Your message dated Sun, 22 Oct 2006 23:09:30 +0200 with message-id <20061022210930.GF1598@gpm.stappers.nl> and subject line Bug#394743: Installation-report: Several minor problems during installation has caused the attached Bug report to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what I am talking about this indicates a serious mail system misconfiguration somewhere. Please contact me immediately.) Debian bug tracking system administrator (administrator, Debian Bugs database)
--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: Installation-report: Several minor problems during installation
- From: Patrick Häcker <pat_h@web.de>
- Date: Sun, 22 Oct 2006 21:49:06 +0200
- Message-id: <[🔎] 200610222149.16531.pat_h@web.de>
Subject: Installation-report: Several minor problems during installation Package: installation-reports Version: 2.20 Severity: normal *** Please type your report below this line *** -- Package-specific info: Boot method: Existing ReiserFS partition using Grub Image version: 21. Oct 06, http://people.debian.org/~joeyh/d-i/images/daily/hd-media/gtk/ Date: 21. Oct 06 Machine: self built Processor: AMD Athlon(tm) XP 1800+ Memory: 768 MB Partitions: (only relevant ones listed using fdisk -l) /dev/hda1 * 1 383 3076416 b W95 FAT32 /dev/hda2 384 5473 40885425 f W95 Ext'd (LBA) /dev/hda5 384 830 3590496 b W95 FAT32 /dev/hdc2 620 1032 3317422+ 83 Linux Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [ ] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [E] Install boot loader: [E] Reboot: [O] Comments/Problems: Overall setup went fine, but there were several minor problems: - With a German setup there are no umlauts in the output of console 4. Instead of the umlaut built by "ae" (an "a" with 2 dots above) the computer prints an upper case "A" folled by a character which looks like a filled square. After the installation (reboot) the umlauts worked in the console. - I installed the desktop task on a 2.4 GB partition, which was too small so the installation stopped after downloading all packages and installing most of them. This is quite frustrating if you have a slow internet connection. It should be possible to estimate the necessary partition size after choosing tasks and abort or at least print a warning message if the available space is too small. - Having a not big enough partition and unused diskspace directly in front of the partition I switched to another console and startet "parted" after the installation has aborted. But "parted" wasn't able to resize the ext3 partition created by the debian installer some minutes ago. Error Message: "Error: File System has an incompatible feature enabled". It would be quite handy if the parted version in the debian installer could handle the partition created by the debian installer, wouldn't it? So I had to go back to partitioning and choose a larger partition. There was no reboot necessary, which is great! - I didn't choose a swap partition as I have 768 MB RAM. But debian installer printed a warning like: "You could get problems during installation if you don't have enough memory". This sounds like the debian installer would have no idea how much memory in my system is installed, which is definetely not the case and I'm quite sure you know how much memory D-I needs, so please only print this warning message if the user doesn't create a swap partition AND has not enough memory, as a normal user could get confused by this message. - grub did not detect my Debian Sarge installation on /dev/hdc1 (reiserfs). - grub detected my installed Windows 98 (/dev/hda1) and Windows 2000 (/dev/hda5) (huh, these were dark times!), but failed to name the Windows 98 partition correctly. To understand my point you first have to know the following: Windows 2000 installed its boot manager in the Windows 98 partition. So I used to have two boot managers, grub in /dev/hda where I can choose between Debian and Windows (=/dev/hda1). If I choose Windows there appears the Windows boot manager where I can choose between Windows 98. I know this is not the easiest way, but it's the default, which Woody and Sarge created. Grub named my two Windows partitions like this: /dev/hda1: Windows 2000 /dev/hda5: Microsoft Windows 2000 Professional This is misleading as /dev/hda1 contains a Windows 98. The fact that there is a Windows 2000 bootloader on this partition, where you can boot Windows 2000 on /dev/hda5 is not important, as Grub detected /dev/hda5 so I would choose /dev/hda1 really only if I wanted to boot Windows 98. But as I checked: Booting /dev/hda5 out of grub doesn't work. All the following observations propably don't affect D-I but I don't know where to report it. So please forward it to the correct package or point me to the desired place. - During installation one has to create a normal user (let's call him "U") and set an installation language (let's call it "L"). Wouldn't it be a nearly perfect guess if you assume that "A" should have "L" as the default language in Gnome if the desktop task gets installed as well? I know you want to have English as the default language for newly created users as default, which makes sense on servers, but if you set "L" for "U" in Gnome you have an advantage on desktop usage without having disadvantages on servers, as all other newly created users could get English as default anyway. - the X-server didn't recognize the refresh rates of my CRT so I was welcomed by 60 Hz. Changing /etc/X11/xorg.conf and restarting the X-server solved the problem, but not everyone knows how to do this. I have a 17" "Spectrum 7Glr" from "AOC". The correct values are: HorizSync 31.5-82 VertRefresh 50-90 I also wouldn't recommend the 1280x1024 resolution (although correctly recognized) as it's quite unfocused - better use 1024x768 as default with this monitor. - The first time I logged off from Gnome, Gnome hang during logging off and I had to restart the X-server. I couldn't reproduce the problem, though. - Opening the PDF file http://books.google.de/books/pdf/Romeo_and_Juliet.pdf?vid=OCLC09825959&id=izgALQkNvwwC&output=pdf&sig=7MH9MQDD_sC2laq10ayuefDYnII and selecting page 3 crashs Evince reproducible. I don't know if the PDF file is ok. Evince shouldn't crash but print out an error if the file is corrupt. - There is a obscure behavior: Being in the Etch gnome-terminal and using "ssh" to connect to a Sarge computer and using "vi" on this remote computer the umlauts do not work correctly. I wrote the corresponding umlauts to "ae,oe,ue,Ae,Oe,Ue", but vi writes them as "À ,ö ,ÃŒ ,~D ,~V ,~\ ". Lower case letters are wrong as well, as I didn't insert the space characters. This bug does not occur if the command shell or nano on the remote Sarge is used, there the umlauts are correct. This bug does not occur if the local "vi" of Etch is used, there the umlauts are correct. This bug does not occur if I am in a Sarge "konsole" and connect to this remote Sarge computer and use vi. Possibly this behavior has something to do with $LANG="de_DE.UTF-8" on the Etch-System, as the Sarge systems use de_DE@euro. - There really should a Flash plugin getting installed if one selects the desktop task. I guess the best would be fixing the RC bugs of gnash and putting it in the desktop task. - There really should a Java plugin getting installed if one selects the desktop task. java-gcj-compat-plugin handles some Java applets correctly, which is better than having no Java applets at all for most users. - I really looked forward to see Eclipse in Etch, as it is quite some time in the archive now. It would be really cool if you could fix the last RC bugs and get Etch in testing. -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Once you have filled out this report, mail it to submit@bugs.debian.org. ============================================== Installer lsb-release: ============================================== DISTRIB_ID=Debian DISTRIB_DESCRIPTION="Debian GNU/Linux installer" DISTRIB_RELEASE="3.1 (installer build 20061020)" X_INSTALLATION_MEDIUM=netboot ============================================== Installer hardware-summary: ============================================== umame -a: Linux mmm 2.6.17-2-486 #1 Wed Sep 13 15:56:30 UTC 2006 i686 unknown lspci -v -t: -[0000:00]-+-00.0 VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333] lspci -v -t: +-01.0-[0000:01]----00.0 NVidia / SGS Thomson (Joint Venture) Riva128 lspci -v -t: +-0a.0 Creative Labs SB Live! EMU10k1 lspci -v -t: +-0a.1 Creative Labs SB Live! Game Port lspci -v -t: +-11.0 VIA Technologies, Inc. VT8233A ISA Bridge lspci -v -t: +-11.1 VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE lspci -v -t: +-11.2 VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller lspci -v -t: +-11.3 VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller lspci -v -t: +-13.0 Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ lspci -v -t: +-14.0 VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller lspci -v -t: +-14.1 VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller lspci -v -t: \-14.2 VIA Technologies, Inc. USB 2.0 lspci -n: 00:00.0 0600: 1106:3099 lspci -n: 00:01.0 0604: 1106:b099 lspci -n: 00:0a.0 0401: 1102:0002 (rev 04) lspci -n: 00:0a.1 0980: 1102:7002 (rev 01) lspci -n: 00:11.0 0601: 1106:3147 lspci -n: 00:11.1 0101: 1106:0571 (rev 06) lspci -n: 00:11.2 0c03: 1106:3038 (rev 23) lspci -n: 00:11.3 0c03: 1106:3038 (rev 23) lspci -n: 00:13.0 0200: 10ec:8139 (rev 10) lspci -n: 00:14.0 0c03: 1106:3038 (rev 50) lspci -n: 00:14.1 0c03: 1106:3038 (rev 50) lspci -n: 00:14.2 0c03: 1106:3104 (rev 51) lspci -n: 01:00.0 0300: 12d2:0018 (rev 10) lspci -v: 00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333] lspci -v: Subsystem: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333] lspci -v: Flags: bus master, 66MHz, medium devsel, latency 0 lspci -v: Memory at e0000000 (32-bit, prefetchable) [size=256M] lspci -v: Capabilities: [a0] AGP version 2.0 lspci -v: Capabilities: [c0] Power Management version 2 lspci -v: lspci -v: 00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP] lspci -v: Flags: bus master, 66MHz, medium devsel, latency 0 lspci -v: Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 lspci -v: Memory behind bridge: dd600000-dfefffff lspci -v: Prefetchable memory behind bridge: db400000-dd4fffff lspci -v: Capabilities: [80] Power Management version 2 lspci -v: lspci -v: 00:0a.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 04) lspci -v: Subsystem: Creative Labs Unknown device 0020 lspci -v: Flags: bus master, medium devsel, latency 32, IRQ 10 lspci -v: I/O ports at e800 [size=32] lspci -v: Capabilities: [dc] Power Management version 1 lspci -v: lspci -v: 00:0a.1 Input device controller: Creative Labs SB Live! Game Port (rev 01) lspci -v: Subsystem: Creative Labs Unknown device 0020 lspci -v: Flags: bus master, medium devsel, latency 32 lspci -v: I/O ports at e400 [size=8] lspci -v: Capabilities: [dc] Power Management version 1 lspci -v: lspci -v: 00:11.0 ISA bridge: VIA Technologies, Inc. VT8233A ISA Bridge lspci -v: Subsystem: VIA Technologies, Inc. VT8233A ISA Bridge lspci -v: Flags: bus master, stepping, medium devsel, latency 0 lspci -v: Capabilities: [c0] Power Management version 2 lspci -v: lspci -v: 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP]) lspci -v: Subsystem: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE lspci -v: Flags: bus master, medium devsel, latency 32, IRQ 255 lspci -v: I/O ports at fc00 [size=16] lspci -v: Capabilities: [c0] Power Management version 2 lspci -v: lspci -v: 00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 23) lspci -v: Subsystem: VIA Technologies, Inc. (Wrong ID) Unknown device 1234 lspci -v: Flags: bus master, medium devsel, latency 32, IRQ 177 lspci -v: I/O ports at e000 [size=32] lspci -v: Capabilities: [80] Power Management version 2 lspci -v: lspci -v: 00:11.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 23) lspci -v: Subsystem: VIA Technologies, Inc. (Wrong ID) Unknown device 1234 lspci -v: Flags: bus master, medium devsel, latency 32, IRQ 177 lspci -v: I/O ports at dc00 [size=32] lspci -v: Capabilities: [80] Power Management version 2 lspci -v: lspci -v: 00:13.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) lspci -v: Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ lspci -v: Flags: bus master, medium devsel, latency 32, IRQ 169 lspci -v: I/O ports at d800 [size=256] lspci -v: Memory at dfffff00 (32-bit, non-prefetchable) [size=256] lspci -v: Capabilities: [50] Power Management version 2 lspci -v: lspci -v: 00:14.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50) lspci -v: Subsystem: VIA Technologies, Inc. (Wrong ID) Unknown device 1234 lspci -v: Flags: bus master, medium devsel, latency 32, IRQ 185 lspci -v: I/O ports at d400 [size=32] lspci -v: Capabilities: [80] Power Management version 2 lspci -v: lspci -v: 00:14.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50) lspci -v: Subsystem: VIA Technologies, Inc. (Wrong ID) Unknown device 1234 lspci -v: Flags: bus master, medium devsel, latency 32, IRQ 193 lspci -v: I/O ports at d000 [size=32] lspci -v: Capabilities: [80] Power Management version 2 lspci -v: lspci -v: 00:14.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51) (prog-if 20) lspci -v: Subsystem: VIA Technologies, Inc. (Wrong ID) Unknown device 1234 lspci -v: Flags: bus master, medium devsel, latency 32, IRQ 169 lspci -v: Memory at dffffe00 (32-bit, non-prefetchable) [size=256] lspci -v: Capabilities: [80] Power Management version 2 lspci -v: lspci -v: 01:00.0 VGA compatible controller: NVidia / SGS Thomson (Joint Venture) Riva128 (rev 10) lspci -v: Subsystem: Diamond Multimedia Systems Unknown device 1092 lspci -v: Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 11 lspci -v: Memory at de000000 (32-bit, non-prefetchable) [size=16M] lspci -v: Memory at dc000000 (32-bit, prefetchable) [size=16M] lspci -v: Expansion ROM at df800000 [disabled] [size=4M] lspci -v: Capabilities: [44] AGP version 1.0 lspci -v: lspci -x: 00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333] lspci -x: 00: 06 11 99 30 06 00 30 22 00 00 00 06 00 00 00 00 lspci -x: 10: 08 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00 lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 99 30 lspci -x: 30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00 lspci -x: lspci -x: 00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP] lspci -x: 00: 06 11 99 b0 07 01 30 22 00 00 04 06 00 00 01 00 lspci -x: 10: 00 00 00 00 00 00 00 00 00 01 01 00 f0 00 00 00 lspci -x: 20: 60 dd e0 df 40 db 40 dd 00 00 00 00 00 00 00 00 lspci -x: 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 0c 00 lspci -x: lspci -x: 00:0a.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 04) lspci -x: 00: 02 11 02 00 05 00 90 02 04 00 01 04 00 20 80 00 lspci -x: 10: 01 e8 00 00 00 00 00 00 00 00 00 00 00 00 00 00 lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 11 20 00 lspci -x: 30: 00 00 00 00 dc 00 00 00 00 00 00 00 0a 01 02 14 lspci -x: lspci -x: 00:0a.1 Input device controller: Creative Labs SB Live! Game Port (rev 01) lspci -x: 00: 02 11 02 70 05 00 90 02 01 00 80 09 00 20 80 00 lspci -x: 10: 01 e4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 11 20 00 lspci -x: 30: 00 00 00 00 dc 00 00 00 00 00 00 00 00 00 00 00 lspci -x: lspci -x: 00:11.0 ISA bridge: VIA Technologies, Inc. VT8233A ISA Bridge lspci -x: 00: 06 11 47 31 87 00 10 02 00 00 01 06 00 00 80 00 lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 47 31 lspci -x: 30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 lspci -x: lspci -x: 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) lspci -x: 00: 06 11 71 05 07 00 90 02 06 8a 01 01 00 20 00 00 lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 lspci -x: 20: 01 fc 00 00 00 00 00 00 00 00 00 00 06 11 71 05 lspci -x: 30: 00 00 00 00 c0 00 00 00 00 00 00 00 ff 01 00 00 lspci -x: lspci -x: 00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 23) lspci -x: 00: 06 11 38 30 07 00 10 02 23 00 03 0c 08 20 00 00 lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 lspci -x: 20: 01 e0 00 00 00 00 00 00 00 00 00 00 25 09 34 12 lspci -x: 30: 00 00 00 00 80 00 00 00 00 00 00 00 01 04 00 00 lspci -x: lspci -x: 00:11.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 23) lspci -x: 00: 06 11 38 30 07 00 10 02 23 00 03 0c 08 20 00 00 lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 lspci -x: 20: 01 dc 00 00 00 00 00 00 00 00 00 00 25 09 34 12 lspci -x: 30: 00 00 00 00 80 00 00 00 00 00 00 00 01 04 00 00 lspci -x: lspci -x: 00:13.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) lspci -x: 00: ec 10 39 81 07 00 90 02 10 00 00 02 00 20 00 00 lspci -x: 10: 01 d8 00 00 00 ff ff df 00 00 00 00 00 00 00 00 lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 ec 10 39 81 lspci -x: 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 20 40 lspci -x: lspci -x: 00:14.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50) lspci -x: 00: 06 11 38 30 07 00 10 02 50 00 03 0c 08 20 80 00 lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 lspci -x: 20: 01 d4 00 00 00 00 00 00 00 00 00 00 25 09 34 12 lspci -x: 30: 00 00 00 00 80 00 00 00 00 00 00 00 09 01 00 00 lspci -x: lspci -x: 00:14.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50) lspci -x: 00: 06 11 38 30 07 00 10 02 50 00 03 0c 08 20 80 00 lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 lspci -x: 20: 01 d0 00 00 00 00 00 00 00 00 00 00 25 09 34 12 lspci -x: 30: 00 00 00 00 80 00 00 00 00 00 00 00 01 02 00 00 lspci -x: lspci -x: 00:14.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51) lspci -x: 00: 06 11 04 31 17 00 10 02 51 20 03 0c 10 20 80 00 lspci -x: 10: 00 fe ff df 00 00 00 00 00 00 00 00 00 00 00 00 lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 25 09 34 12 lspci -x: 30: 00 00 00 00 80 00 00 00 00 00 00 00 0a 03 00 00 lspci -x: lspci -x: 01:00.0 VGA compatible controller: NVidia / SGS Thomson (Joint Venture) Riva128 (rev 10) lspci -x: 00: d2 12 18 00 07 00 b0 02 10 00 00 03 00 20 00 00 lspci -x: 10: 00 00 00 de 08 00 00 dc 00 00 00 00 00 00 00 00 lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 92 10 92 10 lspci -x: 30: 00 00 80 df 44 00 00 00 00 00 00 00 0b 01 03 01 lspci -x: lsmod: Module Size Used by lsmod: sd_mod 18448 0 lsmod: nls_iso8859_1 4224 4 lsmod: nls_cp437 5888 0 lsmod: qnx4 10484 0 lsmod: ntfs 184468 0 lsmod: xfs 481140 0 lsmod: reiserfs 210176 1 lsmod: jfs 156124 0 lsmod: ext3 115336 1 lsmod: jbd 45460 1 ext3 lsmod: vfat 11520 0 lsmod: fat 45852 1 vfat lsmod: isofs 31672 0 lsmod: ide_generic 1408 0 [permanent] lsmod: aec62xx 6784 0 [permanent] lsmod: alim15x3 11020 0 [permanent] lsmod: amd74xx 12700 0 [permanent] lsmod: atiixp 5520 0 [permanent] lsmod: cmd64x 10140 0 [permanent] lsmod: cs5520 4608 0 [permanent] lsmod: cs5530 4864 0 [permanent] lsmod: cs5535 4224 0 [permanent] lsmod: cy82c693 4356 0 [permanent] lsmod: hpt34x 4992 0 [permanent] lsmod: it821x 7812 0 [permanent] lsmod: ns87415 4168 0 [permanent] lsmod: opti621 4100 0 [permanent] lsmod: pdc202xx_new 7936 0 [permanent] lsmod: pdc202xx_old 9472 0 [permanent] lsmod: piix 9220 0 [permanent] lsmod: rz1000 2688 0 [permanent] lsmod: sc1200 6656 0 [permanent] lsmod: serverworks 8200 0 [permanent] lsmod: siimage 10752 0 [permanent] lsmod: sis5513 12424 0 [permanent] lsmod: slc90e66 5120 0 [permanent] lsmod: triflex 3712 0 [permanent] lsmod: trm290 3972 0 [permanent] lsmod: usb_storage 69952 0 lsmod: scsi_mod 120840 2 sd_mod,usb_storage lsmod: ide_cd 35104 0 lsmod: cdrom 32288 1 ide_cd lsmod: ide_disk 14976 3 lsmod: via82cxxx 8324 0 [permanent] lsmod: generic 4356 0 [permanent] lsmod: ide_core 107940 30 ide_generic,aec62xx,alim15x3,amd74xx,atiixp,cmd64x,cs5520,cs5530,cs5535,cy82c693,hpt34x,it821x,ns87415,opti621,pdc202xx_new,pdc202xx_old,piix,rz1000,sc1200,serverworks,siimage,sis5513,slc90e66,triflex,trm290,usb_storage,ide_cd,ide_disk,via82cxxx,generic lsmod: rsrc_nonstatic 11904 0 lsmod: pcmcia_core 36368 1 rsrc_nonstatic lsmod: floppy 52868 0 lsmod: vga16fb 11400 2 lsmod: vgastate 7808 1 vga16fb lsmod: usbserial 28136 0 lsmod: usbhid 35040 0 lsmod: usbkbd 6656 0 lsmod: thermal 12680 0 lsmod: processor 21440 1 thermal lsmod: fan 4484 0 lsmod: 8139cp 19328 0 lsmod: uhci_hcd 19464 0 lsmod: ehci_hcd 26888 0 lsmod: 8139too 23680 0 lsmod: mii 5248 2 8139cp,8139too lsmod: usbcore 108544 7 usb_storage,usbserial,usbhid,usbkbd,uhci_hcd,ehci_hcd df: Filesystem 1k-blocks Used Available Use% Mounted on df: tmpfs 388380 460 387920 0% /dev df: tmpfs 388380 460 387920 0% /dev df: tmpfs 388380 460 387920 0% /.dev df: /dev/hdc1 3959808 3512700 447108 89% /mnt/hdc1 df: /dev/ide/host0/bus1/target0/lun0/part2 3265260 2544536 554856 82% /target free: total used free shared buffers free: Mem: 776764 753468 23296 0 49404 free: Swap: 0 0 0 free: Total: 776764 753468 23296 cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 34: cardctl: not found cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 35: cardctl: not found /proc/cpuinfo: processor : 0 /proc/cpuinfo: vendor_id : AuthenticAMD /proc/cpuinfo: cpu family : 6 /proc/cpuinfo: model : 6 /proc/cpuinfo: model name : AMD Athlon(tm) XP 1800+ /proc/cpuinfo: stepping : 2 /proc/cpuinfo: cpu MHz : 1540.083 /proc/cpuinfo: cache size : 256 KB /proc/cpuinfo: fdiv_bug : no /proc/cpuinfo: hlt_bug : no /proc/cpuinfo: f00f_bug : no /proc/cpuinfo: coma_bug : no /proc/cpuinfo: fpu : yes /proc/cpuinfo: fpu_exception : yes /proc/cpuinfo: cpuid level : 1 /proc/cpuinfo: wp : yes /proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow up ts /proc/cpuinfo: bogomips : 3083.22 /proc/cpuinfo: /proc/ioports: 0000-001f : dma1 /proc/ioports: 0020-0021 : pic1 /proc/ioports: 0040-0043 : timer0 /proc/ioports: 0050-0053 : timer1 /proc/ioports: 0060-006f : keyboard /proc/ioports: 0080-008f : dma page reg /proc/ioports: 00a0-00a1 : pic2 /proc/ioports: 00c0-00df : dma2 /proc/ioports: 00f0-00ff : fpu /proc/ioports: 0170-0177 : ide1 /proc/ioports: 01f0-01f7 : ide0 /proc/ioports: 02f8-02ff : serial /proc/ioports: 0376-0376 : ide1 /proc/ioports: 03c0-03df : vga+ /proc/ioports: 03f6-03f6 : ide0 /proc/ioports: 03f8-03ff : serial /proc/ioports: 0800-0803 : PM1a_EVT_BLK /proc/ioports: 0804-0805 : PM1a_CNT_BLK /proc/ioports: 0808-080b : PM_TMR /proc/ioports: 0810-0815 : ACPI CPU throttle /proc/ioports: 0820-0823 : GPE0_BLK /proc/ioports: d000-d01f : 0000:00:14.1 /proc/ioports: d000-d01f : uhci_hcd /proc/ioports: d400-d41f : 0000:00:14.0 /proc/ioports: d400-d41f : uhci_hcd /proc/ioports: d800-d8ff : 0000:00:13.0 /proc/ioports: d800-d8ff : 8139too /proc/ioports: dc00-dc1f : 0000:00:11.3 /proc/ioports: dc00-dc1f : uhci_hcd /proc/ioports: e000-e01f : 0000:00:11.2 /proc/ioports: e000-e01f : uhci_hcd /proc/ioports: e400-e407 : 0000:00:0a.1 /proc/ioports: e800-e81f : 0000:00:0a.0 /proc/ioports: fc00-fc0f : 0000:00:11.1 /proc/ioports: fc00-fc07 : ide0 /proc/ioports: fc08-fc0f : ide1 /proc/iomem: 00000000-0009fbff : System RAM /proc/iomem: 00000000-00000000 : Crash kernel /proc/iomem: 0009fc00-0009ffff : reserved /proc/iomem: 000a0000-000bffff : Video RAM area /proc/iomem: 000c0000-000c7fff : Video ROM /proc/iomem: 000f0000-000fffff : System ROM /proc/iomem: 00100000-2ffeffff : System RAM /proc/iomem: 00100000-0026c0f2 : Kernel code /proc/iomem: 0026c0f3-002f9cef : Kernel data /proc/iomem: 2fff0000-2fff7fff : ACPI Tables /proc/iomem: 2fff8000-2fffffff : ACPI Non-volatile Storage /proc/iomem: db400000-dd4fffff : PCI Bus #01 /proc/iomem: dc000000-dcffffff : 0000:01:00.0 /proc/iomem: dd600000-dfefffff : PCI Bus #01 /proc/iomem: de000000-deffffff : 0000:01:00.0 /proc/iomem: df800000-dfbfffff : 0000:01:00.0 /proc/iomem: dffffe00-dffffeff : 0000:00:14.2 /proc/iomem: dffffe00-dffffeff : ehci_hcd /proc/iomem: dfffff00-dfffffff : 0000:00:13.0 /proc/iomem: dfffff00-dfffffff : 8139too /proc/iomem: e0000000-efffffff : 0000:00:00.0 /proc/iomem: fec00000-fec00fff : reserved /proc/iomem: fee00000-fee00fff : reserved /proc/iomem: fffc0000-ffffffff : reserved /proc/interrupts: CPU0 /proc/interrupts: 0: 795546 IO-APIC-edge timer /proc/interrupts: 1: 3190 IO-APIC-edge i8042 /proc/interrupts: 9: 0 IO-APIC-level acpi /proc/interrupts: 14: 1950 IO-APIC-edge ide0 /proc/interrupts: 15: 181451 IO-APIC-edge ide1 /proc/interrupts: 169: 1359002 IO-APIC-level ehci_hcd:usb1, eth0 /proc/interrupts: 177: 39 IO-APIC-level uhci_hcd:usb2, uhci_hcd:usb3 /proc/interrupts: 185: 42 IO-APIC-level uhci_hcd:usb4 /proc/interrupts: 193: 0 IO-APIC-level uhci_hcd:usb5 /proc/interrupts: NMI: 0 /proc/interrupts: LOC: 795508 /proc/interrupts: ERR: 0 /proc/interrupts: MIS: 0 /proc/meminfo: MemTotal: 776764 kB /proc/meminfo: MemFree: 23272 kB /proc/meminfo: Buffers: 49404 kB /proc/meminfo: Cached: 630520 kB /proc/meminfo: SwapCached: 0 kB /proc/meminfo: Active: 232836 kB /proc/meminfo: Inactive: 470868 kB /proc/meminfo: HighTotal: 0 kB /proc/meminfo: HighFree: 0 kB /proc/meminfo: LowTotal: 776764 kB /proc/meminfo: LowFree: 23272 kB /proc/meminfo: SwapTotal: 0 kB /proc/meminfo: SwapFree: 0 kB /proc/meminfo: Dirty: 5008 kB /proc/meminfo: Writeback: 0 kB /proc/meminfo: Mapped: 28428 kB /proc/meminfo: Slab: 41092 kB /proc/meminfo: CommitLimit: 388380 kB /proc/meminfo: Committed_AS: 27840 kB /proc/meminfo: PageTables: 260 kB /proc/meminfo: VmallocTotal: 515792 kB /proc/meminfo: VmallocUsed: 7176 kB /proc/meminfo: VmallocChunk: 507772 kB /proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41 /proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard" /proc/bus/input/devices: P: Phys=isa0060/serio0/input0 /proc/bus/input/devices: S: Sysfs=/class/input/input0 /proc/bus/input/devices: H: Handlers=kbd /proc/bus/input/devices: B: EV=120013 /proc/bus/input/devices: B: KEY=4 2000000 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe /proc/bus/input/devices: B: MSC=10 /proc/bus/input/devices: B: LED=7 /proc/bus/input/devices: dmidecode: # dmidecode 2.8 dmidecode: SMBIOS 2.3 present. dmidecode: 32 structures occupying 2101 bytes. dmidecode: Table at 0x000F0640. dmidecode: dmidecode: Handle 0x0000, DMI type 0, 20 bytes dmidecode: BIOS Information dmidecode: Vendor: American Megatrends Inc. dmidecode: Version: 07.00T dmidecode: Release Date: 11/05/2002 dmidecode: Address: 0xF0000 dmidecode: Runtime Size: 64 kB dmidecode: ROM Size: 256 kB dmidecode: Characteristics: dmidecode: ISA is supported dmidecode: PCI is supported dmidecode: PNP is supported dmidecode: APM is supported dmidecode: BIOS is upgradeable dmidecode: BIOS shadowing is allowed dmidecode: ESCD support is available dmidecode: Boot from CD is supported dmidecode: Selectable boot is supported dmidecode: BIOS ROM is socketed dmidecode: EDD is supported dmidecode: 5.25"/360 KB floppy services are supported (int 13h) dmidecode: 5.25"/1.2 MB floppy services are supported (int 13h) dmidecode: 3.5"/720 KB floppy services are supported (int 13h) dmidecode: 3.5"/2.88 MB floppy services are supported (int 13h) dmidecode: Print screen service is supported (int 5h) dmidecode: 8042 keyboard services are supported (int 9h) dmidecode: Printer services are supported (int 17h) dmidecode: CGA/mono video services are supported (int 10h) dmidecode: ACPI is supported dmidecode: USB legacy is supported dmidecode: AGP is supported dmidecode: LS-120 boot is supported dmidecode: ATAPI Zip drive boot is supported dmidecode: BIOS boot specification is supported dmidecode: dmidecode: Handle 0x0001, DMI type 1, 25 bytes dmidecode: System Information dmidecode: Manufacturer: dmidecode: Product Name: 7VRXP dmidecode: Version: 1.0 dmidecode: Serial Number: 00000000 dmidecode: UUID: Not Present dmidecode: Wake-up Type: Power Switch dmidecode: dmidecode: Handle 0x0002, DMI type 2, 8 bytes dmidecode: Base Board Information dmidecode: Manufacturer: Gigabyte Technology Co., Ltd. dmidecode: Product Name: 7VRXP dmidecode: Version: 1.0 dmidecode: Serial Number: 00000000 dmidecode: dmidecode: Handle 0x0003, DMI type 3, 17 bytes dmidecode: Chassis Information dmidecode: Manufacturer: dmidecode: Type: Desktop dmidecode: Lock: Not Present dmidecode: Version: dmidecode: Serial Number: dmidecode: Asset Tag: dmidecode: Boot-up State: Unknown dmidecode: Power Supply State: Unknown dmidecode: Thermal State: Unknown dmidecode: Security Status: Unknown dmidecode: OEM Information: 0x00000000 dmidecode: dmidecode: Handle 0x0004, DMI type 4, 32 bytes dmidecode: Processor Information dmidecode: Socket Designation: Socket-A dmidecode: Type: Central Processor dmidecode: Family: Athlon dmidecode: Manufacturer: AMD dmidecode: ID: 62 06 00 00 55 00 00 00 dmidecode: Signature: Family 6, Model 6, Stepping 2 dmidecode: Flags: dmidecode: FPU (Floating-point unit on-chip) dmidecode: DE (Debugging extension) dmidecode: TSC (Time stamp counter) dmidecode: PAE (Physical address extension) dmidecode: Version: AMD Athlon(tm) XP 1800+ dmidecode: Voltage: 1.7 V dmidecode: External Clock: 133 MHz dmidecode: Max Speed: 2133 MHz dmidecode: Current Speed: 1533 MHz dmidecode: Status: Populated, Enabled dmidecode: Upgrade: Slot 1 dmidecode: L1 Cache Handle: 0x0005 dmidecode: L2 Cache Handle: 0x0006 dmidecode: L3 Cache Handle: Not Provided dmidecode: dmidecode: Handle 0x0005, DMI type 7, 19 bytes dmidecode: Cache Information dmidecode: Socket Designation: Internal Cache dmidecode: Configuration: Enabled, Not Socketed, Level 1 dmidecode: Operational Mode: Write Back dmidecode: Location: Internal dmidecode: Installed Size: 128 KB dmidecode: Maximum Size: 128 KB dmidecode: Supported SRAM Types: dmidecode: Synchronous dmidecode: Installed SRAM Type: Synchronous dmidecode: Speed: Unknown dmidecode: Error Correction Type: None dmidecode: System Type: Unified dmidecode: Associativity: 4-way Set-associative dmidecode: dmidecode: Handle 0x0006, DMI type 7, 19 bytes dmidecode: Cache Information dmidecode: Socket Designation: Internal Cache dmidecode: Configuration: Enabled, Not Socketed, Level 2 dmidecode: Operational Mode: Write Back dmidecode: Location: Internal dmidecode: Installed Size: 256 KB dmidecode: Maximum Size: 256 KB dmidecode: Supported SRAM Types: dmidecode: Synchronous dmidecode: Installed SRAM Type: Synchronous dmidecode: Speed: Unknown dmidecode: Error Correction Type: Single-bit ECC dmidecode: System Type: Unified dmidecode: Associativity: 4-way Set-associative dmidecode: dmidecode: Handle 0x0007, DMI type 5, 22 bytes dmidecode: Memory Controller Information dmidecode: Error Detecting Method: 32-bit ECC dmidecode: Error Correcting Capabilities: dmidecode: Single-bit Error Correcting dmidecode: Supported Interleave: One-way Interleave dmidecode: Current Interleave: One-way Interleave dmidecode: Maximum Memory Module Size: 1024 MB dmidecode: Maximum Total Memory Size: 3072 MB dmidecode: Supported Speeds: dmidecode: 70 ns dmidecode: 60 ns dmidecode: Supported Memory Types: dmidecode: Standard dmidecode: FPM dmidecode: EDO dmidecode: Parity dmidecode: ECC dmidecode: SIMM dmidecode: Memory Module Voltage: 3.3 V dmidecode: Associated Memory Slots: 3 dmidecode: 0x0008 dmidecode: 0x0009 dmidecode: 0x000A dmidecode: Enabled Error Correcting Capabilities: dmidecode: Single-bit Error Correcting dmidecode: dmidecode: Handle 0x0008, DMI type 6, 12 bytes dmidecode: Memory Module Information dmidecode: Socket Designation: DIMM1 dmidecode: Bank Connections: 1 0 dmidecode: Current Speed: Unknown dmidecode: Type: DIMM SDRAM dmidecode: Installed Size: 512 MB (Double-bank Connection) dmidecode: Enabled Size: 512 MB (Double-bank Connection) dmidecode: Error Status: OK dmidecode: dmidecode: Handle 0x0009, DMI type 6, 12 bytes dmidecode: Memory Module Information dmidecode: Socket Designation: DIMM2 dmidecode: Bank Connections: 3 2 dmidecode: Current Speed: Unknown dmidecode: Type: DIMM SDRAM dmidecode: Installed Size: 256 MB (Single-bank Connection) dmidecode: Enabled Size: 256 MB (Single-bank Connection) dmidecode: Error Status: OK dmidecode: dmidecode: Handle 0x000A, DMI type 6, 12 bytes dmidecode: Memory Module Information dmidecode: Socket Designation: DIMM3 dmidecode: Bank Connections: 5 4 dmidecode: Current Speed: Unknown dmidecode: Type: Unknown dmidecode: Installed Size: Not Installed dmidecode: Enabled Size: Not Installed dmidecode: Error Status: OK dmidecode: dmidecode: Handle 0x000B, DMI type 9, 13 bytes dmidecode: System Slot Information dmidecode: Designation: PCI1 dmidecode: Type: 32-bit PCI dmidecode: Current Usage: Available dmidecode: Length: Long dmidecode: ID: 1 dmidecode: Characteristics: dmidecode: 3.3 V is provided dmidecode: Opening is shared dmidecode: PME signal is supported dmidecode: dmidecode: Handle 0x000C, DMI type 9, 13 bytes dmidecode: System Slot Information dmidecode: Designation: PCI2 dmidecode: Type: 32-bit PCI dmidecode: Current Usage: In Use dmidecode: Length: Long dmidecode: ID: 2 dmidecode: Characteristics: dmidecode: 3.3 V is provided dmidecode: Opening is shared dmidecode: PME signal is supported dmidecode: dmidecode: Handle 0x000D, DMI type 9, 13 bytes dmidecode: System Slot Information dmidecode: Designation: PCI3 dmidecode: Type: 32-bit PCI dmidecode: Current Usage: Available dmidecode: Length: Long dmidecode: ID: 3 dmidecode: Characteristics: dmidecode: 3.3 V is provided dmidecode: Opening is shared dmidecode: PME signal is supported dmidecode: dmidecode: Handle 0x000E, DMI type 9, 13 bytes dmidecode: System Slot Information dmidecode: Designation: PCI4 dmidecode: Type: 32-bit PCI dmidecode: Current Usage: Available dmidecode: Length: Long dmidecode: ID: 4 dmidecode: Characteristics: dmidecode: 3.3 V is provided dmidecode: Opening is shared dmidecode: PME signal is supported dmidecode: dmidecode: Handle 0x000F, DMI type 9, 13 bytes dmidecode: System Slot Information dmidecode: Designation: PCI5 dmidecode: Type: 32-bit PCI dmidecode: Current Usage: Available dmidecode: Length: Long dmidecode: ID: 5 dmidecode: Characteristics: dmidecode: 3.3 V is provided dmidecode: Opening is shared dmidecode: PME signal is supported dmidecode: dmidecode: Handle 0x0010, DMI type 9, 13 bytes dmidecode: System Slot Information dmidecode: Designation: AGP dmidecode: Type: 32-bit AGP 4x dmidecode: Current Usage: In Use dmidecode: Length: Long dmidecode: ID: 4 dmidecode: Characteristics: dmidecode: 3.3 V is provided dmidecode: Opening is shared dmidecode: PME signal is supported dmidecode: dmidecode: Handle 0x0011, DMI type 10, 6 bytes dmidecode: On Board Device Information dmidecode: Type: Sound dmidecode: Status: Enabled dmidecode: Description: Creative Inc. dmidecode: dmidecode: Handle 0x0012, DMI type 11, 5 bytes dmidecode: OEM Strings dmidecode: String 1: SMBIOS Support from AMI dmidecode: dmidecode: Handle 0x0013, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: COM Port dmidecode: Internal Connector Type: None dmidecode: External Reference Designator: Serial Port A dmidecode: External Connector Type: DB-9 male dmidecode: Port Type: Serial Port 16550A Compatible dmidecode: dmidecode: Handle 0x0014, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: COM Port dmidecode: Internal Connector Type: None dmidecode: External Reference Designator: Serial Port B dmidecode: External Connector Type: DB-9 male dmidecode: Port Type: Serial Port 16550A Compatible dmidecode: dmidecode: Handle 0x0015, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: LPT Port dmidecode: Internal Connector Type: None dmidecode: External Reference Designator: Parallel Port dmidecode: External Connector Type: DB-25 female dmidecode: Port Type: Parallel Port ECP/EPP dmidecode: dmidecode: Handle 0x0016, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: Keyboard dmidecode: Internal Connector Type: None dmidecode: External Reference Designator: Keyboard dmidecode: External Connector Type: PS/2 dmidecode: Port Type: Keyboard Port dmidecode: dmidecode: Handle 0x0017, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: Mouse dmidecode: Internal Connector Type: None dmidecode: External Reference Designator: PS/2 Mouse dmidecode: External Connector Type: PS/2 dmidecode: Port Type: Mouse Port dmidecode: dmidecode: Handle 0x0018, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: Floppy dmidecode: Internal Connector Type: On Board Floppy dmidecode: External Reference Designator: Floppy dmidecode: External Connector Type: None dmidecode: Port Type: None dmidecode: dmidecode: Handle 0x0019, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: Primary IDE dmidecode: Internal Connector Type: On Board IDE dmidecode: External Reference Designator: IDE-1 dmidecode: External Connector Type: None dmidecode: Port Type: None dmidecode: dmidecode: Handle 0x001A, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: Secondary IDE dmidecode: Internal Connector Type: On Board IDE dmidecode: External Reference Designator: IDE-2 dmidecode: External Connector Type: None dmidecode: Port Type: None dmidecode: dmidecode: Handle 0x001B, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: USB Port dmidecode: Internal Connector Type: None dmidecode: External Reference Designator: USB dmidecode: External Connector Type: Access Bus (USB) dmidecode: Port Type: USB dmidecode: dmidecode: Handle 0x001C, DMI type 8, 9 bytes dmidecode: Port Connector Information dmidecode: Internal Reference Designator: USB Port dmidecode: Internal Connector Type: None dmidecode: External Reference Designator: USB dmidecode: External Connector Type: Access Bus (USB) dmidecode: Port Type: USB dmidecode: dmidecode: Handle 0x001D, DMI type 12, 5 bytes dmidecode: System Configuration Options dmidecode: Option 1: System Management BIOS from Atlanta dmidecode: Option 2: SMBIOS from AMI dmidecode: dmidecode: Handle 0x001E, DMI type 13, 22 bytes dmidecode: BIOS Language Information dmidecode: Installable Languages: 1 dmidecode: English dmidecode: Currently Installed Language: Not Specified dmidecode: dmidecode: Handle 0x001F, DMI type 127, 4 bytes dmidecode: End Of Table dmidecode: ============================================== Installer status: ============================================== Package: input-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: input-modules Depends: kernel-image-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di Description: Input devices support Package: acpi-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: acpi-modules Depends: kernel-image-2.6.17-2-486-di Description: ACPI support modules Package: nic-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: nic-modules Depends: kernel-image-2.6.17-2-486-di, nic-shared-modules-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di, firewire-core-modules-2.6.17-2-486-di Description: Common NIC drivers Package: preseed-common Status: install ok installed Version: 1.18 Depends: cdebconf-udeb, di-utils (>= 1.14) Description: common files for preseeding Package: udpkg Status: install ok unpacked Version: 1.04 Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41) Description: tiny dpkg clone Package: localechooser Status: install ok installed Version: 1.27 Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15) Description: choose language/country/locale Installer-Menu-Item: 10 Package: libnss-dns-udeb Status: install ok unpacked Version: 2.3.6.ds1-6 Description: GNU C Library: NSS helper for DNS - udeb Package: download-installer Status: install ok installed Version: 1.11 Depends: net-retriever, anna (>= 1.07) Description: Download installer components Installer-Menu-Item: 23 Package: lowmemcheck Status: install ok unpacked Version: 1.21 Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03) Description: detect low-memory systems and enter lowmem mode Package: main-menu Status: install ok unpacked Version: 1.14 Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb Description: Debian installer main menu Package: di-utils-shell Status: install ok unpacked Version: 1.36 Depends: cdebconf-udeb (>= 0.73), di-utils (>= 1.18) Description: Execute a shell Installer-Menu-Item: 950 Package: usb-serial-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: usb-serial-modules Depends: kernel-image-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di Description: USB serial drivers Package: nic-extra-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: nic-extra-modules Depends: kernel-image-2.6.17-2-486-di, nic-shared-modules-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di, crc-modules-2.6.17-2-486-di Description: Rare NIC drivers Package: di-utils Status: install ok installed Version: 1.36 Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45), cdebconf-udeb (>= 0.97) Description: Miscellaneous utilities for the debian installer Package: usb-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: usb-modules Depends: kernel-image-2.6.17-2-486-di Description: USB support Package: choose-mirror Status: install ok installed Version: 2.07 Depends: cdebconf-udeb, configured-network, choose-mirror-bin Description: Choose mirror to install from (menu item) Installer-Menu-Item: 23 Package: scsi-core-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: scsi-core-modules Depends: kernel-image-2.6.17-2-486-di Description: Core SCSI subsystem Package: network-preseed Status: install ok unpacked Version: 1.18 Depends: cdebconf-udeb, configured-network, preseed-common Description: download debconf preseed file Installer-Menu-Item: 21 Package: crc-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: crc-modules Depends: kernel-image-2.6.17-2-486-di Description: CRC modules Package: cdebconf-newt-udeb Status: install ok unpacked Version: 0.107 Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.6-6), libnewt0.52 Description: Newt frontend for Debian Configuration Management System Package: module-init-tools-udeb Status: install ok unpacked Version: 3.2.2-3 Depends: libc6 (>= 2.3.6-6) Description: tools for managing Linux kernel modules Package: rootskel Status: install ok installed Version: 1.41 Depends: di-utils (>= 1.24), cdebconf-udeb Description: Skeleton root filesystem used by debian-installer Package: firmware-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: firmware-modules Depends: kernel-image-2.6.17-2-486-di Description: Firmware request modules Package: udev-udeb Status: install ok unpacked Version: 0.100-2.1 Depends: libc6 (>= 2.3.6-6) Description: /dev/ and hotplug management daemon Package: fb-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: fb-modules Depends: kernel-image-2.6.17-2-486-di Description: Frame buffer support Package: brltty-udeb Status: install ok unpacked Version: 3.7.2-4 Depends: libc6 (>= 2.3.6-6) Description: Access software for a blind person using a soft braille terminal Package: libfribidi0-udeb Status: install ok unpacked Version: 0.10.7-4 Depends: libc6 (>= 2.3.6-6) Description: Free Implementation of the Unicode BiDi algorithm Package: libtextwrap1-udeb Status: install ok installed Version: 0.1-5 Depends: libc6 (>= 2.3.6-6) Description: text-wrapping library with i18n - runtime udeb Package: pcmcia-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: pcmcia-modules Depends: kernel-image-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di Description: Common PCMCIA drivers Package: auto-install Status: install ok installed Version: 0.01 Depends: netcfg, preseed-common (>= 1.18) Description: support for automatic installs Installer-Menu-Item: 19 Package: usb-discover Status: install ok unpacked Version: 1.05 Description: Discover USB and load kernel modules Package: serial-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: serial-modules Depends: kernel-image-2.6.17-2-486-di, pcmcia-modules-2.6.17-2-486-di Description: Serial drivers Package: rescue-check Status: install ok unpacked Version: 1.6 Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18) Description: enter d-i rescue mode if requested Package: nano-udeb Status: install ok unpacked Version: 1.9.99pre2-1 Provides: editor Depends: libc6 (>= 2.3.6-6), libslang2-udeb (>= 2.0.6-3) Description: free Pico clone with some new features - tiny build Package: cdebconf-udeb Status: install ok installed Version: 0.107 Provides: debconf-2.0 Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45), libtextwrap1-udeb Description: Debian Configuration Management System (C-implementation) Package: ai-choosers Status: install ok unpacked Version: 0.01 Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23) Description: delayed configuration of locale and keyboard for auto-install Installer-Menu-Item: 22 Package: floppy-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: floppy-modules Depends: kernel-image-2.6.17-2-486-di Description: Floppy driver Package: libiw28-udeb Status: install ok installed Version: 28-1 Depends: libc6 (>= 2.3.5-1) Description: Tools for manipulating Linux Wireless Extensions Package: cdebconf-text-udeb Status: install ok unpacked Version: 0.107 Depends: cdebconf-udeb, libc6 (>= 2.3.6-6) Description: Plain text frontend for Debian Configuration Management System Package: firewire-core-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: firewire-core-modules Depends: scsi-core-modules-2.6.17-2-486-di, kernel-image-2.6.17-2-486-di Description: Core FireWire drivers Package: iso-3166-udeb Status: install ok installed Version: 0.56-1 Description: provides iso_3166.tab file Package: floppy-retriever Status: install ok unpacked Version: 1.10 Provides: retriever Depends: cdebconf-udeb, mountfloppy Description: Fetches modules from a floppy Package: ethdetect Status: install ok installed Version: 1.42 Provides: ethernet-card-detection Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13) Description: Detect network hardware and load kernel drivers for it Installer-Menu-Item: 18 Package: busybox-udeb Status: install ok unpacked Version: 1:1.1.3-3 Depends: libc6 (>= 2.3.6-6) Description: Tiny utilities for the debian-installer Package: initrd-preseed Status: install ok unpacked Version: 1.18 Depends: preseed-common Description: load debconf preseed file from /preseed.cfg on the initrd Package: net-retriever Status: install ok installed Version: 1.11 Provides: retriever Depends: choose-mirror, configured-network, di-utils (>= 1.16) Description: Fetch modules from the Internet Package: archdetect Status: install ok installed Version: 1.42 Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.44) Description: Hardware architecture detector Package: nic-pcmcia-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: nic-pcmcia-modules Depends: kernel-image-2.6.17-2-486-di, nic-shared-modules-2.6.17-2-486-di, nic-extra-modules-2.6.17-2-486-di, pcmcia-modules-2.6.17-2-486-di Description: Common PCMCIA NIC drivers Package: save-logs Status: install ok unpacked Version: 2.20 Depends: cdebconf-udeb Description: save logs and configuration for debug purposes Installer-Menu-Item: 940 Package: di-utils-reboot Status: install ok unpacked Version: 1.36 Description: Reboot Installer-Menu-Item: 995 Package: anna Status: install ok installed Version: 1.24 Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), cdebconf-udeb Description: anna's not nearly apt, but for the Debian installer, it will do Package: libsysfs2-udeb Status: install ok unpacked Version: 2.0.0-7 Provides: libsysfs2 Depends: libc6 (>= 2.3.6-6) Description: interface library to sysfs Package: choose-mirror-bin Status: install ok installed Version: 2.07 Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), cdebconf-udeb Description: Choose mirror to install from (program) Package: pcmciautils-udeb Status: install ok unpacked Version: 014-2 Depends: udev-udeb, libc6 (>= 2.3.6-6), libsysfs2-udeb Description: PCMCIA utilities for Linux 2.6 Package: pciutils-udeb Status: install ok unpacked Version: 1:2.2.4~pre4-1 Depends: libc6 (>= 2.3.6-6) Description: Linux PCI Utilities (udeb) Package: console-keymaps-at Status: install ok installed Version: 2:1.0-5 Provides: console-keymaps Depends: cdebconf-udeb Description: Keymaps for PC-style (PS/2 and AT) keyboards Package: di-utils-terminfo Status: install ok unpacked Version: 1.36 Description: Terminfo entries needed by newt/slang in debian installer Package: hw-detect Status: install ok installed Version: 1.42 Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26) Description: Detect hardware and load kernel drivers for it Package: kbd-chooser Status: install ok installed Version: 1.30 Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), cdebconf-udeb, console-keymaps Description: Detect a keyboard and select layout Installer-Menu-Item: 12 Package: libdebian-installer4-udeb Status: install ok installed Version: 0.45 Depends: libc6 (>= 2.3.6-6) Description: Library of common debian-installer functions Package: installation-locale Status: install ok unpacked Version: 1.1 Depends: rootskel Description: UTF-8 C locale Package: nic-shared-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: nic-shared-modules Depends: kernel-image-2.6.17-2-486-di Description: Shared NIC drivers Package: env-preseed Status: install ok unpacked Version: 1.18 Description: debconf preseeding via environment variables Package: mountfloppy Status: install ok unpacked Version: 0.7 Depends: di-utils (>= 1.15) Description: Mounts a floppy Package: cdebconf-priority Status: install ok unpacked Version: 0.107 Depends: cdebconf-udeb Description: Change debconf priority Installer-Menu-Item: 930 Package: fat-modules-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: fat-modules Depends: kernel-image-2.6.17-2-486-di Description: FAT filesystem support Package: netcfg Status: install ok installed Version: 1.30 Provides: configured-network Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.45), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection Description: Configure the network Installer-Menu-Item: 18 Package: dhcp-client-udeb Status: install ok installed Version: 2.0pl5-19.4 Depends: libc6 (>= 2.3.5-1) Description: DHCP Client for debian-installer Package: libdebconfclient0-udeb Status: install ok installed Version: 0.107 Depends: libc6 (>= 2.3.6-6), cdebconf-udeb Description: Debian Configuration Management System (C-implementation) Package: bogl-bterm-udeb Status: install ok unpacked Version: 0.1.18-1.4 Provides: editor Depends: libc-udeb Description: Ben's Own Graphics Library - graphical terminal Package: kernel-image-2.6.17-2-486-di Status: install ok unpacked Version: 1.37 Provides: kernel-image, ext2-modules Description: Linux kernel binary image for the Debian installer Package: debian-installer Status: install ok installed Version: netboot-20061020 Description: debian installation image Package: apt-mirror-setup Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 132 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1:0.15 Depends: choose-mirror-bin, cdebconf-udeb Description: set up a mirror in sources.list Package: apt-setup-udeb Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 96 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1:0.15 Depends: apt-mirror-setup, base-installer (>= 1.49), cdebconf-udeb Description: Configure apt Installer-Menu-Item: 70 Package: base-installer Status: install ok installed Priority: required Section: debian-installer Installed-Size: 580 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.67 Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.44), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19) Provides: kernel-installer Description: Install the base system Installer-Menu-Item: 65 Package: cdrom-core-modules-2.6.17-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 140 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di, ide-modules-2.6.17-2-486-di Provides: cdrom-core-modules Description: CDROM support This package contains core CDROM support for the Linux kernel. Package: clock-setup Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 72 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 0.11 Depends: cdebconf-udeb, os-prober, tzsetup-udeb Description: set up clock Installer-Menu-Item: 62 Package: debootstrap-udeb Status: install ok installed Priority: required Section: debian-installer Installed-Size: 168 Maintainer: Anthony Towns <ajt@debian.org> Version: 0.3.3 Depends: libc6 (>= 2.3.5-1), mounted-partitions Description: Bootstrap the Debian system debootstrap is used to create a Debian base system from scratch, without requiring the availability of dpkg or apt. It does this by downloading .deb files from a mirror site, and carefully unpacking them into a directory which can eventually be chrooted into. . debootstrap-udeb is a minimal package used by debian-installer. Package: dhcp3-client-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 416 Maintainer: Eloy A. Paris <peloy@debian.org> Version: 3.0.4-10 Depends: libc6 (>= 2.3.6-6) Description: DHCP Client for debian-installer dhcp-client-udeb is a minimal dhcp package used by the debian-installer. Package: di-utils-mapdevfs Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 16 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.36 Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45) Description: mapdevfs utility for the debian installer Package: disk-detect Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 64 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.42 Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13) Provides: harddrive-detection Description: Detect disk drives Installer-Menu-Item: 35 Package: dmidecode-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 60 Maintainer: Petter Reinholdtsen <pere@debian.org> Version: 2.8-2 Depends: libc6 (>= 2.3.5-1) Description: Dump Desktop Management Interface data (udeb) Package: e2fsprogs-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 356 Maintainer: Theodore Y. Ts'o <tytso@mit.edu> Version: 1.39+1.40-WIP-2006.10.02+dfsg-1 Depends: libblkid1-udeb, libc6 (>= 2.3.6-6) Description: stripped-down versions of e2fsprogs, for debian-installer This package is an e2fsprogs package built for a reduced size, so that it can help to save space in debian-installer. . Don't attempt to install this package, it has no support for a couple of features you surely want. Anyway it should refuse to install. Package: elilo-installer Status: install ok unpacked Priority: standard Section: debian-installer Installed-Size: 88 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.6 Depends: cdebconf-udeb, base-installer, partconf-find-partitions (>= 1.08), di-utils-mapdevfs, fat-modules, firmware-modules, dmidecode-udeb (>= 2.7) Provides: bootable-system Description: Install elilo on a hard disk This udeb will install elilo on the hard disk. Installer-Menu-Item: 76 Package: ext3-modules-2.6.17-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 236 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di Provides: ext3-modules Description: EXT3 filesystem support This package contains the EXT3 filesystem module for the Linux kernel. Package: fdisk-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 136 Maintainer: LaMont Jones <lamont@debian.org> Version: 2.12r-11 Depends: libc6 (>= 2.3.6-6) Description: Partition a hard drive (manual) fdisk package Package: finish-install Status: install ok unpacked Priority: required Section: debian-installer Installed-Size: 104 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 2.4 Depends: archdetect, base-installer, created-fstab, bootable-system Provides: prebaseconfig Description: Finish the installation and reboot Installer-Menu-Item: 78 Package: grub-installer Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 332 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.18 Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>= 1.15), di-utils-mapdevfs, os-prober, dmidecode-udeb (>= 2.7) Provides: bootable-system Description: Install GRUB on a hard disk Installer-Menu-Item: 73 Package: ide-core-modules-2.6.17-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 144 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di Provides: ide-core-modules Description: IDE support This package contains core IDE support for the Linux kernel. Package: ide-modules-2.6.17-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 420 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di, ide-core-modules-2.6.17-2-486-di Provides: ide-modules Description: IDE drivers This package contains IDE drivers for the Linux kernel. Package: jfs-modules-2.6.17-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 212 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di Provides: jfs-modules Description: JFS filesystem support This package contains the JFS filesystem module for the Linux kernel. Package: jfsutils-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 984 Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de> Version: 1.1.11-1 Depends: libc6 (>= 2.3.6-6), libuuid1-udeb Description: A stripped-down version of jfsutils, for debian-installer This package is a jfsutils package built for reduced size, so that it can help to save space in debian-installer. . Don't attempt to install this package, it has no support for a couple of features you surely want. Anyway, it should fail to install. Package: libblkid1-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 40 Maintainer: Theodore Y. Ts'o <tytso@mit.edu> Version: 1.39+1.40-WIP-2006.10.02+dfsg-1 Depends: libc6 (>= 2.3.6-6) Provides: libblkid1 Description: block device id library The blkid library which allows system programs like fsck and mount to quickly and easily find block devices by filesystem UUID and LABEL. This allows system administrators to avoid specifiying filesystems by hard-coded device names, but via a logical naming system instead. . This is a minimal package for debian-installer. Package: libc6-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 1584 Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org> Version: 2.3.6.ds1-6 Provides: libc6, libc-udeb, glibc-2.3.6.ds1-1, glibc-2.3.6-2 Description: GNU C Library: Shared libraries - udeb Contains the standard libraries that are used by nearly all programs on the system. This package includes shared versions of the standard C library and the standard math library, as well as many others. . This package contains a minimal set of libraries needed for the Debian installer. Do not install it on a normal system. Package: libdevmapper1.02-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 52 Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org> Version: 2:1.02.08-1 Depends: libc6 (>= 2.3.6-6) Provides: libdevmapper1.02 Description: The Linux Kernel Device Mapper userspace library This is a udeb, or a microdeb, for the debian-installer. . The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management) Team's implementation of a minimalistic kernel-space driver that handles volume management, while keeping knowledge of the underlying device layout in user-space. This makes it useful for not only LVM, but EVMS, software raid, and other drivers that create "virtual" block devices. Package: libparted1.7-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 328 Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org> Version: 1.7.1-2.1 Depends: libc6 (>= 2.3.6-6), libuuid1-udeb Provides: libparted1.7-1 Description: The GNU Parted disk partitioning shared library GNU Parted is a program that allows you to create, destroy, resize, move and copy hard disk partitions. This is useful for creating space for new operating systems, reorganising disk usage, and copying data to new hard disks. This package contains the Parted binary and manual page. . This package contains libparted, the required shared library used by Parted. This is a cut-down package with no normal documentation intended to be used in debian-installer. . Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and PC98 disklabels/partition tables, as well as a 'loop' (raw disk) type which allows use on RAID/LVM. Filesystems which are currently fully supported are ext2, ext3, fat (FAT16 and FAT32), ReiserFS (with libreiserfs) and linux-swap. Parted can also detect and remove HFS (Mac OS), JFS, NTFS, UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems, but cannot create, resize or check these filesystems yet. . Note that ReiserFS support is only enabled if you install the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been removed from sarge, ReiserFS support is not compiled in the default package. . The nature of this software means that any bugs could cause massive data loss. While there are no known bugs at the moment, they could exist, so please back up all important files before running it, and do so at your own risk. Package: libuuid1-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 20 Maintainer: Theodore Y. Ts'o <tytso@mit.edu> Version: 1.39+1.40-WIP-2006.10.02+dfsg-1 Depends: libc6 (>= 2.3.6-6) Provides: libuuid1 Description: universally unique id library libuuid generates and parses 128-bit universally unique id's (UUID's), using a standard which is blessed by both Microsoft and DCE, and is being proposed as an internet standard. See the internet-draft: . draft-leach-uuids-guids-01.txt . for more information. . This is a minimal package for debian-installer. Package: lilo-installer Status: install ok unpacked Priority: standard Section: debian-installer Installed-Size: 212 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.17 Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15), di-utils-mapdevfs, fdisk-udeb, os-prober, dmidecode-udeb (>= 2.7) Provides: bootable-system Description: Install LILO on a hard disk Installer-Menu-Item: 75 Package: loop-modules-2.6.17-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 52 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di Provides: loop-modules Description: Loopback filesystem support This package contains loopback filesystem support for the Linux kernel. Package: lvm2-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 428 Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org> Version: 2.02.06-3 Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2) Description: The Linux Logical Volume Manager This is a udeb, or a microdeb, for the debian-installer. . This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM supports enterprise level volume management of disk and disk subsystems by grouping arbitrary disks into volume groups. The total capacity of volume groups can be allocated to logical volumes, which are accessed as regular block devices. Package: md-modules-2.6.17-2-486-di Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 348 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di Provides: md-modules Description: RAID and LVM support This package contains RAID and LVM modules for the Linux kernel. Package: mdadm-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 176 Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org> Version: 2.5.4-1 Depends: libc6 (>= 2.3.6-6) Description: tool to administer Linux MD arrays (software RAID) mdadm is a program that can be used to create, manage, and monitor MD arrays (e.g. software RAID, multipath devices). . mdadm-udeb is a minimal package used by the debian-installer. Package: mdcfg-utils Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 372 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.18 Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb (>= 2.5.2), partconf-find-partitions Description: Configure MD devices Use this module to configure the MD devices. Package: mkreiserfs-udeb Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 144 Maintainer: Ed Boraas <ed@debian.org> Version: 1:3.6.19-4 Depends: libc6 (>= 2.3.6-6), libuuid1-udeb Description: User-level tools for ReiserFS filesystems This installer module contains the utility to create ReiserFS filesystems. . Homepage: http://www.namesys.com/ Package: nic-usb-modules-2.6.17-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 188 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di, nic-shared-modules-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di Provides: nic-usb-modules Description: USB NIC drivers This package contains USB network adapter drivers for the Linux kernel. Package: nobootloader Status: install ok unpacked Priority: standard Section: debian-installer Installed-Size: 112 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.11 Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs Provides: bootable-system Description: Don't install any bootloader. This package will skip installing a boot-loader Installer-Menu-Item: 77 Package: ntfsprogs-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 244 Maintainer: David MartÃnez Moreno <ender@debian.org> Version: 1.13.1-4 Depends: libc6 (>= 2.3.6-6) Provides: ntfstools-udeb Description: Tools for doing neat things in NTFS partitions from Linux - udeb Currently this udeb contains only ntfsresize. Package: os-prober-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 68 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.14 Depends: di-utils-mapdevfs, anna (>= 1.16) Provides: os-prober Description: utility to detect other OSes on a set of drives This package is to be used by boot loader installers to detect other OSes available on a system, in a generic format, which it can then adapt to its own configuration format. Package: parport-modules-2.6.17-2-486-di Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 116 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di Provides: parport-modules Description: Parallel port support This package contains parallel port drivers for the Linux kernel. Package: partconf-find-partitions Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 12 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.18 Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45), libparted1.7-udeb (>= 1.7.1-1) Description: debian-installer utility for finding partitions Helper program for finding partitions and detecting their size and existing file system. Package: parted-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 60 Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org> Version: 1.7.1-2.1 Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1) Provides: parted Description: The GNU Parted disk partition resizing program GNU Parted is a program that allows you to create, destroy, resize, move and copy hard disk partitions. This is useful for creating space for new operating systems, reorganising disk usage, and copying data to new hard disks. This package contains the Parted binary and manual page. . This package is similar to the "big" parted package, but has less cosmetical features resulting in smaller binary. Intended to be used in debian-installer. . . The nature of this software means that any bugs could cause massive data loss. While there are no known bugs at the moment, they could exist, so please back up all important files before running it, and do so at your own risk. Package: partman-auto Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 624 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 59 Depends: cdebconf-udeb, di-utils, partman-base, partman-basicfilesystems, partman-ext3 Description: Automatically partition storage devices (partman) Package: partman-auto-crypto Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 44 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 2 Depends: cdebconf-udeb, partman-auto (>= 55), partman-auto-lvm (>= 14), partman-crypto (>= 13), partman-base (>= 87) Description: Automatically partition storage devices using crypto and LVM Package: partman-auto-lvm Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 144 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 17 Depends: cdebconf-udeb, partman-base (>= 73), partman-auto (>= 59), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb Description: Automatically partition storage devices using LVM Package: partman-auto-raid Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 52 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1 Depends: cdebconf-udeb, partman-base, partman-basicfilesystems, partman-ext3, partman-auto (>= 58), partman-md Description: Allow preseeded RAID installs Package: partman-base Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 868 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 96 Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15) Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab Description: Partition the storage devices (partman) Installer-Menu-Item: 42 Package: partman-basicfilesystems Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 564 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 48 Depends: e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14) Provides: partman-filesystem Description: Add to partman support for ext2, linux-swap, fat16 and fat32 Package: partman-basicmethods Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 132 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 31 Provides: partman-method Description: Basic partition usage methods for partman This package provides partman with two methods to use partitions. The first is to format the partition. The second is to keep and use the existing data in the partition as it is. Package: partman-crypto Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 796 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 15 Depends: partman-base (>= 87), libc6 (>= 2.3.6-6), cdebconf-udeb Description: Add to partman support for block device encryption Package: partman-efi Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 124 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 10 Depends: partman-base Description: Add to partman support for EFI boot partitions Package: partman-ext3 Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 224 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 42 Depends: cdebconf-udeb, e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14) Provides: partman-filesystem Description: Add to partman support for ext3 Package: partman-jfs Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 252 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 17 Depends: jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14) Provides: partman-filesystem Description: Add support for jfs to partman Package: partman-lvm Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 600 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 46 Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb Description: Adds support for LVM to partman Package: partman-md Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 152 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 29 Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87) Description: Add to partman support for MD Package: partman-partitioning Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 364 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 43 Depends: ntfsprogs-udeb, cdebconf-udeb Description: Partitioning operations for partman This udeb provides partman with editing operations for creation of new partitions, deletion of partitions and initialisation of the partition table. Package: partman-reiserfs Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 220 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 31 Depends: mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14) Provides: partman-filesystem Description: Add to partman support for reiserfs Package: partman-target Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 284 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 45 Depends: partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs Description: Provides partman with ability to prepare /target This udeb allows the user to choose how partitions should be used. Package: partman-xfs Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 216 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 29 Depends: xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14) Provides: partman-filesystem Description: Add to partman support for xfs Package: pcmcia-storage-modules-2.6.17-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 52 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di, ide-core-modules-2.6.17-2-486-di, cdrom-core-modules-2.6.17-2-486-di, pcmcia-modules-2.6.17-2-486-di Provides: pcmcia-storage-modules Description: PCMCIA storage drivers This package contains PCMCIA storage drivers for the Linux kernel. Package: pkgsel Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 28 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 0.09 Depends: apt-setup-udeb, di-utils (>= 1.20) Description: Select and install packages Installer-Menu-Item: 70 Package: reiserfs-modules-2.6.17-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 268 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di Provides: reiserfs-modules Description: Reiser filesystem support This package contains the Reiser filesystem module for the Linux kernel. Package: sata-modules-2.6.17-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 352 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di Provides: sata-modules Description: SATA drivers This package contains SATA drivers for the Linux kernel. Package: scsi-common-modules-2.6.17-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 704 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di, cdrom-core-modules-2.6.17-2-486-di Provides: scsi-common-modules Description: Very common SCSI drivers This package contains very common SCSI drivers for the Linux kernel. Package: scsi-extra-modules-2.6.17-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 1316 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: scsi-modules-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di Provides: scsi-extra-modules Description: Uncommon SCSI drivers This package contains uncommon SCSI drivers for the Linux kernel. This includes SCSI RAID drivers, and some of the less common SCSI controllers. Package: scsi-modules-2.6.17-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 1020 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di, parport-modules-2.6.17-2-486-di, cdrom-core-modules-2.6.17-2-486-di, firmware-modules-2.6.17-2-486-di Provides: scsi-modules Description: SCSI drivers This package contains SCSI drivers for the Linux kernel. Package: tzsetup-udeb Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 296 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1:0.11 Depends: localechooser Description: choose timezone Installer-Menu-Item: 62 Package: usb-storage-modules-2.6.17-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 132 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: ide-core-modules-2.6.17-2-486-di, scsi-core-modules-2.6.17-2-486-di, usb-modules-2.6.17-2-486-di Provides: usb-storage-modules Description: USB storage support This package contains the USB storage driver for the Linux kernel. Package: user-setup-udeb Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 320 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.6 Depends: cdebconf-udeb Description: Set up users and passwords Installer-Menu-Item: 63 Package: xfs-modules-2.6.17-2-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 568 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di Provides: xfs-modules Description: XFS filesystem support This package contains the XFS filesystem module for the Linux kernel. Package: xfsprogs-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 232 Maintainer: Nathan Scott <nathans@debian.org> Version: 2.8.11-1 Depends: libc6 (>= 2.3.6-6), libuuid1-udeb Description: A stripped-down version of xfsprogs, for debian-installer This package is an xfsprogs package built for reduced size, so that it can help to save space in debian-installer. . Don't attempt to install this package, it has no support for a couple of features you surely want. Anyway, it should fail to install. Package: ntfs-modules-2.6.17-2-486-di Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 248 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di Provides: ntfs-modules Description: NTFS filesystem support This package contains the NTFS file system module for the Linux kernel. Package: qnx4-modules-2.6.17-2-486-di Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 48 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.37 Depends: kernel-image-2.6.17-2-486-di Provides: qnx4-modules Description: QNX4 filesystem support This package contains the QNX4 filesystem module for the Linux kernel. -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.17-2-k7 Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) installation-report depends on no packages. Versions of packages installation-report recommends: ii pciutils 1:2.2.4~pre4-1 Linux PCI Utilities ii reportbug 3.30 reports bugs in the Debian distrib -- no debconf informationAttachment: pgpZ4_i09u6Tr.pgp
Description: PGP signature
--- End Message ---
--- Begin Message ---
- To: Patrick Häcker <pat_h@web.de>, 394743-done@bugs.debian.org
- Subject: Re: Bug#394743: Installation-report: Several minor problems during installation
- From: Geert Stappers <stappers@debian.org>
- Date: Sun, 22 Oct 2006 23:09:30 +0200
- Message-id: <20061022210930.GF1598@gpm.stappers.nl>
- In-reply-to: <[🔎] 200610222149.16531.pat_h@web.de>
- References: <[🔎] 200610222149.16531.pat_h@web.de>
Hello Patrick, Op 22-10-2006 om 21:49 schreef Patrick Häcker: > Package: installation-reports > Version: 2.20 > Severity: normal > <snip/> > > All the following observations propably don't affect D-I but I don't know > where to report it. So please forward it to > the correct package or point me to the desired place. Your request is seen. Honoring your request is another story. You provided feedback about a twenty issues. Assume that those twenty items have to be handled by twenty persons. Those persons have each there own speciality. It is a waste of their energy if they have to dig in a twenty topic bugreport with nineteen "off-topics" and only a single interresting item. Have a look a http://bugs.debian.org/394574 where is single item is discussed and open single item bugreport in the same way. See also http://www.nl.debian.org/Bugs/Reporting for more information about what is going on. Anyway: Have fun with you Debian GNU/Linux computer system. Geert Stappers (closing this install report)
--- End Message ---