Bug#394279: Package: installation-reports
Package: installation-reports
Boot method: netinst CD
Image version: cdimage/daily-builds downloaded 2006.10.19
http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/amd64/
Date: Fri Oct 20 09:22:46 EDT 2006
Machine: HP Pavillion D5130ca
Processor: AMD Turion64 2GHz
Memory: 1Gb
Partitions:
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/hda2 ext3 19228308 3656716 14594840 21% /
udev tmpfs 10240 64 10176 1% /dev
devshm tmpfs 513268 0 513268 0% /dev/shm
/dev/hda4 ext3 74999388 26307976 44881600 37% /a
/dev/hda1 ext3 19228276 5179504 13072024 29% /b
Output of lspci and lspci -n:
[~]$ lspci
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:05.0 PCI bridge: ATI Technologies Inc Unknown device 5a37
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host
Controller 00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB
Host Controller 00:13.2 USB Controller: ATI Technologies Inc IXP SB400
USB2 Host Controller 00:14.0 SMBus: ATI Technologies Inc IXP SB400
SMBus Controller (rev 11) 00:14.1 IDE interface: ATI Technologies Inc
Standard Dual Channel PCI IDE Controller ATI 00:14.3 ISA bridge: ATI
Technologies Inc IXP SB400 PCI-ISA Bridge 00:14.4 PCI bridge: ATI
Technologies Inc IXP SB400 PCI-PCI Bridge 00:14.5 Multimedia audio
controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev
02) 00:14.6 Modem: ATI Technologies Inc ATI SB400 - AC'97 Modem
Controller (rev 02) 00:18.0 Host bridge: Advanced Micro Devices [AMD]
K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1
Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address
Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro
Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 VGA
compatible controller: ATI Technologies Inc ATI Radeon XPRESS 200M 5955
(PCIE)06:02.0 Network controller: Broadcom Corporation BCM4318
[AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) 06:04.0
CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
06:04.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE
1394 Host Controller 06:04.3 Mass storage controller: Texas Instruments
PCIxx21 Integrated FlashMedia Controller 06:04.4 Generic system
peripheral [0805]: Texas Instruments PCI6411, PCI6421, PCI6611,
PCI6621, PCI7411, PCI7421, PCI7611, PCI7621 Secure Digital (SD)
Controller 06:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
[~]$ lspci -n
00:00.0 0600: 1002:5950 (rev 01)
00:01.0 0604: 1002:5a3f
00:05.0 0604: 1002:5a37
00:13.0 0c03: 1002:4374
00:13.1 0c03: 1002:4375
00:13.2 0c03: 1002:4373
00:14.0 0c05: 1002:4372 (rev 11)
00:14.1 0101: 1002:4376
00:14.3 0601: 1002:4377
00:14.4 0604: 1002:4371
00:14.5 0401: 1002:4370 (rev 02)
00:14.6 0703: 1002:4378 (rev 02)
00:18.0 0600: 1022:1100
00:18.1 0600: 1022:1101
00:18.2 0600: 1022:1102
00:18.3 0600: 1022:1103
01:05.0 0300: 1002:5955
06:02.0 0280: 14e4:4318 (rev 02)
06:04.0 0607: 104c:8031
06:04.2 0c00: 104c:8032
06:04.3 0180: 104c:8033
06:04.4 0805: 104c:8034
06:06.0 0200: 10ec:8139 (rev 10)
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
Trouble free install. Even got the correct 1280x800 widescreen
configuration of X automatically. Great work guys!
Probably would have had problems if I had tried to use the wireless
network because of:
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load
failed
Reply to: