[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#405603: installation-guide-i386: [netboot/tftpd] correct pxelinux.0 location

On Thu, Jan 04, 2007 at 11:32:51PM +0100, Luca Capello wrote:

> recently I installed etch via the netboot method [1], but I forgot to
> mention that the sarge [2] and etch [3] installation guides contain a
> wrong entry for the pxelinux.0 location.
> Per the guide, dhcpd.conf should contain a line like
>   filename "/tftpboot/pxelinux.0";
> Using that line, I got "file not found", thus I modified the line to
>   filename "pxelinux.0";
> Am I correct or did I miss something?

The correct filename depends on how the tftpd is configured.
The manual assumes that it does not run chrooted so that
the full path must be supplied. It looks like your tftpd
runs chrooted, i.e. it only "sees" the files below /tftpboot
and therefore requires only the filename without the path

#include <standard_disclaimer>
Nach Paragraph 28 Abs. 3 Bundesdatenschutzgesetz widerspreche ich der Nutzung
oder Uebermittlung meiner Daten fuer Werbezwecke oder fuer die Markt- oder

Reply to: