[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#396685: installation-report: Successful installation on MicroStar MS-6728 motherboard based desktop



Package: installation-reports
Version: 2.20
Severity: minor
Tags: l10n


Some quick notes. Sorry, I have no time to post many separate bug 
reports.

Installer:

 * Although usually I prefer to use English UI, I selected Russian 
because I knew from my previous experience with Etch installer that 
otherwise Linux console isn't properly configured for Russian input and 
output. I think this fact should be clearly mentioned on the language 
selection screen.
 * Ugly Russian font inside the installer. It is fine on the installed 
system though.
 * I don't think it is good to translate "swap" into abbreaviated
russian word on "Disk set-up" screen. The abbreviation looks really
confusing to me. Instead "swap" should be used as is, and explanation
should be added into help page for "disk set-up".
 * If I switch input charset with Ctrl key, some crap characters appear 
instead of russian letters. Also, it is not mentioned anywhere, that 
charset is switched with the help of Ctrl key. In particular, I tried to 
enter Russian first/last name for the new user. Besides that, I'm not 
sure non-English value is valid for this field. If it is not, then this 
should be mentioned on the page.
 * Typo: (transliteration from Russian) "Uchetnaya zapis' dolzhno" -
last word has to be changed to "dolzhna".
 * It would be handy if setup proposed to choose between DHCP and static 
IP configuration. DHCP works in our LAN, but it provides IPs with a bit 
restricted privileges, e.g. without direct Internet access.
 * Network timeout is too long... and there is no "skip" button.
(When trying to get security updates.)
 * BTW, there should be a way to specify own contents of 
/etc/apt/sources.list. We've got working local apt-cacher in the LAN, 
but no access to the Internet from DHCP acquired address. So, I due to 
the previous issue, I had to wait several minutes for update timeout to 
continue the installation normally.
 * unreadable log messages on Alt-F4 console from apt-install; I guess
it logged Russian messages, but I saw some crap chars instead.
 * "vyyasnit' pochemu eto proizoshlo" - comma is missing before "pochemu".


Installed system:

 * Alltogether I'm satisfied with it. KOI8-R vs Unicode is still an 
issue for some applications, but I see no other way to solve it rather 
than forcing defaults to Unicode, and fixing the apps.

-- Package-specific info:

Boot method: netinst CD
Image version: Daily buildOct 26, 2006 daily buildEtch build
Date: <Date and time of the install>

Machine: MS-6728 Micro-Star mb based PC
Partitions: <df -Tl will do; the raw partition table is preferred>


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [ ]
Detect network card:    [ ]
Configure network:      [ ]
Detect CD:              [ ]
Load installer modules: [ ]
Detect hard drives:     [ ]
Partition hard drives:  [ ]
Install base system:    [ ]
Clock/timezone setup:   [ ]
User/password setup:    [ ]
Install tasks:          [ ]
Install boot loader:    [ ]
Overall install:        [ ]

Comments/Problems:

<Description of the install, in prose, and any thoughts, comments
      and ideas you had during the initial install.>


-- 

Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report.

Once you have filled out this report, mail it to submit@bugs.debian.org.

==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="3.1 (installer build 20061026)"
X_INSTALLATION_MEDIUM=cdrom

==============================================
Installer hardware-summary:
==============================================
umame -a: Linux se 2.6.17-2-486 #1 Wed Sep 13 15:56:30 UTC 2006 i686 unknown
lspci -nn: 00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570] (rev 02)
lspci -nn: 00:02.0 VGA compatible controller [0300]: Intel Corporation 82865G Integrated Graphics Controller [8086:2572] (rev 02)
lspci -nn: 00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02)
lspci -nn: 00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02)
lspci -nn: 00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [8086:24d7] (rev 02)
lspci -nn: 00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [8086:24de] (rev 02)
lspci -nn: 00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02)
lspci -nn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2)
lspci -nn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02)
lspci -nn: 00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02)
lspci -nn: 00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller [8086:24d3] (rev 02)
lspci -nn: 00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] (rev 02)
lspci -nn: 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8029(AS) [10ec:8029]
lspci -nn: 01:06.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
lspci -vnn: 00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570] (rev 02)
lspci -vnn: 	Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:7280]
lspci -vnn: 	Flags: bus master, fast devsel, latency 0
lspci -vnn: 	Memory at fe800000 (32-bit, prefetchable) [size=4M]
lspci -vnn: 	Capabilities: [e4] Vendor Specific Information
lspci -vnn: 
lspci -vnn: 00:02.0 VGA compatible controller [0300]: Intel Corporation 82865G Integrated Graphics Controller [8086:2572] (rev 02)
lspci -vnn: 	Subsystem: Intel Corporation 82865G Integrated Graphics Controller [8086:2572]
lspci -vnn: 	Flags: bus master, fast devsel, latency 0, IRQ 11
lspci -vnn: 	Memory at f0000000 (32-bit, prefetchable) [size=128M]
lspci -vnn: 	Memory at ffe80000 (32-bit, non-prefetchable) [size=512K]
lspci -vnn: 	I/O ports at ec00 [size=8]
lspci -vnn: 	Capabilities: [d0] Power Management version 1
lspci -vnn: 
lspci -vnn: 00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02)
lspci -vnn: 	Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:7280]
lspci -vnn: 	Flags: bus master, medium devsel, latency 0, IRQ 185
lspci -vnn: 	I/O ports at dc00 [size=32]
lspci -vnn: 
lspci -vnn: 00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02)
lspci -vnn: 	Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:7280]
lspci -vnn: 	Flags: bus master, medium devsel, latency 0, IRQ 193
lspci -vnn: 	I/O ports at e000 [size=32]
lspci -vnn: 
lspci -vnn: 00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [8086:24d7] (rev 02)
lspci -vnn: 	Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:7280]
lspci -vnn: 	Flags: bus master, medium devsel, latency 0, IRQ 169
lspci -vnn: 	I/O ports at e400 [size=32]
lspci -vnn: 
lspci -vnn: 00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [8086:24de] (rev 02)
lspci -vnn: 	Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:7280]
lspci -vnn: 	Flags: bus master, medium devsel, latency 0, IRQ 185
lspci -vnn: 	I/O ports at e800 [size=32]
lspci -vnn: 
lspci -vnn: 00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20)
lspci -vnn: 	Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:7280]
lspci -vnn: 	Flags: bus master, medium devsel, latency 0, IRQ 177
lspci -vnn: 	Memory at ffe7bc00 (32-bit, non-prefetchable) [size=1K]
lspci -vnn: 	Capabilities: [50] Power Management version 2
lspci -vnn: 	Capabilities: [58] Debug port
lspci -vnn: 
lspci -vnn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2)
lspci -vnn: 	Flags: bus master, fast devsel, latency 0
lspci -vnn: 	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
lspci -vnn: 	I/O behind bridge: 0000c000-0000cfff
lspci -vnn: 	Memory behind bridge: ffc00000-ffcfffff
lspci -vnn: 	Prefetchable memory behind bridge: 40000000-400fffff
lspci -vnn: 
lspci -vnn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02)
lspci -vnn: 	Flags: bus master, medium devsel, latency 0
lspci -vnn: 
lspci -vnn: 00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP])
lspci -vnn: 	Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:7280]
lspci -vnn: 	Flags: bus master, medium devsel, latency 0, IRQ 169
lspci -vnn: 	I/O ports at <unassigned>
lspci -vnn: 	I/O ports at <unassigned>
lspci -vnn: 	I/O ports at <unassigned>
lspci -vnn: 	I/O ports at <unassigned>
lspci -vnn: 	I/O ports at fc00 [size=16]
lspci -vnn: 	Memory at 40100000 (32-bit, non-prefetchable) [size=1K]
lspci -vnn: 
lspci -vnn: 00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller [8086:24d3] (rev 02)
lspci -vnn: 	Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:7280]
lspci -vnn: 	Flags: medium devsel, IRQ 10
lspci -vnn: 	I/O ports at 0c00 [size=32]
lspci -vnn: 
lspci -vnn: 00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] (rev 02)
lspci -vnn: 	Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:0080]
lspci -vnn: 	Flags: bus master, medium devsel, latency 0, IRQ 10
lspci -vnn: 	I/O ports at d800 [size=256]
lspci -vnn: 	I/O ports at d400 [size=64]
lspci -vnn: 	Memory at ffe7ba00 (32-bit, non-prefetchable) [size=512]
lspci -vnn: 	Memory at ffe7b900 (32-bit, non-prefetchable) [size=256]
lspci -vnn: 	Capabilities: [50] Power Management version 2
lspci -vnn: 
lspci -vnn: 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8029(AS) [10ec:8029]
lspci -vnn: 	Flags: medium devsel, IRQ 185
lspci -vnn: 	I/O ports at cc00 [size=32]
lspci -vnn: 	Expansion ROM at 40000000 [disabled] [size=32K]
lspci -vnn: 
lspci -vnn: 01:06.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
lspci -vnn: 	Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:728c]
lspci -vnn: 	Flags: bus master, medium devsel, latency 32, IRQ 201
lspci -vnn: 	I/O ports at c800 [size=256]
lspci -vnn: 	Memory at ffceff00 (32-bit, non-prefetchable) [size=256]
lspci -vnn: 	Capabilities: [50] Power Management version 2
lspci -vnn: 
lsmod: Module                  Size  Used by
lsmod: sd_mod                 18448  0 
lsmod: nls_cp437               5888  0 
lsmod: qnx4                   10484  0 
lsmod: ntfs                  184468  0 
lsmod: xfs                   481140  0 
lsmod: reiserfs              210176  0 
lsmod: jfs                   156124  0 
lsmod: ext3                  115336  2 
lsmod: jbd                    45460  1 ext3
lsmod: vfat                   11520  0 
lsmod: fat                    45852  1 vfat
lsmod: ne2k_pci               10336  0 
lsmod: 8390                    8576  1 ne2k_pci
lsmod: 8139too                23680  0 
lsmod: 8139cp                 19328  0 
lsmod: mii                     5248  2 8139too,8139cp
lsmod: nls_iso8859_1           4224  0 
lsmod: rsrc_nonstatic         11904  0 
lsmod: pcmcia_core            36368  1 rsrc_nonstatic
lsmod: isofs                  31672  0 
lsmod: ide_generic             1408  0 [permanent]
lsmod: pdc202xx_new            7936  0 [permanent]
lsmod: aec62xx                 6784  0 [permanent]
lsmod: alim15x3               11020  0 [permanent]
lsmod: amd74xx                12700  0 [permanent]
lsmod: atiixp                  5520  0 [permanent]
lsmod: cmd64x                 10140  0 [permanent]
lsmod: cs5520                  4608  0 [permanent]
lsmod: cs5530                  4864  0 [permanent]
lsmod: cs5535                  4224  0 [permanent]
lsmod: cy82c693                4356  0 [permanent]
lsmod: hpt34x                  4992  0 [permanent]
lsmod: it821x                  7812  0 [permanent]
lsmod: ns87415                 4168  0 [permanent]
lsmod: opti621                 4100  0 [permanent]
lsmod: pdc202xx_old            9472  0 [permanent]
lsmod: rz1000                  2688  0 [permanent]
lsmod: sc1200                  6656  0 [permanent]
lsmod: serverworks             8200  0 [permanent]
lsmod: siimage                10752  0 [permanent]
lsmod: sis5513                12424  0 [permanent]
lsmod: slc90e66                5120  0 [permanent]
lsmod: triflex                 3712  0 [permanent]
lsmod: trm290                  3972  0 [permanent]
lsmod: via82cxxx               8324  0 [permanent]
lsmod: floppy                 52868  0 
lsmod: usb_storage            69952  0 
lsmod: scsi_mod              120840  2 sd_mod,usb_storage
lsmod: vga16fb                11400  2 
lsmod: vgastate                7808  1 vga16fb
lsmod: usbserial              28136  0 
lsmod: usbhid                 35040  0 
lsmod: usbkbd                  6656  0 
lsmod: thermal                12680  0 
lsmod: processor              21440  1 thermal
lsmod: fan                     4484  0 
lsmod: ide_cd                 35104  0 
lsmod: cdrom                  32288  1 ide_cd
lsmod: ide_disk               14976  4 
lsmod: generic                 4356  0 [permanent]
lsmod: uhci_hcd               19464  0 
lsmod: ehci_hcd               26888  0 
lsmod: usbcore               108544  7 usb_storage,usbserial,usbhid,usbkbd,uhci_hcd,ehci_hcd
lsmod: piix                    9220  0 [permanent]
lsmod: ide_core              107940  30 ide_generic,pdc202xx_new,aec62xx,alim15x3,amd74xx,atiixp,cmd64x,cs5520,cs5530,cs5535,cy82c693,hpt34x,it821x,ns87415,opti621,pdc202xx_old,rz1000,sc1200,serverworks,siimage,sis5513,slc90e66,triflex,trm290,via82cxxx,usb_storage,ide_cd,ide_disk,generic,piix
lsmod: parport_pc             31524  0 
lsmod: parport                31944  1 parport_pc
df: Filesystem           1k-blocks      Used Available Use% Mounted on
df: tmpfs                   514364       416    513948   0% /dev
df: tmpfs                   514364       416    513948   0% /dev
df: tmpfs                   514364       416    513948   0% /.dev
df: /dev/ide/host0/bus0/target0/lun0/part3   6728312    391520   5995012   6% /target
df: /dev/ide/host0/bus0/target0/lun0/part6 117007604    192208 110871752   0% /target/home
free:               total         used         free       shared      buffers
free:   Mem:      1028732       352132       676600            0        27928
free:  Swap:      3012148          316      3011832
free: Total:      4040880       352448      3688432
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 30: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 31: cardctl: not found
/proc/cpuinfo: processor	: 0
/proc/cpuinfo: vendor_id	: GenuineIntel
/proc/cpuinfo: cpu family	: 15
/proc/cpuinfo: model		: 3
/proc/cpuinfo: model name	: Intel(R) Pentium(R) 4 CPU 2.80GHz
/proc/cpuinfo: stepping	: 3
/proc/cpuinfo: cpu MHz		: 2800.503
/proc/cpuinfo: cache size	: 1024 KB
/proc/cpuinfo: fdiv_bug	: no
/proc/cpuinfo: hlt_bug		: no
/proc/cpuinfo: f00f_bug	: no
/proc/cpuinfo: coma_bug	: no
/proc/cpuinfo: fpu		: yes
/proc/cpuinfo: fpu_exception	: yes
/proc/cpuinfo: cpuid level	: 5
/proc/cpuinfo: wp		: yes
/proc/cpuinfo: flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe constant_tsc up pni monitor ds_cpl cid
/proc/cpuinfo: bogomips	: 5605.68
/proc/cpuinfo: 
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 0170-0177 : ide1
/proc/ioports: 01f0-01f7 : ide0
/proc/ioports: 02f8-02ff : serial
/proc/ioports: 0376-0376 : ide1
/proc/ioports: 0378-037a : parport0
/proc/ioports: 037b-037f : parport0
/proc/ioports: 03c0-03df : vga+
/proc/ioports: 03f6-03f6 : ide0
/proc/ioports: 03f8-03ff : serial
/proc/ioports: 0400-043f : 0000:00:1f.0
/proc/ioports: 0778-077a : parport0
/proc/ioports: 0800-087f : 0000:00:1f.0
/proc/ioports:   0800-0803 : PM1a_EVT_BLK
/proc/ioports:   0804-0805 : PM1a_CNT_BLK
/proc/ioports:   0808-080b : PM_TMR
/proc/ioports:   0810-0815 : ACPI CPU throttle
/proc/ioports:   0828-082f : GPE0_BLK
/proc/ioports: 0c00-0c1f : 0000:00:1f.3
/proc/ioports: c000-cfff : PCI Bus #01
/proc/ioports:   c800-c8ff : 0000:01:06.0
/proc/ioports:     c800-c8ff : 8139too
/proc/ioports:   cc00-cc1f : 0000:01:00.0
/proc/ioports:     cc00-cc1f : ne2k-pci
/proc/ioports: d400-d43f : 0000:00:1f.5
/proc/ioports: d800-d8ff : 0000:00:1f.5
/proc/ioports: dc00-dc1f : 0000:00:1d.0
/proc/ioports:   dc00-dc1f : uhci_hcd
/proc/ioports: e000-e01f : 0000:00:1d.1
/proc/ioports:   e000-e01f : uhci_hcd
/proc/ioports: e400-e41f : 0000:00:1d.2
/proc/ioports:   e400-e41f : uhci_hcd
/proc/ioports: e800-e81f : 0000:00:1d.3
/proc/ioports:   e800-e81f : uhci_hcd
/proc/ioports: ec00-ec07 : 0000:00:02.0
/proc/ioports: fc00-fc0f : 0000:00:1f.1
/proc/ioports:   fc00-fc07 : ide0
/proc/ioports:   fc08-fc0f : ide1
/proc/iomem: 00000000-0009fbff : System RAM
/proc/iomem:   00000000-00000000 : Crash kernel
/proc/iomem: 0009fc00-0009ffff : reserved
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000ca5ff : Video ROM
/proc/iomem: 000e0000-000effff : Extension ROM
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-3f7effff : System RAM
/proc/iomem:   00100000-0026c0f2 : Kernel code
/proc/iomem:   0026c0f3-002f9cef : Kernel data
/proc/iomem: 3f7f0000-3f7f7fff : ACPI Tables
/proc/iomem: 3f7f8000-3f7fffff : ACPI Non-volatile Storage
/proc/iomem: 40000000-400fffff : PCI Bus #01
/proc/iomem:   40000000-40007fff : 0000:01:00.0
/proc/iomem: 40100000-401003ff : 0000:00:1f.1
/proc/iomem: f0000000-f7ffffff : 0000:00:02.0
/proc/iomem: fe800000-febfffff : 0000:00:00.0
/proc/iomem: fec00000-fec00fff : reserved
/proc/iomem: fee00000-fee00fff : reserved
/proc/iomem: ffc00000-ffcfffff : PCI Bus #01
/proc/iomem:   ffceff00-ffceffff : 0000:01:06.0
/proc/iomem:     ffceff00-ffceffff : 8139too
/proc/iomem: ffe7b900-ffe7b9ff : 0000:00:1f.5
/proc/iomem: ffe7ba00-ffe7bbff : 0000:00:1f.5
/proc/iomem: ffe7bc00-ffe7bfff : 0000:00:1d.7
/proc/iomem:   ffe7bc00-ffe7bfff : ehci_hcd
/proc/iomem: ffe80000-ffefffff : 0000:00:02.0
/proc/iomem: fff00000-ffffffff : reserved
/proc/interrupts:            CPU0       
/proc/interrupts:   0:     555590    IO-APIC-edge  timer
/proc/interrupts:   1:       2290    IO-APIC-edge  i8042
/proc/interrupts:   7:          0    IO-APIC-edge  parport0
/proc/interrupts:   9:          0   IO-APIC-level  acpi
/proc/interrupts:  14:      20230    IO-APIC-edge  ide0
/proc/interrupts:  15:       1587    IO-APIC-edge  ide1
/proc/interrupts: 169:          0   IO-APIC-level  uhci_hcd:usb4
/proc/interrupts: 177:          0   IO-APIC-level  ehci_hcd:usb1
/proc/interrupts: 185:          0   IO-APIC-level  uhci_hcd:usb2, uhci_hcd:usb5
/proc/interrupts: 193:          0   IO-APIC-level  uhci_hcd:usb3
/proc/interrupts: 201:       2767   IO-APIC-level  eth0
/proc/interrupts: NMI:          0 
/proc/interrupts: LOC:     555567 
/proc/interrupts: ERR:          0
/proc/interrupts: MIS:          0
/proc/meminfo: MemTotal:      1028732 kB
/proc/meminfo: MemFree:        676480 kB
/proc/meminfo: Buffers:         27928 kB
/proc/meminfo: Cached:         269620 kB
/proc/meminfo: SwapCached:        316 kB
/proc/meminfo: Active:         177304 kB
/proc/meminfo: Inactive:       135608 kB
/proc/meminfo: HighTotal:           0 kB
/proc/meminfo: HighFree:            0 kB
/proc/meminfo: LowTotal:      1028732 kB
/proc/meminfo: LowFree:        676480 kB
/proc/meminfo: SwapTotal:     3012148 kB
/proc/meminfo: SwapFree:      3011832 kB
/proc/meminfo: Dirty:            2056 kB
/proc/meminfo: Writeback:           0 kB
/proc/meminfo: Mapped:          16924 kB
/proc/meminfo: Slab:            28628 kB
/proc/meminfo: CommitLimit:   3526512 kB
/proc/meminfo: Committed_AS:    18988 kB
/proc/meminfo: PageTables:        232 kB
/proc/meminfo: VmallocTotal:   261840 kB
/proc/meminfo: VmallocUsed:      9200 kB
/proc/meminfo: VmallocChunk:   251660 kB
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
/proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd 
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=4 2000000 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices: 
dmidecode: # dmidecode 2.8
dmidecode: SMBIOS 2.3 present.
dmidecode: 24 structures occupying 911 bytes.
dmidecode: Table at 0x000F0630.
dmidecode: 
dmidecode: Handle 0x0000, DMI type 0, 20 bytes
dmidecode: BIOS Information
dmidecode: 	Vendor: American Megatrends Inc.
dmidecode: 	Version: V3.2      
dmidecode: 	Release Date: 11/06/2003
dmidecode: 	Address: 0xF0000
dmidecode: 	Runtime Size: 64 kB
dmidecode: 	ROM Size: 512 kB
dmidecode: 	Characteristics:
dmidecode: 		ISA is supported
dmidecode: 		PCI is supported
dmidecode: 		PNP is supported
dmidecode: 		APM is supported
dmidecode: 		BIOS is upgradeable
dmidecode: 		BIOS shadowing is allowed
dmidecode: 		ESCD support is available
dmidecode: 		Boot from CD is supported
dmidecode: 		Selectable boot is supported
dmidecode: 		BIOS ROM is socketed
dmidecode: 		EDD is supported
dmidecode: 		5.25"/360 KB floppy services are supported (int 13h)
dmidecode: 		5.25"/1.2 MB floppy services are supported (int 13h)
dmidecode: 		3.5"/720 KB floppy services are supported (int 13h)
dmidecode: 		3.5"/2.88 MB floppy services are supported (int 13h)
dmidecode: 		Print screen service is supported (int 5h)
dmidecode: 		8042 keyboard services are supported (int 9h)
dmidecode: 		Printer services are supported (int 17h)
dmidecode: 		CGA/mono video services are supported (int 10h)
dmidecode: 		ACPI is supported
dmidecode: 		USB legacy is supported
dmidecode: 		AGP is supported
dmidecode: 		LS-120 boot is supported
dmidecode: 		ATAPI Zip drive boot is supported
dmidecode: 		BIOS boot specification is supported
dmidecode: 
dmidecode: Handle 0x0001, DMI type 1, 25 bytes
dmidecode: System Information
dmidecode: 	Manufacturer: MICRO-STAR INC.
dmidecode: 	Product Name: MS-6728
dmidecode: 	Version: 2.00
dmidecode: 	Serial Number: 00000000
dmidecode: 	UUID: Not Settable
dmidecode: 	Wake-up Type: Modem Ring
dmidecode: 
dmidecode: Handle 0x0002, DMI type 2, 8 bytes
dmidecode: Base Board Information
dmidecode: 	Manufacturer: MICRO-STAR INC.
dmidecode: 	Product Name: MS-6728
dmidecode: 	Version: 2.00
dmidecode: 	Serial Number: 00000000
dmidecode: 
dmidecode: Handle 0x0003, DMI type 3, 17 bytes
dmidecode: Chassis Information
dmidecode: 	Manufacturer: Uknown Chassis Manufacture
dmidecode: 	Type: Desktop
dmidecode: 	Lock: Not Present
dmidecode: 	Version: Version 1.00
dmidecode: 	Serial Number: 123456890
dmidecode: 	Asset Tag: 0123ABC
dmidecode: 	Boot-up State: Unknown
dmidecode: 	Power Supply State: Unknown
dmidecode: 	Thermal State: Unknown
dmidecode: 	Security Status: Unknown
dmidecode: 	OEM Information: 0x00000000
dmidecode: 
dmidecode: Handle 0x0004, DMI type 4, 32 bytes
dmidecode: Processor Information
dmidecode: 	Socket Designation: FC-478
dmidecode: 	Type: Central Processor
dmidecode: 	Family: Other
dmidecode: 	Manufacturer: Intel                                           
dmidecode: 	ID: 33 0F 0A 08 FF FB EB BF
dmidecode: 	Version: Intel(R) Pentium(R) 4 Processor                 
dmidecode: 	Voltage: 3.3 V 2.9 V
dmidecode: 	External Clock: 200 MHz
dmidecode: 	Max Speed: 4000 MHz
dmidecode: 	Current Speed: 2800 MHz
dmidecode: 	Status: Populated, Enabled
dmidecode: 	Upgrade: Socket 478
dmidecode: 	L1 Cache Handle: 0x0005
dmidecode: 	L2 Cache Handle: 0x0006
dmidecode: 	L3 Cache Handle: Not Provided
dmidecode: 
dmidecode: Handle 0x0005, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: 	Socket Designation: Internal Cache
dmidecode: 	Configuration: Enabled, Not Socketed, Level 1
dmidecode: 	Operational Mode: Write Back
dmidecode: 	Location: Internal
dmidecode: 	Installed Size: 48 KB
dmidecode: 	Maximum Size: 1024 KB
dmidecode: 	Supported SRAM Types:
dmidecode: 		Synchronous
dmidecode: 	Installed SRAM Type: Pipeline Burst Synchronous
dmidecode: 	Speed: Unknown
dmidecode: 	Error Correction Type: Parity
dmidecode: 	System Type: Data
dmidecode: 	Associativity: 4-way Set-associative
dmidecode: 
dmidecode: Handle 0x0006, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: 	Socket Designation: Internal Cache
dmidecode: 	Configuration: Enabled, Not Socketed, Level 2
dmidecode: 	Operational Mode: Write Back
dmidecode: 	Location: Internal
dmidecode: 	Installed Size: 1024 KB
dmidecode: 	Maximum Size: 1024 KB
dmidecode: 	Supported SRAM Types:
dmidecode: 		Synchronous
dmidecode: 	Installed SRAM Type: Synchronous
dmidecode: 	Speed: Unknown
dmidecode: 	Error Correction Type: Parity
dmidecode: 	System Type: Unified
dmidecode: 	Associativity: 8-way Set-associative
dmidecode: 
dmidecode: Handle 0x0007, DMI type 5, 24 bytes
dmidecode: Memory Controller Information
dmidecode: 	Error Detecting Method: None
dmidecode: 	Error Correcting Capabilities: None
dmidecode: 	Supported Interleave: One-way Interleave
dmidecode: 	Current Interleave: One-way Interleave
dmidecode: 	Maximum Memory Module Size: 1024 MB
dmidecode: 	Maximum Total Memory Size: 4096 MB
dmidecode: 	Supported Speeds:
dmidecode: 		Other
dmidecode: 	Supported Memory Types:
dmidecode: 		DIMM
dmidecode: 		SDRAM
dmidecode: 	Memory Module Voltage: 3.3 V
dmidecode: 	Associated Memory Slots: 4
dmidecode: 		0x0008
dmidecode: 		0x0009
dmidecode: 		0x000A
dmidecode: 		0x000B
dmidecode: 	Enabled Error Correcting Capabilities: None
dmidecode: 
dmidecode: Handle 0x0008, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: 	Socket Designation: DIMM1
dmidecode: 	Bank Connections: 1 0
dmidecode: 	Current Speed: Unknown
dmidecode: 	Type: DIMM SDRAM
dmidecode: 	Installed Size: 512 MB (Double-bank Connection)
dmidecode: 	Enabled Size: 512 MB (Double-bank Connection)
dmidecode: 	Error Status: OK
dmidecode: 
dmidecode: Handle 0x0009, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: 	Socket Designation: DIMM2
dmidecode: 	Bank Connections: 3 2
dmidecode: 	Current Speed: Unknown
dmidecode: 	Type: Unknown
dmidecode: 	Installed Size: Not Installed
dmidecode: 	Enabled Size: Not Installed
dmidecode: 	Error Status: OK
dmidecode: 
dmidecode: Handle 0x000A, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: 	Socket Designation: DIMM3
dmidecode: 	Bank Connections: 5 4
dmidecode: 	Current Speed: Unknown
dmidecode: 	Type: DIMM SDRAM
dmidecode: 	Installed Size: 512 MB (Double-bank Connection)
dmidecode: 	Enabled Size: 512 MB (Double-bank Connection)
dmidecode: 	Error Status: OK
dmidecode: 
dmidecode: Handle 0x000B, DMI type 6, 12 bytes
dmidecode: Memory Module Information
dmidecode: 	Socket Designation: DMII4
dmidecode: 	Bank Connections: 7 6
dmidecode: 	Current Speed: Unknown
dmidecode: 	Type: Unknown
dmidecode: 	Installed Size: Not Installed
dmidecode: 	Enabled Size: Not Installed
dmidecode: 	Error Status: OK
dmidecode: 
dmidecode: Handle 0x000C, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: 	Designation: PCI1
dmidecode: 	Type: 32-bit PCI
dmidecode: 	Current Usage: In Use
dmidecode: 	Length: Long
dmidecode: 	ID: 1
dmidecode: 	Characteristics:
dmidecode: 		3.3 V is provided
dmidecode: 		Opening is shared
dmidecode: 		PME signal is supported
dmidecode: 
dmidecode: Handle 0x000D, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: 	Designation: PCI2
dmidecode: 	Type: 32-bit PCI
dmidecode: 	Current Usage: Available
dmidecode: 	Length: Long
dmidecode: 	ID: 2
dmidecode: 	Characteristics:
dmidecode: 		3.3 V is provided
dmidecode: 		Opening is shared
dmidecode: 		PME signal is supported
dmidecode: 
dmidecode: Handle 0x000E, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: 	Designation: PCI3
dmidecode: 	Type: 32-bit PCI
dmidecode: 	Current Usage: Available
dmidecode: 	Length: Long
dmidecode: 	ID: 3
dmidecode: 	Characteristics:
dmidecode: 		3.3 V is provided
dmidecode: 		Opening is shared
dmidecode: 		PME signal is supported
dmidecode: 
dmidecode: Handle 0x000F, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: 	Designation: PCI4
dmidecode: 	Type: 32-bit PCI
dmidecode: 	Current Usage: Available
dmidecode: 	Length: Long
dmidecode: 	ID: 4
dmidecode: 	Characteristics:
dmidecode: 		3.3 V is provided
dmidecode: 		Opening is shared
dmidecode: 		PME signal is supported
dmidecode: 
dmidecode: Handle 0x0010, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: 	Designation: PCI5
dmidecode: 	Type: 32-bit PCI
dmidecode: 	Current Usage: Available
dmidecode: 	Length: Long
dmidecode: 	ID: 5
dmidecode: 	Characteristics:
dmidecode: 		3.3 V is provided
dmidecode: 		Opening is shared
dmidecode: 		PME signal is supported
dmidecode: 
dmidecode: Handle 0x0011, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: 	Designation: AGP
dmidecode: 	Type: 32-bit PCI
dmidecode: 	Current Usage: Available
dmidecode: 	Length: Long
dmidecode: 	ID: 4
dmidecode: 	Characteristics:
dmidecode: 		3.3 V is provided
dmidecode: 		Opening is shared
dmidecode: 		PME signal is supported
dmidecode: 
dmidecode: Handle 0x0012, DMI type 11, 5 bytes
dmidecode: OEM Strings
dmidecode: 	String 1: SMBIOS Support from AMI
dmidecode: 	String 2: Tested by James
dmidecode: 
dmidecode: Handle 0x0013, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: USB
dmidecode: 	Internal Connector Type: Mini Centronics
dmidecode: 	External Reference Designator: Def
dmidecode: 	External Connector Type: DB-25 male
dmidecode: 	Port Type: SSA SCSI
dmidecode: 
dmidecode: Handle 0x0014, DMI type 8, 9 bytes
dmidecode: Port Connector Information
dmidecode: 	Internal Reference Designator: IEEE1394
dmidecode: 	Internal Connector Type: DB-9 male
dmidecode: 	External Reference Designator: Sanjoy
dmidecode: 	External Connector Type: Infrared
dmidecode: 	Port Type: MIDI Port
dmidecode: 
dmidecode: Handle 0x0015, DMI type 12, 5 bytes
dmidecode: System Configuration Options
dmidecode: 	Option 1: System Management BIOS from Atlanta
dmidecode: 	Option 2: SMBIOS from AMI
dmidecode: 
dmidecode: Handle 0x0016, DMI type 13, 22 bytes
dmidecode: BIOS Language Information
dmidecode: 	Installable Languages: 4
dmidecode: 		English
dmidecode: 		Traditional Chinese
dmidecode: 		Simplified Chinese
dmidecode: 		Japanese
dmidecode: 	Currently Installed Language: English
dmidecode: 
dmidecode: Handle 0x0017, DMI type 127, 4 bytes
dmidecode: End Of Table
dmidecode: 

==============================================
Installer status:
==============================================
Package: input-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: input-modules
Depends: kernel-image-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di
Description: Input devices support

Package: acpi-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: acpi-modules
Depends: kernel-image-2.6.17-2-486-di
Description: ACPI support modules

Package: scsi-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: scsi-modules
Depends: kernel-image-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di, parport-modules-2.6.17-2-486-di, cdrom-core-modules-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di
Description: SCSI drivers

Package: preseed-common
Status: install ok unpacked
Version: 1.20
Depends: cdebconf-udeb, di-utils (>= 1.14)
Description: common files for preseeding

Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone

Package: localechooser
Status: install ok installed
Version: 1.28
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10

Package: cdrom-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: cdrom-modules
Depends: ide-modules-2.6.17-2-486-di, cdrom-core-modules-2.6.17-2-486-di, kernel-image-2.6.17-2-486-di
Description: Esoteric CDROM drivers

Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6.ds1-7
Description: GNU C Library: NSS helper for DNS - udeb

Package: cdrom-checker
Status: install ok unpacked
Version: 1.09
Depends: cdrom-detect, cdebconf-udeb (>= 0.31)
Description: Verify the cd contents
Installer-Menu-Item: 940

Package: lowmemcheck
Status: install ok unpacked
Version: 1.21
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode

Package: cdrom-retriever
Status: install ok installed
Version: 1.12
Provides: retriever
Depends: cdebconf-udeb, cdrom-detect
Description: Fetch modules from a CDROM

Package: main-menu
Status: install ok unpacked
Version: 1.15
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: Debian installer main menu

Package: di-utils-shell
Status: install ok unpacked
Version: 1.38
Depends: cdebconf-udeb, di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950

Package: usb-serial-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: usb-serial-modules
Depends: kernel-image-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di
Description: USB serial drivers

Package: di-utils
Status: install ok installed
Version: 1.38
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: Miscellaneous utilities for the debian installer

Package: usb-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: usb-modules
Depends: kernel-image-2.6.17-2-486-di
Description: USB support

Package: pcmcia-storage-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: pcmcia-storage-modules
Depends: kernel-image-2.6.17-2-486-di, ide-core-modules-2.6.17-2-486-di, cdrom-core-modules-2.6.17-2-486-di, pcmcia-modules-2.6.17-2-486-di
Description: PCMCIA storage drivers

Package: scsi-core-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: scsi-core-modules
Depends: kernel-image-2.6.17-2-486-di
Description: Core SCSI subsystem

Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.108
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.6-6), libnewt0.52
Description: Newt frontend for Debian Configuration Management System

Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.2.2-3
Depends: libc6 (>= 2.3.6-6)
Description: tools for managing Linux kernel modules

Package: rootskel
Status: install ok installed
Version: 1.41
Depends: di-utils (>= 1.24), cdebconf-udeb
Description: Skeleton root filesystem used by debian-installer

Package: firmware-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: firmware-modules
Depends: kernel-image-2.6.17-2-486-di
Description: Firmware request modules

Package: udev-udeb
Status: install ok unpacked
Version: 0.100-2.1
Depends: libc6 (>= 2.3.6-6)
Description: /dev/ and hotplug management daemon

Package: fb-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: fb-modules
Depends: kernel-image-2.6.17-2-486-di
Description: Frame buffer support

Package: brltty-udeb
Status: install ok unpacked
Version: 3.7.2-4
Depends: libc6 (>= 2.3.6-6)
Description: Access software for a blind person using a soft braille terminal

Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-4
Depends: libc6 (>= 2.3.6-6)
Description: Free Implementation of the Unicode BiDi algorithm

Package: scsi-common-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: scsi-common-modules
Depends: kernel-image-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di, cdrom-core-modules-2.6.17-2-486-di
Description: Very common SCSI drivers

Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.6-6)
Description: text-wrapping library with i18n - runtime udeb

Package: pcmcia-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: pcmcia-modules
Depends: kernel-image-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di
Description: Common PCMCIA drivers

Package: auto-install
Status: install ok unpacked
Version: 0.02
Depends: netcfg, preseed-common (>= 1.18)
Description: Support for automatic installs
Installer-Menu-Item: 19

Package: usb-discover
Status: install ok unpacked
Version: 1.06
Depends: cdebconf-udeb
Description: Discover USB and load kernel modules

Package: serial-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: serial-modules
Depends: kernel-image-2.6.17-2-486-di, pcmcia-modules-2.6.17-2-486-di
Description: Serial drivers

Package: ide-core-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: ide-core-modules
Depends: kernel-image-2.6.17-2-486-di
Description: IDE support

Package: rescue-check
Status: install ok unpacked
Version: 1.7
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested

Package: nano-udeb
Status: install ok unpacked
Version: 1.9.99pre2-1
Provides: editor
Depends: libc6 (>= 2.3.6-6), libslang2-udeb (>= 2.0.6-3)
Description: free Pico clone with some new features - tiny build

Package: cdebconf-udeb
Status: install ok installed
Version: 0.108
Provides: debconf-2.0
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45), libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)

Package: ai-choosers
Status: install ok unpacked
Version: 0.02
Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23)
Description: Delayed configuration of locale and keyboard for auto-install
Installer-Menu-Item: 22

Package: floppy-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: floppy-modules
Depends: kernel-image-2.6.17-2-486-di
Description: Floppy driver

Package: libiw28-udeb
Status: install ok installed
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions

Package: parport-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: parport-modules
Depends: kernel-image-2.6.17-2-486-di
Description: Parallel port support

Package: load-cdrom
Status: install ok installed
Version: 1.12
Depends: cdebconf-udeb, cdrom-retriever, anna (>= 1.07)
Description: Load installer components from CD
Installer-Menu-Item: 16

Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.108
Depends: cdebconf-udeb, libc6 (>= 2.3.6-6)
Description: Plain text frontend for Debian Configuration Management System

Package: firewire-core-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.17-2-486-di, kernel-image-2.6.17-2-486-di
Description: Core FireWire drivers

Package: iso-3166-udeb
Status: install ok installed
Version: 0.57-1
Description: provides iso_3166.tab file

Package: floppy-retriever
Status: install ok unpacked
Version: 1.11
Provides: retriever
Depends: cdebconf-udeb, mountfloppy
Description: Fetches modules from a floppy

Package: ethdetect
Status: install ok installed
Version: 1.43
Provides: ethernet-card-detection
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 18

Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-3
Depends: libc6 (>= 2.3.6-6)
Description: Tiny utilities for the debian-installer

Package: initrd-preseed
Status: install ok unpacked
Version: 1.20
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd

Package: archdetect
Status: install ok installed
Version: 1.43
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45)
Description: Hardware architecture detector

Package: cdrom-core-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: cdrom-core-modules
Depends: kernel-image-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di, ide-modules-2.6.17-2-486-di
Description: CDROM support

Package: di-utils-reboot
Status: install ok unpacked
Version: 1.38
Depends: cdebconf-udeb
Description: Reboot
Installer-Menu-Item: 995

Package: anna
Status: install ok installed
Version: 1.25
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do

Package: libsysfs2-udeb
Status: install ok unpacked
Version: 2.0.0-7
Provides: libsysfs2
Depends: libc6 (>= 2.3.6-6)
Description: interface library to sysfs

Package: pcmciautils-udeb
Status: install ok unpacked
Version: 014-2
Depends: udev-udeb, libc6 (>= 2.3.6-6), libsysfs2-udeb
Description: PCMCIA utilities for Linux 2.6

Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.4~pre4-1
Depends: libc6 (>= 2.3.6-6)
Description: Linux PCI Utilities (udeb)

Package: console-keymaps-at
Status: install ok installed
Version: 2:1.01-1
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards

Package: usb-storage-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: usb-storage-modules
Depends: ide-core-modules-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di
Description: USB storage support

Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.38
Description: Terminfo entries needed by newt/slang in debian installer

Package: hw-detect
Status: install ok installed
Version: 1.43
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it

Package: kbd-chooser
Status: install ok installed
Version: 1.31
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12

Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.45
Depends: libc6 (>= 2.3.6-6)
Description: Library of common debian-installer functions

Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale

Package: env-preseed
Status: install ok unpacked
Version: 1.20
Description: debconf preseeding via environment variables

Package: mountfloppy
Status: install ok unpacked
Version: 0.8
Depends: cdebconf-udeb, di-utils (>= 1.15)
Description: Mounts a floppy

Package: cdebconf-priority
Status: install ok unpacked
Version: 0.108
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930

Package: fat-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: fat-modules
Depends: kernel-image-2.6.17-2-486-di
Description: FAT filesystem support

Package: netcfg
Status: install ok installed
Version: 1.31
Provides: configured-network
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Description: Configure the network
Installer-Menu-Item: 18

Package: file-preseed
Status: install ok unpacked
Version: 1.20
Depends: cdebconf-udeb, di-utils, preseed-common
Description: load debconf preseed file
Installer-Menu-Item: 14

Package: sata-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: sata-modules
Depends: kernel-image-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di
Description: SATA drivers

Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.108
Depends: libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)

Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.5
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal

Package: ide-modules-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: ide-modules
Depends: kernel-image-2.6.17-2-486-di, ide-core-modules-2.6.17-2-486-di
Description: IDE drivers

Package: cdrom-detect
Status: install ok installed
Version: 1.18
Depends: cdebconf-udeb, hw-detect, di-utils (>= 1.33)
Description: Detect CDROM devices and mount the CD
Installer-Menu-Item: 13

Package: kernel-image-2.6.17-2-486-di
Status: install ok unpacked
Version: 1.37
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer

Package: debian-installer
Status: install ok installed
Version: cdrom-isolinux-20061026
Description: debian installation image

Package: apt-cdrom-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 44
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: cdrom-detect, cdebconf-udeb
Provides: apt-mirror-setup
Description: set up a CD in sources.list

Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 152
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: choose-mirror-bin, cdebconf-udeb
Description: set up a mirror in sources.list

Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: apt-mirror-setup, base-installer (>= 1.49), cdebconf-udeb
Description: Configure apt
Installer-Menu-Item: 70

Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 596
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.68
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19)
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65

Package: choose-mirror-bin
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 272
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.08
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
Description: Choose mirror to install from (program)

Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 72
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.12
Depends: cdebconf-udeb, os-prober, tzsetup-udeb
Description: set up clock
Installer-Menu-Item: 62

Package: crc-modules-2.6.17-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: crc-modules
Description: CRC modules
 This package contains CRC support modules.

Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 168
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3
Depends: libc6 (>= 2.3.5-1), mounted-partitions
Description: Bootstrap the Debian system
 debootstrap is used to create a Debian base system from scratch,
 without requiring the availability of dpkg or apt. It does this by
 downloading .deb files from a mirror site, and carefully unpacking them
 into a directory which can eventually be chrooted into.
 .
 debootstrap-udeb is a minimal package used by debian-installer.

Package: dhcp-client-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 100
Maintainer: Eloy A. Paris <peloy@debian.org>
Version: 2.0pl5-19.4
Depends: libc6 (>= 2.3.5-1)
Description: DHCP Client for debian-installer
 dhcp-client-udeb is a minimal dhcp package used by the debian-installer.

Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.38
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45)
Description: mapdevfs utility for the debian installer

Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 60
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.43
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35

Package: dmidecode-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 60
Maintainer: Petter Reinholdtsen <pere@debian.org>
Version: 2.8-2
Depends: libc6 (>= 2.3.5-1)
Description: Dump Desktop Management Interface data (udeb)

Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 356
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.10.02+dfsg-2
Depends: libblkid1-udeb, libc6 (>= 2.3.6-6)
Description: stripped-down versions of e2fsprogs, for debian-installer
 This package is an e2fsprogs package built for a reduced size, so that
 it can help to save space in debian-installer.
 .
 Don't attempt to install this package, it has no support for a couple of
 features you surely want.  Anyway it should refuse to install.

Package: elilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 88
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.6
Depends: cdebconf-udeb, base-installer, partconf-find-partitions (>= 1.08), di-utils-mapdevfs, fat-modules, firmware-modules, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install elilo on a hard disk
 This udeb will install elilo on the hard disk.
Installer-Menu-Item: 76

Package: ext3-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 236
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: ext3-modules
Description: EXT3 filesystem support
 This package contains the EXT3 filesystem module for the Linux kernel.

Package: fdisk-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 136
Maintainer: LaMont Jones <lamont@debian.org>
Version: 2.12r-12
Depends: libc6 (>= 2.3.6-6)
Description: Partition a hard drive (manual)
 fdisk package

Package: finish-install
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.5
Depends: cdebconf-udeb, archdetect, base-installer, created-fstab, bootable-system
Provides: prebaseconfig
Description: Finish the installation and reboot
Installer-Menu-Item: 78

Package: grub-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 356
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.19
Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>= 1.15), di-utils-mapdevfs, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install GRUB on a hard disk
Installer-Menu-Item: 73

Package: jfs-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 212
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: jfs-modules
Description: JFS filesystem support
 This package contains the JFS filesystem module for the Linux kernel.

Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 984
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of jfsutils, for debian-installer
 This package is a jfsutils package built for reduced size, so that it
 can help to save space in debian-installer.
 .
 Don't attempt to install this package, it has no support for a couple of
 features you surely want.  Anyway, it should fail to install.

Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 40
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.10.02+dfsg-2
Depends: libc6 (>= 2.3.6-6)
Provides: libblkid1
Description: block device id library
 The blkid library which allows system programs like fsck and
 mount to quickly and easily find block devices by filesystem UUID and
 LABEL.  This allows system administrators to avoid specifiying
 filesystems by hard-coded device names, but via a logical naming
 system instead.
 .
 This is a minimal package for debian-installer.

Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 1584
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6.ds1-7
Provides: libc6, libc-udeb, glibc-2.3.6.ds1-1, glibc-2.3.6-2
Description: GNU C Library: Shared libraries - udeb
 Contains the standard libraries that are used by nearly all programs on
 the system. This package includes shared versions of the standard C library
 and the standard math library, as well as many others.
 .
 This package contains a minimal set of libraries needed for the Debian
 installer.  Do not install it on a normal system.

Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 52
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.08-1
Depends: libc6 (>= 2.3.6-6)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
 This is a udeb, or a microdeb, for the debian-installer.
 .
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but EVMS, software
 raid, and other drivers that create "virtual" block devices.

Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 328
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-2.1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
 GNU Parted is a program that allows you to create, destroy,
 resize, move and copy hard disk partitions. This is useful
 for creating space for new operating systems, reorganising
 disk usage, and copying data to new hard disks. This package
 contains the Parted binary and manual page.
 .
 This package contains libparted, the required shared library
 used by Parted. This is a cut-down package with no normal
 documentation intended to be used in debian-installer.
 .
 Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
 PC98 disklabels/partition tables, as well as a 'loop' (raw
 disk) type which allows use on RAID/LVM. Filesystems which
 are currently fully supported are ext2, ext3, fat (FAT16
 and FAT32), ReiserFS (with libreiserfs) and linux-swap.
 Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
 UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
 but cannot create, resize or check these filesystems yet.
 .
 Note that ReiserFS support is only enabled if you install
 the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
 removed from sarge, ReiserFS support is not compiled in the
 default package.
 .
 The nature of this software means that any bugs could cause
 massive data loss. While there are no known bugs at the moment,
 they could exist, so please back up all important files before
 running it, and do so at your own risk.

Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.10.02+dfsg-2
Depends: libc6 (>= 2.3.6-6)
Provides: libuuid1
Description: universally unique id library
 libuuid generates and parses 128-bit universally unique id's (UUID's),
 using a standard which is blessed by both Microsoft and DCE, and is
 being proposed as an internet standard.  See the internet-draft:
 .
                draft-leach-uuids-guids-01.txt
 .
 for more information.
 .
 This is a minimal package for debian-installer.

Package: lilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.18
Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15), di-utils-mapdevfs, fdisk-udeb, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install LILO on a hard disk
Installer-Menu-Item: 75

Package: loop-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: loop-modules
Description: Loopback filesystem support
 This package contains loopback filesystem support for the Linux kernel.

Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 428
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.06-3
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
 This is a udeb, or a microdeb, for the debian-installer.
 .
 This is LVM2, the rewrite of The Linux Logical Volume Manager.  LVM
 supports enterprise level volume management of disk and disk subsystems
 by grouping arbitrary disks into volume groups. The total capacity of
 volume groups can be allocated to logical volumes, which are accessed as
 regular block devices.

Package: md-modules-2.6.17-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 348
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: md-modules
Description: RAID and LVM support
 This package contains RAID and LVM modules for the Linux kernel.

Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 176
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 2.5.4-1
Depends: libc6 (>= 2.3.6-6)
Description: tool to administer Linux MD arrays (software RAID)
 mdadm is a program that can be used to create, manage, and monitor MD
 arrays (e.g. software RAID, multipath devices).
 .
 mdadm-udeb is a minimal package used by the debian-installer.

Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 384
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.19
Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb (>= 2.5.2), partconf-find-partitions
Description: Configure MD devices
 Use this module to configure the MD devices.

Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 144
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-4
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: User-level tools for ReiserFS filesystems
 This installer module contains the utility to create ReiserFS filesystems.
 .
  Homepage: http://www.namesys.com/

Package: network-preseed
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.20
Depends: cdebconf-udeb, configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21

Package: nic-extra-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 2872
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di, nic-shared-modules-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di, crc-modules-2.6.17-2-486-di
Provides: nic-extra-modules
Description: Rare NIC drivers
 This package contains rare NIC drivers for the Linux kernel.

Package: nic-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 444
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di, nic-shared-modules-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di, firewire-core-modules-2.6.17-2-486-di
Provides: nic-modules
Description: Common NIC drivers
 This package contains common NIC drivers for the Linux kernel.

Package: nic-pcmcia-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 556
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di, nic-shared-modules-2.6.17-2-486-di, nic-extra-modules-2.6.17-2-486-di, pcmcia-modules-2.6.17-2-486-di
Provides: nic-pcmcia-modules
Description: Common PCMCIA NIC drivers
 This package contains common PCMCIA NIC drivers for the Linux kernel.

Package: nic-shared-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: nic-shared-modules
Description: Shared NIC drivers
 This package contains NIC drivers needed by combinations of nic-modules,
 nic-extra-modules, and nic-pcmcia-modules.

Package: nic-usb-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 188
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di, nic-shared-modules-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di
Provides: nic-usb-modules
Description: USB NIC drivers
 This package contains USB network adapter drivers for the Linux kernel.

Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 144
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.13
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
 This package will skip installing a boot-loader
Installer-Menu-Item: 77

Package: ntfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 244
Maintainer: David Martínez Moreno <ender@debian.org>
Version: 1.13.1-4
Depends: libc6 (>= 2.3.6-6)
Provides: ntfstools-udeb
Description: Tools for doing neat things in NTFS partitions from Linux - udeb
 Currently this udeb contains only ntfsresize.

Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 68
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
 This package is to be used by boot loader installers to detect other OSes
 available on a system, in a generic format, which it can then adapt to its
 own configuration format.

Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.19
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45), libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for finding partitions
 Helper program for finding partitions and detecting their size and
 existing file system.

Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 60
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-2.1
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1)
Provides: parted
Description: The GNU Parted disk partition resizing program
 GNU Parted is a program that allows you to create, destroy,
 resize, move and copy hard disk partitions. This is useful
 for creating space for new operating systems, reorganising
 disk usage, and copying data to new hard disks. This package
 contains the Parted binary and manual page.
 .
 This package is similar to the "big" parted package, but has
 less cosmetical features resulting in smaller binary. Intended
 to be used in debian-installer.
 .
 .
 The nature of this software means that any bugs could cause
 massive data loss. While there are no known bugs at the moment,
 they could exist, so please back up all important files before
 running it, and do so at your own risk.

Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 356
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 60
Depends: cdebconf-udeb, di-utils, partman-base, partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)

Package: partman-auto-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 3
Depends: cdebconf-udeb, partman-auto (>= 55), partman-auto-lvm (>= 14), partman-crypto (>= 13), partman-base (>= 87)
Description: Automatically partition storage devices using crypto and LVM

Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 148
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 18
Depends: cdebconf-udeb, partman-base (>= 73), partman-auto (>= 59), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM

Package: partman-auto-raid
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2
Depends: cdebconf-udeb, partman-base, partman-basicfilesystems, partman-ext3, partman-auto (>= 58), partman-md
Description: Allow preseeded RAID installs

Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 848
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 97
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42

Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 576
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 49
Depends: cdebconf-udeb, e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32

Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 124
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 32
Depends: cdebconf-udeb
Provides: partman-method
Description: Basic partition usage methods for partman
 This package provides partman with two methods to use partitions.
 The first is to format the partition.  The second is to keep and use
 the existing data in the partition as it is.

Package: partman-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 856
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 17
Depends: partman-base (>= 87), libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Add to partman support for block device encryption

Package: partman-efi
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 124
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 10
Depends: partman-base
Description: Add to partman support for EFI boot partitions

Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 43
Depends: cdebconf-udeb, e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3

Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 260
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 18
Depends: cdebconf-udeb, jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman

Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 680
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 47
Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb
Description: Adds support for LVM to partman

Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 156
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 30
Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87)
Description: Add to partman support for MD

Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 364
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 44
Depends: ntfsprogs-udeb, cdebconf-udeb
Description: Partitioning operations for partman
 This udeb provides partman with editing operations for creation
 of new partitions, deletion of partitions and initialisation of the
 partition table.

Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 228
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 32
Depends: cdebconf-udeb, mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs

Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 304
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 46
Depends: cdebconf-udeb, partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
 This udeb allows the user to choose how partitions should be used.

Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 30
Depends: cdebconf-udeb, xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs

Package: pcmcia-cs-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 232
Maintainer: Per Olofsson <pelle@debian.org>
Version: 3.2.8-9
Description: PCMCIA Card Services for Linux (udeb)

Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 28
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.10
Depends: cdebconf-udeb, apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70

Package: reiserfs-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 268
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: reiserfs-modules
Description: Reiser filesystem support
 This package contains the Reiser filesystem module for the Linux kernel.

Package: save-logs
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 184
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.23
Depends: cdebconf-udeb
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940

Package: scsi-extra-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1316
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: scsi-modules-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
 This package contains uncommon SCSI drivers for the Linux kernel.
 This includes SCSI RAID drivers, and some of the less common SCSI
 controllers.

Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 292
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.12
Depends: cdebconf-udeb, localechooser
Description: choose timezone
Installer-Menu-Item: 62

Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 336
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.7
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63

Package: wireless-tools-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 28
Maintainer: Guus Sliepen <guus@debian.org>
Version: 28-1
Depends: libc6 (>= 2.3.5-1), libiw28-udeb (>= 28)
Description: Tools for manipulating Linux Wireless Extensions
 This package contains the Wireless tools, used to manipulate the Linux
 Wireless Extensions. The Wireless Extension is an interface allowing you to
 set Wireless LAN specific parameters and get the specific stats.
 .
 This is a udeb of the wireless tools.

Package: xfs-modules-2.6.17-2-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 568
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: xfs-modules
Description: XFS filesystem support
 This package contains the XFS filesystem module for the Linux kernel.

Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 232
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.8.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of xfsprogs, for debian-installer
 This package is an xfsprogs package built for reduced size, so that it
 can help to save space in debian-installer.
 .
 Don't attempt to install this package, it has no support for a couple of
 features you surely want.  Anyway, it should fail to install.

Package: ntfs-modules-2.6.17-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 248
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: ntfs-modules
Description: NTFS filesystem support
 This package contains the NTFS file system module for the Linux kernel.

Package: qnx4-modules-2.6.17-2-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: kernel-image-2.6.17-2-486-di
Provides: qnx4-modules
Description: QNX4 filesystem support
 This package contains the QNX4 filesystem module for the Linux kernel.


-- System Information:
Debian Release: testing/unstable
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.17-2-686
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8)

installation-report depends on no packages.

Versions of packages installation-report recommends:
pn  pciutils                      <none>     (no description available)
ii  reportbug                     3.30       reports bugs in the Debian distrib

-- no debconf information



Reply to: