Bug#396925: installation-report: Everything worked well
Package: installation-reports
Version: 2.23
Severity: normal
-- Package-specific info:
Boot method: netinst CD image
Image version: http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/amd64/iso-cd/debian-testing-amd64-netinst.iso 02-Nov-2006 05:21
Date: 03-Nov-2006 18:30
Machine: Asus M2N-E motherboard
Processor: AMD Athlon 64 3500+ AM2 64
Memory: 1x 1 GB DDR2
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [ ]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
Well, everything worked well during the install.
I left unchecked "Clock/timezone setup" because there was no question
about the timezone, and about the harware clock to GMT difference.
The time is now set supposing the hardware clock is set to GMT.
--
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="3.1 (installer build 20061031)"
X_INSTALLATION_MEDIUM=cdrom
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux debian 2.6.17-2-amd64 #1 SMP Wed Sep 13 17:49:33 CEST 2006 x86_64 unknown
lspci -nn: 00:00.0 RAM memory [0500]: nVidia Corporation MCP55 Memory Controller [10de:0369] (rev a1)
lspci -nn: 00:01.0 ISA bridge [0601]: nVidia Corporation MCP55 LPC Bridge [10de:0360] (rev a2)
lspci -nn: 00:01.1 SMBus [0c05]: nVidia Corporation MCP55 SMBus [10de:0368] (rev a2)
lspci -nn: 00:01.2 RAM memory [0500]: nVidia Corporation MCP55 Memory Controller [10de:036a] (rev a2)
lspci -nn: 00:02.0 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller [10de:036c] (rev a1)
lspci -nn: 00:02.1 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller [10de:036d] (rev a2)
lspci -nn: 00:04.0 IDE interface [0101]: nVidia Corporation MCP55 IDE [10de:036e] (rev a1)
lspci -nn: 00:05.0 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a2)
lspci -nn: 00:05.1 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a2)
lspci -nn: 00:05.2 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a2)
lspci -nn: 00:06.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI bridge [10de:0370] (rev a2)
lspci -nn: 00:06.1 Audio device [0403]: nVidia Corporation MCP55 High Definition Audio [10de:0371] (rev a2)
lspci -nn: 00:08.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet [10de:0373] (rev a2)
lspci -nn: 00:0a.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0376] (rev a2)
lspci -nn: 00:0b.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0374] (rev a2)
lspci -nn: 00:0c.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0374] (rev a2)
lspci -nn: 00:0d.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0378] (rev a2)
lspci -nn: 00:0e.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0375] (rev a2)
lspci -nn: 00:0f.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0377] (rev a2)
lspci -nn: 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
lspci -nn: 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
lspci -nn: 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
lspci -nn: 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
lspci -nn: 07:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV530 [Radeon X1600] [1002:71c2]
lspci -nn: 07:00.1 Display controller [0380]: ATI Technologies Inc RV530 [Radeon X1600] (Secondary) [1002:71e2]
lspci -vnn: 00:00.0 RAM memory [0500]: nVidia Corporation MCP55 Memory Controller [10de:0369] (rev a1)
lspci -vnn: Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8239]
lspci -vnn: Flags: bus master, 66MHz, fast devsel, latency 0
lspci -vnn: Capabilities: [44] HyperTransport: Slave or Primary Interface
lspci -vnn: Capabilities: [e0] #00 [fee0]
lspci -vnn:
lspci -vnn: 00:01.0 ISA bridge [0601]: nVidia Corporation MCP55 LPC Bridge [10de:0360] (rev a2)
lspci -vnn: Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8239]
lspci -vnn: Flags: bus master, 66MHz, fast devsel, latency 0
lspci -vnn:
lspci -vnn: 00:01.1 SMBus [0c05]: nVidia Corporation MCP55 SMBus [10de:0368] (rev a2)
lspci -vnn: Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8239]
lspci -vnn: Flags: 66MHz, fast devsel, IRQ 255
lspci -vnn: I/O ports at fc00 [size=64]
lspci -vnn: I/O ports at 1c00 [size=64]
lspci -vnn: I/O ports at 1c40 [size=64]
lspci -vnn: Capabilities: [44] Power Management version 2
lspci -vnn:
lspci -vnn: 00:01.2 RAM memory [0500]: nVidia Corporation MCP55 Memory Controller [10de:036a] (rev a2)
lspci -vnn: Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8239]
lspci -vnn: Flags: 66MHz, fast devsel
lspci -vnn:
lspci -vnn: 00:02.0 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller [10de:036c] (rev a1) (prog-if 10)
lspci -vnn: Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8239]
lspci -vnn: Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 233
lspci -vnn: Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn: Capabilities: [44] Power Management version 2
lspci -vnn:
lspci -vnn: 00:02.1 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller [10de:036d] (rev a2) (prog-if 20)
lspci -vnn: Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8239]
lspci -vnn: Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 66
lspci -vnn: Memory at fe02e000 (32-bit, non-prefetchable) [size=256]
lspci -vnn: Capabilities: [44] Debug port
lspci -vnn: Capabilities: [80] Power Management version 2
lspci -vnn:
lspci -vnn: 00:04.0 IDE interface [0101]: nVidia Corporation MCP55 IDE [10de:036e] (rev a1) (prog-if 8a [Master SecP PriP])
lspci -vnn: Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8239]
lspci -vnn: Flags: bus master, 66MHz, fast devsel, latency 0
lspci -vnn: I/O ports at f000 [size=16]
lspci -vnn: Capabilities: [44] Power Management version 2
lspci -vnn:
lspci -vnn: 00:05.0 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a2) (prog-if 85 [Master SecO PriO])
lspci -vnn: Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8239]
lspci -vnn: Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 233
lspci -vnn: I/O ports at 09f0 [size=8]
lspci -vnn: I/O ports at 0bf0 [size=4]
lspci -vnn: I/O ports at 0970 [size=8]
lspci -vnn: I/O ports at 0b70 [size=4]
lspci -vnn: I/O ports at dc00 [size=16]
lspci -vnn: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn: Capabilities: [44] Power Management version 2
lspci -vnn: Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
lspci -vnn: Capabilities: [cc] HyperTransport: MSI Mapping
lspci -vnn:
lspci -vnn: 00:05.1 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a2) (prog-if 85 [Master SecO PriO])
lspci -vnn: Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8239]
lspci -vnn: Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 50
lspci -vnn: I/O ports at 09e0 [size=8]
lspci -vnn: I/O ports at 0be0 [size=4]
lspci -vnn: I/O ports at 0960 [size=8]
lspci -vnn: I/O ports at 0b60 [size=4]
lspci -vnn: I/O ports at c800 [size=16]
lspci -vnn: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn: Capabilities: [44] Power Management version 2
lspci -vnn: Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
lspci -vnn: Capabilities: [cc] HyperTransport: MSI Mapping
lspci -vnn:
lspci -vnn: 00:05.2 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a2) (prog-if 85 [Master SecO PriO])
lspci -vnn: Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8239]
lspci -vnn: Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 58
lspci -vnn: I/O ports at c400 [size=8]
lspci -vnn: I/O ports at c000 [size=4]
lspci -vnn: I/O ports at bc00 [size=8]
lspci -vnn: I/O ports at b800 [size=4]
lspci -vnn: I/O ports at b400 [size=16]
lspci -vnn: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn: Capabilities: [44] Power Management version 2
lspci -vnn: Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
lspci -vnn: Capabilities: [cc] HyperTransport: MSI Mapping
lspci -vnn:
lspci -vnn: 00:06.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI bridge [10de:0370] (rev a2) (prog-if 01)
lspci -vnn: Flags: bus master, 66MHz, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
lspci -vnn: Capabilities: [b8] Subsystem: Gammagraphx, Inc. Unknown device [0000:0000]
lspci -vnn: Capabilities: [8c] HyperTransport: MSI Mapping
lspci -vnn:
lspci -vnn: 00:06.1 Audio device [0403]: nVidia Corporation MCP55 High Definition Audio [10de:0371] (rev a2)
lspci -vnn: Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81f6]
lspci -vnn: Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 10
lspci -vnn: Memory at fe024000 (32-bit, non-prefetchable) [size=16K]
lspci -vnn: Capabilities: [44] Power Management version 2
lspci -vnn: Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable-
lspci -vnn: Capabilities: [6c] HyperTransport: MSI Mapping
lspci -vnn:
lspci -vnn: 00:08.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet [10de:0373] (rev a2)
lspci -vnn: Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8239]
lspci -vnn: Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 50
lspci -vnn: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn: I/O ports at b000 [size=8]
lspci -vnn: Memory at fe029000 (32-bit, non-prefetchable) [size=256]
lspci -vnn: Memory at fe028000 (32-bit, non-prefetchable) [size=16]
lspci -vnn: Capabilities: [44] Power Management version 2
lspci -vnn: Capabilities: [70] MSI-X: Enable+ Mask- TabSize=8
lspci -vnn: Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/3 Enable-
lspci -vnn: Capabilities: [6c] HyperTransport: MSI Mapping
lspci -vnn:
lspci -vnn: 00:0a.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0376] (rev a2)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
lspci -vnn: Capabilities: [40] Subsystem: nVidia Corporation Unknown device [10de:0000]
lspci -vnn: Capabilities: [48] Power Management version 2
lspci -vnn: Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
lspci -vnn: Capabilities: [60] HyperTransport: MSI Mapping
lspci -vnn: Capabilities: [80] Express Root Port (Slot+) IRQ 0
lspci -vnn: Capabilities: [100] Virtual Channel
lspci -vnn:
lspci -vnn: 00:0b.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0374] (rev a2)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
lspci -vnn: Capabilities: [40] Subsystem: nVidia Corporation Unknown device [10de:0000]
lspci -vnn: Capabilities: [48] Power Management version 2
lspci -vnn: Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
lspci -vnn: Capabilities: [60] HyperTransport: MSI Mapping
lspci -vnn: Capabilities: [80] Express Root Port (Slot+) IRQ 0
lspci -vnn: Capabilities: [100] Virtual Channel
lspci -vnn:
lspci -vnn: 00:0c.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0374] (rev a2)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
lspci -vnn: Capabilities: [40] Subsystem: nVidia Corporation Unknown device [10de:0000]
lspci -vnn: Capabilities: [48] Power Management version 2
lspci -vnn: Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
lspci -vnn: Capabilities: [60] HyperTransport: MSI Mapping
lspci -vnn: Capabilities: [80] Express Root Port (Slot+) IRQ 0
lspci -vnn: Capabilities: [100] Virtual Channel
lspci -vnn:
lspci -vnn: 00:0d.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0378] (rev a2)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
lspci -vnn: Capabilities: [40] Subsystem: nVidia Corporation Unknown device [10de:0000]
lspci -vnn: Capabilities: [48] Power Management version 2
lspci -vnn: Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
lspci -vnn: Capabilities: [60] HyperTransport: MSI Mapping
lspci -vnn: Capabilities: [80] Express Root Port (Slot+) IRQ 0
lspci -vnn: Capabilities: [100] Virtual Channel
lspci -vnn:
lspci -vnn: 00:0e.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0375] (rev a2)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
lspci -vnn: Capabilities: [40] Subsystem: nVidia Corporation Unknown device [10de:0000]
lspci -vnn: Capabilities: [48] Power Management version 2
lspci -vnn: Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
lspci -vnn: Capabilities: [60] HyperTransport: MSI Mapping
lspci -vnn: Capabilities: [80] Express Root Port (Slot+) IRQ 0
lspci -vnn: Capabilities: [100] Virtual Channel
lspci -vnn:
lspci -vnn: 00:0f.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0377] (rev a2)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
lspci -vnn: I/O behind bridge: 0000a000-0000afff
lspci -vnn: Memory behind bridge: fde00000-fdefffff
lspci -vnn: Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
lspci -vnn: Capabilities: [40] Subsystem: nVidia Corporation Unknown device [10de:0000]
lspci -vnn: Capabilities: [48] Power Management version 2
lspci -vnn: Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
lspci -vnn: Capabilities: [60] HyperTransport: MSI Mapping
lspci -vnn: Capabilities: [80] Express Root Port (Slot+) IRQ 0
lspci -vnn: Capabilities: [100] Virtual Channel
lspci -vnn:
lspci -vnn: 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
lspci -vnn: Flags: fast devsel
lspci -vnn: Capabilities: [80] HyperTransport: Host or Secondary Interface
lspci -vnn:
lspci -vnn: 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
lspci -vnn: Flags: fast devsel
lspci -vnn:
lspci -vnn: 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
lspci -vnn: Flags: fast devsel
lspci -vnn:
lspci -vnn: 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
lspci -vnn: Flags: fast devsel
lspci -vnn: Capabilities: [f0] #0f [0010]
lspci -vnn:
lspci -vnn: 07:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV530 [Radeon X1600] [1002:71c2]
lspci -vnn: Subsystem: PC Partner Limited Unknown device [174b:0840]
lspci -vnn: Flags: bus master, fast devsel, latency 0, IRQ 11
lspci -vnn: Memory at e0000000 (64-bit, prefetchable) [size=256M]
lspci -vnn: Memory at fdef0000 (64-bit, non-prefetchable) [size=64K]
lspci -vnn: I/O ports at ac00 [size=256]
lspci -vnn: Expansion ROM at fdec0000 [disabled] [size=128K]
lspci -vnn: Capabilities: [50] Power Management version 2
lspci -vnn: Capabilities: [58] Express Endpoint IRQ 0
lspci -vnn: Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
lspci -vnn:
lspci -vnn: 07:00.1 Display controller [0380]: ATI Technologies Inc RV530 [Radeon X1600] (Secondary) [1002:71e2]
lspci -vnn: Subsystem: PC Partner Limited Unknown device [174b:0841]
lspci -vnn: Flags: fast devsel
lspci -vnn: Memory at fdee0000 (64-bit, non-prefetchable) [disabled] [size=64K]
lspci -vnn: Capabilities: [50] Power Management version 2
lspci -vnn: Capabilities: [58] Express Endpoint IRQ 0
lspci -vnn:
lsmod: Module Size Used by
lsmod: qnx4 17608 0
lsmod: ntfs 196104 0
lsmod: xfs 548936 0
lsmod: reiserfs 248320 0
lsmod: jfs 176336 0
lsmod: ext3 147600 5
lsmod: jbd 68648 1 ext3
lsmod: mbcache 14728 1 ext3
lsmod: vfat 18688 0
lsmod: fat 60720 1 vfat
lsmod: forcedeth 36492 0
lsmod: nls_iso8859_1 9728 0
lsmod: isofs 41956 0
lsmod: ide_disk 21760 0
lsmod: ide_generic 5632 0 [permanent]
lsmod: pdc202xx_new 14080 0 [permanent]
lsmod: aec62xx 13056 0 [permanent]
lsmod: alim15x3 16920 0 [permanent]
lsmod: atiixp 11280 0 [permanent]
lsmod: cmd64x 16076 0 [permanent]
lsmod: cs5520 9856 0 [permanent]
lsmod: cs5530 10496 0 [permanent]
lsmod: cy82c693 9608 0 [permanent]
lsmod: hpt34x 10368 0 [permanent]
lsmod: it821x 13828 0 [permanent]
lsmod: ns87415 9416 0 [permanent]
lsmod: opti621 9604 0 [permanent]
lsmod: pdc202xx_old 16128 0 [permanent]
lsmod: piix 15748 0 [permanent]
lsmod: rz1000 7424 0 [permanent]
lsmod: sc1200 12288 0 [permanent]
lsmod: serverworks 13968 0 [permanent]
lsmod: siimage 17536 0 [permanent]
lsmod: sis5513 18832 0 [permanent]
lsmod: slc90e66 10496 0 [permanent]
lsmod: triflex 8960 0 [permanent]
lsmod: trm290 9348 0 [permanent]
lsmod: via82cxxx 13828 0 [permanent]
lsmod: floppy 72424 0
lsmod: usb_storage 91328 0
lsmod: vga16fb 17424 2
lsmod: vgastate 12672 1 vga16fb
lsmod: usbserial 40560 0
lsmod: usbkbd 12288 0
lsmod: thermal 20624 0
lsmod: processor 36584 1 thermal
lsmod: fan 9736 0
lsmod: ide_cd 47136 0
lsmod: cdrom 41768 1 ide_cd
lsmod: sd_mod 26240 7
lsmod: amd74xx 19504 0 [permanent]
lsmod: generic 9860 0 [permanent]
lsmod: ide_core 157056 29 ide_disk,ide_generic,pdc202xx_new,aec62xx,alim15x3,atiixp,cmd64x,cs5520,cs5530,cy82c693,hpt34x,it821x,ns87415,opti621,pdc202xx_old,piix,rz1000,sc1200,serverworks,siimage,sis5513,slc90e66,triflex,trm290,via82cxxx,usb_storage,ide_cd,amd74xx,generic
lsmod: ohci_hcd 25988 0
lsmod: ehci_hcd 38280 0
lsmod: sata_nv 15492 6
lsmod: libata 80792 1 sata_nv
lsmod: scsi_mod 162224 3 usb_storage,sd_mod,libata
lsmod: parport_pc 43048 0
lsmod: parport 47372 1 parport_pc
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 513368 428 512940 0% /dev
df: tmpfs 513368 428 512940 0% /dev
df: tmpfs 513368 428 512940 0% /.dev
df: /dev/scsi/host0/bus0/target0/lun0/part1 264445 131684 119108 53% /target
df: /dev/scsi/host0/bus0/target0/lun0/part9 184710260 191968 175135532 0% /target/home
df: /dev/scsi/host0/bus0/target0/lun0/part8 381138 10291 351169 3% /target/tmp
df: /dev/scsi/host0/bus0/target0/lun0/part5 4806904 544900 4017820 12% /target/usr
df: /dev/scsi/host0/bus0/target0/lun0/part6 2885780 276268 2462924 10% /target/var
free: total used free shared buffers
free: Mem: 1026736 870588 156148 0 48800
free: Swap: 3004112 324 3003788
free: Total: 4030848 870912 3159936
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 30: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 31: cardctl: not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : AuthenticAMD
/proc/cpuinfo: cpu family : 15
/proc/cpuinfo: model : 79
/proc/cpuinfo: model name : AMD Athlon(tm) 64 Processor 3500+
/proc/cpuinfo: stepping : 2
/proc/cpuinfo: cpu MHz : 2210.211
/proc/cpuinfo: cache size : 512 KB
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 1
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow up pni cx16 lahf_lm svm cr8_legacy
/proc/cpuinfo: bogomips : 4423.98
/proc/cpuinfo: TLB size : 1024 4K pages
/proc/cpuinfo: clflush size : 64
/proc/cpuinfo: cache_alignment : 64
/proc/cpuinfo: address sizes : 40 bits physical, 48 bits virtual
/proc/cpuinfo: power management: ts fid vid ttp tm stc
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0070-0077 : rtc
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 01f0-01f7 : ide0
/proc/ioports: 0378-037a : parport0
/proc/ioports: 037b-037f : parport0
/proc/ioports: 03c0-03df : vga+
/proc/ioports: 03f6-03f6 : ide0
/proc/ioports: 03f8-03ff : serial
/proc/ioports: 0960-0967 : 0000:00:05.1
/proc/ioports: 0960-0967 : sata_nv
/proc/ioports: 0970-0977 : 0000:00:05.0
/proc/ioports: 0970-0977 : sata_nv
/proc/ioports: 09e0-09e7 : 0000:00:05.1
/proc/ioports: 09e0-09e7 : sata_nv
/proc/ioports: 09f0-09f7 : 0000:00:05.0
/proc/ioports: 09f0-09f7 : sata_nv
/proc/ioports: 0b60-0b63 : 0000:00:05.1
/proc/ioports: 0b60-0b63 : sata_nv
/proc/ioports: 0b70-0b73 : 0000:00:05.0
/proc/ioports: 0b70-0b73 : sata_nv
/proc/ioports: 0be0-0be3 : 0000:00:05.1
/proc/ioports: 0be0-0be3 : sata_nv
/proc/ioports: 0bf0-0bf3 : 0000:00:05.0
/proc/ioports: 0bf0-0bf3 : sata_nv
/proc/ioports: 1000-107f : motherboard
/proc/ioports: 1000-1003 : PM1a_EVT_BLK
/proc/ioports: 1004-1005 : PM1a_CNT_BLK
/proc/ioports: 1008-100b : PM_TMR
/proc/ioports: 101c-101c : PM2_CNT_BLK
/proc/ioports: 1020-1027 : GPE0_BLK
/proc/ioports: 1080-10ff : motherboard
/proc/ioports: 1080-10ff : pnp 00:01
/proc/ioports: 1400-147f : motherboard
/proc/ioports: 1400-147f : pnp 00:01
/proc/ioports: 1480-14ff : motherboard
/proc/ioports: 14a0-14af : GPE1_BLK
/proc/ioports: 1800-187f : motherboard
/proc/ioports: 1800-187f : pnp 00:01
/proc/ioports: 1880-18ff : motherboard
/proc/ioports: 1880-18ff : pnp 00:01
/proc/ioports: 1c00-1c3f : 0000:00:01.1
/proc/ioports: 1c40-1c7f : 0000:00:01.1
/proc/ioports: a000-afff : PCI Bus #07
/proc/ioports: ac00-acff : 0000:07:00.0
/proc/ioports: b000-b007 : 0000:00:08.0
/proc/ioports: b000-b007 : forcedeth
/proc/ioports: b400-b40f : 0000:00:05.2
/proc/ioports: b400-b40f : sata_nv
/proc/ioports: b800-b803 : 0000:00:05.2
/proc/ioports: b800-b803 : sata_nv
/proc/ioports: bc00-bc07 : 0000:00:05.2
/proc/ioports: bc00-bc07 : sata_nv
/proc/ioports: c000-c003 : 0000:00:05.2
/proc/ioports: c000-c003 : sata_nv
/proc/ioports: c400-c407 : 0000:00:05.2
/proc/ioports: c400-c407 : sata_nv
/proc/ioports: c800-c80f : 0000:00:05.1
/proc/ioports: c800-c80f : sata_nv
/proc/ioports: dc00-dc0f : 0000:00:05.0
/proc/ioports: dc00-dc0f : sata_nv
/proc/ioports: f000-f00f : 0000:00:04.0
/proc/ioports: f000-f007 : ide0
/proc/ioports: fc00-fc3f : 0000:00:01.1
/proc/iomem: 00000000-0009f7ff : System RAM
/proc/iomem: 00000000-00000000 : Crash kernel
/proc/iomem: 0009f800-0009ffff : reserved
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000cf3ff : Video ROM
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-3fedffff : System RAM
/proc/iomem: 00200000-003d4235 : Kernel code
/proc/iomem: 003d4236-004a48a7 : Kernel data
/proc/iomem: 3fee0000-3fee2fff : ACPI Non-volatile Storage
/proc/iomem: 3fee3000-3feeffff : ACPI Tables
/proc/iomem: 3fef0000-3fefffff : reserved
/proc/iomem: e0000000-efffffff : PCI Bus #07
/proc/iomem: e0000000-efffffff : 0000:07:00.0
/proc/iomem: f0000000-f3ffffff : reserved
/proc/iomem: fde00000-fdefffff : PCI Bus #07
/proc/iomem: fdec0000-fdedffff : 0000:07:00.0
/proc/iomem: fdee0000-fdeeffff : 0000:07:00.1
/proc/iomem: fdef0000-fdefffff : 0000:07:00.0
/proc/iomem: fe024000-fe027fff : 0000:00:06.1
/proc/iomem: fe028000-fe02800f : 0000:00:08.0
/proc/iomem: fe028000-fe02800f : forcedeth
/proc/iomem: fe029000-fe0290ff : 0000:00:08.0
/proc/iomem: fe029000-fe0290ff : forcedeth
/proc/iomem: fe02a000-fe02afff : 0000:00:08.0
/proc/iomem: fe02a000-fe02afff : forcedeth
/proc/iomem: fe02b000-fe02bfff : 0000:00:05.2
/proc/iomem: fe02b000-fe02bfff : sata_nv
/proc/iomem: fe02c000-fe02cfff : 0000:00:05.1
/proc/iomem: fe02c000-fe02cfff : sata_nv
/proc/iomem: fe02d000-fe02dfff : 0000:00:05.0
/proc/iomem: fe02d000-fe02dfff : sata_nv
/proc/iomem: fe02e000-fe02e0ff : 0000:00:02.1
/proc/iomem: fe02e000-fe02e0ff : ehci_hcd
/proc/iomem: fe02f000-fe02ffff : 0000:00:02.0
/proc/iomem: fe02f000-fe02ffff : ohci_hcd
/proc/iomem: fec00000-ffffffff : reserved
/proc/interrupts: CPU0
/proc/interrupts: 0: 209405 IO-APIC-edge timer
/proc/interrupts: 1: 491 IO-APIC-edge i8042
/proc/interrupts: 7: 1 IO-APIC-edge parport0
/proc/interrupts: 8: 0 IO-APIC-edge rtc
/proc/interrupts: 9: 0 IO-APIC-level acpi
/proc/interrupts: 14: 1633 IO-APIC-edge ide0
/proc/interrupts: 50: 0 IO-APIC-level libata
/proc/interrupts: 58: 0 IO-APIC-level libata
/proc/interrupts: 66: 0 IO-APIC-level ehci_hcd:usb1
/proc/interrupts: 74: 63170 PCI-MSI-X eth0
/proc/interrupts: 82: 31971 PCI-MSI-X eth0
/proc/interrupts: 90: 77064 PCI-MSI-X eth0
/proc/interrupts: 233: 86147 IO-APIC-level libata, ohci_hcd:usb2
/proc/interrupts: NMI: 243
/proc/interrupts: LOC: 209378
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 1026736 kB
/proc/meminfo: MemFree: 156148 kB
/proc/meminfo: Buffers: 48800 kB
/proc/meminfo: Cached: 674772 kB
/proc/meminfo: SwapCached: 8 kB
/proc/meminfo: Active: 343056 kB
/proc/meminfo: Inactive: 408344 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 1026736 kB
/proc/meminfo: LowFree: 156148 kB
/proc/meminfo: SwapTotal: 3004112 kB
/proc/meminfo: SwapFree: 3003788 kB
/proc/meminfo: Dirty: 2728 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: Mapped: 21208 kB
/proc/meminfo: Slab: 102116 kB
/proc/meminfo: CommitLimit: 3517480 kB
/proc/meminfo: Committed_AS: 24012 kB
/proc/meminfo: PageTables: 388 kB
/proc/meminfo: VmallocTotal: 34359738367 kB
/proc/meminfo: VmallocUsed: 269816 kB
/proc/meminfo: VmallocChunk: 34359468455 kB
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
/proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=402000000 3802078f840d001 f2ffffdfffefffff fffffffffffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
dmidecode: # dmidecode 2.8
dmidecode: SMBIOS 2.3 present.
dmidecode: 75 structures occupying 2168 bytes.
dmidecode: Table at 0x000F0000.
dmidecode:
dmidecode: Handle 0x0000, DMI type 0, 20 bytes
dmidecode: BIOS Information
dmidecode: Vendor: Phoenix Technologies, LTD
dmidecode: Version: ASUS M2N-E ACPI BIOS Revision 0304
dmidecode: Release Date: 08/18/2006
dmidecode: Address: 0xE0000
dmidecode: Runtime Size: 128 kB
dmidecode: ROM Size: 512 kB
dmidecode: Characteristics:
dmidecode: PCI is supported
dmidecode: PNP is supported
dmidecode: APM is supported
dmidecode: BIOS is upgradeable
dmidecode: BIOS shadowing is allowed
dmidecode: Boot from CD is supported
dmidecode: Selectable boot is supported
dmidecode: BIOS ROM is socketed
dmidecode: EDD is supported
dmidecode: 5.25"/360 KB floppy services are supported (int 13h)
dmidecode: 5.25"/1.2 MB floppy services are supported (int 13h)
dmidecode: 3.5"/720 KB floppy services are supported (int 13h)
dmidecode: 3.5"/2.88 MB floppy services are supported (int 13h)
dmidecode: Print screen service is supported (int 5h)
dmidecode: 8042 keyboard services are supported (int 9h)
dmidecode: Serial services are supported (int 14h)
dmidecode: Printer services are supported (int 17h)
dmidecode: CGA/mono video services are supported (int 10h)
dmidecode: ACPI is supported
dmidecode: USB legacy is supported
dmidecode: LS-120 boot is supported
dmidecode: ATAPI Zip drive boot is supported
dmidecode: BIOS boot specification is supported
dmidecode:
dmidecode: Handle 0x0001, DMI type 1, 25 bytes
dmidecode: System Information
dmidecode: Manufacturer: System manufacturer
dmidecode: Product Name: System Product Name
dmidecode: Version: System Version
dmidecode: Serial Number: System Serial Number
dmidecode: UUID: 4044999E-9C7A-DA11-88D7-0017316C6FAF
dmidecode: Wake-up Type: Power Switch
dmidecode:
dmidecode: Handle 0x0002, DMI type 2, 8 bytes
dmidecode: Base Board Information
dmidecode: Manufacturer: ASUSTeK Computer INC.
dmidecode: Product Name: M2N-E
dmidecode: Version: 1.XX
dmidecode: Serial Number: 123456789000
dmidecode:
dmidecode: Handle 0x0003, DMI type 3, 17 bytes
dmidecode: Chassis Information
dmidecode: Manufacturer: Chassis Manufacture
dmidecode: Type: Desktop
dmidecode: Lock: Not Present
dmidecode: Version: Chassis Version
dmidecode: Serial Number: EVAL
dmidecode: Asset Tag: 123456789000
dmidecode: Boot-up State: Safe
dmidecode: Power Supply State: Safe
dmidecode: Thermal State: Safe
dmidecode: Security Status: None
dmidecode: OEM Information: 0x00000001
dmidecode:
dmidecode: Handle 0x0004, DMI type 4, 35 bytes
dmidecode: Processor Information
dmidecode: Socket Designation: Socket AM2
dmidecode: Type: Central Processor
dmidecode: Family: Athlon 64
dmidecode: Manufacturer: AMD
dmidecode: ID: F2 0F 04 00 FF FB 8B 07
dmidecode: Signature: Extended Family 0, Extended Model 4, Stepping 2
dmidecode: Flags:
dmidecode: FPU (Floating-point unit on-chip)
dmidecode: VME (Virtual mode extension)
dmidecode: DE (Debugging extension)
dmidecode: PSE (Page size extension)
dmidecode: TSC (Time stamp counter)
dmidecode: MSR (Model specific registers)
dmidecode: PAE (Physical address extension)
dmidecode: MCE (Machine check exception)
dmidecode: CX8 (CMPXCHG8 instruction supported)
dmidecode: APIC (On-chip APIC hardware supported)
dmidecode: SEP (Fast system call)
dmidecode: MTRR (Memory type range registers)
dmidecode: PGE (Page global enable)
dmidecode: MCA (Machine check architecture)
dmidecode: CMOV (Conditional move instruction supported)
dmidecode: PAT (Page attribute table)
dmidecode: PSE-36 (36-bit page size extension)
dmidecode: CLFSH (CLFLUSH instruction supported)
dmidecode: MMX (MMX technology supported)
dmidecode: FXSR (Fast floating-point save and restore)
dmidecode: SSE (Streaming SIMD extensions)
dmidecode: SSE2 (Streaming SIMD extensions 2)
dmidecode: Version: AMD Athlon(tm) 64 Processor 3500+
dmidecode: Voltage: 1.3 V
dmidecode: External Clock: 200 MHz
dmidecode: Max Speed: 3700 MHz
dmidecode: Current Speed: 2200 MHz
dmidecode: Status: Populated, Enabled
dmidecode: Upgrade: Socket 940
dmidecode: L1 Cache Handle: 0x000B
dmidecode: L2 Cache Handle: 0x000D
dmidecode: L3 Cache Handle: Not Provided
dmidecode: Serial Number:
dmidecode: Asset Tag:
dmidecode: Part Number:
dmidecode:
dmidecode: Handle 0x0005, DMI type 4, 35 bytes
dmidecode: Processor Information
dmidecode: Socket Designation: Socket AM2
dmidecode: Type: Unknown
dmidecode: Family: Unknown
dmidecode: Manufacturer: Null
dmidecode: ID: 00 00 00 00 00 00 00 00
dmidecode: Version: Null
dmidecode: Voltage: 0.0 V
dmidecode: External Clock: Unknown
dmidecode: Max Speed: Unknown
dmidecode: Current Speed: Unknown
dmidecode: Status: Populated, Disabled By BIOS
dmidecode: Upgrade: Socket 940
dmidecode: L1 Cache Handle: Not Provided
dmidecode: L2 Cache Handle: Not Provided
dmidecode: L3 Cache Handle: Not Provided
dmidecode: Serial Number:
dmidecode: Asset Tag:
dmidecode: Part Number:
dmidecode:
dmidecode: Handle 0x0006, DMI type 5, 24 bytes
dmidecode: Memory Controller Information
dmidecode: Error Detecting Method: 64-bit ECC
dmidecode: Error Correcting Capabilities:
dmidecode: None
dmidecode: Supported Interleave: One-way Interleave
dmidecode: Current Interleave: One-way Interleave
dmidecode: Maximum Memory Module Size: 1024 MB
dmidecode: Maximum Total Memory Size: 4096 MB
dmidecode: Supported Speeds:
dmidecode: 70 ns
dmidecode: 60 ns
dmidecode: 50 ns
dmidecode: Supported Memory Types:
dmidecode: Standard
dmidecode: SDRAM
dmidecode: Memory Module Voltage: 2.9 V
dmidecode: Associated Memory Slots: 4
dmidecode: 0x0007
dmidecode: 0x0008
dmidecode: 0x0009
dmidecode: 0x000A
dmidecode: Enabled Error Correcting Capabilities: None
dmidecode:
dmidecode: Handle 0x0007, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: DIMM_B1
dmidecode: Bank Connections: None
dmidecode: Current Speed: Unknown
dmidecode: Type: Unknown
dmidecode: Installed Size: Not Installed
dmidecode: Enabled Size: Not Installed
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x0008, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: DIMM_B2
dmidecode: Bank Connections: None
dmidecode: Current Speed: Unknown
dmidecode: Type: Unknown
dmidecode: Installed Size: Not Installed
dmidecode: Enabled Size: Not Installed
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x0009, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: DIMM_A1
dmidecode: Bank Connections: None
dmidecode: Current Speed: Unknown
dmidecode: Type: Unknown
dmidecode: Installed Size: Not Installed
dmidecode: Enabled Size: Not Installed
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x000A, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: Socket Designation: DIMM_A2
dmidecode: Bank Connections: 4 5
dmidecode: Current Speed: 6 ns
dmidecode: Type: Unknown EDO
dmidecode: Installed Size: 1024 MB (Double-bank Connection)
dmidecode: Enabled Size: 1024 MB (Double-bank Connection)
dmidecode: Error Status: OK
dmidecode:
dmidecode: Handle 0x000B, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: L1 Cache
dmidecode: Configuration: Enabled, Not Socketed, Level 1
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 128 KB
dmidecode: Maximum Size: 128 KB
dmidecode: Supported SRAM Types:
dmidecode: Synchronous
dmidecode: Installed SRAM Type: Synchronous
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Single-bit ECC
dmidecode: System Type: Data
dmidecode: Associativity: 4-way Set-associative
dmidecode:
dmidecode: Handle 0x000C, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: L1 Cache
dmidecode: Configuration: Disabled, Not Socketed, Level 1
dmidecode: Operational Mode: Unknown
dmidecode: Location: Internal
dmidecode: Installed Size: 0 KB
dmidecode: Maximum Size: 0 KB
dmidecode: Supported SRAM Types:
dmidecode: Synchronous
dmidecode: Installed SRAM Type: Synchronous
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Single-bit ECC
dmidecode: System Type: Data
dmidecode: Associativity: 4-way Set-associative
dmidecode:
dmidecode: Handle 0x000D, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: L2 Cache
dmidecode: Configuration: Enabled, Not Socketed, Level 2
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 512 KB
dmidecode: Maximum Size: 512 KB
dmidecode: Supported SRAM Types:
dmidecode: Synchronous
dmidecode: Installed SRAM Type: Synchronous
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Single-bit ECC
dmidecode: System Type: Unified
dmidecode: Associativity: 4-way Set-associative
dmidecode:
dmidecode: Handle 0x000E, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: L2 Cache
dmidecode: Configuration: Disabled, Not Socketed, Level 2
dmidecode: Operational Mode: Unknown
dmidecode: Location: Internal
dmidecode: Installed Size: 0 KB
dmidecode: Maximum Size: 0 KB
dmidecode: Supported SRAM Types:
dmidecode: Synchronous
dmidecode: Installed SRAM Type: Synchronous
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Single-bit ECC
dmidecode: System Type: Unified
dmidecode: Associativity: 4-way Set-associative
dmidecode:
dmidecode: Handle 0x000F, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: PRI_IDE
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0010, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: FLOPPY
dmidecode: Internal Connector Type: On Board Floppy
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: 8251 FIFO Compatible
dmidecode:
dmidecode: Handle 0x0011, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: COM1
dmidecode: Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
dmidecode: External Reference Designator:
dmidecode: External Connector Type: DB-9 male
dmidecode: Port Type: Serial Port 16450 Compatible
dmidecode:
dmidecode: Handle 0x0012, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: LPT1
dmidecode: Internal Connector Type: DB-25 female
dmidecode: External Reference Designator:
dmidecode: External Connector Type: DB-25 female
dmidecode: Port Type: Parallel Port ECP/EPP
dmidecode:
dmidecode: Handle 0x0013, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: PS/2 Keyboard
dmidecode: Internal Connector Type: PS/2
dmidecode: External Reference Designator:
dmidecode: External Connector Type: PS/2
dmidecode: Port Type: Keyboard Port
dmidecode:
dmidecode: Handle 0x0014, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: PS/2 Mouse
dmidecode: Internal Connector Type: PS/2
dmidecode: External Reference Designator:
dmidecode: External Connector Type: PS/2
dmidecode: Port Type: Mouse Port
dmidecode:
dmidecode: Handle 0x0015, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB1
dmidecode: External Connector Type: Other
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0016, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB2
dmidecode: External Connector Type: Other
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0017, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB3
dmidecode: External Connector Type: Other
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0018, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB4
dmidecode: External Connector Type: Other
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x0019, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB5
dmidecode: External Connector Type: Other
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x001A, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB6
dmidecode: External Connector Type: Other
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x001B, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB7
dmidecode: External Connector Type: Other
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x001C, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB8
dmidecode: External Connector Type: Other
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x001D, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB9
dmidecode: External Connector Type: Other
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x001E, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: USB10
dmidecode: External Connector Type: Other
dmidecode: Port Type: USB
dmidecode:
dmidecode: Handle 0x001F, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: LINE_IN
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: LINE_IN
dmidecode: External Connector Type: None
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0020, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: LINE_OUT
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: LINE_OUT
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0021, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: MIC_IN
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: MIC_IN
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0022, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Back Surround L/R
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Back Surround L/R
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0023, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Side Surround L/R
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Side Surround L/R
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0024, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Center/LFE
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Center/LFE
dmidecode: External Connector Type: Mini Jack (headphones)
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0025, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: CD_IN
dmidecode: Internal Connector Type: On Board Sound Input From CD-ROM
dmidecode: External Reference Designator: CD_IN
dmidecode: External Connector Type: None
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0026, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: SPDIF_OUT
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: SPDIF_OUT
dmidecode: External Connector Type: None
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0027, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: FP_AUDIO
dmidecode: Internal Connector Type: Other
dmidecode: External Reference Designator: FP_AUDIO
dmidecode: External Connector Type: None
dmidecode: Port Type: Audio Port
dmidecode:
dmidecode: Handle 0x0028, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: Not Specified
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: LAN_1
dmidecode: External Connector Type: RJ-45
dmidecode: Port Type: Network Port
dmidecode:
dmidecode: Handle 0x0029, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: SATA1
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x002A, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: SATA2
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x002B, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: SATA3
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x002C, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: SATA4
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x002D, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: SATA5
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x002E, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: SATA6
dmidecode: Internal Connector Type: On Board IDE
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x002F, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: CHASSIS
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: Other
dmidecode:
dmidecode: Handle 0x0030, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: CPU_FAN1
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: None
dmidecode:
dmidecode: Handle 0x0031, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: SB_FAN1
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: None
dmidecode:
dmidecode: Handle 0x0032, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: PWR_FAN1
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: None
dmidecode:
dmidecode: Handle 0x0033, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: CHA_FAN1
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: None
dmidecode:
dmidecode: Handle 0x0034, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: CHA_FAN2
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: None
dmidecode:
dmidecode: Handle 0x0035, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: CHA_FAN3
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: None
dmidecode:
dmidecode: Handle 0x0036, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: Internal Reference Designator: CHA_FAN4
dmidecode: Internal Connector Type: None
dmidecode: External Reference Designator: Not Specified
dmidecode: External Connector Type: None
dmidecode: Port Type: None
dmidecode:
dmidecode: Handle 0x0037, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI1
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Short
dmidecode: ID: 1
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0038, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI2
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Short
dmidecode: ID: 2
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0039, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCI3
dmidecode: Type: 32-bit PCI
dmidecode: Current Usage: Available
dmidecode: Length: Short
dmidecode: ID: 3
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x003A, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCIEX16_1
dmidecode: Type: x16 PCI Express
dmidecode: Current Usage: In Use
dmidecode: Length: Short
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x003B, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCIEX4_1
dmidecode: Type: x4 PCI Express
dmidecode: Current Usage: Available
dmidecode: Length: Short
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x003C, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCIEX1_1
dmidecode: Type: x1 PCI Express
dmidecode: Current Usage: Available
dmidecode: Length: Short
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x003D, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PCIEX1_2
dmidecode: Type: x1 PCI Express
dmidecode: Current Usage: Available
dmidecode: Length: Short
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x003E, DMI type 13, 22 bytes
dmidecode: BIOS Language Information
dmidecode: Installable Languages: 3
dmidecode: n|US|iso8859-1
dmidecode: n|US|iso8859-1
dmidecode: r|CA|iso8859-1
dmidecode: Currently Installed Language: n|US|iso8859-1
dmidecode:
dmidecode: Handle 0x003F, DMI type 16, 15 bytes
dmidecode: Physical Memory Array
dmidecode: Location: System Board Or Motherboard
dmidecode: Use: System Memory
dmidecode: Error Correction Type: None
dmidecode: Maximum Capacity: 4 GB
dmidecode: Error Information Handle: Not Provided
dmidecode: Number Of Devices: 4
dmidecode:
dmidecode: Handle 0x0040, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x003F
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 64 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: No Module Installed
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: DIMM_B1
dmidecode: Bank Locator: Bank0/1
dmidecode: Type: Unknown
dmidecode: Type Detail: None
dmidecode: Speed: Unknown
dmidecode: Manufacturer: None
dmidecode: Serial Number: None
dmidecode: Asset Tag: None
dmidecode: Part Number: None
dmidecode:
dmidecode: Handle 0x0041, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x003F
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 64 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: No Module Installed
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: DIMM_B2
dmidecode: Bank Locator: Bank2/3
dmidecode: Type: Unknown
dmidecode: Type Detail: None
dmidecode: Speed: Unknown
dmidecode: Manufacturer: None
dmidecode: Serial Number: None
dmidecode: Asset Tag: None
dmidecode: Part Number: None
dmidecode:
dmidecode: Handle 0x0042, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x003F
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 64 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: No Module Installed
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: DIMM_A1
dmidecode: Bank Locator: Bank4/5
dmidecode: Type: Unknown
dmidecode: Type Detail: None
dmidecode: Speed: Unknown
dmidecode: Manufacturer: None
dmidecode: Serial Number: None
dmidecode: Asset Tag: None
dmidecode: Part Number: None
dmidecode:
dmidecode: Handle 0x0043, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x003F
dmidecode: Error Information Handle: Not Provided
dmidecode: Total Width: 64 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: 1024 MB
dmidecode: Form Factor: DIMM
dmidecode: Set: None
dmidecode: Locator: DIMM_A2
dmidecode: Bank Locator: Bank6/7
dmidecode: Type: Unknown
dmidecode: Type Detail: None
dmidecode: Speed: 667 MHz (1.5 ns)
dmidecode: Manufacturer: None
dmidecode: Serial Number: None
dmidecode: Asset Tag: None
dmidecode: Part Number: None
dmidecode:
dmidecode: Handle 0x0044, DMI type 19, 15 bytes
dmidecode: Memory Array Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0003FFFFFFF
dmidecode: Range Size: 1 GB
dmidecode: Physical Array Handle: 0x003F
dmidecode: Partition Width: 0
dmidecode:
dmidecode: Handle 0x0045, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x000000003FF
dmidecode: Range Size: 1 kB
dmidecode: Physical Device Handle: 0x0040
dmidecode: Memory Array Mapped Address Handle: 0x0044
dmidecode: Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x0046, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x000000003FF
dmidecode: Range Size: 1 kB
dmidecode: Physical Device Handle: 0x0041
dmidecode: Memory Array Mapped Address Handle: 0x0044
dmidecode: Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x0047, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x000000003FF
dmidecode: Range Size: 1 kB
dmidecode: Physical Device Handle: 0x0042
dmidecode: Memory Array Mapped Address Handle: 0x0044
dmidecode: Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x0048, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0003FFFFFFF
dmidecode: Range Size: 1 GB
dmidecode: Physical Device Handle: 0x0043
dmidecode: Memory Array Mapped Address Handle: 0x0044
dmidecode: Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x0049, DMI type 32, 11 bytes
dmidecode: System Boot Information
dmidecode: Status: No errors detected
dmidecode:
dmidecode: Handle 0x004A, DMI type 127, 4 bytes
dmidecode: End Of Table
dmidecode:
==============================================
Installer status:
==============================================
Package: preseed-common
Status: install ok unpacked
Version: 1.20
Depends: cdebconf-udeb, di-utils (>= 1.14)
Description: common files for preseeding
Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone
Package: localechooser
Status: install ok installed
Version: 1.29
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6.ds1-7
Description: GNU C Library: NSS helper for DNS - udeb
Package: cdrom-checker
Status: install ok unpacked
Version: 1.09
Depends: cdrom-detect, cdebconf-udeb (>= 0.31)
Description: Verify the cd contents
Installer-Menu-Item: 940
Package: usb-storage-modules-2.6.17-2-amd64-di
Status: install ok unpacked
Version: 1.14
Provides: usb-storage-modules
Depends: ide-core-modules-2.6.17-2-amd64-di, scsi-core-modules-2.6.17-2-amd64-di, usb-modules-2.6.17-2-amd64-di
Description: USB storage support
Package: lowmemcheck
Status: install ok unpacked
Version: 1.21
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode
Package: cdrom-retriever
Status: install ok installed
Version: 1.12
Provides: retriever
Depends: cdebconf-udeb, cdrom-detect
Description: Fetch modules from a CDROM
Package: main-menu
Status: install ok unpacked
Version: 1.15
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: Debian installer main menu
Package: di-utils-shell
Status: install ok unpacked
Version: 1.39
Depends: cdebconf-udeb, di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950
Package: di-utils
Status: install ok installed
Version: 1.39
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: Miscellaneous utilities for the debian installer
Package: ide-modules-2.6.17-2-amd64-di
Status: install ok unpacked
Version: 1.14
Provides: ide-modules
Depends: kernel-image-2.6.17-2-amd64-di, ide-core-modules-2.6.17-2-amd64-di
Description: IDE drivers
Package: scsi-modules-2.6.17-2-amd64-di
Status: install ok unpacked
Version: 1.14
Provides: scsi-modules
Depends: kernel-image-2.6.17-2-amd64-di, scsi-core-modules-2.6.17-2-amd64-di, scsi-common-modules-2.6.17-2-amd64-di, parport-modules-2.6.17-2-amd64-di, cdrom-core-modules-2.6.17-2-amd64-di, firmware-modules-2.6.17-2-amd64-di
Description: SCSI drivers
Package: sata-modules-2.6.17-2-amd64-di
Status: install ok unpacked
Version: 1.14
Provides: sata-modules
Depends: kernel-image-2.6.17-2-amd64-di, scsi-core-modules-2.6.17-2-amd64-di
Description: SATA drivers
Package: fat-modules-2.6.17-2-amd64-di
Status: install ok unpacked
Version: 1.14
Provides: fat-modules
Depends: kernel-image-2.6.17-2-amd64-di
Description: FAT filesystem support
Package: firmware-modules-2.6.17-2-amd64-di
Status: install ok unpacked
Version: 1.14
Provides: firmware-modules
Depends: kernel-image-2.6.17-2-amd64-di
Description: Firmware request modules
Package: acpi-modules-2.6.17-2-amd64-di
Status: install ok unpacked
Version: 1.14
Provides: acpi-modules
Depends: kernel-image-2.6.17-2-amd64-di
Description: ACPI support modules
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.108
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.5-1), libnewt0.52
Description: Newt frontend for Debian Configuration Management System
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.2.2-3
Depends: libc6 (>= 2.3.5-1)
Description: tools for managing Linux kernel modules
Package: rootskel
Status: install ok installed
Version: 1.41
Depends: di-utils (>= 1.24), cdebconf-udeb
Description: Skeleton root filesystem used by debian-installer
Package: udev-udeb
Status: install ok unpacked
Version: 0.100-2.2
Depends: libc6 (>= 2.3.5-1)
Description: /dev/ and hotplug management daemon
Package: fb-modules-2.6.17-2-amd64-di
Status: install ok unpacked
Version: 1.14
Provides: fb-modules
Depends: kernel-image-2.6.17-2-amd64-di
Description: Frame buffer support
Package: brltty-udeb
Status: install ok unpacked
Version: 3.7.2-4
Depends: libc6 (>= 2.3.5-1)
Description: Access software for a blind person using a soft braille terminal
Package: cdrom-core-modules-2.6.17-2-amd64-di
Status: install ok unpacked
Version: 1.14
Provides: cdrom-core-modules
Depends: kernel-image-2.6.17-2-amd64-di, scsi-core-modules-2.6.17-2-amd64-di, ide-modules-2.6.17-2-amd64-di
Description: CDROM support
Package: firewire-core-modules-2.6.17-2-amd64-di
Status: install ok unpacked
Version: 1.14
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.17-2-amd64-di, kernel-image-2.6.17-2-amd64-di
Description: Core FireWire drivers
Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-4
Depends: libc6 (>= 2.3.5-1)
Description: Free Implementation of the Unicode BiDi algorithm
Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.5-1)
Description: text-wrapping library with i18n - runtime udeb
Package: floppy-modules-2.6.17-2-amd64-di
Status: install ok unpacked
Version: 1.14
Provides: floppy-modules
Depends: kernel-image-2.6.17-2-amd64-di
Description: Floppy driver
Package: pcmcia-modules-2.6.17-2-amd64-di
Status: install ok unpacked
Version: 1.14
Provides: pcmcia-modules
Depends: kernel-image-2.6.17-2-amd64-di, firmware-modules-2.6.17-2-amd64-di
Description: Common PCMCIA drivers
Package: auto-install
Status: install ok unpacked
Version: 0.02
Depends: netcfg, preseed-common (>= 1.18)
Description: Support for automatic installs
Installer-Menu-Item: 19
Package: kernel-image-2.6.17-2-amd64-di
Status: install ok unpacked
Version: 1.14
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer
Package: usb-discover
Status: install ok unpacked
Version: 1.06
Depends: cdebconf-udeb
Description: Discover USB and load kernel modules
Package: parport-modules-2.6.17-2-amd64-di
Status: install ok unpacked
Version: 1.14
Provides: parport-modules
Depends: kernel-image-2.6.17-2-amd64-di
Description: Parallel port support
Package: rescue-check
Status: install ok unpacked
Version: 1.7
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested
Package: nano-udeb
Status: install ok unpacked
Version: 1.9.99pre3-1
Provides: editor
Depends: libc6 (>= 2.3.5-1), libslang2-udeb (>= 2.0.6-3)
Description: free Pico clone with some new features - tiny build
Package: input-modules-2.6.17-2-amd64-di
Status: install ok unpacked
Version: 1.14
Provides: input-modules
Depends: kernel-image-2.6.17-2-amd64-di, usb-modules-2.6.17-2-amd64-di
Description: Input devices support
Package: cdebconf-udeb
Status: install ok installed
Version: 0.108
Provides: debconf-2.0
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.45), libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)
Package: ai-choosers
Status: install ok unpacked
Version: 0.02
Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23)
Description: Delayed configuration of locale and keyboard for auto-install
Installer-Menu-Item: 22
Package: libiw28-udeb
Status: install ok installed
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions
Package: load-cdrom
Status: install ok installed
Version: 1.12
Depends: cdebconf-udeb, cdrom-retriever, anna (>= 1.07)
Description: Load installer components from CD
Installer-Menu-Item: 16
Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.108
Depends: cdebconf-udeb, libc6 (>= 2.3.5-1)
Description: Plain text frontend for Debian Configuration Management System
Package: iso-3166-udeb
Status: install ok installed
Version: 0.58-1
Description: provides iso_3166.tab file
Package: floppy-retriever
Status: install ok unpacked
Version: 1.11
Provides: retriever
Depends: cdebconf-udeb, mountfloppy
Description: Fetches modules from a floppy
Package: ethdetect
Status: install ok installed
Version: 1.43
Provides: ethernet-card-detection
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 18
Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-3
Depends: libc6 (>= 2.3.5-1)
Description: Tiny utilities for the debian-installer
Package: initrd-preseed
Status: install ok unpacked
Version: 1.20
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd
Package: usb-modules-2.6.17-2-amd64-di
Status: install ok unpacked
Version: 1.14
Provides: usb-modules
Depends: kernel-image-2.6.17-2-amd64-di
Description: USB support
Package: usb-serial-modules-2.6.17-2-amd64-di
Status: install ok unpacked
Version: 1.14
Provides: usb-serial-modules
Depends: kernel-image-2.6.17-2-amd64-di, usb-modules-2.6.17-2-amd64-di
Description: USB serial drivers
Package: archdetect
Status: install ok installed
Version: 1.43
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.45)
Description: Hardware architecture detector
Package: scsi-common-modules-2.6.17-2-amd64-di
Status: install ok unpacked
Version: 1.14
Provides: scsi-common-modules
Depends: kernel-image-2.6.17-2-amd64-di, scsi-core-modules-2.6.17-2-amd64-di, cdrom-core-modules-2.6.17-2-amd64-di
Description: Very common SCSI drivers
Package: pcmcia-storage-modules-2.6.17-2-amd64-di
Status: install ok unpacked
Version: 1.14
Provides: pcmcia-storage-modules
Depends: kernel-image-2.6.17-2-amd64-di, ide-core-modules-2.6.17-2-amd64-di, cdrom-core-modules-2.6.17-2-amd64-di, pcmcia-modules-2.6.17-2-amd64-di
Description: PCMCIA storage drivers
Package: save-logs
Status: install ok unpacked
Version: 2.23
Depends: cdebconf-udeb
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.39
Depends: cdebconf-udeb
Description: Reboot
Installer-Menu-Item: 995
Package: anna
Status: install ok installed
Version: 1.25
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: libsysfs2-udeb
Status: install ok unpacked
Version: 2.1.0-1
Provides: libsysfs2
Depends: libc6 (>= 2.3.5-1)
Description: interface library to sysfs
Package: pcmciautils-udeb
Status: install ok unpacked
Version: 014-2
Depends: udev-udeb, libc6 (>= 2.3.5-1), libsysfs2-udeb
Description: PCMCIA utilities for Linux 2.6
Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.4-1
Depends: libc6 (>= 2.3.5-1), zlib1g-udeb (>= 1:1.2.1)
Description: Linux PCI Utilities (udeb)
Package: console-keymaps-at
Status: install ok installed
Version: 2:1.01-1
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.39
Description: Terminfo entries needed by newt/slang in debian installer
Package: hw-detect
Status: install ok installed
Version: 1.43
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it
Package: kbd-chooser
Status: install ok installed
Version: 1.31
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.45
Depends: libc6 (>= 2.3.5-1)
Description: Library of common debian-installer functions
Package: scsi-core-modules-2.6.17-2-amd64-di
Status: install ok unpacked
Version: 1.14
Provides: scsi-core-modules
Depends: kernel-image-2.6.17-2-amd64-di
Description: Core SCSI subsystem
Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale
Package: env-preseed
Status: install ok unpacked
Version: 1.20
Description: debconf preseeding via environment variables
Package: mountfloppy
Status: install ok unpacked
Version: 0.8
Depends: cdebconf-udeb, di-utils (>= 1.15)
Description: Mounts a floppy
Package: cdebconf-priority
Status: install ok unpacked
Version: 0.108
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930
Package: netcfg
Status: install ok installed
Version: 1.31
Provides: configured-network
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Description: Configure the network
Installer-Menu-Item: 18
Package: file-preseed
Status: install ok unpacked
Version: 1.20
Depends: cdebconf-udeb, di-utils, preseed-common
Description: load debconf preseed file
Installer-Menu-Item: 14
Package: ide-core-modules-2.6.17-2-amd64-di
Status: install ok unpacked
Version: 1.14
Provides: ide-core-modules
Depends: kernel-image-2.6.17-2-amd64-di
Description: IDE support
Package: zlib1g-udeb
Status: install ok unpacked
Version: 1:1.2.3-13
Provides: zlib1g
Description: compression library - runtime for Debian installer
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.108
Depends: libc6 (>= 2.3.5-1), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.5
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: serial-modules-2.6.17-2-amd64-di
Status: install ok unpacked
Version: 1.14
Provides: serial-modules
Depends: kernel-image-2.6.17-2-amd64-di, pcmcia-modules-2.6.17-2-amd64-di
Description: Serial drivers
Package: cdrom-detect
Status: install ok installed
Version: 1.18
Depends: cdebconf-udeb, hw-detect, di-utils (>= 1.33)
Description: Detect CDROM devices and mount the CD
Installer-Menu-Item: 13
Package: debian-installer
Status: install ok installed
Version: cdrom-isolinux-20061031
Description: debian installation image
Package: apt-cdrom-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 44
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: cdrom-detect, cdebconf-udeb
Provides: apt-mirror-setup
Description: set up a CD in sources.list
Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 152
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: choose-mirror-bin, cdebconf-udeb
Description: set up a mirror in sources.list
Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: apt-mirror-setup, base-installer (>= 1.49), cdebconf-udeb
Description: Configure apt
Installer-Menu-Item: 70
Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 596
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.68
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19)
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65
Package: choose-mirror-bin
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 272
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.08
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: Choose mirror to install from (program)
Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 72
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.12
Depends: cdebconf-udeb, os-prober, tzsetup-udeb
Description: set up clock
Installer-Menu-Item: 62
Package: crc-modules-2.6.17-2-amd64-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-amd64-di
Provides: crc-modules
Description: CRC modules
This package contains CRC support modules.
Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 228
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3
Depends: libc6 (>= 2.3.5-1), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: dhcp-client-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 160
Maintainer: Eloy A. Paris <peloy@debian.org>
Version: 2.0pl5-19.4
Depends: libc6 (>= 2.3.5-1)
Description: DHCP Client for debian-installer
dhcp-client-udeb is a minimal dhcp package used by the debian-installer.
Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 20
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.39
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.45)
Description: mapdevfs utility for the debian installer
Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 60
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.43
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35
Package: dmidecode-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 76
Maintainer: Petter Reinholdtsen <pere@debian.org>
Version: 2.8-2
Depends: libc6 (>= 2.3.5-1)
Description: Dump Desktop Management Interface data (udeb)
Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 424
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.10.02+dfsg-2
Depends: libblkid1-udeb, libc6 (>= 2.3.5-1)
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: ext3-modules-2.6.17-2-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 436
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-amd64-di
Provides: ext3-modules
Description: EXT3 filesystem support
This package contains the EXT3 filesystem module for the Linux kernel.
Package: fdisk-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 168
Maintainer: LaMont Jones <lamont@debian.org>
Version: 2.12r-12
Depends: libc6 (>= 2.3.5-1)
Description: Partition a hard drive (manual)
fdisk package
Package: finish-install
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.5
Depends: cdebconf-udeb, archdetect, base-installer, created-fstab, bootable-system
Provides: prebaseconfig
Description: Finish the installation and reboot
Installer-Menu-Item: 78
Package: grub-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 356
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.19
Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>= 1.15), di-utils-mapdevfs, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install GRUB on a hard disk
Installer-Menu-Item: 73
Package: jfs-modules-2.6.17-2-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 324
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-amd64-di
Provides: jfs-modules
Description: JFS filesystem support
This package contains the JFS filesystem module for the Linux kernel.
Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 1004
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.11-1
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Description: A stripped-down version of jfsutils, for debian-installer
This package is a jfsutils package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 48
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.10.02+dfsg-2
Depends: libc6 (>= 2.3.5-1)
Provides: libblkid1
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 2136
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6.ds1-7
Provides: libc6, libc-udeb, glibc-2.3.6.ds1-1, glibc-2.3.6-2
Description: GNU C Library: Shared libraries - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains a minimal set of libraries needed for the Debian
installer. Do not install it on a normal system.
Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 84
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.08-1
Depends: libc6 (>= 2.3.5-1)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
This is a udeb, or a microdeb, for the debian-installer.
.
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 352
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-2.1
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.10.02+dfsg-2
Depends: libc6 (>= 2.3.5-1)
Provides: libuuid1
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's),
using a standard which is blessed by both Microsoft and DCE, and is
being proposed as an internet standard. See the internet-draft:
.
draft-leach-uuids-guids-01.txt
.
for more information.
.
This is a minimal package for debian-installer.
Package: lilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.18
Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15), di-utils-mapdevfs, fdisk-udeb, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install LILO on a hard disk
Installer-Menu-Item: 75
Package: loop-modules-2.6.17-2-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-amd64-di
Provides: loop-modules
Description: Loopback filesystem support
This package contains loopback filesystem support for the Linux kernel.
Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 472
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.06-3
Depends: libc6 (>= 2.3.5-1), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
This is a udeb, or a microdeb, for the debian-installer.
.
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Package: md-modules-2.6.17-2-amd64-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 604
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-amd64-di
Provides: md-modules
Description: RAID and LVM support
This package contains RAID and LVM modules for the Linux kernel.
Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 184
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 2.5.5-1
Depends: libc6 (>= 2.3.5-1)
Description: tool to administer Linux MD arrays (software RAID)
mdadm is a program that can be used to create, manage, and monitor MD
arrays (e.g. software RAID, multipath devices).
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 384
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.19
Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb (>= 2.5.2), partconf-find-partitions
Description: Configure MD devices
Use this module to configure the MD devices.
Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 168
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-4
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Description: User-level tools for ReiserFS filesystems
This installer module contains the utility to create ReiserFS filesystems.
.
Homepage: http://www.namesys.com/
Package: network-preseed
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.20
Depends: cdebconf-udeb, configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21
Package: nic-extra-modules-2.6.17-2-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 3652
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-amd64-di, nic-shared-modules-2.6.17-2-amd64-di, firmware-modules-2.6.17-2-amd64-di, crc-modules-2.6.17-2-amd64-di
Provides: nic-extra-modules
Description: Rare NIC drivers
This package contains rare NIC drivers for the Linux kernel.
Package: nic-modules-2.6.17-2-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 728
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-amd64-di, nic-shared-modules-2.6.17-2-amd64-di, firmware-modules-2.6.17-2-amd64-di, firewire-core-modules-2.6.17-2-amd64-di
Provides: nic-modules
Description: Common NIC drivers
This package contains common NIC drivers for the Linux kernel.
Package: nic-pcmcia-modules-2.6.17-2-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 904
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-amd64-di, nic-shared-modules-2.6.17-2-amd64-di, nic-extra-modules-2.6.17-2-amd64-di, pcmcia-modules-2.6.17-2-amd64-di
Provides: nic-pcmcia-modules
Description: Common PCMCIA NIC drivers
This package contains common PCMCIA NIC drivers for the Linux kernel.
Package: nic-shared-modules-2.6.17-2-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 72
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-amd64-di
Provides: nic-shared-modules
Description: Shared NIC drivers
This package contains NIC drivers needed by combinations of nic-modules,
nic-extra-modules, and nic-pcmcia-modules.
Package: nic-usb-modules-2.6.17-2-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 316
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-amd64-di, nic-shared-modules-2.6.17-2-amd64-di, usb-modules-2.6.17-2-amd64-di, firmware-modules-2.6.17-2-amd64-di
Provides: nic-usb-modules
Description: USB NIC drivers
This package contains USB network adapter drivers for the Linux kernel.
Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 144
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
This package will skip installing a boot-loader
Installer-Menu-Item: 77
Package: ntfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 232
Maintainer: David Martínez Moreno <ender@debian.org>
Version: 1.13.1-4
Depends: libc6 (>= 2.3.5-1)
Provides: ntfstools-udeb
Description: Tools for doing neat things in NTFS partitions from Linux - udeb
Currently this udeb contains only ntfsresize.
Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 128
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
This package is to be used by boot loader installers to detect other OSes
available on a system, in a generic format, which it can then adapt to its
own configuration format.
Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 36
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.19
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.45), libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for finding partitions
Helper program for finding partitions and detecting their size and
existing file system.
Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 76
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-2.1
Depends: libc6 (>= 2.3.5-1), libparted1.7-udeb (>= 1.7.1-1)
Provides: parted
Description: The GNU Parted disk partition resizing program
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package is similar to the "big" parted package, but has
less cosmetical features resulting in smaller binary. Intended
to be used in debian-installer.
.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 656
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 60
Depends: cdebconf-udeb, di-utils, partman-base, partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)
Package: partman-auto-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 3
Depends: cdebconf-udeb, partman-auto (>= 55), partman-auto-lvm (>= 14), partman-crypto (>= 13), partman-base (>= 87)
Description: Automatically partition storage devices using crypto and LVM
Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 148
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 18
Depends: cdebconf-udeb, partman-base (>= 73), partman-auto (>= 59), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM
Package: partman-auto-raid
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2
Depends: cdebconf-udeb, partman-base, partman-basicfilesystems, partman-ext3, partman-auto (>= 58), partman-md
Description: Allow preseeded RAID installs
Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 864
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 97
Depends: libc6 (>= 2.3.5-1), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42
Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 576
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 49
Depends: cdebconf-udeb, e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32
Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 124
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 32
Depends: cdebconf-udeb
Provides: partman-method
Description: Basic partition usage methods for partman
This package provides partman with two methods to use partitions.
The first is to format the partition. The second is to keep and use
the existing data in the partition as it is.
Package: partman-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 860
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 17
Depends: partman-base (>= 87), libc6 (>= 2.3.5-1), cdebconf-udeb
Description: Add to partman support for block device encryption
Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 43
Depends: cdebconf-udeb, e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3
Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 260
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 18
Depends: cdebconf-udeb, jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman
Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 680
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 47
Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb
Description: Adds support for LVM to partman
Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 156
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 30
Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87)
Description: Add to partman support for MD
Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 364
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 44
Depends: ntfsprogs-udeb, cdebconf-udeb
Description: Partitioning operations for partman
This udeb provides partman with editing operations for creation
of new partitions, deletion of partitions and initialisation of the
partition table.
Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 228
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 32
Depends: cdebconf-udeb, mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs
Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 304
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 46
Depends: cdebconf-udeb, partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
This udeb allows the user to choose how partitions should be used.
Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 30
Depends: cdebconf-udeb, xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs
Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 28
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.10
Depends: cdebconf-udeb, apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70
Package: reiserfs-modules-2.6.17-2-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 432
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-amd64-di
Provides: reiserfs-modules
Description: Reiser filesystem support
This package contains the Reiser filesystem module for the Linux kernel.
Package: scsi-extra-modules-2.6.17-2-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 2128
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: scsi-modules-2.6.17-2-amd64-di, scsi-core-modules-2.6.17-2-amd64-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
This package contains uncommon SCSI drivers for the Linux kernel.
This includes SCSI RAID drivers, and some of the less common SCSI
controllers.
Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 292
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.12
Depends: cdebconf-udeb, localechooser
Description: choose timezone
Installer-Menu-Item: 62
Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 336
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.7
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63
Package: wireless-tools-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: Guus Sliepen <guus@debian.org>
Version: 28-1
Depends: libc6 (>= 2.3.5-1), libiw28-udeb (>= 28)
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: xfs-modules-2.6.17-2-amd64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 936
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-amd64-di
Provides: xfs-modules
Description: XFS filesystem support
This package contains the XFS filesystem module for the Linux kernel.
Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 272
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.8.11-1
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Description: A stripped-down version of xfsprogs, for debian-installer
This package is an xfsprogs package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: ntfs-modules-2.6.17-2-amd64-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 352
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-amd64-di
Provides: ntfs-modules
Description: NTFS filesystem support
This package contains the NTFS file system module for the Linux kernel.
Package: qnx4-modules-2.6.17-2-amd64-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 60
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: kernel-image-2.6.17-2-amd64-di
Provides: qnx4-modules
Description: QNX4 filesystem support
This package contains the QNX4 filesystem module for the Linux kernel.
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.17-2-amd64
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
installation-report depends on no packages.
Versions of packages installation-report recommends:
pn pciutils <none> (no description available)
ii reportbug 3.30 reports bugs in the Debian distrib
-- no debconf information
Reply to: