c693,hpt34x,it821x,ns87415,opti621,pdc202xx_old,piix,rz1000,sc1200,serverworks,siimage,sis5513,slc90e66,triflex,trm290,usb_storage,ide_cd,ide_disk,generic,via82cxxx
lsmod: evdev                   8960  2
lsmod: ohci1394               29488  0
lsmod: ieee1394               84536  3 eth1394,sbp2,ohci1394
lsmod: uhci_hcd               19464  0
lsmod: ehci_hcd               26888  0
lsmod: usbcore               108544  8
usb_storage,usbserial,usbkbd,usbhid,usbmouse,uhci_hcd,ehci_hcd
lsmod: parport_pc             31524  0
lsmod: parport                31944  1 parport_pc
lsmod: psmouse                34184  0
df: Filesystem           1k-blocks      Used Available Use% Mounted on
df: tmpfs                   518044       436    517608   0% /dev
df: tmpfs                   518044       436    517608   0% /dev
df: tmpfs                   518044       436    517608   0% /.dev
df: /dev/ide/host0/bus0/target0/lun0/part1 189303128   2649564
177037460   1% /target
free:               total         used         free       shared    
buffers
free:   Mem:      1036092      1002120        33972            0      
84096
free:  Swap:      3036244          432      3035812
free: Total:      4072336      1002552      3069784
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 34: cardctl: not
found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 35: cardctl: not
found
/proc/cpuinfo: processor    : 0
/proc/cpuinfo: vendor_id    : AuthenticAMD
/proc/cpuinfo: cpu family    : 15
/proc/cpuinfo: model        : 12
/proc/cpuinfo: model name    : AMD Athlon(tm) 64 Processor 3200+
/proc/cpuinfo: stepping    : 0
/proc/cpuinfo: cpu MHz        : 2203.193
/proc/cpuinfo: cache size    : 512 KB
/proc/cpuinfo: fdiv_bug    : no
/proc/cpuinfo: hlt_bug        : no
/proc/cpuinfo: f00f_bug    : no
/proc/cpuinfo: coma_bug    : no
/proc/cpuinfo: fpu        : yes
/proc/cpuinfo: fpu_exception    : yes
/proc/cpuinfo: cpuid level    : 1
/proc/cpuinfo: wp        : yes
/proc/cpuinfo: flags        : fpu vme de pse tsc msr pae mce cx8 apic
sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx
mmxext lm 3dnowext 3dnow up ts fid vid ttp
/proc/cpuinfo: bogomips    : 4411.17
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 0170-0177 : ide1
/proc/ioports: 01f0-01f7 : ide0
/proc/ioports: 02f8-02ff : serial
/proc/ioports: 0376-0376 : ide1
/proc/ioports: 0378-037a : parport0
/proc/ioports: 03c0-03df : vesafb
/proc/ioports: 03f6-03f6 : ide0
/proc/ioports: 03f8-03ff : serial
/proc/ioports: 0800-0803 : PM1a_EVT_BLK
/proc/ioports: 0804-0805 : PM1a_CNT_BLK
/proc/ioports: 0808-080b : PM_TMR
/proc/ioports: 0810-0815 : ACPI CPU throttle
/proc/ioports: 0820-0823 : GPE0_BLK
/proc/ioports: 1000-10ff : 0000:00:11.6
/proc/ioports: a000-afff : PCI Bus #01
/proc/ioports:   a000-a0ff : 0000:01:00.0
/proc/ioports: b000-b0ff : 0000:00:0a.0
/proc/ioports:   b000-b0ff : sk98lin
/proc/ioports: b400-b41f : 0000:00:10.0
/proc/ioports:   b400-b41f : uhci_hcd
/proc/ioports: b800-b81f : 0000:00:10.1
/proc/ioports:   b800-b81f : uhci_hcd
/proc/ioports: c000-c01f : 0000:00:10.2
/proc/ioports:   c000-c01f : uhci_hcd
/proc/ioports: c400-c41f : 0000:00:10.3
/proc/ioports:   c400-c41f : uhci_hcd
/proc/ioports: c800-c8ff : 0000:00:11.5
/proc/ioports: d000-d0ff : 0000:00:0f.0
/proc/ioports:   d000-d0ff : sata_via
/proc/ioports: d400-d40f : 0000:00:0f.0
/proc/ioports:   d400-d40f : sata_via
/proc/ioports: d800-d803 : 0000:00:0f.0
/proc/ioports:   d800-d803 : sata_via
/proc/ioports: e000-e007 : 0000:00:0f.0
/proc/ioports:   e000-e007 : sata_via
/proc/ioports: e400-e403 : 0000:00:0f.0
/proc/ioports:   e400-e403 : sata_via
/proc/ioports: e800-e807 : 0000:00:0f.0
/proc/ioports:   e800-e807 : sata_via
/proc/ioports: ec00-ec7f : 0000:00:07.0
/proc/ioports: fc00-fc0f : 0000:00:0f.1
/proc/ioports:   fc00-fc07 : ide0
/proc/ioports:   fc08-fc0f : ide1
/proc/iomem: 00000000-0009fbff : System RAM
/proc/iomem:   00000000-00000000 : Crash kernel
/proc/iomem: 0009fc00-0009ffff : reserved
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000ccfff : Video ROM
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-3ff2ffff : System RAM
/proc/iomem:   00100000-0026c0f2 : Kernel code
/proc/iomem:   0026c0f3-002f9cef : Kernel data
/proc/iomem: 3ff30000-3ff3ffff : ACPI Tables
/proc/iomem: 3ff40000-3ffeffff : ACPI Non-volatile Storage
/proc/iomem: 3fff0000-3fffffff : reserved
/proc/iomem: b7f00000-f7efffff : PCI Bus #01
/proc/iomem:   d0000000-dfffffff : 0000:01:00.1
/proc/iomem:   e0000000-efffffff : 0000:01:00.0
/proc/iomem:     e0000000-e0ffffff : vesafb
/proc/iomem: f8000000-fbffffff : 0000:00:00.0
/proc/iomem: fd100000-fd6fffff : PCI Bus #01
/proc/iomem:   fd400000-fd40ffff : 0000:01:00.1
/proc/iomem:   fd500000-fd51ffff : 0000:01:00.0
/proc/iomem:   fd600000-fd60ffff : 0000:01:00.0
/proc/iomem: fda00000-fda007ff : 0000:00:07.0
/proc/iomem:   fda00000-fda007ff : ohci1394
/proc/iomem: fdd00000-fdd1ffff : 0000:00:0a.0
/proc/iomem: fde00000-fde03fff : 0000:00:0a.0
/proc/iomem:   fde00000-fde03fff : sk98lin
/proc/iomem: fdf00000-fdf000ff : 0000:00:10.4
/proc/iomem:   fdf00000-fdf000ff : ehci_hcd
/proc/iomem: fff80000-ffffffff : reserved
/proc/interrupts:            CPU0     
/proc/interrupts:   0:    6177519    IO-APIC-edge  timer
/proc/interrupts:   1:        418    IO-APIC-edge  i8042
/proc/interrupts:   7:          0    IO-APIC-edge  parport0
/proc/interrupts:   9:          0   IO-APIC-level  acpi
/proc/interrupts:  14:     121284    IO-APIC-edge  ide0
/proc/interrupts:  15:       2136    IO-APIC-edge  ide1
/proc/interrupts: 169:      10755   IO-APIC-level  ehci_hcd:usb1,
uhci_hcd:usb2, uhci_hcd:usb3, uhci_hcd:usb4, uhci_hcd:usb5
/proc/interrupts: 177:          2   IO-APIC-level  ohci1394
/proc/interrupts: 185:          0   IO-APIC-level  libata
/proc/interrupts: 193:     685616   IO-APIC-level  sk98lin
/proc/interrupts: NMI:          0
/proc/interrupts: LOC:    6177319
/proc/interrupts: ERR:          0
/proc/interrupts: MIS:          0
/proc/meminfo: MemTotal:      1036092 kB
/proc/meminfo: MemFree:         33804 kB
/proc/meminfo: Buffers:         84096 kB
/proc/meminfo: Cached:         769740 kB
/proc/meminfo: SwapCached:          0 kB
/proc/meminfo: Active:         383432 kB
/proc/meminfo: Inactive:       554844 kB
/proc/meminfo: HighTotal:           0 kB
/proc/meminfo: HighFree:            0 kB
/proc/meminfo: LowTotal:      1036092 kB
/proc/meminfo: LowFree:         33804 kB
/proc/meminfo: SwapTotal:     3036244 kB
/proc/meminfo: SwapFree:      3035812 kB
/proc/meminfo: Dirty:            4020 kB
/proc/meminfo: Writeback:           0 kB
/proc/meminfo: Mapped:          91168 kB
/proc/meminfo: Slab:            52648 kB
/proc/meminfo: CommitLimit:   3554288 kB
/proc/meminfo: Committed_AS:   133896 kB
/proc/meminfo: PageTables:        316 kB
/proc/meminfo: VmallocTotal:   253648 kB
/proc/meminfo: VmallocUsed:     11784 kB
/proc/meminfo: VmallocChunk:   240848 kB
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
/proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd event0
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=4 2000000 3802078 f840d001 f2ffffdf
ffefffff ffffffff fffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0003 Vendor=046d Product=c03e Version=2000
/proc/bus/input/devices: N: Name="Logitech USB-PS/2 Optical Mouse"
/proc/bus/input/devices: P: Phys=usb-0000:00:10.0-2/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input1
/proc/bus/input/devices: H: Handlers=event1
/proc/bus/input/devices: B: EV=7
/proc/bus/input/devices: B: KEY=1f0000 0 0 0 0 0 0 0 0
/proc/bus/input/devices: B: REL=103
/proc/bus/input/devices:
dmidecode: # dmidecode 2.8
dmidecode: SMBIOS 2.3 present.
dmidecode: 68 structures occupying 2195 bytes.
dmidecode: Table at 0x000F0520.
dmidecode:
dmidecode: Handle 0x0000, DMI type 0, 20 bytes
dmidecode: BIOS Information
dmidecode:     Vendor: American Megatrends Inc.
dmidecode:     Version: 1004.006
dmidecode:     Release Date: 08/03/2004
dmidecode:     Address: 0xF0000
dmidecode:     Runtime Size: 64 kB
dmidecode:     ROM Size: 512 kB
dmidecode:     Characteristics:
dmidecode:         ISA is supported
dmidecode:         PCI is supported
dmidecode:         PNP is supported
dmidecode:         APM is supported
dmidecode:         BIOS is upgradeable
dmidecode:         BIOS shadowing is allowed
dmidecode:         ESCD support is available
dmidecode:         Boot from CD is supported
dmidecode:         Selectable boot is supported
dmidecode:         BIOS ROM is socketed
dmidecode:         EDD is supported
dmidecode:         5.25"/1.2 MB floppy services are supported (int 13h)
dmidecode:         3.5"/720 KB floppy services are supported (int 13h)
dmidecode:         3.5"/2.88 MB floppy services are supported (int 13h)
dmidecode:         Print screen service is supported (int 5h)
dmidecode:         8042 keyboard services are supported (int 9h)
dmidecode:         Serial services are supported (int 14h)
dmidecode:         Printer services are supported (int 17h)
dmidecode:         CGA/mono video services are supported (int 10h)
dmidecode:         ACPI is supported
dmidecode:         USB legacy is supported
dmidecode:         AGP is supported
dmidecode:         LS-120 boot is supported
dmidecode:         ATAPI Zip drive boot is supported
dmidecode:         BIOS boot specification is supported
dmidecode:
dmidecode: Handle 0x0001, DMI type 1, 25 bytes
dmidecode: System Information
dmidecode:     Manufacturer: To Be Filled By O.E.M.
dmidecode:     Product Name: To Be Filled By O.E.M.
dmidecode:     Version: To Be Filled By O.E.M.
dmidecode:     Serial Number: To Be Filled By O.E.M.
dmidecode:     UUID: 48C9B774-4B28-D911-8CC2-90A1B5477937
dmidecode:     Wake-up Type: PCI PME#
dmidecode:
dmidecode: Handle 0x0002, DMI type 2, 8 bytes
dmidecode: Base Board Information
dmidecode:     Manufacturer: ASUSTeK Computer Inc.
dmidecode:     Product Name: K8VSEDX
dmidecode:     Version: Rev 2.00
dmidecode:     Serial Number: MB-1234567890
dmidecode:
dmidecode: Handle 0x0003, DMI type 3, 17 bytes
dmidecode: Chassis Information
dmidecode:     Manufacturer: Chassis Manufacture
dmidecode:     Type: Desktop
dmidecode:     Lock: Present
dmidecode:     Version: Chassis Version
dmidecode:     Serial Number: Chassis Serial Number
dmidecode:     Asset Tag: Asset-1234567890
dmidecode:     Boot-up State: Safe
dmidecode:     Power Supply State: Safe
dmidecode:     Thermal State: Safe
dmidecode:     Security Status: None
dmidecode:     OEM Information: 0x00000001
dmidecode:
dmidecode: Handle 0x0004, DMI type 4, 35 bytes
dmidecode: Processor Information
dmidecode:     Socket Designation: Socket 754
dmidecode:     Type: Central Processor
dmidecode:     Family: Athlon 64
dmidecode:     Manufacturer: AMD            
dmidecode:     ID: C0 0F 00 00 FF FB 8B 07
dmidecode:     Signature: Extended Family 0, Model C, Stepping 0
dmidecode:     Flags:
dmidecode:         FPU (Floating-point unit on-chip)
dmidecode:         VME (Virtual mode extension)
dmidecode:         DE (Debugging extension)
dmidecode:         PSE (Page size extension)
dmidecode:         TSC (Time stamp counter)
dmidecode:         MSR (Model specific registers)
dmidecode:         PAE (Physical address extension)
dmidecode:         MCE (Machine check exception)
dmidecode:         CX8 (CMPXCHG8 instruction supported)
dmidecode:         APIC (On-chip APIC hardware supported)
dmidecode:         SEP (Fast system call)
dmidecode:         MTRR (Memory type range registers)
dmidecode:         PGE (Page global enable)
dmidecode:         MCA (Machine check architecture)
dmidecode:         CMOV (Conditional move instruction supported)
dmidecode:         PAT (Page attribute table)
dmidecode:         PSE-36 (36-bit page size extension)
dmidecode:         CLFSH (CLFLUSH instruction supported)
dmidecode:         MMX (MMX technology supported)
dmidecode:         FXSR (Fast floating-point save and restore)
dmidecode:         SSE (Streaming SIMD extensions)
dmidecode:         SSE2 (Streaming SIMD extensions 2)
dmidecode:     Version: AMD Athlon(tm) 64 Processor 3200+                 
dmidecode:     Voltage: 1.5 V
dmidecode:     External Clock: 200 MHz
dmidecode:     Max Speed: 2400 MHz
dmidecode:     Current Speed: 2200 MHz
dmidecode:     Status: Populated, Enabled
dmidecode:     Upgrade: Socket 754
dmidecode:     L1 Cache Handle: 0x0005
dmidecode:     L2 Cache Handle: 0x0006
dmidecode:     L3 Cache Handle: Not Provided
dmidecode:     Serial Number: To Be Filled By O.E.M.
dmidecode:     Asset Tag: To Be Filled By O.E.M.
dmidecode:     Part Number: To Be Filled By O.E.M.
dmidecode:
dmidecode: Handle 0x0005, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode:     Socket Designation: L1-Cache
dmidecode:     Configuration: Enabled, Not Socketed, Level 1
dmidecode:     Operational Mode: Varies With Memory Address
dmidecode:     Location: Internal
dmidecode:     Installed Size: 64 KB
dmidecode:     Maximum Size: 64 KB
dmidecode:     Supported SRAM Types:
dmidecode:         Pipeline Burst
dmidecode:     Installed SRAM Type: Pipeline Burst
dmidecode:     Speed: Unknown
dmidecode:     Error Correction Type: Single-bit ECC
dmidecode:     System Type: Data
dmidecode:     Associativity: 4-way Set-associative
dmidecode:
dmidecode: Handle 0x0006, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode:     Socket Designation: L2-Cache
dmidecode:     Configuration: Enabled, Not Socketed, Level 2
dmidecode:     Operational Mode: Varies With Memory Address
dmidecode:     Location: Internal
dmidecode:     Installed Size: 512 KB
dmidecode:     Maximum Size: 512 KB
dmidecode:     Supported SRAM Types:
dmidecode:         Pipeline Burst
dmidecode:     Installed SRAM Type: Pipeline Burst
dmidecode:     Speed: Unknown
dmidecode:     Error Correction Type: Single-bit ECC
dmidecode:     System Type: Unified
dmidecode:     Associativity: 4-way Set-associative
dmidecode:
dmidecode: Handle 0x0007, DMI type 5, 22 bytes
dmidecode: Memory Controller Information
dmidecode:     Error Detecting Method: 64-bit ECC
dmidecode:     Error Correcting Capabilities:
dmidecode:         None
dmidecode:         Single-bit Error Correcting
dmidecode:         Double-bit Error Correcting
dmidecode:         Error Scrubbing
dmidecode:     Supported Interleave: One-way Interleave
dmidecode:     Current Interleave: One-way Interleave
dmidecode:     Maximum Memory Module Size: 1024 MB
dmidecode:     Maximum Total Memory Size: 3072 MB
dmidecode:     Supported Speeds:
dmidecode:         70 ns
dmidecode:         60 ns
dmidecode:         50 ns
dmidecode:     Supported Memory Types:
dmidecode:         ECC
dmidecode:         SIMM
dmidecode:         DIMM
dmidecode:         SDRAM
dmidecode:     Memory Module Voltage: 2.9 V
dmidecode:     Associated Memory Slots: 3
dmidecode:         0x0008
dmidecode:         0x0009
dmidecode:         0x000A
dmidecode:     Enabled Error Correcting Capabilities:
dmidecode:         None
dmidecode:         Single-bit Error Correcting
dmidecode:         Double-bit Error Correcting
dmidecode:         Error Scrubbing
dmidecode:
dmidecode: Handle 0x0008, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode:     Socket Designation: DIMM0
dmidecode:     Bank Connections: 1 0
dmidecode:     Current Speed: Unknown
dmidecode:     Type: Unknown
dmidecode:     Installed Size: Not Installed
dmidecode:     Enabled Size: Not Installed
dmidecode:     Error Status: OK
dmidecode:
dmidecode: Handle 0x0009, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode:     Socket Designation: DIMM1
dmidecode:     Bank Connections: 3 2
dmidecode:     Current Speed: Unknown
dmidecode:     Type: DIMM SDRAM
dmidecode:     Installed Size: 512 MB (Double-bank Connection)
dmidecode:     Enabled Size: 512 MB (Double-bank Connection)
dmidecode:     Error Status: OK
dmidecode:
dmidecode: Handle 0x000A, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode:     Socket Designation: DIMM2
dmidecode:     Bank Connections: 5 4
dmidecode:     Current Speed: Unknown
dmidecode:     Type: DIMM SDRAM
dmidecode:     Installed Size: 512 MB (Double-bank Connection)
dmidecode:     Enabled Size: 512 MB (Double-bank Connection)
dmidecode:     Error Status: OK
dmidecode:
dmidecode: Handle 0x000B, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode:     Internal Reference Designator: PS/2 Mouse
dmidecode:     Internal Connector Type: None
dmidecode:     External Reference Designator: PS/2 Mouse
dmidecode:     External Connector Type: PS/2
dmidecode:     Port Type: Mouse Port
dmidecode:
dmidecode: Handle 0x000C, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode:     Internal Reference Designator: PS/2 Keyboard
dmidecode:     Internal Connector Type: None
dmidecode:     External Reference Designator: PS/2 Keyboard
dmidecode:     External Connector Type: PS/2
dmidecode:     Port Type: Keyboard Port
dmidecode:
dmidecode: Handle 0x000D, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode:     Internal Reference Designator: USB1
dmidecode:     Internal Connector Type: None
dmidecode:     External Reference Designator: USB1
dmidecode:     External Connector Type: Access Bus (USB)
dmidecode:     Port Type: USB
dmidecode:
dmidecode: Handle 0x000E, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode:     Internal Reference Designator: USB2
dmidecode:     Internal Connector Type: None
dmidecode:     External Reference Designator: USB2
dmidecode:     External Connector Type: Access Bus (USB)
dmidecode:     Port Type: USB
dmidecode:
dmidecode: Handle 0x000F, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode:     Internal Reference Designator: USB3
dmidecode:     Internal Connector Type: None
dmidecode:     External Reference Designator: USB3
dmidecode:     External Connector Type: Access Bus (USB)
dmidecode:     Port Type: USB
dmidecode:
dmidecode: Handle 0x0010, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode:     Internal Reference Designator: USB4
dmidecode:     Internal Connector Type: None
dmidecode:     External Reference Designator: USB4
dmidecode:     External Connector Type: Access Bus (USB)
dmidecode:     Port Type: USB
dmidecode:
dmidecode: Handle 0x0011, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode:     Internal Reference Designator: USB5
dmidecode:     Internal Connector Type: None
dmidecode:     External Reference Designator: USB5
dmidecode:     External Connector Type: Access Bus (USB)
dmidecode:     Port Type: USB
dmidecode:
dmidecode: Handle 0x0012, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode:     Internal Reference Designator: USB6
dmidecode:     Internal Connector Type: None
dmidecode:     External Reference Designator: USB6
dmidecode:     External Connector Type: Access Bus (USB)
dmidecode:     Port Type: USB
dmidecode:
dmidecode: Handle 0x0013, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode:     Internal Reference Designator: USB7
dmidecode:     Internal Connector Type: None
dmidecode:     External Reference Designator: USB7
dmidecode:     External Connector Type: Access Bus (USB)
dmidecode:     Port Type: USB
dmidecode:
dmidecode: Handle 0x0014, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode:     Internal Reference Designator: USB8
dmidecode:     Internal Connector Type: None
dmidecode:     External Reference Designator: USB8
dmidecode:     External Connector Type: Access Bus (USB)
dmidecode:     Port Type: USB
dmidecode:
dmidecode: Handle 0x0015, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode:     Internal Reference Designator: LPT1
dmidecode:     Internal Connector Type: None
dmidecode:     External Reference Designator: LPT 1
dmidecode:     External Connector Type: DB-25 male
dmidecode:     Port Type: Parallel Port ECP/EPP
dmidecode:
dmidecode: Handle 0x0016, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode:     Internal Reference Designator: Audio Mic In
dmidecode:     Internal Connector Type: None
dmidecode:     External Reference Designator: Audio Mic In
dmidecode:     External Connector Type: Mini Jack (headphones)
dmidecode:     Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0017, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode:     Internal Reference Designator: Audio Line In
dmidecode:     Internal Connector Type: None
dmidecode:     External Reference Designator: Audio Line In
dmidecode:     External Connector Type: Mini Jack (headphones)
dmidecode:     Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0018, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode:     Internal Reference Designator: Audio Line Out
dmidecode:     Internal Connector Type: None
dmidecode:     External Reference Designator: Audio Line Out
dmidecode:     External Connector Type: Mini Jack (headphones)
dmidecode:     Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0019, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode:     Internal Reference Designator: LAN
dmidecode:     Internal Connector Type: None
dmidecode:     External Reference Designator: LAN
dmidecode:     External Connector Type: RJ-45
dmidecode:     Port Type: Network Port
dmidecode:
dmidecode: Handle 0x001A, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode:     Internal Reference Designator: COM 1
dmidecode:     Internal Connector Type: None
dmidecode:     External Reference Designator: COM 1
dmidecode:     External Connector Type: DB-9 male
dmidecode:     Port Type: Serial Port 16550A Compatible
dmidecode:
dmidecode: Handle 0x001B, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode:     Internal Reference Designator: MIDI
dmidecode:     Internal Connector Type: None
dmidecode:     External Reference Designator: MIDI
dmidecode:     External Connector Type: DB-15 female
dmidecode:     Port Type: MIDI Port
dmidecode:
dmidecode: Handle 0x001C, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode:     Internal Reference Designator: Joy Stick
dmidecode:     Internal Connector Type: None
dmidecode:     External Reference Designator: Joy Stick
dmidecode:     External Connector Type: DB-15 female
dmidecode:     Port Type: Joystick Port
dmidecode:
dmidecode: Handle 0x001D, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode:     Internal Reference Designator: COM 2
dmidecode:     Internal Connector Type: None
dmidecode:     External Reference Designator: COM 2
dmidecode:     External Connector Type: DB-9 male
dmidecode:     Port Type: Serial Port 16550A Compatible
dmidecode:
dmidecode: Handle 0x001E, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode:     Internal Reference Designator: FireWire 1
dmidecode:     Internal Connector Type: None
dmidecode:     External Reference Designator: FireWire 1
dmidecode:     External Connector Type: IEEE 1394
dmidecode:     Port Type: Firewire (IEEE P1394)
dmidecode:
dmidecode: Handle 0x001F, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode:     Internal Reference Designator: FireWire 2
dmidecode:     Internal Connector Type: None
dmidecode:     External Reference Designator: FireWire 2
dmidecode:     External Connector Type: IEEE 1394
dmidecode:     Port Type: Firewire (IEEE P1394)
dmidecode:
dmidecode: Handle 0x0020, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode:     Internal Reference Designator: AUX
dmidecode:     Internal Connector Type: On Board Sound Input From CD-ROM
dmidecode:     External Reference Designator: Not Specified
dmidecode:     External Connector Type: None
dmidecode:     Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0021, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode:     Internal Reference Designator: CD
dmidecode:     Internal Connector Type: On Board Sound Input From CD-ROM
dmidecode:     External Reference Designator: Not Specified
dmidecode:     External Connector Type: None
dmidecode:     Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0022, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode:     Internal Reference Designator: PRI_IDE
dmidecode:     Internal Connector Type: On Board IDE
dmidecode:     External Reference Designator: Not Specified
dmidecode:     External Connector Type: None
dmidecode:     Port Type: Other
dmidecode:
dmidecode: Handle 0x0023, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode:     Internal Reference Designator: SEC_IDE
dmidecode:     Internal Connector Type: On Board IDE
dmidecode:     External Reference Designator: Not Specified
dmidecode:     External Connector Type: None
dmidecode:     Port Type: Other
dmidecode:
dmidecode: Handle 0x0024, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode:     Internal Reference Designator: FLOPPY
dmidecode:     Internal Connector Type: On Board Floppy
dmidecode:     External Reference Designator: Not Specified
dmidecode:     External Connector Type: None
dmidecode:     Port Type: Other
dmidecode:
dmidecode: Handle 0x0025, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode:     Internal Reference Designator: CHA_FAN
dmidecode:     Internal Connector Type: Other
dmidecode:     External Reference Designator: Not Specified
dmidecode:     External Connector Type: None
dmidecode:     Port Type: Other
dmidecode:
dmidecode: Handle 0x0026, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode:     Internal Reference Designator: CPU_FAN
dmidecode:     Internal Connector Type: Other
dmidecode:     External Reference Designator: Not Specified
dmidecode:     External Connector Type: None
dmidecode:     Port Type: Other
dmidecode:
dmidecode: Handle 0x0027, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode:     Internal Reference Designator: MAIN POWER
dmidecode:     Internal Connector Type: Other
dmidecode:     External Reference Designator: Not Specified
dmidecode:     External Connector Type: None
dmidecode:     Port Type: Other
dmidecode:
dmidecode: Handle 0x0028, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode:     Internal Reference Designator: CHASSIS
dmidecode:     Internal Connector Type: Other
dmidecode:     External Reference Designator: Not Specified
dmidecode:     External Connector Type: None
dmidecode:     Port Type: Other
dmidecode:
dmidecode: Handle 0x0029, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode:     Internal Reference Designator: ATXPWR
dmidecode:     Internal Connector Type: Other
dmidecode:     External Reference Designator: Not Specified
dmidecode:     External Connector Type: None
dmidecode:     Port Type: Other
dmidecode:
dmidecode: Handle 0x002A, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode:     Internal Reference Designator: FP_AUDIO
dmidecode:     Internal Connector Type: Other
dmidecode:     External Reference Designator: Not Specified
dmidecode:     External Connector Type: None
dmidecode:     Port Type: Other
dmidecode:
dmidecode: Handle 0x002B, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode:     Internal Reference Designator: SATA1
dmidecode:     Internal Connector Type: Other
dmidecode:     External Reference Designator: Not Specified
dmidecode:     External Connector Type: None
dmidecode:     Port Type: Other
dmidecode:
dmidecode: Handle 0x002C, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode:     Internal Reference Designator: SATA2
dmidecode:     Internal Connector Type: Other
dmidecode:     External Reference Designator: Not Specified
dmidecode:     External Connector Type: None
dmidecode:     Port Type: Other
dmidecode:
dmidecode: Handle 0x002D, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode:     Internal Reference Designator: PWR_FAN
dmidecode:     Internal Connector Type: Other
dmidecode:     External Reference Designator: Not Specified
dmidecode:     External Connector Type: None
dmidecode:     Port Type: Other
dmidecode:
dmidecode: Handle 0x002E, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode:     Internal Reference Designator: PRI_SATA
dmidecode:     Internal Connector Type: Other
dmidecode:     External Reference Designator: Not Specified
dmidecode:     External Connector Type: None
dmidecode:     Port Type: Other
dmidecode:
dmidecode: Handle 0x002F, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode:     Internal Reference Designator: SEC_SATA
dmidecode:     Internal Connector Type: Other
dmidecode:     External Reference Designator: Not Specified
dmidecode:     External Connector Type: None
dmidecode:     Port Type: Other
dmidecode:
dmidecode: Handle 0x0030, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode:     Internal Reference Designator: PRI_RAID
dmidecode:     Internal Connector Type: Other
dmidecode:     External Reference Designator: Not Specified
dmidecode:     External Connector Type: None
dmidecode:     Port Type: Other
dmidecode:
dmidecode: Handle 0x0031, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode:     Designation: AGP
dmidecode:     Type: 32-bit AGP 8x
dmidecode:     Current Usage: In Use
dmidecode:     Length: Short
dmidecode:     Characteristics:
dmidecode:         3.3 V is provided
dmidecode:         Opening is shared
dmidecode:         PME signal is supported
dmidecode:
dmidecode: Handle 0x0032, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode:     Designation: PCI1
dmidecode:     Type: 32-bit PCI
dmidecode:     Current Usage: Available
dmidecode:     Length: Short
dmidecode:     ID: 1
dmidecode:     Characteristics:
dmidecode:         3.3 V is provided
dmidecode:         Opening is shared
dmidecode:         PME signal is supported
dmidecode:
dmidecode: Handle 0x0033, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode:     Designation: PCI2
dmidecode:     Type: 32-bit PCI
dmidecode:     Current Usage: Available
dmidecode:     Length: Short
dmidecode:     ID: 2
dmidecode:     Characteristics:
dmidecode:         3.3 V is provided
dmidecode:         Opening is shared
dmidecode:         PME signal is supported
dmidecode:
dmidecode: Handle 0x0034, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode:     Designation: PCI3
dmidecode:     Type: 32-bit PCI
dmidecode:     Current Usage: Available
dmidecode:     Length: Short
dmidecode:     ID: 3
dmidecode:     Characteristics:
dmidecode:         3.3 V is provided
dmidecode:         Opening is shared
dmidecode:         PME signal is supported
dmidecode:
dmidecode: Handle 0x0035, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode:     Designation: PCI4
dmidecode:     Type: 32-bit PCI
dmidecode:     Current Usage: Available
dmidecode:     Length: Short
dmidecode:     ID: 4
dmidecode:     Characteristics:
dmidecode:         3.3 V is provided
dmidecode:         Opening is shared
dmidecode:         PME signal is supported
dmidecode:
dmidecode: Handle 0x0036, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode:     Designation: PCI5
dmidecode:     Type: 32-bit PCI
dmidecode:     Current Usage: Available
dmidecode:     Length: Short
dmidecode:     ID: 5
dmidecode:     Characteristics:
dmidecode:         3.3 V is provided
dmidecode:         Opening is shared
dmidecode:         PME signal is supported
dmidecode:
dmidecode: Handle 0x0037, DMI type 10, 6 bytes
dmidecode: On Board Device Information
dmidecode:     Type: Video
dmidecode:     Status: Enabled
dmidecode:     Description:   To Be Filled By O.E.M.
dmidecode:
dmidecode: Handle 0x0038, DMI type 11, 5 bytes
dmidecode: OEM Strings
dmidecode:     String 1: To Be Filled By O.E.M.
dmidecode:     String 2: To Be Filled By O.E.M.
dmidecode:     String 3: To Be Filled By O.E.M.
dmidecode:     String 4: To Be Filled By O.E.M.
dmidecode:
dmidecode: Handle 0x0039, DMI type 13, 22 bytes
dmidecode: BIOS Language Information
dmidecode:     Installable Languages: 3
dmidecode:         en|US|iso8859-1
dmidecode:         de|DE|iso8859-1
dmidecode:         fr|FR|iso8859-1
dmidecode:     Currently Installed Language: en|US|iso8859-1
dmidecode:
dmidecode: Handle 0x003A, DMI type 16, 15 bytes
dmidecode: Physical Memory Array
dmidecode:     Location: System Board Or Motherboard
dmidecode:     Use: System Memory
dmidecode:     Error Correction Type: None
dmidecode:     Maximum Capacity: 4 GB
dmidecode:     Error Information Handle: Not Provided
dmidecode:     Number Of Devices: 3
dmidecode:
dmidecode: Handle 0x003B, DMI type 19, 15 bytes
dmidecode: Memory Array Mapped Address
dmidecode:     Starting Address: 0x00000000000
dmidecode:     Ending Address: 0x000000003FF
dmidecode:     Range Size: 1 kB
dmidecode:     Physical Array Handle: 0x003A
dmidecode:     Partition Width: 0
dmidecode:
dmidecode: Handle 0x003C, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode:     Array Handle: 0x003A
dmidecode:     Error Information Handle: Not Provided
dmidecode:     Total Width: Unknown
dmidecode:     Data Width: Unknown
dmidecode:     Size: No Module Installed
dmidecode:     Form Factor: DIMM
dmidecode:     Set: None
dmidecode:     Locator: DIMM0
dmidecode:     Bank Locator: BANK0
dmidecode:     Type: Unknown
dmidecode:     Type Detail: Unknown
dmidecode:     Speed: Unknown
dmidecode:     Manufacturer: Manufacturer0
dmidecode:     Serial Number: SerNum0
dmidecode:     Asset Tag: AssetTagNum0
dmidecode:     Part Number: PartNum0
dmidecode:
dmidecode: Handle 0x003D, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode:     Starting Address: 0x00000000000
dmidecode:     Ending Address: 0x000000003FF
dmidecode:     Range Size: 1 kB
dmidecode:     Physical Device Handle: 0x003C
dmidecode:     Memory Array Mapped Address Handle: 0x003B
dmidecode:     Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x003E, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode:     Array Handle: 0x003A
dmidecode:     Error Information Handle: Not Provided
dmidecode:     Total Width: 64 bits
dmidecode:     Data Width: 64 bits
dmidecode:     Size: 512 MB
dmidecode:     Form Factor: DIMM
dmidecode:     Set: None
dmidecode:     Locator: DIMM1
dmidecode:     Bank Locator: BANK1
dmidecode:     Type: SDRAM
dmidecode:     Type Detail: Synchronous
dmidecode:     Speed: Unknown
dmidecode:     Manufacturer: Manufacturer1
dmidecode:     Serial Number: SerNum1
dmidecode:     Asset Tag: AssetTagNum1
dmidecode:     Part Number: PartNum1
dmidecode:
dmidecode: Handle 0x003F, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode:     Starting Address: 0x00080000000
dmidecode:     Ending Address: 0x0009FFFFFFF
dmidecode:     Range Size: 512 MB
dmidecode:     Physical Device Handle: 0x003E
dmidecode:     Memory Array Mapped Address Handle: 0x003B
dmidecode:     Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x0040, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode:     Array Handle: 0x003A
dmidecode:     Error Information Handle: Not Provided
dmidecode:     Total Width: 64 bits
dmidecode:     Data Width: 64 bits
dmidecode:     Size: 512 MB
dmidecode:     Form Factor: DIMM
dmidecode:     Set: None
dmidecode:     Locator: DIMM2
dmidecode:     Bank Locator: BANK2
dmidecode:     Type: SDRAM
dmidecode:     Type Detail: Synchronous
dmidecode:     Speed: Unknown
dmidecode:     Manufacturer: Manufacturer2
dmidecode:     Serial Number: SerNum2
dmidecode:     Asset Tag: AssetTagNum2
dmidecode:     Part Number: PartNum2
dmidecode:
dmidecode: Handle 0x0041, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode:     Starting Address: 0x00000000000
dmidecode:     Ending Address: 0x0001FFFFFFF
dmidecode:     Range Size: 512 MB
dmidecode:     Physical Device Handle: 0x0040
dmidecode:     Memory Array Mapped Address Handle: 0x003B
dmidecode:     Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x0042, DMI type 32, 20 bytes
dmidecode: System Boot Information
dmidecode:     Status: No errors detected
dmidecode:
dmidecode: Handle 0x0043, DMI type 127, 4 bytes
dmidecode: End Of Table
dmidecode:
dfbinfo: (*) DirectFB/Config: Parsing config file '/etc/directfbrc'.
dfbinfo:
dfbinfo:        ---------------------- DirectFB v0.9.25
---------------------
dfbinfo:              (c) 2000-2002  convergence integrated media GmbH
dfbinfo:              (c) 2002-2004  convergence GmbH                 
dfbinfo:         -----------------------------------------------------------
dfbinfo:
dfbinfo: (*) DirectFB/Core: Single Application Core. (2006-10-17 10:15)
dfbinfo: (*) Direct/Memcpy: Using libc memcpy()
dfbinfo: (*) Direct/Thread: Running 'VT Switcher' (CRITICAL, 21861)...
dfbinfo: (*) Direct/Thread: Running 'Keyboard Input' (INPUT, 21862)...
dfbinfo:  (!!!)  *** UNIMPLEMENTED [fusion_reactor_set_lock] ***
[../../../lib/fusion/reactor.c:853]
dfbinfo: (*) DirectFB/Input: Keyboard 0.9 (convergence integrated media
GmbH)
dfbinfo: (*) Direct/Thread: Running 'Linux Input' (INPUT, 21863)...
dfbinfo: (*) DirectFB/Input: AT Translated Set 2 keyboard (1) 0.1
(convergence integrated media GmbH)
dfbinfo: (*) Direct/Thread: Running 'Linux Input' (INPUT, 21864)...
dfbinfo: (*) DirectFB/Input: Logitech USB-PS/2 Optical Mouse (2) 0.1
(convergence integrated media GmbH)
dfbinfo: (*) DirectFB/Graphics: Generic Software Rasterizer 0.6
(convergence integrated media GmbH)
dfbinfo: (*) DirectFB/Core/WM: Default 0.2 (Convergence GmbH)
dfbinfo:
dfbinfo:
dfbinfo: Screen (00) FBDev Primary Screen            (primary screen)
dfbinfo:    Caps: VSYNC POWER_MANAGEMENT
dfbinfo:
dfbinfo:      Layer (00) FBDev Primary Layer             (primary layer)
dfbinfo:         Type:    GRAPHICS
dfbinfo:         Caps:    SURFACE BRIGHTNESS CONTRAST SATURATION
dfbinfo:
dfbinfo:
dfbinfo: Input (00) Keyboard                        (primary keyboard)
dfbinfo:    Type: KEYBOARD
dfbinfo:    Caps: KEYS
dfbinfo:
dfbinfo: Input (10) AT Translated Set 2 keyboard
dfbinfo:    Type: KEYBOARD
dfbinfo:    Caps: KEYS
dfbinfo:
dfbinfo: Input (01) Logitech USB-PS/2 Optical Mouse  (primary mouse)
dfbinfo:    Type: MOUSE
dfbinfo:    Caps: AXES BUTTONS
dfbinfo:    Max. Axis: 2
dfbinfo:    Max. Button: 4
dfbinfo:

==============================================
Installer status:
==============================================
Package: ttf-thai-tlwg-udeb
Status: install ok unpacked
Version: 1:0.4.5-1
Description: Thai fonts in TrueType format for D-I use

Package: input-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: input-modules
Depends: kernel-image-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di
Description: Input devices support

Package: acpi-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: acpi-modules
Depends: kernel-image-2.6.17-2-486-di
Description: ACPI support modules

Package: scsi-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: scsi-modules
Depends: kernel-image-2.6.17-2-486-di,
scsi-core-modules-2.6.17-2-486-di, parport-modules-2.6.17-2-486-di,
cdrom-core-modules-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di
Description: SCSI drivers

Package: preseed-common
Status: install ok unpacked
Version: 1.20
Depends: cdebconf-udeb, di-utils (>= 1.14)
Description: common files for preseeding

Package: mouse-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: mouse-modules
Depends: kernel-image-2.6.17-2-486-di, input-modules-2.6.17-2-486-di,
usb-modules-2.6.17-2-486-di
Description: Mouse support

Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone

Package: localechooser
Status: install ok installed
Version: 1.28
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10

Package: cdrom-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: cdrom-modules
Depends: ide-modules-2.6.17-2-486-di,
cdrom-core-modules-2.6.17-2-486-di, kernel-image-2.6.17-2-486-di
Description: Esoteric CDROM drivers

Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6.ds1-7
Description: GNU C Library: NSS helper for DNS - udeb

Package: cdrom-checker
Status: install ok unpacked
Version: 1.09
Depends: cdrom-detect, cdebconf-udeb (>= 0.31)
Description: Verify the cd contents
Installer-Menu-Item: 940

Package: lowmemcheck
Status: install ok unpacked
Version: 1.21
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode

Package: cdrom-retriever
Status: install ok installed
Version: 1.12
Provides: retriever
Depends: cdebconf-udeb, cdrom-detect
Description: Fetch modules from a CDROM

Package: main-menu
Status: install ok unpacked
Version: 1.15
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb,
libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: Debian installer main menu

Package: ttf-khmeros-udeb
Status: install ok unpacked
Version: 3.10-3
Provides: ttf-installer
Description: Debian-Installer font for the Khmer language of Cambodia

Package: di-utils-shell
Status: install ok unpacked
Version: 1.38
Depends: cdebconf-udeb, di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950

Package: usb-serial-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: usb-serial-modules
Depends: kernel-image-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di
Description: USB serial drivers

Package: ttf-dejavu-udeb
Status: install ok unpacked
Version: 2.10-1
Description: Vera font family derivate with additional characters

Package: di-utils
Status: install ok installed
Version: 1.38
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45),
cdebconf-udeb
Description: Miscellaneous utilities for the debian installer

Package: usb-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: usb-modules
Depends: kernel-image-2.6.17-2-486-di
Description: USB support

Package: pcmcia-storage-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: pcmcia-storage-modules
Depends: kernel-image-2.6.17-2-486-di, ide-core-modules-2.6.17-2-486-di,
cdrom-core-modules-2.6.17-2-486-di, pcmcia-modules-2.6.17-2-486-di
Description: PCMCIA storage drivers

Package: scsi-core-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: scsi-core-modules
Depends: kernel-image-2.6.17-2-486-di
Description: Core SCSI subsystem

Package: ttf-cjk-compact-udeb
Status: install ok unpacked
Version: 1.7
Description: Shrinked CJK TrueType fonts for GUI d-i.

Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.108
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.6-6), libnewt0.52
Description: Newt frontend for Debian Configuration Management System

Package: ttf-freefont-udeb
Status: install ok unpacked
Version: 20060501cvs-9
Provides: ttf-installer
Description: Freefont Sans fonts for the graphical installer

Package: ttf-dzongkha-udeb
Status: install ok unpacked
Version: 0.2-3
Provides: ttf-installer
Description: TrueType fonts for Dzongkha language

Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.2.2-3
Depends: libc6 (>= 2.3.6-6)
Description: tools for managing Linux kernel modules

Package: rootskel
Status: install ok installed
Version: 1.41
Depends: di-utils (>= 1.24), cdebconf-udeb
Description: Skeleton root filesystem used by debian-installer

Package: libgtk-directfb-2.0-0-udeb
Status: install ok unpacked
Version: 2.8.20-3
Depends: libatk1.0-udeb (>= 1.12.2), libc6 (>= 2.3.6-6),
libcairo-directfb2-udeb (>= 1.2.4), libdirectfb-0.9-25-udeb,
libglib2.0-udeb (>= 2.12.0), libpango1.0-udeb (>= 1.14.5),
libpng12-0-udeb (>= 1.2.8rel)
Description: The GTK+ graphical user interface library - minimal runtime

Package: firmware-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: firmware-modules
Depends: kernel-image-2.6.17-2-486-di
Description: Firmware request modules

Package: udev-udeb
Status: install ok unpacked
Version: 0.100-2.1
Depends: libc6 (>= 2.3.6-6)
Description: /dev/ and hotplug management daemon

Package: libpng12-0-udeb
Status: install ok unpacked
Version: 1.2.8rel-7
Depends: libc6 (>= 2.3.6-6), zlib1g-udeb (>= 1:1.2.1)
Description: PNG library - minimal runtime library

Package: libnss-files-udeb
Status: install ok unpacked
Version: 2.3.6.ds1-7
Description: GNU C Library: NSS helper for files - udeb

Package: fb-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: fb-modules
Depends: kernel-image-2.6.17-2-486-di
Description: Frame buffer support

Package: brltty-udeb
Status: install ok unpacked
Version: 3.7.2-4
Depends: libc6 (>= 2.3.6-6)
Description: Access software for a blind person using a soft braille
terminal

Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-4
Depends: libc6 (>= 2.3.6-6)
Description: Free Implementation of the Unicode BiDi algorithm

Package: scsi-common-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: scsi-common-modules
Depends: kernel-image-2.6.17-2-486-di,
scsi-core-modules-2.6.17-2-486-di, cdrom-core-modules-2.6.17-2-486-di
Description: Very common SCSI drivers

Package: libcairo-directfb2-udeb
Status: install ok unpacked
Version: 1.2.4-4
Depends: fontconfig-udeb (>= 2.4.0), libc6 (>= 2.3.6-6),
libdirectfb-0.9-25-udeb, libfreetype6-udeb (>= 2.2), libpng12-0-udeb (>=
1.2.8rel), zlib1g-udeb (>= 1:1.2.1)
Description: The Cairo 2D vector graphics library DirectFB build

Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.6-6)
Description: text-wrapping library with i18n - runtime udeb

Package: gtk2-engines-udeb
Status: install ok unpacked
Version: 1:2.8.1-3
Depends: libatk1.0-udeb (>= 1.12.2), libc6 (>= 2.3.6-6),
libcairo-directfb2-udeb (>= 1.2.4), libdirectfb-0.9-25-udeb,
libglib2.0-udeb (>= 2.12.0), libgtk-directfb-2.0-0-udeb (>= 2.8.0),
libpango1.0-udeb (>= 1.14.5)
Description: theme engines for GTK+ 2.x in the Debian installer

Package: pcmcia-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: pcmcia-modules
Depends: kernel-image-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di
Description: Common PCMCIA drivers

Package: auto-install
Status: install ok unpacked
Version: 0.02
Depends: netcfg, preseed-common (>= 1.18)
Description: Support for automatic installs
Installer-Menu-Item: 19

Package: usb-discover
Status: install ok unpacked
Version: 1.06
Depends: cdebconf-udeb
Description: Discover USB and load kernel modules

Package: serial-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: serial-modules
Depends: kernel-image-2.6.17-2-486-di, pcmcia-modules-2.6.17-2-486-di
Description: Serial drivers

Package: ide-core-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: ide-core-modules
Depends: kernel-image-2.6.17-2-486-di
Description: IDE support

Package: rescue-check
Status: install ok unpacked
Version: 1.7
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested

Package: nano-udeb
Status: install ok unpacked
Version: 1.9.99pre2-1
Provides: editor
Depends: libc6 (>= 2.3.6-6), libslang2-udeb (>= 2.0.6-3)
Description: free Pico clone with some new features - tiny build

Package: rootskel-gtk
Status: install ok unpacked
Version: 1.00
Depends: cdebconf-udeb, rootskel, mouse-modules, gtk2-engines-udeb
Description: Additions for graphical installs to skeleton root
filesystem (debian-installer)

Package: cdebconf-udeb
Status: install ok installed
Version: 0.108
Provides: debconf-2.0
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45),
libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)

Package: ai-choosers
Status: install ok unpacked
Version: 0.02
Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23)
Description: Delayed configuration of locale and keyboard for auto-install
Installer-Menu-Item: 22

Package: floppy-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: floppy-modules
Depends: kernel-image-2.6.17-2-486-di
Description: Floppy driver

Package: libpango1.0-udeb
Status: install ok unpacked
Version: 1.14.7-1
Depends: fontconfig-udeb (>= 2.4.0), libc6 (>= 2.3.6-6),
libcairo-directfb2-udeb (>= 1.2.4), libfreetype6-udeb (>= 2.2),
libglib2.0-udeb (>= 2.12.0), zlib1g-udeb (>= 1:1.2.1)
Description: Layout and rendering of internationalized text

Package: libiw28-udeb
Status: install ok installed
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions

Package: parport-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: parport-modules
Depends: kernel-image-2.6.17-2-486-di
Description: Parallel port support

Package: load-cdrom
Status: install ok installed
Version: 1.12
Depends: cdebconf-udeb, cdrom-retriever, anna (>= 1.07)
Description: Load installer components from CD
Installer-Menu-Item: 16

Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.108
Depends: cdebconf-udeb, libc6 (>= 2.3.6-6)
Description: Plain text frontend for Debian Configuration Management System

Package: firewire-core-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.17-2-486-di, kernel-image-2.6.17-2-486-di
Description: Core FireWire drivers

Package: libfreetype6-udeb
Status: install ok unpacked
Version: 2.2.1-5
Depends: libc6 (>= 2.3.6-6), zlib1g-udeb (>= 1:1.2.1)
Description: FreeType 2 font engine for the debian-installer

Package: iso-3166-udeb
Status: install ok installed
Version: 0.57-1
Description: provides iso_3166.tab file

Package: ttf-farsiweb-udeb
Status: install ok unpacked
Version: 0.4-4
Provides: ttf-installer
Description: Farsiweb TrueType fonts for the graphical installer

Package: floppy-retriever
Status: install ok unpacked
Version: 1.11
Provides: retriever
Depends: cdebconf-udeb, mountfloppy
Description: Fetches modules from a floppy

Package: ethdetect
Status: install ok installed
Version: 1.43
Provides: ethernet-card-detection
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect,
di-utils (>= 1.13)
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 18

Package: libexpat1-udeb
Status: install ok unpacked
Version: 1.95.8-3.3
Provides: libexpat1
Depends: libc6 (>= 2.3.6-6)
Description: XML parsing C library - runtime library

Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-3
Depends: libc6 (>= 2.3.6-6)
Description: Tiny utilities for the debian-installer

Package: initrd-preseed
Status: install ok unpacked
Version: 1.20
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd

Package: archdetect
Status: install ok installed
Version: 1.43
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45)
Description: Hardware architecture detector

Package: cdrom-core-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: cdrom-core-modules
Depends: kernel-image-2.6.17-2-486-di,
scsi-core-modules-2.6.17-2-486-di, ide-modules-2.6.17-2-486-di
Description: CDROM support

Package: ttf-bpg-georgian-fonts-udeb
Status: install ok unpacked
Version: 0.3
Provides: ttf-installer
Description: BPG Georgian fonts for the graphical installer

Package: save-logs
Status: install ok unpacked
Version: 2.22
Depends: cdebconf-udeb
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940

Package: di-utils-reboot
Status: install ok unpacked
Version: 1.38
Depends: cdebconf-udeb
Description: Reboot
Installer-Menu-Item: 995

Package: anna
Status: install ok installed
Version: 1.25
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb,
libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do

Package: libsysfs2-udeb
Status: install ok unpacked
Version: 2.0.0-7
Provides: libsysfs2
Depends: libc6 (>= 2.3.6-6)
Description: interface library to sysfs

Package: pcmciautils-udeb
Status: install ok unpacked
Version: 014-2
Depends: udev-udeb, libc6 (>= 2.3.6-6), libsysfs2-udeb
Description: PCMCIA utilities for Linux 2.6

Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.4~pre4-1
Depends: libc6 (>= 2.3.6-6)
Description: Linux PCI Utilities (udeb)

Package: console-keymaps-at
Status: install ok installed
Version: 2:1.01-1
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards

Package: ttf-tamil-fonts-udeb
Status: install ok unpacked
Version: 1:0.4.7.1
Provides: ttf-installer
Description: Free TrueType fonts for the Tamil language

Package: usb-storage-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: usb-storage-modules
Depends: ide-core-modules-2.6.17-2-486-di,
scsi-core-modules-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di
Description: USB storage support

Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.38
Description: Terminfo entries needed by newt/slang in debian installer

Package: libdirectfb-0.9-25-udeb
Status: install ok unpacked
Version: 0.9.25.1-4
Provides: libdirectfb-0.9-25
Depends: libc6 (>= 2.3.6-6), libfreetype6-udeb (>= 2.2), libpng12-0-udeb
(>= 1.2.8rel), libsysfs2-udeb, zlib1g-udeb (>= 1:1.2.1)
Description: direct frame buffer graphics - shared libraries

Package: hw-detect
Status: install ok installed
Version: 1.43
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75),
di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it

Package: kbd-chooser
Status: install ok installed
Version: 1.31
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb,
libdebian-installer4-udeb (>= 0.45), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12

Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.45
Depends: libc6 (>= 2.3.6-6)
Description: Library of common debian-installer functions

Package: fontconfig-udeb
Status: install ok unpacked
Version: 2.4.1-2
Depends: libc6 (>= 2.3.6-6), libexpat1-udeb (>= 1.95.8),
libfreetype6-udeb (>= 2.2), zlib1g-udeb (>= 1:1.2.1)
Description: generic font configuration library - minimal runtime

Package: cdebconf-gtk-udeb
Status: install ok unpacked
Version: 0.108
Depends: cdebconf-udeb, libatk1.0-udeb (>= 1.12.2), libc6 (>= 2.3.6-6),
libcairo-directfb2-udeb (>= 1.2.4), libdirectfb-0.9-25-udeb,
libglib2.0-udeb (>= 2.12.0), libgtk-directfb-2.0-0-udeb (>= 2.8.0),
libpango1.0-udeb (>= 1.14.7), rootskel-gtk (>= 0.05)
Description: Gtk+ frontend for Debian Configuration Management System

Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale

Package: env-preseed
Status: install ok unpacked
Version: 1.20
Description: debconf preseeding via environment variables

Package: mountfloppy
Status: install ok unpacked
Version: 0.8
Depends: cdebconf-udeb, di-utils (>= 1.15)
Description: Mounts a floppy

Package: cdebconf-priority
Status: install ok unpacked
Version: 0.108
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930

Package: fat-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: fat-modules
Depends: kernel-image-2.6.17-2-486-di
Description: FAT filesystem support

Package: netcfg
Status: install ok installed
Version: 1.31
Provides: configured-network
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb,
libdebian-installer4-udeb (>= 0.45), libiw28-udeb (>= 28),
dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Description: Configure the network
Installer-Menu-Item: 18

Package: file-preseed
Status: install ok unpacked
Version: 1.20
Depends: cdebconf-udeb, di-utils, preseed-common
Description: load debconf preseed file
Installer-Menu-Item: 14

Package: zlib1g-udeb
Status: install ok unpacked
Version: 1:1.2.3-13
Provides: zlib1g
Description: compression library - runtime for Debian installer

Package: libglib2.0-udeb
Status: install ok unpacked
Version: 2.12.4-1
Depends: libc6 (>= 2.3.6-6)
Description: The GLib library of C routines

Package: sata-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: sata-modules
Depends: kernel-image-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di
Description: SATA drivers

Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.108
Depends: libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)

Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.5
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal

Package: ide-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: ide-modules
Depends: kernel-image-2.6.17-2-486-di, ide-core-modules-2.6.17-2-486-di
Description: IDE drivers

Package: libatk1.0-udeb
Status: install ok unpacked
Version: 1.12.3-1
Depends: libc6 (>= 2.3.6-6), libglib2.0-udeb (>= 2.12.0)
Description: The ATK accessibility toolkit

Package: cdrom-detect
Status: install ok installed
Version: 1.18
Depends: cdebconf-udeb, hw-detect, di-utils (>= 1.33)
Description: Detect CDROM devices and mount the CD
Installer-Menu-Item: 13

Package: kernel-image-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer

Package: debian-installer
Status: install ok installed
Version: cdrom-gtk-20061026
Description: debian installation image

Package: apt-cdrom-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 44
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: cdrom-detect, cdebconf-udeb
Provides: apt-mirror-setup
Description: set up a CD in sources.list

Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 152
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: choose-mirror-bin, cdebconf-udeb
Description: set up a mirror in sources.list

Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: apt-mirror-setup, base-installer (>= 1.49), cdebconf-udeb
Description: Configure apt
Installer-Menu-Item: 70

Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 596
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.68
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb,
libdebian-installer4-udeb (>= 0.45), mounted-partitions,
debootstrap-udeb (>= 0.3.1), created-fstab, archdetect,
di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19)
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65

Package: choose-mirror-bin
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 272
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.08
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb,
libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: Choose mirror to install from (program)

Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 72
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.12
Depends: cdebconf-udeb, os-prober, tzsetup-udeb
Description: set up clock
Installer-Menu-Item: 62

Package: crc-modules-2.6.17-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: crc-modules
Description: CRC modules
 This package contains CRC support modules.

Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 168
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3
Depends: libc6 (>= 2.3.5-1), mounted-partitions
Description: Bootstrap the Debian system
 debootstrap is used to create a Debian base system from scratch,
 without requiring the availability of dpkg or apt. It does this by
 downloading .deb files from a mirror site, and carefully unpacking them
 into a directory which can eventually be chrooted into.
 .
 debootstrap-udeb is a minimal package used by debian-installer.

Package: dhcp-client-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 100
Maintainer: Eloy A. Paris <peloy@debian.org>
Version: 2.0pl5-19.4
Depends: libc6 (>= 2.3.5-1)
Description: DHCP Client for debian-installer
 dhcp-client-udeb is a minimal dhcp package used by the debian-installer.

Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.38
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45)
Description: mapdevfs utility for the debian installer

Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 60
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.43
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35

Package: dmidecode-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 60
Maintainer: Petter Reinholdtsen <pere@debian.org>
Version: 2.8-2
Depends: libc6 (>= 2.3.5-1)
Description: Dump Desktop Management Interface data (udeb)

Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 356
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.10.02+dfsg-2
Depends: libblkid1-udeb, libc6 (>= 2.3.6-6)
Description: stripped-down versions of e2fsprogs, for debian-installer
 This package is an e2fsprogs package built for a reduced size, so that
 it can help to save space in debian-installer.
 .
 Don't attempt to install this package, it has no support for a couple of
 features you surely want.  Anyway it should refuse to install.

Package: elilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 88
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.6
Depends: cdebconf-udeb, base-installer, partconf-find-partitions (>=
1.08), di-utils-mapdevfs, fat-modules, firmware-modules, dmidecode-udeb
(>= 2.7)
Provides: bootable-system
Description: Install elilo on a hard disk
 This udeb will install elilo on the hard disk.
Installer-Menu-Item: 76

Package: ext3-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 236
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: ext3-modules
Description: EXT3 filesystem support
 This package contains the EXT3 filesystem module for the Linux kernel.

Package: fdisk-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 136
Maintainer: LaMont Jones <lamont@debian.org>
Version: 2.12r-12
Depends: libc6 (>= 2.3.6-6)
Description: Partition a hard drive (manual)
 fdisk package

Package: finish-install
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.5
Depends: cdebconf-udeb, archdetect, base-installer, created-fstab,
bootable-system
Provides: prebaseconfig
Description: Finish the installation and reboot
Installer-Menu-Item: 78

Package: grub-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 356
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.19
Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>=
1.15), di-utils-mapdevfs, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install GRUB on a hard disk
Installer-Menu-Item: 73

Package: jfs-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 212
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: jfs-modules
Description: JFS filesystem support
 This package contains the JFS filesystem module for the Linux kernel.

Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 984
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of jfsutils, for debian-installer
 This package is a jfsutils package built for reduced size, so that it
 can help to save space in debian-installer.
 .
 Don't attempt to install this package, it has no support for a couple of
 features you surely want.  Anyway, it should fail to install.

Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 40
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.10.02+dfsg-2
Depends: libc6 (>= 2.3.6-6)
Provides: libblkid1
Description: block device id library
 The blkid library which allows system programs like fsck and
 mount to quickly and easily find block devices by filesystem UUID and
 LABEL.  This allows system administrators to avoid specifiying
 filesystems by hard-coded device names, but via a logical naming
 system instead.
 .
 This is a minimal package for debian-installer.

Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 1584
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6.ds1-7
Provides: libc6, libc-udeb, glibc-2.3.6.ds1-1, glibc-2.3.6-2
Description: GNU C Library: Shared libraries - udeb
 Contains the standard libraries that are used by nearly all programs on
 the system. This package includes shared versions of the standard C library
 and the standard math library, as well as many others.
 .
 This package contains a minimal set of libraries needed for the Debian
 installer.  Do not install it on a normal system.

Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 52
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.08-1
Depends: libc6 (>= 2.3.6-6)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
 This is a udeb, or a microdeb, for the debian-installer.
 .
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but EVMS, software
 raid, and other drivers that create "virtual" block devices.

Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 328
Maintainer: Parted Maintainer Team
<parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-2.1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
 GNU Parted is a program that allows you to create, destroy,
 resize, move and copy hard disk partitions. This is useful
 for creating space for new operating systems, reorganising
 disk usage, and copying data to new hard disks. This package
 contains the Parted binary and manual page.
 .
 This package contains libparted, the required shared library
 used by Parted. This is a cut-down package with no normal
 documentation intended to be used in debian-installer.
 .
 Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
 PC98 disklabels/partition tables, as well as a 'loop' (raw
 disk) type which allows use on RAID/LVM. Filesystems which
 are currently fully supported are ext2, ext3, fat (FAT16
 and FAT32), ReiserFS (with libreiserfs) and linux-swap.
 Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
 UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
 but cannot create, resize or check these filesystems yet.
 .
 Note that ReiserFS support is only enabled if you install
 the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
 removed from sarge, ReiserFS support is not compiled in the
 default package.
 .
 The nature of this software means that any bugs could cause
 massive data loss. While there are no known bugs at the moment,
 they could exist, so please back up all important files before
 running it, and do so at your own risk.

Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.10.02+dfsg-2
Depends: libc6 (>= 2.3.6-6)
Provides: libuuid1
Description: universally unique id library
 libuuid generates and parses 128-bit universally unique id's (UUID's),
 using a standard which is blessed by both Microsoft and DCE, and is
 being proposed as an internet standard.  See the internet-draft:
 .
                draft-leach-uuids-guids-01.txt
 .
 for more information.
 .
 This is a minimal package for debian-installer.

Package: lilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.18
Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15),
di-utils-mapdevfs, fdisk-udeb, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install LILO on a hard disk
Installer-Menu-Item: 75

Package: loop-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: loop-modules
Description: Loopback filesystem support
 This package contains loopback filesystem support for the Linux kernel.

Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 428
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.06-3
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
 This is a udeb, or a microdeb, for the debian-installer.
 .
 This is LVM2, the rewrite of The Linux Logical Volume Manager.  LVM
 supports enterprise level volume management of disk and disk subsystems
 by grouping arbitrary disks into volume groups. The total capacity of
 volume groups can be allocated to logical volumes, which are accessed as
 regular block devices.

Package: md-modules-2.6.17-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 348
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: md-modules
Description: RAID and LVM support
 This package contains RAID and LVM modules for the Linux kernel.

Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 176
Maintainer: Debian mdadm maintainers
<pkg-mdadm-devel@lists.alioth.debian.org>
Version: 2.5.4-1
Depends: libc6 (>= 2.3.6-6)
Description: tool to administer Linux MD arrays (software RAID)
 mdadm is a program that can be used to create, manage, and monitor MD
 arrays (e.g. software RAID, multipath devices).
 .
 mdadm-udeb is a minimal package used by the debian-installer.

Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 384
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.19
Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb (>=
2.5.2), partconf-find-partitions
Description: Configure MD devices
 Use this module to configure the MD devices.

Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 144
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-4
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: User-level tools for ReiserFS filesystems
 This installer module contains the utility to create ReiserFS filesystems.
 .
  Homepage: http://www.namesys.com/

Package: network-preseed
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.20
Depends: cdebconf-udeb, configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21

Package: nic-extra-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 2872
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di,
nic-shared-modules-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di,
crc-modules-2.6.17-2-486-di
Provides: nic-extra-modules
Description: Rare NIC drivers
 This package contains rare NIC drivers for the Linux kernel.

Package: nic-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 444
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di,
nic-shared-modules-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di,
firewire-core-modules-2.6.17-2-486-di
Provides: nic-modules
Description: Common NIC drivers
 This package contains common NIC drivers for the Linux kernel.

Package: nic-pcmcia-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 556
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di,
nic-shared-modules-2.6.17-2-486-di, nic-extra-modules-2.6.17-2-486-di,
pcmcia-modules-2.6.17-2-486-di
Provides: nic-pcmcia-modules
Description: Common PCMCIA NIC drivers
 This package contains common PCMCIA NIC drivers for the Linux kernel.

Package: nic-shared-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: nic-shared-modules
Description: Shared NIC drivers
 This package contains NIC drivers needed by combinations of nic-modules,
 nic-extra-modules, and nic-pcmcia-modules.

Package: nic-usb-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 188
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di,
nic-shared-modules-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di,
firmware-modules-2.6.17-2-486-di
Provides: nic-usb-modules
Description: USB NIC drivers
 This package contains USB network adapter drivers for the Linux kernel.

Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 144
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.13
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
 This package will skip installing a boot-loader
Installer-Menu-Item: 77

Package: ntfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 244
Maintainer: David Martínez Moreno <ender@debian.org>
Version: 1.13.1-4
Depends: libc6 (>= 2.3.6-6)
Provides: ntfstools-udeb
Description: Tools for doing neat things in NTFS partitions from Linux -
udeb
 Currently this udeb contains only ntfsresize.

Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 68
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
 This package is to be used by boot loader installers to detect other OSes
 available on a system, in a generic format, which it can then adapt to its
 own configuration format.

Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.19
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45),
libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for finding partitions
 Helper program for finding partitions and detecting their size and
 existing file system.

Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 60
Maintainer: Parted Maintainer Team
<parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-2.1
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1)
Provides: parted
Description: The GNU Parted disk partition resizing program
 GNU Parted is a program that allows you to create, destroy,
 resize, move and copy hard disk partitions. This is useful
 for creating space for new operating systems, reorganising
 disk usage, and copying data to new hard disks. This package
 contains the Parted binary and manual page.
 .
 This package is similar to the "big" parted package, but has
 less cosmetical features resulting in smaller binary. Intended
 to be used in debian-installer.
 .
 .
 The nature of this software means that any bugs could cause
 massive data loss. While there are no known bugs at the moment,
 they could exist, so please back up all important files before
 running it, and do so at your own risk.

Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 356
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 60
Depends: cdebconf-udeb, di-utils, partman-base,
partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)

Package: partman-auto-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 3
Depends: cdebconf-udeb, partman-auto (>= 55), partman-auto-lvm (>= 14),
partman-crypto (>= 13), partman-base (>= 87)
Description: Automatically partition storage devices using crypto and LVM

Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 148
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 18
Depends: cdebconf-udeb, partman-base (>= 73), partman-auto (>= 59),
partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM

Package: partman-auto-raid
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2
Depends: cdebconf-udeb, partman-base, partman-basicfilesystems,
partman-ext3, partman-auto (>= 58), partman-md
Description: Allow preseeded RAID installs

Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 848
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 97
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1),
cdebconf-udeb, partman-partitioning, partman-target, archdetect,
harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives,
created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42

Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 576
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 49
Depends: cdebconf-udeb, e2fsprogs-udeb, ext2-modules, fat-modules,
di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32

Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 124
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 32
Depends: cdebconf-udeb
Provides: partman-method
Description: Basic partition usage methods for partman
 This package provides partman with two methods to use partitions.
 The first is to format the partition.  The second is to keep and use
 the existing data in the partition as it is.

Package: partman-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 856
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 17
Depends: partman-base (>= 87), libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Add to partman support for block device encryption

Package: partman-efi
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 124
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 10
Depends: partman-base
Description: Add to partman support for EFI boot partitions

Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 43
Depends: cdebconf-udeb, e2fsprogs-udeb, ext3-modules,
partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3

Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 260
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 18
Depends: cdebconf-udeb, jfsutils-udeb, jfs-modules,
partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman

Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 680
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 47
Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14),
md-modules, lvm2-udeb, parted-udeb
Description: Adds support for LVM to partman

Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 156
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 30
Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87)
Description: Add to partman support for MD

Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 364
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 44
Depends: ntfsprogs-udeb, cdebconf-udeb
Description: Partitioning operations for partman
 This udeb provides partman with editing operations for creation
 of new partitions, deletion of partitions and initialisation of the
 partition table.

Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 228
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 32
Depends: cdebconf-udeb, mkreiserfs-udeb, reiserfs-modules,
partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs

Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 304
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 46
Depends: cdebconf-udeb, partman-basicfilesystems, partman-basicmethods,
di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
 This udeb allows the user to choose how partitions should be used.

Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 30
Depends: cdebconf-udeb, xfsprogs-udeb, xfs-modules,
partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs

Package: pcmcia-cs-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 232
Maintainer: Per Olofsson <pelle@debian.org>
Version: 3.2.8-9
Description: PCMCIA Card Services for Linux (udeb)

Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 28
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.10
Depends: cdebconf-udeb, apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70

Package: reiserfs-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 268
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: reiserfs-modules
Description: Reiser filesystem support
 This package contains the Reiser filesystem module for the Linux kernel.

Package: scsi-extra-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1316
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: scsi-modules-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
 This package contains uncommon SCSI drivers for the Linux kernel.
 This includes SCSI RAID drivers, and some of the less common SCSI
 controllers.

Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 292
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.12
Depends: cdebconf-udeb, localechooser
Description: choose timezone
Installer-Menu-Item: 62

Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 336
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.7
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63

Package: wireless-tools-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 28
Maintainer: Guus Sliepen <guus@debian.org>
Version: 28-1
Depends: libc6 (>= 2.3.5-1), libiw28-udeb (>= 28)
Description: Tools for manipulating Linux Wireless Extensions
 This package contains the Wireless tools, used to manipulate the Linux
 Wireless Extensions. The Wireless Extension is an interface allowing you to
 set Wireless LAN specific parameters and get the specific stats.
 .
 This is a udeb of the wireless tools.

Package: xfs-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 568
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: xfs-modules
Description: XFS filesystem support
 This package contains the XFS filesystem module for the Linux kernel.

Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 232
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.8.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of xfsprogs, for debian-installer
 This package is an xfsprogs package built for reduced size, so that it
 can help to save space in debian-installer.
 .
 Don't attempt to install this package, it has no support for a couple of
 features you surely want.  Anyway, it should fail to install.

Package: ntfs-modules-2.6.17-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 248
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: ntfs-modules
Description: NTFS filesystem support
 This package contains the NTFS file system module for the Linux kernel.

Package: qnx4-modules-2.6.17-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: qnx4-modules
Description: QNX4 filesystem support
 This package contains the QNX4 filesystem module for the Linux kernel.


-- System Information:
Debian Release: 4.0
  APT prefers testing
  APT policy: (650, 'testing'), (600, 'unstable')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-3-686
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)

installation-report depends on no packages.

Versions of packages installation-report recommends:
ii  pciutils                  1:2.2.4~pre4-1 Linux PCI Utilities
ii  reportbug                 3.31           reports bugs in the Debian
distrib

-- no debconf information

-- 


-- 

Jonathan Kaye
Carrer de Fontajau 32-34, 1r 3a
17007 GIRONA
Catalunya

Tel: +34 972 22 82 50
Sip Phone: 611049@fwd.pulver.com





--- End Message ---
--- Begin Message ---
severity 407030 normal
thanks

Severity "critical" is absolutely not justified for this report. 
Networking issues can always be repaired.

On Monday 15 January 2007 18:40, Jonathan Kaye wrote:
> Comments/Problems:
> I selected the eth0 card (sorry I don't recall what it was called,
> something like "fast ethernet card") but when I got to selecting
> mirrors for apt-get I realised
> there was no network connection. I tried this a few times (I was using
> "expertgui") and then went back and selected eth1.

You probably selected a FireWire ethernet port. Recognition of FireWire 
has been fixed very recently in daily built images.

> The installation proceeded normally but when I finally got my system up
> and running I couldn't connect to the network. 

This is almost certainly fixed as well. There were some problems in udev 
that could cause this, but these have recently been fixed.

As both issues you reported have been solved, I'm closing the report.
Thank you for submitting it.

Cheers,
FJP

--- End Message ---

Reply to: