Bug#394768: Once and a while iso-scan dont find an iso on the usbstick (always success second try from menu)
Package: installation-reports
Boot method: By usbstick
Image version:
20061021 image from
http://people.debian.org/~joeyh/d-i/images/daily/hd-media/
Date: Same day
Machine: Tested on Dell latitude D400 and also a D600
Processor: Pentium M 1.7
Memory: 1024MB
Output of lspci and lspci -n:
00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O
Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP
Controller (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2
EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81)
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface
Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE
Controller (rev 01)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
AC'97 Modem Controller (rev 01)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250
[Mobility FireGL 9000] (rev 01)
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5702X
Gigabit Ethernet (rev 02)
02:01.0 CardBus bridge: O2 Micro, Inc. OZ711EC1 SmartCardBus Controller
(rev 20)
02:01.1 CardBus bridge: O2 Micro, Inc. OZ711EC1 SmartCardBus Controller
(rev 20)
02:03.0 Network controller: Broadcom Corporation BCM4309 802.11a/b/g
(rev 02)
00:00.0 0600: 8086:3340 (rev 03)
00:01.0 0604: 8086:3341 (rev 03)
00:1d.0 0c03: 8086:24c2 (rev 01)
00:1d.1 0c03: 8086:24c4 (rev 01)
00:1d.2 0c03: 8086:24c7 (rev 01)
00:1d.7 0c03: 8086:24cd (rev 01)
00:1e.0 0604: 8086:2448 (rev 81)
00:1f.0 0601: 8086:24cc (rev 01)
00:1f.1 0101: 8086:24ca (rev 01)
00:1f.5 0401: 8086:24c5 (rev 01)
00:1f.6 0703: 8086:24c6 (rev 01)
01:00.0 0300: 1002:4c66 (rev 01)
02:00.0 0200: 14e4:16a6 (rev 02)
02:01.0 0607: 1217:7113 (rev 20)
02:01.1 0607: 1217:7113 (rev 20)
02:03.0 0280: 14e4:4324 (rev 02)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [ ]
Config network: [ ]
Detect CD: [ ]
Load installer modules: [O]
Detect hard drives: [ ]
Partition hard drives: [ ]
Create file systems: [ ]
Mount partitions: [ ]
Install base system: [ ]
Install boot loader: [ ]
Reboot: [ ]
Comments/Problems:
Doing tests with automatic installs and preseed files
I found that when using the hd-media usb bootimage theres trouble
with som usbsticks.
Once and a while the iso-scan doesnt work, but always when doing it
again (from the menu) it succesfully finds the iso. (Different sticks),
seems like some function is too quick maybe ?
regards
//Peter
--
bitrunner
0708-460260
Andra Långgatan 28
41327 Göteborg
Sweden
Reply to: