[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#373145: marked as done (Installation on software RAID fails to boot)

Your message dated Wed, 22 Nov 2006 06:37:58 +0100
with message-id <20061122053758.GF8981@kheops.homeunix.org>
and subject line Bug#373145: This seems to be resolved
has caused the attached Bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message --- 
Package: installation-reports

Boot method: Daily i386 netinst CD
Image version: downloaded 2006 June 11
Date: 2006 June 12

Machine: Asus P2L-B
Processor: Celeron 500MHz
Memory: 384MB
Partitions:

hda1, ~128MB, swap
hda2, ~64MB, ext3, /boot
hda3, extended partition
hda5, ~2GB, software RAID

hdb looks identical except that hdb2 isn't mounted.

hda5 + hdb5 = md0, RAID 0, root filesystem.

I've read that it's now possible to boot from RAID, and I can try that later.

The installer was a pleasure to use. It really made the RAID setup
process easy. Good job!

Output of lspci and lspci -n: Let me know if you need this.

Base System Installation Checklist:

All OK except for booting from hard disk.

Comments/Problems:

I'll attach a boot log. Please let me know if I've just done something
wrong. Thanks.

-- graham

Linux version 2.6.15-1-486 (Debian 2.6.15-8) (waldi@debian.org) (gcc version 4.0.3 20060212 (prerelease) (Debian 4.0.2-9)) #2 Mon Mar 6 15:19:16 UTC 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000017ffd000 (usable)
 BIOS-e820: 0000000017ffd000 - 0000000017fff000 (ACPI data)
 BIOS-e820: 0000000017fff000 - 0000000018000000 (ACPI NVS)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
383MB LOWMEM available.
DMI 2.0 present.
ACPI: PM-Timer IO Port: 0xe408
Allocating PCI resources starting at 20000000 (gap: 18000000:e7ff0000)
Built 1 zonelists
Kernel command line: root=/dev/md0 ro console=tty0 console=ttyS1,38400n8
Local APIC disabled by BIOS -- you can enable it with "lapic"
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 501.181 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 381808k/393204k available (1516k kernel code, 10788k reserved, 574k data, 228k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1002.86 BogoMIPS (lpj=501432)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
mtrr: v2.0 (20020519)
CPU: Intel Celeron (Mendocino) stepping 05
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0a00)
checking if image is initramfs... it is
Freeing initrd memory: 4705k freed
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf06d0, last bus=1
PCI: Using configuration type 1
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI quirk: region e400-e43f claimed by PIIX4 ACPI
PCI quirk: region e800-e80f claimed by PIIX4 SMB
PIIX4 devres B PIO at 0290-0297
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
pnp: 00:01: ioport range 0xe400-0xe43f could not be reserved
pnp: 00:01: ioport range 0xe800-0xe80f has been reserved
pnp: 00:01: ioport range 0x294-0x297 has been reserved
PCI: Bridge: 0000:00:01.0
  IO window: disabled.
  MEM window: d6000000-d7dfffff
  PREFETCH window: d7f00000-e3ffffff
Simple Boot Flag at 0x46 set to 0x1
audit: initializing netlink socket (disabled)
audit(1150152862.306:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
pnp: SB audio device quirk - increasing port range
isapnp: Card 'Creative SB16 PnP'
isapnp: 1 Plug & Play card detected total
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
EISA: Probing bus 0 at eisa.0
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 4, 65536 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI Shortcut mode
ACPI wakeup devices: 
PCI0 UAR1 UAR2 PS2M USB0 
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 228k freed
input: AT Translated Set 2 keyboard as /class/input/input0
Loading, please wait...
Begin: Loading essential drivers... ...
Done.
Begin: Running /scripts/init-premount ...
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:00:0b.0: 3Com PCI 3c905C Tornado at d881e000. Vers LK1.1.19
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:04.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio
USB Universal Host Controller Interface driver v2.3
hda: IBM-DARA-206000, ATA DISK drive
hdb: IBM-DARA-206000, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: HL-DT-ST GCE-8526B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
ACPI: PCI Interrupt 0000:00:04.2[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
uhci_hcd 0000:00:04.2: UHCI Host Controller
uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:04.2: irq 9, io base 0x0000d400
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hda: max request size: 128KiB
hda: 11733120 sectors (6007 MB) w/418KiB Cache, CHS=12416/15/63, UDMA(33)
hda: cache flushes not supported
 hda: hda1 hda2 hda3 < hda5 >
hdb: max request size: 128KiB
hdb: 11733120 sectors (6007 MB) w/418KiB Cache, CHS=12416/15/63, UDMA(33)
hdb: cache flushes not supported
 hdb: hdb1 hdb2 hdb3 < hdb5 >
hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Done.
Begin: Mounting root file system... ...
Begin: Running /scripts/local-top ...
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
md: raid0 personality registered as nr 2
mknod: hda: File exists
mknod: hda1: File exists
mknod: hda2: File exists
mknod: hda3: File exists
mknod: hda5: File exists
mknod: hdb: File exists
mknod: hdb1: File exists
mknod: hdb2: File exists
mknod: hdb3: File exists
mknod: hdb5: File exists
md: md0 stopped.
md: bind<hdb>
md: bind<hda>
md0: setting max_sectors to 64, segment boundary to 16383
raid0: looking at hda
raid0:   comparing hda(5866496) with hda(5866496)
raid0:   END
raid0:   ==> UNIQUE
raid0: 1 zones
raid0: looking at hdb
raid0:   comparing hdb(5866496) with hda(5866496)
raid0:   EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 11732992 blocks.
raid0 : conf->hash_spacing is 11732992 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 4 bytes for hash.
mdadm: /dev/md0 has been started with 2 drives.
md: md1 stopped.
mdadm: cannot open device /dev/hda5: Device or resource busy
mdadm: /dev/hda5 has no superblock - assembly aborted
md: md1 stopped.
mdadm: cannot open device /dev/hda5: Device or resource busy
mdadm: /dev/hda5 has no superblock - assembly aborted
Done.
Begin: Running /scripts/local-premount ...
Attempting manual resume
Done.
Begin: Running /scripts/log-bottom ...
Done.
Done.
Begin: Running /scripts/init-bottom ...
EXT2-fs error (device md0): ext2_check_page: bad entry in directory #2: rec_len is smaller than minimal - offset=0, inode=0, rec_len=0, name_len=0
mount: Mounting /root/dev on /dev/.static/dev failed: No such file or directory
Done.
mount: Mounting /sys on /root/sys failed: No such file or directory
mount: Mounting /proc on /root/proc failed: No such file or directory
Target filesystem doesn't have /sbin/init


BusyBox v1.01 (Debian 1:1.01-4) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

/bin/sh: can't access tty; job control turned off
/ # 
/ #

--- End Message ---
--- Begin Message --- 
> I doubt that I can reproduce the conditions that originally resulted
> in this bug report.


Well, thanks for reporting and caring enough to followup. As you
suggest, I think that there's only one thing left to do: close the bug
report.

Attachment: signature.asc
Description: Digital signature


--- End Message ---
Reply to: