Bug#394768: marked as done (Once and a while iso-scan dont find an iso on the usbstick (always success second try from menu))
Your message dated Mon, 23 Oct 2006 01:22:17 +0200
with message-id <200610230122.17852.elendil@planet.nl>
and subject line Bug#394768: Once and a while iso-scan dont find an iso on the usbstick (always success second try from menu)
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere. Please contact me immediately.)
Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message ---
Package: installation-reports
Boot method: By usbstick
Image version:
20061021 image from
http://people.debian.org/~joeyh/d-i/images/daily/hd-media/
Date: Same day
Machine: Tested on Dell latitude D400 and also a D600
Processor: Pentium M 1.7
Memory: 1024MB
Output of lspci and lspci -n:
00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O
Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP
Controller (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2
EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81)
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface
Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE
Controller (rev 01)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
AC'97 Modem Controller (rev 01)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250
[Mobility FireGL 9000] (rev 01)
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5702X
Gigabit Ethernet (rev 02)
02:01.0 CardBus bridge: O2 Micro, Inc. OZ711EC1 SmartCardBus Controller
(rev 20)
02:01.1 CardBus bridge: O2 Micro, Inc. OZ711EC1 SmartCardBus Controller
(rev 20)
02:03.0 Network controller: Broadcom Corporation BCM4309 802.11a/b/g
(rev 02)
00:00.0 0600: 8086:3340 (rev 03)
00:01.0 0604: 8086:3341 (rev 03)
00:1d.0 0c03: 8086:24c2 (rev 01)
00:1d.1 0c03: 8086:24c4 (rev 01)
00:1d.2 0c03: 8086:24c7 (rev 01)
00:1d.7 0c03: 8086:24cd (rev 01)
00:1e.0 0604: 8086:2448 (rev 81)
00:1f.0 0601: 8086:24cc (rev 01)
00:1f.1 0101: 8086:24ca (rev 01)
00:1f.5 0401: 8086:24c5 (rev 01)
00:1f.6 0703: 8086:24c6 (rev 01)
01:00.0 0300: 1002:4c66 (rev 01)
02:00.0 0200: 14e4:16a6 (rev 02)
02:01.0 0607: 1217:7113 (rev 20)
02:01.1 0607: 1217:7113 (rev 20)
02:03.0 0280: 14e4:4324 (rev 02)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [ ]
Config network: [ ]
Detect CD: [ ]
Load installer modules: [O]
Detect hard drives: [ ]
Partition hard drives: [ ]
Create file systems: [ ]
Mount partitions: [ ]
Install base system: [ ]
Install boot loader: [ ]
Reboot: [ ]
Comments/Problems:
Doing tests with automatic installs and preseed files
I found that when using the hd-media usb bootimage theres trouble
with som usbsticks.
Once and a while the iso-scan doesnt work, but always when doing it
again (from the menu) it succesfully finds the iso. (Different sticks),
seems like some function is too quick maybe ?
regards
//Peter
--
bitrunner
0708-460260
Andra Långgatan 28
41327 Göteborg
Sweden
--- End Message ---
--- Begin Message ---
Version: 1.17
On Monday 23 October 2006 00:32, Peter Skogström wrote:
> Comments/Problems:
> Once and a while the iso-scan doesnt work, but always when doing it
> again (from the menu) it succesfully finds the iso. (Different sticks),
> seems like some function is too quick maybe ?
This was fixed by Joey Hess in iso-scan with this comment:
| This was broken in the most recent version is iso-scan, I think I've
| fixed its delayed rescanning code to work again.
Thanks again.
If you have a chance to check for these issues again in about two days,
that would be most welcome. You can still follow up to these reports by
mailing to <bugnumber>@bugs.debian.org
--- End Message ---
Reply to: