Bug#397901: installation-report: installation report
Package: installation-reports
Version: 2.23
Severity: normal
-- Package-specific info:
Boot method: CD
Image version: http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/i386/iso-cd/debian-testing-i386-netinst.iso 2006-11-09
Date: First leg of installation (until "please remove CD") on 2006-11-09,
everything else today (2006-11-10)
Machine: Dell desktop
Partitions:
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/sdb4 ext3 94061352 4074892 85208328 5% /
udev tmpfs 10240 68 10172 1% /dev
devshm tmpfs 518132 0 518132 0% /dev/shm
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [ ]
Detect network card: [ ]
Configure network: [ ]
Detect CD: [ ]
Load installer modules: [ ]
Detect hard drives: [ ]
Partition hard drives: [ ]
Install base system: [ ]
Clock/timezone setup: [ ]
User/password setup: [ ]
Install tasks: [ ]
Install boot loader: [ ]
Overall install: [ ]
Comments/Problems:
Okay, so I decided to try a current etch installer.
I have some remarks and a possible bug (although I seem to have circumvented
it by installing some software, I'm not sure).
(BTW, the last two points are most important)
- I was surprised to see crypto support in the partitioning phase. First I
thought Debian now supports encrypted partitions for the system in the
installer (encrypt partitions except /boot), but obviously I was wrong.
:-/
That would be a wishlist item for me, though.
- The installer finds two network interfaces, eth0 and eth1. eth1 is the
real one, I haven't looked at eth0 yet, so I'm not sure what that is. I
can't remember that any installer (Debian sarge, Fedora, Ubuntu, whatever)
showed me two interfaces in the past. Gobolinux's LiveCD does show two
interfaces, IIRC.
- Software selection: I suppose there's an "expert" boot switch or something
like that that allows me to actually select software on a
per-software-level, not just "Desktop" or something like that. I really
think you should at least ask the user whether he wants to select
software. Few users will never use apt or aptitude. Why not let them do
that at install time?
- Please take a look at Ubuntu's installer, I like the way they deduce the
correct keymap by asking the user stuff like "is there a e´ key without
the need to press Shift?".
- You install a bittorrent tracker by default? That's a joke, right?
- I'd like to be able to choose to install KDE and enable it as a default
session. Okay, this is more or less another variation of "please let the
user select software".
- Recent distributions (Fedora, Ubuntu, Debian...) all seem to not get my
screen setup right. I have a not-too-new Radeon and a Samsung SyncMaster
950p plus. That's a 19" screen. I definitely do not want a resolution of
2048x1536@60Hz, thank you very much.
- After installation (and a subsequent reboot) I didn't have a network
connection. eth1 didn't have an IP, probably there was no dhcp request.
I can't reproduce it now. I guess that aptitude update, aptitude upgrade
and quite a lot of newly installed packages made that problem vanish.
Yes, this report should have come before all that additional software...
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report.
Once you have filled out this report, mail it to submit@bugs.debian.org.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="3.1 (installer build 20061102)"
X_INSTALLATION_MEDIUM=cdrom
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux blackbox 2.6.17-2-486 #1 Wed Sep 13 15:56:30 UTC 2006 i686 unknown
lspci -nn: 00:00.0 Host bridge [0600]: Intel Corporation 82875P/E7210 Memory Controller Hub [8086:2578] (rev 02)
lspci -nn: 00:01.0 PCI bridge [0604]: Intel Corporation 82875P Processor to AGP Controller [8086:2579] (rev 02)
lspci -nn: 00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02)
lspci -nn: 00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02)
lspci -nn: 00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [8086:24d7] (rev 02)
lspci -nn: 00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [8086:24de] (rev 02)
lspci -nn: 00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02)
lspci -nn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2)
lspci -nn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02)
lspci -nn: 00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02)
lspci -nn: 00:1f.2 IDE interface [0101]: Intel Corporation 82801EB (ICH5) SATA Controller [8086:24d1] (rev 02)
lspci -nn: 00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller [8086:24d3] (rev 02)
lspci -nn: 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] [1002:4e48]
lspci -nn: 01:00.1 Display controller [0380]: ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] (Secondary) [1002:4e68]
lspci -nn: 02:00.0 Multimedia audio controller [0401]: Creative Labs SB Audigy [1102:0004] (rev 04)
lspci -nn: 02:00.2 FireWire (IEEE 1394) [0c00]: Creative Labs SB Audigy FireWire Port [1102:4001] (rev 04)
lspci -nn: 02:02.0 Multimedia video controller [0400]: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder [4444:0016] (rev 01)
lspci -nn: 02:08.0 Ethernet controller [0200]: Intel Corporation 82562EZ 10/100 Ethernet Controller [8086:1050] (rev 02)
lspci -vnn: 00:00.0 Host bridge [0600]: Intel Corporation 82875P/E7210 Memory Controller Hub [8086:2578] (rev 02)
lspci -vnn: Subsystem: Dell Unknown device [1028:0157]
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Memory at e0000000 (32-bit, prefetchable) [size=128M]
lspci -vnn: Capabilities: [e4] Vendor Specific Information
lspci -vnn: Capabilities: [a0] AGP version 3.0
lspci -vnn:
lspci -vnn: 00:01.0 PCI bridge [0604]: Intel Corporation 82875P Processor to AGP Controller [8086:2579] (rev 02)
lspci -vnn: Flags: bus master, 66MHz, fast devsel, latency 64
lspci -vnn: Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
lspci -vnn: I/O behind bridge: 0000d000-0000dfff
lspci -vnn: Memory behind bridge: fe900000-feafffff
lspci -vnn: Prefetchable memory behind bridge: e8000000-f7ffffff
lspci -vnn:
lspci -vnn: 00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02)
lspci -vnn: Subsystem: Dell Unknown device [1028:0157]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 193
lspci -vnn: I/O ports at ff80 [size=32]
lspci -vnn:
lspci -vnn: 00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02)
lspci -vnn: Subsystem: Dell Unknown device [1028:0157]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 201
lspci -vnn: I/O ports at ff60 [size=32]
lspci -vnn:
lspci -vnn: 00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [8086:24d7] (rev 02)
lspci -vnn: Subsystem: Dell Unknown device [1028:0157]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 177
lspci -vnn: I/O ports at ff40 [size=32]
lspci -vnn:
lspci -vnn: 00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [8086:24de] (rev 02)
lspci -vnn: Subsystem: Dell Unknown device [1028:0157]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 193
lspci -vnn: I/O ports at ff20 [size=32]
lspci -vnn:
lspci -vnn: 00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20)
lspci -vnn: Subsystem: Dell Unknown device [1028:0157]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 185
lspci -vnn: Memory at ffa80800 (32-bit, non-prefetchable) [size=1K]
lspci -vnn: Capabilities: [50] Power Management version 2
lspci -vnn: Capabilities: [58] Debug port
lspci -vnn:
lspci -vnn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
lspci -vnn: I/O behind bridge: 0000c000-0000cfff
lspci -vnn: Memory behind bridge: fe800000-fe8fffff
lspci -vnn: Prefetchable memory behind bridge: f8000000-fbffffff
lspci -vnn:
lspci -vnn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02)
lspci -vnn: Flags: bus master, medium devsel, latency 0
lspci -vnn:
lspci -vnn: 00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP])
lspci -vnn: Subsystem: Dell Unknown device [1028:0157]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 177
lspci -vnn: I/O ports at <ignored>
lspci -vnn: I/O ports at <ignored>
lspci -vnn: I/O ports at <ignored>
lspci -vnn: I/O ports at <ignored>
lspci -vnn: I/O ports at ffa0 [size=16]
lspci -vnn: Memory at febffc00 (32-bit, non-prefetchable) [size=1K]
lspci -vnn:
lspci -vnn: 00:1f.2 IDE interface [0101]: Intel Corporation 82801EB (ICH5) SATA Controller [8086:24d1] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
lspci -vnn: Subsystem: Dell Unknown device [1028:0157]
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 177
lspci -vnn: I/O ports at fe00 [size=8]
lspci -vnn: I/O ports at fe10 [size=4]
lspci -vnn: I/O ports at fe20 [size=8]
lspci -vnn: I/O ports at fe30 [size=4]
lspci -vnn: I/O ports at fea0 [size=16]
lspci -vnn:
lspci -vnn: 00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller [8086:24d3] (rev 02)
lspci -vnn: Subsystem: Dell Unknown device [1028:0157]
lspci -vnn: Flags: medium devsel, IRQ 3
lspci -vnn: I/O ports at efe0 [size=32]
lspci -vnn:
lspci -vnn: 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] [1002:4e48]
lspci -vnn: Subsystem: ATI Technologies Inc Unknown device [1002:1002]
lspci -vnn: Flags: stepping, 66MHz, medium devsel, IRQ 11
lspci -vnn: Memory at f0000000 (32-bit, prefetchable) [size=128M]
lspci -vnn: I/O ports at de00 [size=256]
lspci -vnn: Memory at fe9e0000 (32-bit, non-prefetchable) [size=64K]
lspci -vnn: Expansion ROM at fea00000 [disabled] [size=128K]
lspci -vnn: Capabilities: [58] AGP version 3.0
lspci -vnn: Capabilities: [50] Power Management version 2
lspci -vnn:
lspci -vnn: 01:00.1 Display controller [0380]: ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] (Secondary) [1002:4e68]
lspci -vnn: Subsystem: ATI Technologies Inc Unknown device [1002:1003]
lspci -vnn: Flags: bus master, stepping, 66MHz, medium devsel, latency 64
lspci -vnn: Memory at e8000000 (32-bit, prefetchable) [size=128M]
lspci -vnn: Memory at fe9f0000 (32-bit, non-prefetchable) [size=64K]
lspci -vnn: Capabilities: [50] Power Management version 2
lspci -vnn:
lspci -vnn: 02:00.0 Multimedia audio controller [0401]: Creative Labs SB Audigy [1102:0004] (rev 04)
lspci -vnn: Subsystem: Creative Labs Unknown device [1102:1003]
lspci -vnn: Flags: bus master, medium devsel, latency 64, IRQ 10
lspci -vnn: I/O ports at cf00 [size=64]
lspci -vnn: Capabilities: [dc] Power Management version 2
lspci -vnn:
lspci -vnn: 02:00.2 FireWire (IEEE 1394) [0c00]: Creative Labs SB Audigy FireWire Port [1102:4001] (rev 04) (prog-if 10)
lspci -vnn: Subsystem: Creative Labs Unknown device [1102:0010]
lspci -vnn: Flags: bus master, medium devsel, latency 64, IRQ 169
lspci -vnn: Memory at fe8fa800 (32-bit, non-prefetchable) [size=2K]
lspci -vnn: Memory at fe8fc000 (32-bit, non-prefetchable) [size=16K]
lspci -vnn: Capabilities: [44] Power Management version 2
lspci -vnn:
lspci -vnn: 02:02.0 Multimedia video controller [0400]: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder [4444:0016] (rev 01)
lspci -vnn: Subsystem: Hauppauge computer works Inc. Unknown device [0070:4009]
lspci -vnn: Flags: bus master, medium devsel, latency 64, IRQ 3
lspci -vnn: Memory at f8000000 (32-bit, prefetchable) [size=64M]
lspci -vnn: Capabilities: [44] Power Management version 2
lspci -vnn:
lspci -vnn: 02:08.0 Ethernet controller [0200]: Intel Corporation 82562EZ 10/100 Ethernet Controller [8086:1050] (rev 02)
lspci -vnn: Subsystem: Dell Unknown device [1028:0157]
lspci -vnn: Flags: bus master, medium devsel, latency 64, IRQ 209
lspci -vnn: Memory at fe8fb000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn: I/O ports at cf40 [size=64]
lspci -vnn: Capabilities: [dc] Power Management version 2
lspci -vnn:
lsmod: Module Size Used by
lsmod: qnx4 10484 0
lsmod: ntfs 184468 0
lsmod: twofish 43264 0
lsmod: serpent 19200 0
lsmod: blowfish 9344 0
lsmod: sha256 11008 0
lsmod: aes 28096 0
lsmod: dm_crypt 10760 0
lsmod: dm_mod 48696 1 dm_crypt
lsmod: xfs 481140 0
lsmod: reiserfs 210176 0
lsmod: jfs 156124 0
lsmod: ext3 115336 1
lsmod: jbd 45460 1 ext3
lsmod: vfat 11520 0
lsmod: fat 45852 1 vfat
lsmod: e100 31108 0
lsmod: eepro100 27920 0
lsmod: mii 5248 2 e100,eepro100
lsmod: eth1394 17412 0
lsmod: nls_iso8859_1 4224 0
lsmod: rsrc_nonstatic 11904 0
lsmod: pcmcia_core 36368 1 rsrc_nonstatic
lsmod: sbp2 20232 0
lsmod: isofs 31672 0
lsmod: ide_disk 14976 0
lsmod: ide_generic 1408 0 [permanent]
lsmod: pdc202xx_new 7936 0 [permanent]
lsmod: aec62xx 6784 0 [permanent]
lsmod: alim15x3 11020 0 [permanent]
lsmod: amd74xx 12700 0 [permanent]
lsmod: atiixp 5520 0 [permanent]
lsmod: cmd64x 10140 0 [permanent]
lsmod: cs5520 4608 0 [permanent]
lsmod: cs5530 4864 0 [permanent]
lsmod: cs5535 4224 0 [permanent]
lsmod: cy82c693 4356 0 [permanent]
lsmod: hpt34x 4992 0 [permanent]
lsmod: it821x 7812 0 [permanent]
lsmod: ns87415 4168 0 [permanent]
lsmod: opti621 4100 0 [permanent]
lsmod: pdc202xx_old 9472 0 [permanent]
lsmod: rz1000 2688 0 [permanent]
lsmod: sc1200 6656 0 [permanent]
lsmod: serverworks 8200 0 [permanent]
lsmod: siimage 10752 0 [permanent]
lsmod: sis5513 12424 0 [permanent]
lsmod: slc90e66 5120 0 [permanent]
lsmod: triflex 3712 0 [permanent]
lsmod: trm290 3972 0 [permanent]
lsmod: via82cxxx 8324 0 [permanent]
lsmod: floppy 52868 0
lsmod: usb_storage 69952 0
lsmod: vga16fb 11400 2
lsmod: vgastate 7808 1 vga16fb
lsmod: usbserial 28136 0
lsmod: usbkbd 6656 0
lsmod: usbhid 35040 0
lsmod: thermal 12680 0
lsmod: processor 21440 1 thermal
lsmod: fan 4484 0
lsmod: sd_mod 18448 3
lsmod: ide_cd 35104 0
lsmod: cdrom 32288 1 ide_cd
lsmod: generic 4356 0 [permanent]
lsmod: uhci_hcd 19464 0
lsmod: ehci_hcd 26888 0
lsmod: ata_piix 11524 2
lsmod: usbcore 108544 7 usb_storage,usbserial,usbkbd,usbhid,uhci_hcd,ehci_hcd
lsmod: piix 9220 0 [permanent]
lsmod: ide_core 107940 30 ide_disk,ide_generic,pdc202xx_new,aec62xx,alim15x3,amd74xx,atiixp,cmd64x,cs5520,cs5530,cs5535,cy82c693,hpt34x,it821x,ns87415,opti621,pdc202xx_old,rz1000,sc1200,serverworks,siimage,sis5513,slc90e66,triflex,trm290,via82cxxx,usb_storage,ide_cd,generic,piix
lsmod: libata 60300 1 ata_piix
lsmod: scsi_mod 120840 4 sbp2,usb_storage,sd_mod,libata
lsmod: ohci1394 29488 0
lsmod: ieee1394 84536 3 eth1394,sbp2,ohci1394
lsmod: parport_pc 31524 0
lsmod: parport 31944 1 parport_pc
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 518180 420 517760 0% /dev
df: tmpfs 518180 420 517760 0% /dev
df: tmpfs 518180 420 517760 0% /.dev
df: /dev/scsi/host1/bus0/target0/lun0/part4 94061352 2658980 86624240 3% /target
free: total used free shared buffers
free: Mem: 1036364 1005772 30592 0 64732
free: Swap: 1951856 416 1951440
free: Total: 2988220 1006188 1982032
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 30: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 31: cardctl: not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 15
/proc/cpuinfo: model : 2
/proc/cpuinfo: model name : Intel(R) Pentium(R) 4 CPU 2.80GHz
/proc/cpuinfo: stepping : 9
/proc/cpuinfo: cpu MHz : 2793.418
/proc/cpuinfo: cache size : 512 KB
/proc/cpuinfo: fdiv_bug : no
/proc/cpuinfo: hlt_bug : no
/proc/cpuinfo: f00f_bug : no
/proc/cpuinfo: coma_bug : no
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 2
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe up cid xtpr
/proc/cpuinfo: bogomips : 5591.27
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 0170-0177 : ide1
/proc/ioports: 0376-0376 : ide1
/proc/ioports: 0378-037a : parport0
/proc/ioports: 03c0-03df : vga+
/proc/ioports: 03f8-03ff : serial
/proc/ioports: 0778-077a : parport0
/proc/ioports: 0800-087f : 0000:00:1f.0
/proc/ioports: 0800-0803 : PM1a_EVT_BLK
/proc/ioports: 0804-0805 : PM1a_CNT_BLK
/proc/ioports: 0808-080b : PM_TMR
/proc/ioports: 0810-0815 : ACPI CPU throttle
/proc/ioports: 0828-082f : GPE0_BLK
/proc/ioports: 0880-08bf : 0000:00:1f.0
/proc/ioports: 0c00-0c7f : pnp 00:0a
/proc/ioports: c000-cfff : PCI Bus #02
/proc/ioports: cf00-cf3f : 0000:02:00.0
/proc/ioports: cf40-cf7f : 0000:02:08.0
/proc/ioports: cf40-cf7f : eepro100
/proc/ioports: d000-dfff : PCI Bus #01
/proc/ioports: de00-deff : 0000:01:00.0
/proc/ioports: efe0-efff : 0000:00:1f.3
/proc/ioports: fe00-fe07 : 0000:00:1f.2
/proc/ioports: fe00-fe07 : libata
/proc/ioports: fe10-fe13 : 0000:00:1f.2
/proc/ioports: fe10-fe13 : libata
/proc/ioports: fe20-fe27 : 0000:00:1f.2
/proc/ioports: fe20-fe27 : libata
/proc/ioports: fe30-fe33 : 0000:00:1f.2
/proc/ioports: fe30-fe33 : libata
/proc/ioports: fea0-feaf : 0000:00:1f.2
/proc/ioports: fea0-feaf : libata
/proc/ioports: ff20-ff3f : 0000:00:1d.3
/proc/ioports: ff20-ff3f : uhci_hcd
/proc/ioports: ff40-ff5f : 0000:00:1d.2
/proc/ioports: ff40-ff5f : uhci_hcd
/proc/ioports: ff60-ff7f : 0000:00:1d.1
/proc/ioports: ff60-ff7f : uhci_hcd
/proc/ioports: ff80-ff9f : 0000:00:1d.0
/proc/ioports: ff80-ff9f : uhci_hcd
/proc/ioports: ffa0-ffaf : 0000:00:1f.1
/proc/ioports: ffa8-ffaf : ide1
/proc/iomem: 00000000-0009ffff : System RAM
/proc/iomem: 00000000-00000000 : Crash kernel
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000ccfff : Video ROM
/proc/iomem: 000ce800-000cffff : Adapter ROM
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-3ff73fff : System RAM
/proc/iomem: 00100000-0026c0f2 : Kernel code
/proc/iomem: 0026c0f3-002f9cef : Kernel data
/proc/iomem: 3ff74000-3ff75fff : ACPI Non-volatile Storage
/proc/iomem: 3ff76000-3ff96fff : ACPI Tables
/proc/iomem: 3ff97000-3fffffff : reserved
/proc/iomem: e0000000-e7ffffff : 0000:00:00.0
/proc/iomem: e8000000-f7ffffff : PCI Bus #01
/proc/iomem: e8000000-efffffff : 0000:01:00.1
/proc/iomem: f0000000-f7ffffff : 0000:01:00.0
/proc/iomem: f8000000-fbffffff : PCI Bus #02
/proc/iomem: f8000000-fbffffff : 0000:02:02.0
/proc/iomem: fe800000-fe8fffff : PCI Bus #02
/proc/iomem: fe8fa800-fe8fafff : 0000:02:00.2
/proc/iomem: fe8fa800-fe8fafff : ohci1394
/proc/iomem: fe8fb000-fe8fbfff : 0000:02:08.0
/proc/iomem: fe8fb000-fe8fbfff : eepro100
/proc/iomem: fe8fc000-fe8fffff : 0000:02:00.2
/proc/iomem: fe900000-feafffff : PCI Bus #01
/proc/iomem: fe9e0000-fe9effff : 0000:01:00.0
/proc/iomem: fe9f0000-fe9fffff : 0000:01:00.1
/proc/iomem: fea00000-fea1ffff : 0000:01:00.0
/proc/iomem: febffc00-febfffff : 0000:00:1f.1
/proc/iomem: fec00000-fec0ffff : reserved
/proc/iomem: fecf0000-fecf0fff : reserved
/proc/iomem: fed20000-fed8ffff : reserved
/proc/iomem: fee00000-fee0ffff : reserved
/proc/iomem: ffa80800-ffa80bff : 0000:00:1d.7
/proc/iomem: ffa80800-ffa80bff : ehci_hcd
/proc/iomem: ffb00000-ffffffff : reserved
/proc/interrupts: CPU0
/proc/interrupts: 0: 1373821 IO-APIC-edge timer
/proc/interrupts: 1: 1593 IO-APIC-edge i8042
/proc/interrupts: 7: 0 IO-APIC-edge parport0
/proc/interrupts: 9: 0 IO-APIC-level acpi
/proc/interrupts: 15: 2045 IO-APIC-edge ide1
/proc/interrupts: 169: 3 IO-APIC-level ohci1394
/proc/interrupts: 177: 112825 IO-APIC-level libata, uhci_hcd:usb4
/proc/interrupts: 185: 4 IO-APIC-level ehci_hcd:usb1
/proc/interrupts: 193: 0 IO-APIC-level uhci_hcd:usb2, uhci_hcd:usb5
/proc/interrupts: 201: 55 IO-APIC-level uhci_hcd:usb3
/proc/interrupts: 209: 589512 IO-APIC-level eth1
/proc/interrupts: NMI: 0
/proc/interrupts: LOC: 1373799
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 1036364 kB
/proc/meminfo: MemFree: 30416 kB
/proc/meminfo: Buffers: 64732 kB
/proc/meminfo: Cached: 854436 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 362092 kB
/proc/meminfo: Inactive: 576016 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 1036364 kB
/proc/meminfo: LowFree: 30416 kB
/proc/meminfo: SwapTotal: 1951856 kB
/proc/meminfo: SwapFree: 1951440 kB
/proc/meminfo: Dirty: 4356 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: Mapped: 20616 kB
/proc/meminfo: Slab: 56940 kB
/proc/meminfo: CommitLimit: 2470036 kB
/proc/meminfo: Committed_AS: 22920 kB
/proc/meminfo: PageTables: 232 kB
/proc/meminfo: VmallocTotal: 253648 kB
/proc/meminfo: VmallocUsed: 9588 kB
/proc/meminfo: VmallocChunk: 243292 kB
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
/proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=4 2000000 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0003 Vendor=046d Product=c01e Version=2200
/proc/bus/input/devices: N: Name="Logitech USB-PS/2 Optical Mouse"
/proc/bus/input/devices: P: Phys=usb-0000:00:1d.1-1/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input1
/proc/bus/input/devices: H: Handlers=
/proc/bus/input/devices: B: EV=7
/proc/bus/input/devices: B: KEY=ff0000 0 0 0 0 0 0 0 0
/proc/bus/input/devices: B: REL=103
/proc/bus/input/devices:
dmidecode: # dmidecode 2.8
dmidecode: SMBIOS 2.3 present.
dmidecode: 65 structures occupying 2032 bytes.
dmidecode: Table at 0x000F0450.
dmidecode:
dmidecode: Handle 0xDA00, DMI type 218, 35 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: DA 23 00 DA B2 00 17 0B 0E 18 00 58 00 58 00 01
dmidecode: 00 59 00 59 00 01 00 05 80 05 80 01 00 FF FF 00
dmidecode: 00 00 00
dmidecode:
dmidecode: Handle 0xDA01, DMI type 218, 17 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: DA 11 01 DA B2 00 17 0B 0E 18 00 FF FF 00 00 00
dmidecode: 00
dmidecode:
dmidecode: Handle 0x0000, DMI type 0, 20 bytes
dmidecode: BIOS Information
dmidecode: Vendor: Dell Computer Corporation
dmidecode: Version: A07
dmidecode: Release Date: 09/27/2004
dmidecode: Address: 0xF0000
dmidecode: Runtime Size: 64 kB
dmidecode: ROM Size: 512 kB
dmidecode: Characteristics:
dmidecode: PCI is supported
dmidecode: PNP is supported
dmidecode: APM is supported
dmidecode: BIOS is upgradeable
dmidecode: BIOS shadowing is allowed
dmidecode: ESCD support is available
dmidecode: Boot from CD is supported
dmidecode: Selectable boot is supported
dmidecode: EDD is supported
dmidecode: Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
dmidecode: Print screen service is supported (int 5h)
dmidecode: 8042 keyboard services are supported (int 9h)
dmidecode: Serial services are supported (int 14h)
dmidecode: Printer services are supported (int 17h)
dmidecode: ACPI is supported
dmidecode: USB legacy is supported
dmidecode: AGP is supported
dmidecode: LS-120 boot is supported
dmidecode: BIOS boot specification is supported
dmidecode: Function key-initiated network boot is supported
dmidecode:
dmidecode: Handle 0x0100, DMI type 1, 25 bytes
dmidecode: System Information
dmidecode: Manufacturer: Dell Computer Corporation
dmidecode: Product Name: Dimension 8300
dmidecode: Version: Not Specified
dmidecode: Serial Number: FXQF11J
dmidecode: UUID: 44454C4C-5800-1051-8046-C6C04F31314A
dmidecode: Wake-up Type: APM Timer
dmidecode:
dmidecode: Handle 0x0200, DMI type 2, 8 bytes
dmidecode: Base Board Information
dmidecode: Manufacturer: Dell Computer Corp.
dmidecode: Product Name: 0W2562
dmidecode: Version:
dmidecode: Serial Number: ..CN481113CC0101.
dmidecode:
dmidecode: Handle 0x0300, DMI type 3, 13 bytes
dmidecode: Chassis Information
dmidecode: Manufacturer: Dell Computer Corporation
dmidecode: Type: Mini Tower
dmidecode: Lock: Not Present
dmidecode: Version: Not Specified
dmidecode: Serial Number: FXQF11J
dmidecode: Asset Tag:
dmidecode: Boot-up State: Safe
dmidecode: Power Supply State: Safe
dmidecode: Thermal State: Safe
dmidecode: Security Status: None
dmidecode:
dmidecode: Handle 0x0400, DMI type 4, 32 bytes
dmidecode: Processor Information
dmidecode: Socket Designation: Microprocessor
dmidecode: Type: Central Processor
dmidecode: Family: Pentium 4
dmidecode: Manufacturer: Intel
dmidecode: ID: 29 0F 00 00 FF FB EB BF
dmidecode: Signature: Type 0, Family 15, Model 2, Stepping 9
dmidecode: Flags:
dmidecode: FPU (Floating-point unit on-chip)
dmidecode: VME (Virtual mode extension)
dmidecode: DE (Debugging extension)
dmidecode: PSE (Page size extension)
dmidecode: TSC (Time stamp counter)
dmidecode: MSR (Model specific registers)
dmidecode: PAE (Physical address extension)
dmidecode: MCE (Machine check exception)
dmidecode: CX8 (CMPXCHG8 instruction supported)
dmidecode: APIC (On-chip APIC hardware supported)
dmidecode: SEP (Fast system call)
dmidecode: MTRR (Memory type range registers)
dmidecode: PGE (Page global enable)
dmidecode: MCA (Machine check architecture)
dmidecode: CMOV (Conditional move instruction supported)
dmidecode: PAT (Page attribute table)
dmidecode: PSE-36 (36-bit page size extension)
dmidecode: CLFSH (CLFLUSH instruction supported)
dmidecode: DS (Debug store)
dmidecode: ACPI (ACPI supported)
dmidecode: MMX (MMX technology supported)
dmidecode: FXSR (Fast floating-point save and restore)
dmidecode: SSE (Streaming SIMD extensions)
dmidecode: SSE2 (Streaming SIMD extensions 2)
dmidecode: SS (Self-snoop)
dmidecode: HTT (Hyper-threading technology)
dmidecode: TM (Thermal monitor supported)
dmidecode: PBE (Pending break enabled)
dmidecode: Version: Not Specified
dmidecode: Voltage: 1.5 V
dmidecode: External Clock: 800 MHz
dmidecode: Max Speed: 3600 MHz
dmidecode: Current Speed: 2800 MHz
dmidecode: Status: Populated, Enabled
dmidecode: Upgrade: ZIF Socket
dmidecode: L1 Cache Handle: 0x0700
dmidecode: L2 Cache Handle: 0x0701
dmidecode: L3 Cache Handle: Not Provided
dmidecode:
dmidecode: Handle 0x0700, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: Not Specified
dmidecode: Configuration: Enabled, Not Socketed, Level 1
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 8 KB
dmidecode: Maximum Size: 16 KB
dmidecode: Supported SRAM Types:
dmidecode: Other
dmidecode: Installed SRAM Type: Other
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: None
dmidecode: System Type: Data
dmidecode: Associativity: 4-way Set-associative
dmidecode:
dmidecode: Handle 0x0701, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: Not Specified
dmidecode: Configuration: Enabled, Not Socketed, Level 2
dmidecode: Operational Mode: Varies With Memory Address
dmidecode: Location: Internal
dmidecode: Installed Size: 512 KB
dmidecode: Maximum Size: 512 KB
dmidecode: Supported SRAM Types:
dmidecode: Other
dmidecode: Installed SRAM Type: Other
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Single-bit ECC
dmidecode: System Type: Unified
dmidecode: Associativity: Other
dmidecode:
dmidecode: Handle 0x0704, DMI type 126, 19 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x0800, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: PARALLEL
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: DB-25 female
dmidecode: Port Type: Parallel Port PS/2
dmidecode:
dmidecode: Handle 0x0801, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: SERIAL1
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: DB-9 male
dmidecode: Port Type: Serial Port 16550A Compatible
dmidecode:
dmidecode: Handle 0x0803, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: KYBD
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: PS/2
dmidecode: Port Type: Keyboard Port
dmidecode:
dmidecode: Handle 0x0804, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: MOUSE
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: PS/2
dmidecode: Port Type: Mouse Port
dmidecode:
dmidecode: Handle 0x0805, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: USB1
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0806, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: USB2
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0807, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: USB3
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0808, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: USB4
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0809, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: USB5
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x080A, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: USB6
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x080B, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: USB7
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x080C, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: USB8
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: Access Bus (USB)
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x080D, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: ENET
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: RJ-45
dmidecode: Port Type: Network Port
dmidecode:
dmidecode: Handle 0x080E, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: MIC
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x080F, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: LINE-OUT
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0818, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: LINE-OUT
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0819, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: LINE-OUT
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0810, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: LINE-IN
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0811, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: HP-OUT
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0901, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI1
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: ID: 1
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0902, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI2
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: ID: 2
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0903, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI3
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: ID: 3
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0904, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI4
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Long
dmidecode: ID: 4
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0905, DMI type 126, 13 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x090A, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: AGP1
dmidecode: Type: 32-bit AGP 8x
dmidecode: Current Usage: In Use
dmidecode: Length: Long
dmidecode: Characteristics:
dmidecode: 3.3 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0A02, DMI type 10, 6 bytes
dmidecode: On Board Device Information
dmidecode: Type: Ethernet
dmidecode: Status: Enabled
dmidecode: Description: Intel Pro 100 VE Network Connection
dmidecode:
dmidecode: Handle 0x0A03, DMI type 10, 6 bytes
dmidecode: On Board Device Information
dmidecode: Type: Sound
dmidecode: Status: Disabled
dmidecode: Description: AC'97 Audio Controller
dmidecode:
dmidecode: Handle 0x0B00, DMI type 11, 5 bytes
dmidecode: OEM Strings
dmidecode: String 1: www.dell.com
dmidecode:
dmidecode: Handle 0x0D00, DMI type 13, 22 bytes
dmidecode: BIOS Language Information
dmidecode: Installable Languages: 1
dmidecode: en|US|iso8859-1
dmidecode: Currently Installed Language: en|US|iso8859-1
dmidecode:
dmidecode: Handle 0x0F00, DMI type 15, 29 bytes
dmidecode: System Event Log
dmidecode: Area Length: 2049 bytes
dmidecode: Header Start Offset: 0x0000
dmidecode: Header Length: 16 bytes
dmidecode: Data Start Offset: 0x0010
dmidecode: Access Method: Memory-mapped physical 32-bit address
dmidecode: Access Address: 0xFFF82000
dmidecode: Status: Valid, Not Full
dmidecode: Change Token: 0x0000002B
dmidecode: Header Format: Type 1
dmidecode: Supported Log Type Descriptors: 3
dmidecode: Descriptor 1: POST error
dmidecode: Data Format 1: POST results bitmap
dmidecode: Descriptor 2: System limit exceeded
dmidecode: Data Format 2: System management
dmidecode: Descriptor 3: Log area reset/cleared
dmidecode: Data Format 3: None
dmidecode:
dmidecode: Handle 0x1000, DMI type 16, 15 bytes
dmidecode: Physical Memory Array
dmidecode: Location: System Board Or Motherboard
dmidecode: Use: System Memory
dmidecode: Error Correction Type: Single-bit ECC
dmidecode: Maximum Capacity: 4 GB
dmidecode: Error Information Handle: Not Provided
dmidecode: Number Of Devices: 4
dmidecode:
dmidecode: Handle 0x1100, DMI type 17, 23 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x1000
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 64 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: 512 MB
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: CHANNEL A DIMM 0
dmidecode: Bank Locator: Not Specified
dmidecode: Type: SDRAM
dmidecode: Type Detail: Synchronous
dmidecode: Speed: 400 MHz (2.5 ns)
dmidecode:
dmidecode: Handle 0x1101, DMI type 17, 23 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x1000
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 64 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: 512 MB
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: CHANNEL B DIMM 0
dmidecode: Bank Locator: Not Specified
dmidecode: Type: SDRAM
dmidecode: Type Detail: Synchronous
dmidecode: Speed: 400 MHz (2.5 ns)
dmidecode:
dmidecode: Handle 0x1102, DMI type 17, 23 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x1000
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 64 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: No Module Installed
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: CHANNEL A DIMM 1
dmidecode: Bank Locator: Not Specified
dmidecode: Type: SDRAM
dmidecode: Type Detail: Synchronous
dmidecode: Speed: 400 MHz (2.5 ns)
dmidecode:
dmidecode: Handle 0x1103, DMI type 17, 23 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x1000
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 64 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: No Module Installed
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: CHANNEL B DIMM 1
dmidecode: Bank Locator: Not Specified
dmidecode: Type: SDRAM
dmidecode: Type Detail: Synchronous
dmidecode: Speed: 400 MHz (2.5 ns)
dmidecode:
dmidecode: Handle 0x1301, DMI type 19, 15 bytes
dmidecode: Memory Array Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0003FFFFFFF
dmidecode: Range Size: 1 GB
dmidecode: Physical Array Handle: 0x1000
dmidecode: Partition Width: 0
dmidecode:
dmidecode: Handle 0x1402, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0001FFFFFFF
dmidecode: Range Size: 512 MB
dmidecode: Physical Device Handle: 0x1100
dmidecode: Memory Array Mapped Address Handle: 0x1301
dmidecode: Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x1403, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00020000000
dmidecode: Ending Address: 0x0003FFFFFFF
dmidecode: Range Size: 512 MB
dmidecode: Physical Device Handle: 0x1101
dmidecode: Memory Array Mapped Address Handle: 0x1301
dmidecode: Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x1404, DMI type 126, 19 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x1405, DMI type 126, 19 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x1800, DMI type 24, 5 bytes
dmidecode: Hardware Security
dmidecode: Power-On Password Status: Enabled
dmidecode: Keyboard Password Status: Not Implemented
dmidecode: Administrator Password Status: Enabled
dmidecode: Front Panel Reset Status: Not Implemented
dmidecode:
dmidecode: Handle 0x1900, DMI type 25, 9 bytes
dmidecode: System Power Controls
dmidecode: Next Scheduled Power-on: *-* 00:00:00
dmidecode:
dmidecode: Handle 0x1B00, DMI type 27, 12 bytes
dmidecode: Cooling Device
dmidecode: Type: Fan
dmidecode: Status: OK
dmidecode: OEM-specific Information: 0x00000000
dmidecode:
dmidecode: Handle 0x1F00, DMI type 31, 28 bytes
dmidecode: Boot Integrity Services Entry Point
dmidecode:
dmidecode: Handle 0x2000, DMI type 32, 11 bytes
dmidecode: System Boot Information
dmidecode: Status: No errors detected
dmidecode:
dmidecode: Handle 0xD000, DMI type 208, 10 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: D0 0A 00 D0 01 03 FE 00 57 01
dmidecode:
dmidecode: Handle 0xD100, DMI type 209, 12 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: D1 0C 00 D1 78 03 07 03 04 0F 80 05
dmidecode:
dmidecode: Handle 0xD200, DMI type 210, 12 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: D2 0C 00 D2 F8 03 04 03 06 80 04 05
dmidecode:
dmidecode: Handle 0xD400, DMI type 212, 177 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: D4 B1 00 D4 70 00 71 00 00 10 2D 2E 42 00 11 FE
dmidecode: 01 43 00 11 FE 00 0F 00 25 FC 00 10 00 25 FC 01
dmidecode: 11 00 25 FC 02 12 00 25 FC 03 07 00 23 8F 00 08
dmidecode: 00 23 F3 00 09 00 23 F3 04 0A 00 23 F3 08 0B 00
dmidecode: 23 8F 10 0C 00 23 8F 20 0E 00 23 8F 30 0D 00 23
dmidecode: 8C 40 A6 00 23 8C 41 A7 00 23 8C 42 05 01 22 FD
dmidecode: 02 06 01 22 FD 00 8C 00 22 FE 00 8D 00 22 FE 01
dmidecode: 9B 00 25 3F 40 9C 00 25 3F 00 09 01 25 3F 80 A8
dmidecode: 00 26 FE 01 A9 00 26 FE 00 A1 00 26 F3 00 A2 00
dmidecode: 26 F3 08 A3 00 26 F3 04 9F 00 26 FD 02 A0 00 26
dmidecode: FD 00 9D 00 11 FB 04 9E 00 11 FB 00 FF FF 00 00
dmidecode: 00
dmidecode:
dmidecode: Handle 0xD401, DMI type 212, 217 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: D4 D9 01 D4 70 00 71 00 03 40 59 6D 2D 00 59 FC
dmidecode: 02 2E 00 59 FC 00 6E 00 59 FC 01 28 00 59 3F 00
dmidecode: 29 00 59 3F 40 2A 00 59 3F 80 2B 00 5A 00 00 2C
dmidecode: 00 5B 00 00 55 00 59 F3 00 6D 00 59 F3 04 5C 00
dmidecode: 78 BF 40 5D 00 78 BF 00 04 80 78 F5 0A 01 A0 78
dmidecode: F5 00 1C 00 55 FB 04 1D 00 55 FB 00 19 00 55 E7
dmidecode: 00 1A 00 55 E7 08 1B 00 55 E7 10 1E 00 55 FD 00
dmidecode: 50 00 55 FD 02 93 00 7B 7F 80 94 00 7B 7F 00 23
dmidecode: 00 55 7F 00 22 00 55 7F 80 03 C0 67 00 05 8A 00
dmidecode: 37 DF 20 8B 00 37 DF 00 AC 00 51 CF 30 AD 00 51
dmidecode: CF 00 AE 00 51 CF 10 AF 00 51 CF 20 F5 00 58 BF
dmidecode: 40 F6 00 58 BF 00 EB 00 55 FE 00 EA 00 55 FE 01
dmidecode: 01 01 51 3F 00 02 01 51 3F 40 03 01 51 3F 80 04
dmidecode: 01 51 3F C0 FF FF 00 00 00
dmidecode:
dmidecode: Handle 0xD402, DMI type 212, 87 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: D4 57 02 D4 70 00 71 00 00 10 2D 2E 2D 01 21 FE
dmidecode: 01 2E 01 21 FE 00 E2 00 27 7F 00 E3 00 27 7F 80
dmidecode: E4 00 27 BF 00 E5 00 27 BF 40 07 01 27 DF 20 08
dmidecode: 01 27 DF 00 D1 00 22 7F 80 D2 00 22 7F 00 17 01
dmidecode: 28 FE 00 18 01 28 FE 01 19 01 28 FB 00 1A 01 28
dmidecode: FB 04 FF FF 00 00 00
dmidecode:
dmidecode: Handle 0xDE00, DMI type 222, 13 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: DE 0D 00 DE C1 01 00 00 05 11 13 01 01
dmidecode:
dmidecode: Handle 0xDF00, DMI type 223, 61 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: DF 3D 00 DF 0C 00 11 CE 00 00 00 00 00 00 00 F3
dmidecode: 07 68 E7 01 11 CE 00 00 00 00 00 00 00 F3 02 68
dmidecode: DD 02 11 FF FF FF FF FF FF FF FF FF FF FF FF 03
dmidecode: 11 FF FF FF FF FF FF FF FF FF FF FF FF
dmidecode:
dmidecode: Handle 0xDF01, DMI type 126, 33 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x7F00, DMI type 127, 4 bytes
dmidecode: End Of Table
dmidecode:
==============================================
Installer status:
==============================================
Package: input-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: input-modules
Depends: kernel-image-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di
Description: Input devices support
Package: acpi-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: acpi-modules
Depends: kernel-image-2.6.17-2-486-di
Description: ACPI support modules
Package: scsi-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: scsi-modules
Depends: kernel-image-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di, parport-modules-2.6.17-2-486-di, cdrom-core-modules-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di
Description: SCSI drivers
Package: preseed-common
Status: install ok unpacked
Version: 1.20
Depends: cdebconf-udeb, di-utils (>= 1.14)
Description: common files for preseeding
Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone
Package: localechooser
Status: install ok installed
Version: 1.29
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10
Package: cdrom-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: cdrom-modules
Depends: ide-modules-2.6.17-2-486-di, cdrom-core-modules-2.6.17-2-486-di, kernel-image-2.6.17-2-486-di
Description: Esoteric CDROM drivers
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6.ds1-4
Description: GNU C Library: NSS helper for DNS - udeb
Package: cdrom-checker
Status: install ok unpacked
Version: 1.09
Depends: cdrom-detect, cdebconf-udeb (>= 0.31)
Description: Verify the cd contents
Installer-Menu-Item: 940
Package: lowmemcheck
Status: install ok unpacked
Version: 1.21
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode
Package: cdrom-retriever
Status: install ok installed
Version: 1.12
Provides: retriever
Depends: cdebconf-udeb, cdrom-detect
Description: Fetch modules from a CDROM
Package: main-menu
Status: install ok unpacked
Version: 1.15
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: Debian installer main menu
Package: di-utils-shell
Status: install ok unpacked
Version: 1.39
Depends: cdebconf-udeb, di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950
Package: usb-serial-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: usb-serial-modules
Depends: kernel-image-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di
Description: USB serial drivers
Package: di-utils
Status: install ok installed
Version: 1.39
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: Miscellaneous utilities for the debian installer
Package: usb-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: usb-modules
Depends: kernel-image-2.6.17-2-486-di
Description: USB support
Package: pcmcia-storage-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: pcmcia-storage-modules
Depends: kernel-image-2.6.17-2-486-di, ide-core-modules-2.6.17-2-486-di, cdrom-core-modules-2.6.17-2-486-di, pcmcia-modules-2.6.17-2-486-di
Description: PCMCIA storage drivers
Package: scsi-core-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: scsi-core-modules
Depends: kernel-image-2.6.17-2-486-di
Description: Core SCSI subsystem
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.108
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.6-6), libnewt0.52
Description: Newt frontend for Debian Configuration Management System
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.2.2-3
Depends: libc6 (>= 2.3.6-6)
Description: tools for managing Linux kernel modules
Package: rootskel
Status: install ok installed
Version: 1.40
Depends: di-utils (>= 1.24), cdebconf-udeb
Description: Skeleton root filesystem used by debian-installer
Package: firmware-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: firmware-modules
Depends: kernel-image-2.6.17-2-486-di
Description: Firmware request modules
Package: udev-udeb
Status: install ok unpacked
Version: 0.100-2.2
Depends: libc6 (>= 2.3.6-6)
Description: /dev/ and hotplug management daemon
Package: fb-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: fb-modules
Depends: kernel-image-2.6.17-2-486-di
Description: Frame buffer support
Package: brltty-udeb
Status: install ok unpacked
Version: 3.7.2-4
Depends: libc6 (>= 2.3.6-6)
Description: Access software for a blind person using a soft braille terminal
Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-4
Depends: libc6 (>= 2.3.6-6)
Description: Free Implementation of the Unicode BiDi algorithm
Package: scsi-common-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: scsi-common-modules
Depends: kernel-image-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di, cdrom-core-modules-2.6.17-2-486-di
Description: Very common SCSI drivers
Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.6-6)
Description: text-wrapping library with i18n - runtime udeb
Package: pcmcia-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: pcmcia-modules
Depends: kernel-image-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di
Description: Common PCMCIA drivers
Package: auto-install
Status: install ok unpacked
Version: 0.02
Depends: netcfg, preseed-common (>= 1.18)
Description: Support for automatic installs
Installer-Menu-Item: 19
Package: usb-discover
Status: install ok unpacked
Version: 1.06
Depends: cdebconf-udeb
Description: Discover USB and load kernel modules
Package: serial-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: serial-modules
Depends: kernel-image-2.6.17-2-486-di, pcmcia-modules-2.6.17-2-486-di
Description: Serial drivers
Package: ide-core-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: ide-core-modules
Depends: kernel-image-2.6.17-2-486-di
Description: IDE support
Package: rescue-check
Status: install ok unpacked
Version: 1.7
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested
Package: nano-udeb
Status: install ok unpacked
Version: 1.9.99pre2-1
Provides: editor
Depends: libc6 (>= 2.3.6-6), libslang2-udeb (>= 2.0.6-3)
Description: free Pico clone with some new features - tiny build
Package: cdebconf-udeb
Status: install ok installed
Version: 0.108
Provides: debconf-2.0
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45), libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)
Package: ai-choosers
Status: install ok unpacked
Version: 0.02
Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23)
Description: Delayed configuration of locale and keyboard for auto-install
Installer-Menu-Item: 22
Package: floppy-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: floppy-modules
Depends: kernel-image-2.6.17-2-486-di
Description: Floppy driver
Package: libiw28-udeb
Status: install ok installed
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions
Package: parport-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: parport-modules
Depends: kernel-image-2.6.17-2-486-di
Description: Parallel port support
Package: load-cdrom
Status: install ok installed
Version: 1.12
Depends: cdebconf-udeb, cdrom-retriever, anna (>= 1.07)
Description: Load installer components from CD
Installer-Menu-Item: 16
Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.108
Depends: cdebconf-udeb, libc6 (>= 2.3.6-6)
Description: Plain text frontend for Debian Configuration Management System
Package: firewire-core-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.17-2-486-di, kernel-image-2.6.17-2-486-di
Description: Core FireWire drivers
Package: iso-3166-udeb
Status: install ok installed
Version: 0.57-1
Description: provides iso_3166.tab file
Package: floppy-retriever
Status: install ok unpacked
Version: 1.11
Provides: retriever
Depends: cdebconf-udeb, mountfloppy
Description: Fetches modules from a floppy
Package: ethdetect
Status: install ok installed
Version: 1.43
Provides: ethernet-card-detection
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 18
Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-3
Depends: libc6 (>= 2.3.6-6)
Description: Tiny utilities for the debian-installer
Package: initrd-preseed
Status: install ok unpacked
Version: 1.20
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd
Package: archdetect
Status: install ok installed
Version: 1.43
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45)
Description: Hardware architecture detector
Package: cdrom-core-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: cdrom-core-modules
Depends: kernel-image-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di, ide-modules-2.6.17-2-486-di
Description: CDROM support
Package: save-logs
Status: install ok unpacked
Version: 2.23
Depends: cdebconf-udeb
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.39
Depends: cdebconf-udeb
Description: Reboot
Installer-Menu-Item: 995
Package: anna
Status: install ok installed
Version: 1.25
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: libsysfs2-udeb
Status: install ok unpacked
Version: 2.0.0-7
Provides: libsysfs2
Depends: libc6 (>= 2.3.6-6)
Description: interface library to sysfs
Package: pcmciautils-udeb
Status: install ok unpacked
Version: 014-2
Depends: udev-udeb, libc6 (>= 2.3.6-6), libsysfs2-udeb
Description: PCMCIA utilities for Linux 2.6
Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.4~pre4-1
Depends: libc6 (>= 2.3.6-6)
Description: Linux PCI Utilities (udeb)
Package: console-keymaps-at
Status: install ok installed
Version: 2:1.01-1
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards
Package: usb-storage-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: usb-storage-modules
Depends: ide-core-modules-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di
Description: USB storage support
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.39
Description: Terminfo entries needed by newt/slang in debian installer
Package: hw-detect
Status: install ok installed
Version: 1.43
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it
Package: kbd-chooser
Status: install ok installed
Version: 1.31
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.45
Depends: libc6 (>= 2.3.6-6)
Description: Library of common debian-installer functions
Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale
Package: env-preseed
Status: install ok unpacked
Version: 1.20
Description: debconf preseeding via environment variables
Package: mountfloppy
Status: install ok unpacked
Version: 0.8
Depends: cdebconf-udeb, di-utils (>= 1.15)
Description: Mounts a floppy
Package: cdebconf-priority
Status: install ok unpacked
Version: 0.108
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930
Package: fat-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: fat-modules
Depends: kernel-image-2.6.17-2-486-di
Description: FAT filesystem support
Package: netcfg
Status: install ok installed
Version: 1.31
Provides: configured-network
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Description: Configure the network
Installer-Menu-Item: 18
Package: file-preseed
Status: install ok unpacked
Version: 1.20
Depends: cdebconf-udeb, di-utils, preseed-common
Description: load debconf preseed file
Installer-Menu-Item: 14
Package: sata-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: sata-modules
Depends: kernel-image-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di
Description: SATA drivers
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.108
Depends: libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.5
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: ide-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: ide-modules
Depends: kernel-image-2.6.17-2-486-di, ide-core-modules-2.6.17-2-486-di
Description: IDE drivers
Package: cdrom-detect
Status: install ok installed
Version: 1.18
Depends: cdebconf-udeb, hw-detect, di-utils (>= 1.33)
Description: Detect CDROM devices and mount the CD
Installer-Menu-Item: 13
Package: kernel-image-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer
Package: debian-installer
Status: install ok installed
Version: cdrom-isolinux-20061102
Description: debian installation image
Package: apt-cdrom-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 44
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: cdrom-detect, cdebconf-udeb
Provides: apt-mirror-setup
Description: set up a CD in sources.list
Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 152
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: choose-mirror-bin, cdebconf-udeb
Description: set up a mirror in sources.list
Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: apt-mirror-setup, base-installer (>= 1.49), cdebconf-udeb
Description: Configure apt
Installer-Menu-Item: 70
Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 596
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.68
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19)
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65
Package: choose-mirror-bin
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 272
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.08
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: Choose mirror to install from (program)
Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 72
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.12
Depends: cdebconf-udeb, os-prober, tzsetup-udeb
Description: set up clock
Installer-Menu-Item: 62
Package: crc-modules-2.6.17-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: crc-modules
Description: CRC modules
This package contains CRC support modules.
Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 168
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3
Depends: libc6 (>= 2.3.5-1), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: dhcp-client-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 100
Maintainer: Eloy A. Paris <peloy@debian.org>
Version: 2.0pl5-19.4
Depends: libc6 (>= 2.3.5-1)
Description: DHCP Client for debian-installer
dhcp-client-udeb is a minimal dhcp package used by the debian-installer.
Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.39
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45)
Description: mapdevfs utility for the debian installer
Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 60
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.43
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35
Package: dmidecode-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 60
Maintainer: Petter Reinholdtsen <pere@debian.org>
Version: 2.8-2
Depends: libc6 (>= 2.3.5-1)
Description: Dump Desktop Management Interface data (udeb)
Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 356
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.10.02+dfsg-2
Depends: libblkid1-udeb, libc6 (>= 2.3.6-6)
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: elilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 96
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.7
Depends: cdebconf-udeb, base-installer, partconf-find-partitions (>= 1.08), di-utils-mapdevfs, fat-modules, firmware-modules, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install elilo on a hard disk
This udeb will install elilo on the hard disk.
Installer-Menu-Item: 76
Package: ext3-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 236
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: ext3-modules
Description: EXT3 filesystem support
This package contains the EXT3 filesystem module for the Linux kernel.
Package: fdisk-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 136
Maintainer: LaMont Jones <lamont@debian.org>
Version: 2.12r-12
Depends: libc6 (>= 2.3.6-6)
Description: Partition a hard drive (manual)
fdisk package
Package: finish-install
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.5
Depends: cdebconf-udeb, archdetect, base-installer, created-fstab, bootable-system
Provides: prebaseconfig
Description: Finish the installation and reboot
Installer-Menu-Item: 78
Package: grub-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 356
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.19
Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>= 1.15), di-utils-mapdevfs, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install GRUB on a hard disk
Installer-Menu-Item: 73
Package: jfs-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 212
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: jfs-modules
Description: JFS filesystem support
This package contains the JFS filesystem module for the Linux kernel.
Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 984
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of jfsutils, for debian-installer
This package is a jfsutils package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 40
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.10.02+dfsg-2
Depends: libc6 (>= 2.3.6-6)
Provides: libblkid1
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 1584
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6.ds1-7
Provides: libc6, libc-udeb, glibc-2.3.6.ds1-1, glibc-2.3.6-2
Description: GNU C Library: Shared libraries - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains a minimal set of libraries needed for the Debian
installer. Do not install it on a normal system.
Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 52
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.08-1
Depends: libc6 (>= 2.3.6-6)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
This is a udeb, or a microdeb, for the debian-installer.
.
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 328
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-2.1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.10.02+dfsg-2
Depends: libc6 (>= 2.3.6-6)
Provides: libuuid1
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's),
using a standard which is blessed by both Microsoft and DCE, and is
being proposed as an internet standard. See the internet-draft:
.
draft-leach-uuids-guids-01.txt
.
for more information.
.
This is a minimal package for debian-installer.
Package: lilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.18
Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15), di-utils-mapdevfs, fdisk-udeb, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install LILO on a hard disk
Installer-Menu-Item: 75
Package: loop-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: loop-modules
Description: Loopback filesystem support
This package contains loopback filesystem support for the Linux kernel.
Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 428
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.06-3
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
This is a udeb, or a microdeb, for the debian-installer.
.
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Package: md-modules-2.6.17-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 348
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: md-modules
Description: RAID and LVM support
This package contains RAID and LVM modules for the Linux kernel.
Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 176
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 2.5.3.git200608202239-7
Depends: libc6 (>= 2.3.6-6)
Description: tool to administer Linux MD arrays (software RAID)
mdadm is a program that can be used to create, manage, and monitor MD
arrays (e.g. software RAID, multipath devices).
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 384
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.19
Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb (>= 2.5.2), partconf-find-partitions
Description: Configure MD devices
Use this module to configure the MD devices.
Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 144
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-4
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: User-level tools for ReiserFS filesystems
This installer module contains the utility to create ReiserFS filesystems.
.
Homepage: http://www.namesys.com/
Package: network-preseed
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.20
Depends: cdebconf-udeb, configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21
Package: nic-extra-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 2872
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di, nic-shared-modules-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di, crc-modules-2.6.17-2-486-di
Provides: nic-extra-modules
Description: Rare NIC drivers
This package contains rare NIC drivers for the Linux kernel.
Package: nic-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 444
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di, nic-shared-modules-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di, firewire-core-modules-2.6.17-2-486-di
Provides: nic-modules
Description: Common NIC drivers
This package contains common NIC drivers for the Linux kernel.
Package: nic-pcmcia-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 556
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di, nic-shared-modules-2.6.17-2-486-di, nic-extra-modules-2.6.17-2-486-di, pcmcia-modules-2.6.17-2-486-di
Provides: nic-pcmcia-modules
Description: Common PCMCIA NIC drivers
This package contains common PCMCIA NIC drivers for the Linux kernel.
Package: nic-shared-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: nic-shared-modules
Description: Shared NIC drivers
This package contains NIC drivers needed by combinations of nic-modules,
nic-extra-modules, and nic-pcmcia-modules.
Package: nic-usb-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 188
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di, nic-shared-modules-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di
Provides: nic-usb-modules
Description: USB NIC drivers
This package contains USB network adapter drivers for the Linux kernel.
Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 144
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.13
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
This package will skip installing a boot-loader
Installer-Menu-Item: 77
Package: ntfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 244
Maintainer: David MartÃnez Moreno <ender@debian.org>
Version: 1.13.1-4
Depends: libc6 (>= 2.3.6-6)
Provides: ntfstools-udeb
Description: Tools for doing neat things in NTFS partitions from Linux - udeb
Currently this udeb contains only ntfsresize.
Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 68
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
This package is to be used by boot loader installers to detect other OSes
available on a system, in a generic format, which it can then adapt to its
own configuration format.
Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.19
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45), libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for finding partitions
Helper program for finding partitions and detecting their size and
existing file system.
Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 60
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-2.1
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1)
Provides: parted
Description: The GNU Parted disk partition resizing program
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package is similar to the "big" parted package, but has
less cosmetical features resulting in smaller binary. Intended
to be used in debian-installer.
.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 356
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 60
Depends: cdebconf-udeb, di-utils, partman-base, partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)
Package: partman-auto-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 3
Depends: cdebconf-udeb, partman-auto (>= 55), partman-auto-lvm (>= 14), partman-crypto (>= 13), partman-base (>= 87)
Description: Automatically partition storage devices using crypto and LVM
Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 148
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 18
Depends: cdebconf-udeb, partman-base (>= 73), partman-auto (>= 59), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM
Package: partman-auto-raid
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2
Depends: cdebconf-udeb, partman-base, partman-basicfilesystems, partman-ext3, partman-auto (>= 58), partman-md
Description: Allow preseeded RAID installs
Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 848
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 97
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42
Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 576
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 49
Depends: cdebconf-udeb, e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32
Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 124
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 32
Depends: cdebconf-udeb
Provides: partman-method
Description: Basic partition usage methods for partman
This package provides partman with two methods to use partitions.
The first is to format the partition. The second is to keep and use
the existing data in the partition as it is.
Package: partman-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 856
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 17
Depends: partman-base (>= 87), libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Add to partman support for block device encryption
Package: partman-efi
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 11
Depends: partman-base
Description: Add to partman support for EFI boot partitions
Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 43
Depends: cdebconf-udeb, e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3
Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 260
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 18
Depends: cdebconf-udeb, jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman
Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 680
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 47
Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb
Description: Adds support for LVM to partman
Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 156
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 30
Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87)
Description: Add to partman support for MD
Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 364
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 44
Depends: ntfsprogs-udeb, cdebconf-udeb
Description: Partitioning operations for partman
This udeb provides partman with editing operations for creation
of new partitions, deletion of partitions and initialisation of the
partition table.
Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 228
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 32
Depends: cdebconf-udeb, mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs
Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 304
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 46
Depends: cdebconf-udeb, partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
This udeb allows the user to choose how partitions should be used.
Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 30
Depends: cdebconf-udeb, xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs
Package: pcmcia-cs-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 232
Maintainer: Per Olofsson <pelle@debian.org>
Version: 3.2.8-9
Description: PCMCIA Card Services for Linux (udeb)
Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 28
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.10
Depends: cdebconf-udeb, apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70
Package: reiserfs-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 268
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: reiserfs-modules
Description: Reiser filesystem support
This package contains the Reiser filesystem module for the Linux kernel.
Package: scsi-extra-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1316
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: scsi-modules-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
This package contains uncommon SCSI drivers for the Linux kernel.
This includes SCSI RAID drivers, and some of the less common SCSI
controllers.
Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 292
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.12
Depends: cdebconf-udeb, localechooser
Description: choose timezone
Installer-Menu-Item: 62
Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 336
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.7
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63
Package: wireless-tools-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 28
Maintainer: Guus Sliepen <guus@debian.org>
Version: 28-1
Depends: libc6 (>= 2.3.5-1), libiw28-udeb (>= 28)
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: xfs-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 568
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: xfs-modules
Description: XFS filesystem support
This package contains the XFS filesystem module for the Linux kernel.
Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 232
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.8.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of xfsprogs, for debian-installer
This package is an xfsprogs package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: cdebconf-newt-entropy
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.4
Depends: cdebconf-newt-udeb, libc6 (>= 2.3.6-6), libnewt0.52
Description: cdebconf newt plugin for reading from /dev/random
cdebconf plugin to facilitate reading random data from /dev/random.
Asks the user to enter random characters on the keyboard and shows a
progressbar with percent-of-data read.
Package: crypto-modules-2.6.17-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 164
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: crypto-modules
Description: crypto modules
This package contains crypto modules.
Package: cryptsetup-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 456
Maintainer: Debian Cryptsetup Team <pkg-cryptsetup-devel@lists.alioth.debian.org>
Version: 2:1.0.4-3
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2), libpopt0-udeb (>= 1.10), libuuid1-udeb, dmsetup-udeb
Description: configures encrypted block devices
Since kernel 2.6.4, encrypted filesystem support is provided by the device
mapper target dm-crypt. This utility provides a command-line interface for
configuring this facility. It has integrated support for LUKS.
.
cryptsetup is backwards compatible with the on-disk format of cryptoloop,
but also supports more secure formats. This package also includes support
for automatically configuring encrypted devices at boot time via the config
file /etc/crypttab. When combined with newer versions of the debian
initrd-tools and standard debian kernels, cryptoroot is also supported.
Package: dmsetup-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.08-1
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Kernel Device Mapper userspace library
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
.
This package contains a utility for modifying device mappings.
Package: libpopt0-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Paul Martin <pm@debian.org>
Version: 1.10-3
Depends: libc6 (>= 2.3.6-6)
Description: lib for parsing cmdline parameters
Popt was heavily influenced by the getopt() and getopt_long() functions,
but it allows more powerful argument expansion. It can parse arbitrary
argv[] style arrays and automatically set variables based on command
line arguments. It also allows command line arguments to be aliased via
configuration files and includes utility functions for parsing arbitrary
strings into argv[] arrays using shell-like rules.
.
This package contains the runtime library and locale data.
.
This is a minimal package for use in debian-installer.
Package: partman-crypto-dm
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 17
Depends: partman-crypto, crypto-modules, cryptsetup-udeb, cdebconf-newt-entropy (>= 0.3)
Description: Add to partman support for dm-crypt encryption
Package: gnupg-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 668
Maintainer: James Troup <james@nocrew.org>
Version: 1.4.5-1
Depends: libc6 (>= 2.3.6-6), libusb-0.1-udeb (>= 2:0.1.12), zlib1g-udeb (>= 1:1.2.1)
Description: GNU privacy guard - a free PGP replacement
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC2440.
.
This is GnuPG packaged in minimal form for use in debian-installer.
Package: libusb-0.1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Aurelien Jarno <aurel32@debian.org>
Version: 2:0.1.12-2
Depends: libc6 (>= 2.3.5-1)
Provides: libusb-0.1-4
Description: userspace USB programming library
Library for programming USB applications without the knowledge
of Linux kernel internals.
.
More information can be found at the Linux USB web site
http://www.linux-usb.org/ .
.
This is a minimal package for use in debian-installer.
Package: loop-aes-2.6.17-2-486-di
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 148
Maintainer: Max Vozeler <xam@debian.org>
Version: 3.1d+3+5
Depends: kernel-image-2.6.17-2-486-di, mount-aes-udeb (>= 2.12p-1)
Provides: loop-aes-modules
Description: loop-AES encryption modules for kernel 2.6.17-2-486-di
This package contains the loop-AES loadable Linux kernel modules
compiled for kernel 2.6.17-2-486-di
.
loop-AES can be used to encrypt disk partitions, removable media,
swap space and other devices. It provides measures to strengthen
the encryption: Passphrase seeds, multiple hash iterations, MD5 IV
and use of alternating encryption keys.
.
Encryption keys can be stored in a GnuPG-encrypted keyfile, which
allows the passphrase to be changed without re-encryption. Keyfiles
can also be encrypted asymmetrically for multi-user access.
.
This package includes the cipher modules blowfish, twofish and
serpent in addition to the default cipher (AES).
.
If you compiled a custom kernel, you will most likely need to
compile a custom version of these modules as well. The package
loop-aes-source has been provided for this purpose.
Package: mount-aes-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 216
Maintainer: Max Vozeler <xam@debian.org>
Version: 2.12r-14
Depends: libblkid1-udeb (>= 1.37-1), libc6 (>= 2.3.6-6), libuuid1-udeb
Description: Mount utils for loop-AES
loop-AES patched mount, losetup and swapon
Package: partman-crypto-loop
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 136
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 17
Depends: partman-crypto, loop-aes-modules, mount-aes-udeb, gnupg-udeb, cdebconf-newt-entropy (>= 0.3)
Description: Add to partman support for loop-AES encryption
Package: zlib1g-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 100
Maintainer: Mark Brown <broonie@debian.org>
Version: 1:1.2.3-13
Provides: zlib1g
Description: compression library - runtime for Debian installer
zlib is a library implementing the deflate compression method found
in gzip and PKZIP. This minimal package includes the shared library
for use with the Debian installer.
Package: ntfs-modules-2.6.17-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 248
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: ntfs-modules
Description: NTFS filesystem support
This package contains the NTFS file system module for the Linux kernel.
Package: qnx4-modules-2.6.17-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: qnx4-modules
Description: QNX4 filesystem support
This package contains the QNX4 filesystem module for the Linux kernel.
==============================================
Installer syslog:
==============================================
Nov 9 20:57:53 syslogd started: BusyBox v1.1.3
Nov 9 20:57:53 kernel: klogd started: BusyBox v1.1.3 (Debian 1:1.1.3-3)
Nov 9 20:57:53 kernel: Linux version 2.6.17-2-486 (Debian 2.6.17-9) (waldi@debian.org) (gcc version 4.1.2 20060901 (prerelease) (Debian 4.1.1-13)) #1 Wed Sep 13 15:56:30 UTC 2006
Nov 9 20:57:53 kernel: BIOS-provided physical RAM map:
Nov 9 20:57:53 kernel: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
Nov 9 20:57:53 kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Nov 9 20:57:53 kernel: BIOS-e820: 0000000000100000 - 000000003ff74000 (usable)
Nov 9 20:57:53 kernel: BIOS-e820: 000000003ff74000 - 000000003ff76000 (ACPI NVS)
Nov 9 20:57:53 kernel: BIOS-e820: 000000003ff76000 - 000000003ff97000 (ACPI data)
Nov 9 20:57:53 kernel: BIOS-e820: 000000003ff97000 - 0000000040000000 (reserved)
Nov 9 20:57:53 kernel: BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Nov 9 20:57:53 kernel: BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved)
Nov 9 20:57:53 kernel: BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
Nov 9 20:57:53 kernel: BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
Nov 9 20:57:53 kernel: BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
Nov 9 20:57:53 kernel: 1023MB LOWMEM available.
Nov 9 20:57:53 kernel: found SMP MP-table at 000fe710
Nov 9 20:57:53 kernel: On node 0 totalpages: 262004
Nov 9 20:57:53 kernel: DMA zone: 4096 pages, LIFO batch:0
Nov 9 20:57:53 kernel: Normal zone: 257908 pages, LIFO batch:31
Nov 9 20:57:53 kernel: DMI 2.3 present.
Nov 9 20:57:53 kernel: ACPI: RSDP (v000 DELL ) @ 0x000feb90
Nov 9 20:57:53 kernel: ACPI: RSDT (v001 DELL 8300 0x00000008 ASL 0x00000061) @ 0x000fd1ca
Nov 9 20:57:53 kernel: ACPI: FADT (v001 DELL 8300 0x00000008 ASL 0x00000061) @ 0x000fd1fe
Nov 9 20:57:53 kernel: ACPI: SSDT (v001 DELL st_ex 0x00001000 MSFT 0x0100000d) @ 0xfffc929b
Nov 9 20:57:53 kernel: ACPI: MADT (v001 DELL 8300 0x00000008 ASL 0x00000061) @ 0x000fd272
Nov 9 20:57:53 kernel: ACPI: BOOT (v001 DELL 8300 0x00000008 ASL 0x00000061) @ 0x000fd2de
Nov 9 20:57:53 kernel: ACPI: DSDT (v001 DELL dt_ex 0x00001000 MSFT 0x0100000d) @ 0x00000000
Nov 9 20:57:53 kernel: ACPI: PM-Timer IO Port: 0x808
Nov 9 20:57:53 kernel: ACPI: Local APIC address 0xfee00000
Nov 9 20:57:53 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Nov 9 20:57:53 kernel: Processor #0 15:2 APIC version 20
Nov 9 20:57:53 kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
Nov 9 20:57:53 kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
Nov 9 20:57:53 kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
Nov 9 20:57:53 kernel: ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
Nov 9 20:57:53 kernel: IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
Nov 9 20:57:53 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Nov 9 20:57:53 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Nov 9 20:57:53 kernel: ACPI: IRQ0 used by override.
Nov 9 20:57:53 kernel: ACPI: IRQ2 used by override.
Nov 9 20:57:53 kernel: ACPI: IRQ9 used by override.
Nov 9 20:57:53 kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
Nov 9 20:57:53 kernel: Using ACPI (MADT) for SMP configuration information
Nov 9 20:57:53 kernel: Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
Nov 9 20:57:53 kernel: Built 1 zonelists
Nov 9 20:57:53 kernel: Kernel command line: vga=normal initrd=/install/initrd.gz -- BOOT_IMAGE=/install/vmlinuz
Nov 9 20:57:53 kernel: mapped APIC to ffffd000 (fee00000)
Nov 9 20:57:53 kernel: mapped IOAPIC to ffffc000 (fec00000)
Nov 9 20:57:53 kernel: Enabling fast FPU save and restore... done.
Nov 9 20:57:53 kernel: Enabling unmasked SIMD FPU exception support... done.
Nov 9 20:57:53 kernel: Initializing CPU#0
Nov 9 20:57:53 kernel: PID hash table entries: 4096 (order: 12, 16384 bytes)
Nov 9 20:57:53 kernel: Detected 2793.418 MHz processor.
Nov 9 20:57:53 kernel: Using pmtmr for high-res timesource
Nov 9 20:57:53 kernel: Console: colour VGA+ 80x25
Nov 9 20:57:53 kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Nov 9 20:57:53 kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Nov 9 20:57:53 kernel: Memory: 1032232k/1048016k available (1456k kernel code, 15180k reserved, 566k data, 252k init, 0k highmem)
Nov 9 20:57:53 kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Nov 9 20:57:53 kernel: Calibrating delay using timer specific routine.. 5591.27 BogoMIPS (lpj=11182556)
Nov 9 20:57:53 kernel: Security Framework v1.0.0 initialized
Nov 9 20:57:53 kernel: SELinux:
__________________________________________________________________________
Erweitern Sie FreeMail zu einem noch leistungsstärkeren E-Mail-Postfach!
Mehr Infos unter http://freemail.web.de/home/landingpad/?mc=021131
Reply to: