Re: Debian Etch on IBM JS20 fails on hard drive
On Tue, Sep 26, 2006 at 02:51:42PM -0500, Mathew Binkley wrote:
> Hello. I attemped to install Debian Etch on a IBM JS20 using an iso
> from 09/22/2006. The install works correctly until it tries (and fails)
> to detect the PATA hard drive. None of the modules listed will work
> with it.
>
> When I install SuSE 9.1 on the same blade, it shows the hard drive in
> the logs as:
>
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> AMD8111: IDE controller at PCI slot 0000:00:04.1
> AMD8111: chipset revision 3
> AMD8111: 0000:00:04.1 (rev 03) UDMA133 controller
> AMD8111: 100% native mode on irq 32
> ide0: BM-DMA at 0x7c00-0x7c07, BIOS settings: hda:pio, hdb:pio
> ide1: BM-DMA at 0x7c08-0x7c0f, BIOS settings: hdc:pio, hdd:pio
> Probing IDE interface ide0...
> hda: FUJITSU MHT2040AS, ATA DISK drive
> Unhandled interrupt 20, disabled
> ide0 at 0x7400-0x7407,0x6c02 on irq 32
> Probing IDE interface ide1...
> Probing IDE interface ide1...
> hda: max request size: 128KiB
> hda: 78140160 sectors (40007 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(33)
> hda: cache flushes supported
> hda: hda1 hda2 hda3
>
> I'm presuming that the AMD8111 chipset is not currently supported under
> Debian Etch for PPC. Am I wrong, or is there another explanation? Thanks!
The amd74xx is the one in charge, can you go into a console, and then do an
lsmod to see if it is loaded ?
can you try modprobing it ? I can't really check it out myself, since my devel
box is currently down right now, and i have no checked out tree.
Mayube someone else within the d-i team can look at the powerpc kernel .udebs
to see where the amd74xx module is included and further help MAthew ?
(i will also mostly be offline until friday).
Friendly,
Sven Luther
Reply to: