Bug#389355: installation-report: Warning about boot partition on newworld powerpc.
Package: installation-reports
Version: 2.18
Severity: minor
After having partitioned my hard disk using the LVM guided partitioning mode and written it to disk, the installer complained
about not finding a NewWorld bootblock, whereas such a partition was on disk. I just ignored this warning after having looked
at the partition table and everything has gone without problem.
-- Package-specific info:
Boot method: CD
Image version:
http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/powerpc/iso-cd/debian-testing-powerpc-netinst.iso,
built on september the 24th.
Date: 24/09/2006
Machine: Apple Ibook G4 PowerBook6,3 MacRISC3 Power Macintosh revision 0.3 (pvr 8001 0303)
Partitions:
arthur@alpha:~$ sudo mac-fdisk -l /dev/hda
/dev/hda
# type name length base ( size ) system
/dev/hda1 Apple_partition_map Apple 63 @ 1 ( 31.5k) Partition map
/dev/hda2 Apple_Bootstrap untitled 1954 @ 64 (977.0k) NewWorld bootblock
/dev/hda3 Apple_UNIX_SVR2 untitled 500001 @ 2018 (244.1M) Linux native
/dev/hda4 Linux_LVM untitled 77638141 @ 502019 ( 37.0G) Unknown
Block size=512, Number of Blocks=78140160
DeviceType=0x0, DeviceId=0x0
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [0]
Configure network: [0]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [E]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
Apart from the warning during the partitioning phase, I was also surprised to see my FireWire interface proposed as a network card,
I just wonder if it's really necessary and I think it can be confusing for some users.
After having rebooted on my freshly installed machine, I saw that my wifi interface was named eth2_rename. The bug was in the way
/etc/udev/rules.d/z25_persistent-net.rules was generated. In fact the wifi interface and the FireWire one where both given the same
name as you can see below :
---8<----
# This file was automatically generated by the /lib/udev/write_net_rules
# program, probably run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single line.
# Firewire device 000d93fffe66b5d0 (ohci1394)
SUBSYSTEM=="net", DRIVERS=="?*", ATTRS{address}=="00:0d:93:ff:fe:66:b5:d0", NAME="eth0"
# PCI device 0x106b:0x0032 (gem)
SUBSYSTEM=="net", DRIVERS=="?*", ATTRS{address}=="00:0d:93:66:b5:d0", NAME="eth1"
# PCI device 0x14e4:0x4320 (bcm43xx)
SUBSYSTEM=="net", DRIVERS=="?*", ATTRS{address}=="00:11:24:21:a6:01", NAME="eth0"
---8<---
I have changed the name for the last one to give it a clean name.
Apart from these little annoyances, everything goes well, the installer
was clean, quick and easy to use, so thanks for all the work you made.
Arthur.
--
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="3.1 (installer build 20060923)"
X_INSTALLATION_MEDIUM=cdrom
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux alpha 2.6.17-2-powerpc #1 Wed Sep 13 16:30:39 CEST 2006 ppc unknown
lspci -v -t: -+-[0002:20]-+-0b.0 Apple Computer Inc. UniNorth 2 Internal PCI
lspci -v -t: | +-0d.0 Apple Computer Inc. UniNorth/Intrepid ATA/100
lspci -v -t: | +-0e.0 Apple Computer Inc. UniNorth 2 FireWire
lspci -v -t: | \-0f.0 Apple Computer Inc. UniNorth 2 GMAC (Sun GEM)
lspci -v -t: +-[0001:10]-+-0b.0 Apple Computer Inc. UniNorth 2 PCI
lspci -v -t: | +-12.0 Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller
lspci -v -t: | +-17.0 Apple Computer Inc. KeyLargo/Intrepid Mac I/O
lspci -v -t: | +-18.0 Apple Computer Inc. KeyLargo/Intrepid USB
lspci -v -t: | +-19.0 Apple Computer Inc. KeyLargo/Intrepid USB
lspci -v -t: | +-1a.0 Apple Computer Inc. KeyLargo/Intrepid USB
lspci -v -t: | +-1b.0 NEC Corporation USB
lspci -v -t: | +-1b.1 NEC Corporation USB
lspci -v -t: | \-1b.2 NEC Corporation USB 2.0
lspci -v -t: \-[0000:00]-+-0b.0 Apple Computer Inc. UniNorth 2 AGP
lspci -v -t: \-10.0 ATI Technologies Inc M9+ 5C63 [Radeon Mobility 9200 (AGP)]
lspci -n: 0000:00:0b.0 0600: 106b:0034
lspci -n: 0000:00:10.0 0300: 1002:5c63 (rev 01)
lspci -n: 0001:10:0b.0 0600: 106b:0035
lspci -n: 0001:10:12.0 0280: 14e4:4320 (rev 03)
lspci -n: 0001:10:17.0 ff00: 106b:003e
lspci -n: 0001:10:18.0 0c03: 106b:003f
lspci -n: 0001:10:19.0 0c03: 106b:003f
lspci -n: 0001:10:1a.0 0c03: 106b:003f
lspci -n: 0001:10:1b.0 0c03: 1033:0035 (rev 43)
lspci -n: 0001:10:1b.1 0c03: 1033:0035 (rev 43)
lspci -n: 0001:10:1b.2 0c03: 1033:00e0 (rev 04)
lspci -n: 0002:20:0b.0 0600: 106b:0036
lspci -n: 0002:20:0d.0 ff00: 106b:003b
lspci -n: 0002:20:0e.0 0c00: 106b:0031 (rev 81)
lspci -n: 0002:20:0f.0 0200: 106b:0032 (rev 80)
lspci -v: 0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 AGP
lspci -v: Flags: bus master, 66MHz, medium devsel, latency 16
lspci -v: Capabilities: [80] AGP version 1.0
lspci -v:
lspci -v: 0000:00:10.0 VGA compatible controller: ATI Technologies Inc M9+ 5C63 [Radeon Mobility 9200 (AGP)] (rev 01)
lspci -v: Subsystem: ATI Technologies Inc M9+ 5C63 [Radeon Mobility 9200 (AGP)]
lspci -v: Flags: bus master, 66MHz, medium devsel, latency 255, IRQ 48
lspci -v: Memory at 98000000 (32-bit, prefetchable) [size=128M]
lspci -v: I/O ports at f0000400 [size=256]
lspci -v: Memory at 90000000 (32-bit, non-prefetchable) [size=64K]
lspci -v: Expansion ROM at f1000000 [size=128K]
lspci -v: Capabilities: [58] AGP version 2.0
lspci -v: Capabilities: [50] Power Management version 2
lspci -v:
lspci -v: 0001:10:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 PCI
lspci -v: Flags: bus master, 66MHz, medium devsel, latency 16
lspci -v:
lspci -v: 0001:10:12.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
lspci -v: Subsystem: Apple Computer Inc. Unknown device 004e
lspci -v: Flags: bus master, fast devsel, latency 16, IRQ 52
lspci -v: Memory at 80084000 (32-bit, non-prefetchable) [disabled] [size=8K]
lspci -v: Capabilities: [40] Power Management version 2
lspci -v:
lspci -v: 0001:10:17.0 Class ff00: Apple Computer Inc. KeyLargo/Intrepid Mac I/O
lspci -v: Flags: bus master, medium devsel, latency 16
lspci -v: Memory at 80000000 (32-bit, non-prefetchable) [size=512K]
lspci -v:
lspci -v: 0001:10:18.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB (prog-if 10)
lspci -v: Flags: medium devsel
lspci -v:
lspci -v: 0001:10:19.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB (prog-if 10)
lspci -v: Flags: medium devsel
lspci -v:
lspci -v: 0001:10:1a.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB (prog-if 10)
lspci -v: Flags: bus master, medium devsel, latency 16, IRQ 29
lspci -v: Memory at 80083000 (32-bit, non-prefetchable) [size=4K]
lspci -v:
lspci -v: 0001:10:1b.0 USB Controller: NEC Corporation USB (rev 43) (prog-if 10)
lspci -v: Subsystem: NEC Corporation USB
lspci -v: Flags: bus master, medium devsel, latency 16, IRQ 63
lspci -v: Memory at 80082000 (32-bit, non-prefetchable) [size=4K]
lspci -v: Capabilities: [40] Power Management version 2
lspci -v:
lspci -v: 0001:10:1b.1 USB Controller: NEC Corporation USB (rev 43) (prog-if 10)
lspci -v: Subsystem: NEC Corporation USB
lspci -v: Flags: bus master, medium devsel, latency 16, IRQ 63
lspci -v: Memory at 80081000 (32-bit, non-prefetchable) [size=4K]
lspci -v: Capabilities: [40] Power Management version 2
lspci -v:
lspci -v: 0001:10:1b.2 USB Controller: NEC Corporation USB 2.0 (rev 04) (prog-if 20)
lspci -v: Subsystem: NEC Corporation USB 2.0
lspci -v: Flags: bus master, medium devsel, latency 16, IRQ 63
lspci -v: Memory at 80080000 (32-bit, non-prefetchable) [size=256]
lspci -v: Capabilities: [40] Power Management version 2
lspci -v:
lspci -v: 0002:20:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 Internal PCI
lspci -v: Flags: bus master, 66MHz, medium devsel, latency 16
lspci -v:
lspci -v: 0002:20:0d.0 Class ff00: Apple Computer Inc. UniNorth/Intrepid ATA/100
lspci -v: Flags: bus master, medium devsel, latency 32, IRQ 39
lspci -v: Memory at f5004000 (32-bit, non-prefetchable) [size=16K]
lspci -v:
lspci -v: 0002:20:0e.0 FireWire (IEEE 1394): Apple Computer Inc. UniNorth 2 FireWire (rev 81) (prog-if 10)
lspci -v: Subsystem: Apple Computer Inc. Unknown device 5811
lspci -v: Flags: bus master, medium devsel, latency 64, IRQ 40
lspci -v: Memory at f5000000 (32-bit, non-prefetchable) [size=4K]
lspci -v: Capabilities: [44] Power Management version 2
lspci -v:
lspci -v: 0002:20:0f.0 Ethernet controller: Apple Computer Inc. UniNorth 2 GMAC (Sun GEM) (rev 80)
lspci -v: Flags: bus master, 66MHz, slow devsel, latency 16, IRQ 41
lspci -v: Memory at f5200000 (32-bit, non-prefetchable) [size=2M]
lspci -v: Expansion ROM at f5100000 [disabled] [size=1M]
lspci -v:
lspci -x: 0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 AGP
lspci -x: 00: 6b 10 34 00 16 00 b0 22 00 00 00 06 08 10 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 0000:00:10.0 VGA compatible controller: ATI Technologies Inc M9+ 5C63 [Radeon Mobility 9200 (AGP)] (rev 01)
lspci -x: 00: 02 10 63 5c 07 00 b0 02 01 00 00 03 08 ff 00 00
lspci -x: 10: 08 00 00 98 01 04 00 00 00 00 00 90 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 63 5c
lspci -x: 30: 01 00 00 f1 58 00 00 00 00 00 00 00 30 01 08 00
lspci -x:
lspci -x: 0001:10:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 PCI
lspci -x: 00: 6b 10 35 00 16 00 a0 22 00 00 00 06 08 10 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 0001:10:12.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
lspci -x: 00: e4 14 20 43 04 00 10 00 03 00 80 02 00 10 00 00
lspci -x: 10: 00 40 08 80 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 6b 10 4e 00
lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 34 01 00 00
lspci -x:
lspci -x: 0001:10:17.0 Class ff00: Apple Computer Inc. KeyLargo/Intrepid Mac I/O
lspci -x: 00: 6b 10 3e 00 06 00 00 02 00 00 00 ff 08 10 00 00
lspci -x: 10: 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 0001:10:18.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB
lspci -x: 00: 6b 10 3f 00 00 00 00 02 00 10 03 0c 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 03 56
lspci -x:
lspci -x: 0001:10:19.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB
lspci -x: 00: 6b 10 3f 00 00 00 00 02 00 10 03 0c 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 03 56
lspci -x:
lspci -x: 0001:10:1a.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB
lspci -x: 00: 6b 10 3f 00 06 00 00 02 00 10 03 0c 08 10 00 00
lspci -x: 10: 00 30 08 80 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 1d 01 03 56
lspci -x:
lspci -x: 0001:10:1b.0 USB Controller: NEC Corporation USB (rev 43)
lspci -x: 00: 33 10 35 00 06 00 10 02 43 10 03 0c 08 10 80 00
lspci -x: 10: 00 20 08 80 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 33 10 35 00
lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 3f 01 01 2a
lspci -x:
lspci -x: 0001:10:1b.1 USB Controller: NEC Corporation USB (rev 43)
lspci -x: 00: 33 10 35 00 06 00 10 02 43 10 03 0c 08 10 00 00
lspci -x: 10: 00 10 08 80 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 33 10 35 00
lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 3f 02 01 2a
lspci -x:
lspci -x: 0001:10:1b.2 USB Controller: NEC Corporation USB 2.0 (rev 04)
lspci -x: 00: 33 10 e0 00 16 00 10 02 04 20 03 0c 08 10 00 00
lspci -x: 10: 00 00 08 80 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 33 10 e0 00
lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 3f 03 10 22
lspci -x:
lspci -x: 0002:20:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 Internal PCI
lspci -x: 00: 6b 10 36 00 16 00 a0 22 00 00 00 06 08 10 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 0002:20:0d.0 Class ff00: Apple Computer Inc. UniNorth/Intrepid ATA/100
lspci -x: 00: 6b 10 3b 00 06 00 00 82 00 00 00 ff 08 20 00 00
lspci -x: 10: 00 40 00 f5 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 0002:20:0e.0 FireWire (IEEE 1394): Apple Computer Inc. UniNorth 2 FireWire (rev 81)
lspci -x: 00: 6b 10 31 00 06 00 90 02 81 10 00 0c 08 40 00 00
lspci -x: 10: 00 00 00 f5 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 6b 10 11 58
lspci -x: 30: 00 00 00 00 44 00 00 00 00 00 00 00 28 01 0c 18
lspci -x:
lspci -x: 0002:20:0f.0 Ethernet controller: Apple Computer Inc. UniNorth 2 GMAC (Sun GEM) (rev 80)
lspci -x: 00: 6b 10 32 00 16 00 a0 84 80 00 00 02 08 10 00 00
lspci -x: 10: 00 00 20 f5 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 10 f5 00 00 00 00 00 00 00 00 29 01 40 40
lspci -x:
lsmod: Module Size Used by
lsmod: nls_utf8 2240 0
lsmod: hfsplus 88036 0
lsmod: dm_mod 65168 7
lsmod: xfs 532916 0
lsmod: reiserfs 318008 0
lsmod: jfs 196332 0
lsmod: hfs 56900 0
lsmod: ext3 154344 3
lsmod: jbd 67764 1 ext3
lsmod: vfat 14112 0
lsmod: fat 60092 1 vfat
lsmod: ext2 77928 0
lsmod: mbcache 9636 2 ext3,ext2
lsmod: eth1394 21508 0
lsmod: sungem 34468 0
lsmod: sungem_phy 10496 1 sungem
lsmod: sbp2 24680 0
lsmod: isofs 39512 0
lsmod: aec62xx 8224 0 [permanent]
lsmod: cmd64x 12476 0 [permanent]
lsmod: generic 4772 0 [permanent]
lsmod: hpt34x 5536 0 [permanent]
lsmod: ns87415 4708 0 [permanent]
lsmod: pdc202xx_new 11008 0 [permanent]
lsmod: pdc202xx_old 11648 0 [permanent]
lsmod: sc1200 9280 0 [permanent]
lsmod: siimage 13632 0 [permanent]
lsmod: sl82c105 7520 0 [permanent]
lsmod: trm290 4898 0 [permanent]
lsmod: via82cxxx 10436 0 [permanent]
lsmod: usb_storage 86956 0
lsmod: scsi_mod 167824 2 sbp2,usb_storage
lsmod: usbserial 35536 0
lsmod: usbhid 57924 0
lsmod: ohci1394 39824 0
lsmod: ohci_hcd 23012 0
lsmod: ehci_hcd 35144 0
lsmod: usbcore 146204 6 usb_storage,usbserial,usbhid,ohci_hcd,ehci_hcd
lsmod: ieee1394 426544 3 eth1394,sbp2,ohci1394
lsmod: ide_disk 18944 3
lsmod: ide_cd 46788 0
lsmod: cdrom 43484 1 ide_cd
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 322100 420 321680 0% /dev
df: tmpfs 322100 420 321680 0% /dev
df: tmpfs 322100 420 321680 0% /.dev
df: /dev/mapper/Debian-root 6890048 2314564 4225484 35% /target
df: /dev/ide/host0/bus0/target0/lun0/part3 234297 14545 207252 7% /target/boot
df: /dev/mapper/Debian-home 29991896 131276 28337116 0% /target/home
free: total used free shared buffers
free: Mem: 644200 585264 58936 0 3196
free: Swap: 1347576 416 1347160
free: Total: 1991776 585680 1406096
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 34: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 35: cardctl: not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: cpu : 7455, altivec supported
/proc/cpuinfo: clock : 798.720000MHz
/proc/cpuinfo: revision : 0.3 (pvr 8001 0303)
/proc/cpuinfo: bogomips : 48.41
/proc/cpuinfo: timebase : 18432000
/proc/cpuinfo: platform : PowerMac
/proc/cpuinfo: machine : PowerBook6,3
/proc/cpuinfo: motherboard : PowerBook6,3 MacRISC3 Power Macintosh
/proc/cpuinfo: detected as : 287 (iBook G4)
/proc/cpuinfo: pmac flags : 0000001b
/proc/cpuinfo: L2 cache : 256K unified
/proc/cpuinfo: pmac-generation : NewWorld
/proc/ioports: 00000000-007fffff : /pci@f2000000
/proc/ioports: 00802000-01001fff : /pci@f0000000
/proc/ioports: 00802400-008024ff : 0000:00:10.0
/proc/ioports: ff7fe000-ffffdfff : /pci@f4000000
/proc/iomem: 80000000-8fffffff : /pci@f2000000
/proc/iomem: 80000000-8007ffff : 0001:10:17.0
/proc/iomem: 80000000-8007ffff : 0.80000000:mac-io
/proc/iomem: 80000050-8000007f : 0.00000050:gpio
/proc/iomem: 80008000-800080ff : 0.00010000:i2s
/proc/iomem: 80008100-800081ff : 0.00010000:i2s
/proc/iomem: 80008200-800082ff : 0.00010000:i2s
/proc/iomem: 80008300-800083ff : 0.00010000:i2s
/proc/iomem: 80008800-800088ff : 0.00020000:ata-3
/proc/iomem: 80008800-800088ff : ide-pmac (dma)
/proc/iomem: 80010000-80010fff : 0.00010000:i2s
/proc/iomem: 80013000-80013000 : 0.00013000:ch-b
/proc/iomem: 80013010-80013010 : 0.00013000:ch-b
/proc/iomem: 80013020-80013020 : 0.00013020:ch-a
/proc/iomem: 80013030-80013030 : 0.00013020:ch-a
/proc/iomem: 80013040-80013040 : 0.00013000:ch-b
/proc/iomem: 80013050-80013050 : 0.00013020:ch-a
/proc/iomem: 80015000-80015fff : 0.00015000:timer
/proc/iomem: 80016000-80017fff : 0.00016000:via-pmu
/proc/iomem: 80018000-80018fff : 0.00018000:i2c
/proc/iomem: 80020000-80020fff : 0.00020000:ata-3
/proc/iomem: 80020000-80020fff : ide-pmac (ports)
/proc/iomem: 80040000-8007ffff : 0.00040000:interrup
/proc/iomem: 80080000-800800ff : 0001:10:1b.2
/proc/iomem: 80080000-800800ff : ehci_hcd
/proc/iomem: 80081000-80081fff : 0001:10:1b.1
/proc/iomem: 80081000-80081fff : ohci_hcd
/proc/iomem: 80082000-80082fff : 0001:10:1b.0
/proc/iomem: 80082000-80082fff : ohci_hcd
/proc/iomem: 80083000-80083fff : 0001:10:1a.0
/proc/iomem: 80083000-80083fff : ohci_hcd
/proc/iomem: 80084000-80085fff : 0001:10:12.0
/proc/iomem: 90000000-9fffffff : /pci@f0000000
/proc/iomem: 90000000-9000ffff : 0000:00:10.0
/proc/iomem: 90000000-9000ffff : radeonfb mmio
/proc/iomem: 98000000-9fffffff : 0000:00:10.0
/proc/iomem: 98000000-9fffffff : radeonfb framebuffer
/proc/iomem: f1000000-f1ffffff : /pci@f0000000
/proc/iomem: f1000000-f101ffff : 0000:00:10.0
/proc/iomem: f3000000-f3ffffff : /pci@f2000000
/proc/iomem: f5000000-f5ffffff : /pci@f4000000
/proc/iomem: f5000000-f5000fff : 0002:20:0e.0
/proc/iomem: f5000000-f50007ff : ohci1394
/proc/iomem: f5004000-f5007fff : 0002:20:0d.0
/proc/iomem: f5004000-f5007fff : Kauai ATA
/proc/iomem: f5200000-f53fffff : 0002:20:0f.0
/proc/iomem: f5200000-f53fffff : sungem
/proc/interrupts: CPU0
/proc/interrupts: 24: 1700 MPIC 1 Level ide1
/proc/interrupts: 25: 113832 MPIC 1 Level VIA-PMU
/proc/interrupts: 26: 0 MPIC 1 Level keywest i2c
/proc/interrupts: 29: 0 MPIC 1 Level ohci_hcd:usb2
/proc/interrupts: 39: 7912625 MPIC 1 Level ide0
/proc/interrupts: 40: 2 MPIC 1 Level ohci1394
/proc/interrupts: 41: 473534 MPIC 1 Level eth1
/proc/interrupts: 42: 22 MPIC 1 Level keywest i2c
/proc/interrupts: 47: 6251 MPIC 1 Level GPIO1 ADB
/proc/interrupts: 63: 0 MPIC 1 Level ehci_hcd:usb1, ohci_hcd:usb3, ohci_hcd:usb4
/proc/interrupts: BAD: 0
/proc/meminfo: MemTotal: 644200 kB
/proc/meminfo: MemFree: 58920 kB
/proc/meminfo: Buffers: 3196 kB
/proc/meminfo: Cached: 517280 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 212640 kB
/proc/meminfo: Inactive: 324680 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 644200 kB
/proc/meminfo: LowFree: 58920 kB
/proc/meminfo: SwapTotal: 1347576 kB
/proc/meminfo: SwapFree: 1347160 kB
/proc/meminfo: Dirty: 2876 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: Mapped: 19008 kB
/proc/meminfo: Slab: 38388 kB
/proc/meminfo: CommitLimit: 1669676 kB
/proc/meminfo: Committed_AS: 20704 kB
/proc/meminfo: PageTables: 340 kB
/proc/meminfo: VmallocTotal: 317860 kB
/proc/meminfo: VmallocUsed: 26804 kB
/proc/meminfo: VmallocChunk: 289664 kB
/proc/bus/input/devices: I: Bus=0017 Vendor=0001 Product=0001 Version=0100
/proc/bus/input/devices: N: Name="Macintosh mouse button emulation"
/proc/bus/input/devices: P: Phys=
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=mouse0
/proc/bus/input/devices: B: EV=7
/proc/bus/input/devices: B: KEY=70000 0 0 0 0 0 0 0 0
/proc/bus/input/devices: B: REL=3
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0017 Vendor=0001 Product=22c4 Version=0200
/proc/bus/input/devices: N: Name="ADB keyboard"
/proc/bus/input/devices: P: Phys=adb2:2.c4/input
/proc/bus/input/devices: S: Sysfs=/class/input/input1
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=120003
/proc/bus/input/devices: B: KEY=feb0ffdf 3cfffff ffffffff fffffffe
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0017 Vendor=0001 Product=771f Version=0100
/proc/bus/input/devices: N: Name="ADB Powerbook buttons"
/proc/bus/input/devices: P: Phys=adb7:7.1f/input
/proc/bus/input/devices: S: Sysfs=/class/input/input2
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=100003
/proc/bus/input/devices: B: KEY=7b 0 2 0 e0000 0 0 0
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0017 Vendor=0001 Product=3301 Version=0100
/proc/bus/input/devices: N: Name="ADB mouse"
/proc/bus/input/devices: P: Phys=adb3:3.01/input
/proc/bus/input/devices: S: Sysfs=/class/input/input3
/proc/bus/input/devices: H: Handlers=mouse1
/proc/bus/input/devices: B: EV=7
/proc/bus/input/devices: B: KEY=70000 0 0 0 0 0 0 0 0
/proc/bus/input/devices: B: REL=3
/proc/bus/input/devices:
dmidecode: /usr/bin/report-hw: /usr/bin/report-hw: 43: dmidecode: not found
==============================================
Installer status:
==============================================
Package: preseed-common
Status: install ok unpacked
Version: 1.17
Depends: di-utils (>= 1.14)
Description: common files for preseeding
Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone
Package: localechooser
Status: install ok installed
Version: 1.25
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6.ds1-4
Description: GNU C Library: NSS helper for DNS - udeb
Package: cdrom-checker
Status: install ok unpacked
Version: 1.08
Depends: cdrom-detect, cdebconf-udeb (>= 0.31)
Description: Verify the cd contents
Installer-Menu-Item: 940
Package: lowmemcheck
Status: install ok unpacked
Version: 1.21
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode
Package: console-keymaps-usb
Status: install ok installed
Version: 2:1.0-3
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for USB keyboards
Package: cdrom-retriever
Status: install ok installed
Version: 1.11
Provides: retriever
Depends: cdrom-detect
Description: Fetch modules from a CDROM
Package: main-menu
Status: install ok unpacked
Version: 1.13
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.42), cdebconf-udeb
Description: Debian installer main menu
Package: di-utils-shell
Status: install ok unpacked
Version: 1.35
Depends: cdebconf-udeb (>= 0.73), di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950
Package: di-utils
Status: install ok installed
Version: 1.35
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.43), cdebconf-udeb (>= 0.97)
Description: Miscellaneous utilities for the debian installer
Package: kernel-image-2.6.17-2-powerpc-di
Status: install ok unpacked
Version: 1.21
Provides: kernel-image
Description: Linux kernel binary image for the Debian installer
Package: firmware-modules-2.6.17-2-powerpc-di
Status: install ok unpacked
Version: 1.21
Provides: firmware-modules
Depends: kernel-image-2.6.17-2-powerpc-di
Description: Firmware request modules
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.105
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.5-1), libnewt0.52
Description: Newt frontend for Debian Configuration Management System
Package: serial-modules-2.6.17-2-powerpc-di
Status: install ok unpacked
Version: 1.21
Provides: serial-modules
Depends: kernel-image-2.6.17-2-powerpc-di, pcmcia-modules-2.6.17-2-powerpc-di
Description: Serial drivers
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.2.2-3
Depends: libc6 (>= 2.3.5-1)
Description: tools for managing Linux kernel modules
Package: rootskel
Status: install ok installed
Version: 1.37
Depends: di-utils (>= 1.24), cdebconf-udeb
Description: Skeleton root filesystem used by debian-installer
Package: pcmcia-modules-2.6.17-2-powerpc-di
Status: install ok unpacked
Version: 1.21
Provides: pcmcia-modules
Depends: firmware-modules-2.6.17-2-powerpc-di
Description: Common PCMCIA drivers
Package: input-modules-2.6.17-2-powerpc-di
Status: install ok unpacked
Version: 1.21
Provides: input-modules
Depends: kernel-image-2.6.17-2-powerpc-di, usb-modules-2.6.17-2-powerpc-di
Description: Input devices support
Package: firewire-core-modules-2.6.17-2-powerpc-di
Status: install ok unpacked
Version: 1.21
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.17-2-powerpc-di, kernel-image-2.6.17-2-powerpc-di
Description: Core FireWire drivers
Package: udev-udeb
Status: install ok unpacked
Version: 0.100-1
Depends: libc6 (>= 2.3.5-1)
Description: /dev/ and hotplug management daemon
Package: usb-serial-modules-2.6.17-2-powerpc-di
Status: install ok unpacked
Version: 1.21
Provides: usb-serial-modules
Depends: kernel-image-2.6.17-2-powerpc-di, usb-modules-2.6.17-2-powerpc-di
Description: USB serial drivers
Package: brltty-udeb
Status: install ok unpacked
Version: 3.7.2-3.1
Depends: libc6 (>= 2.3.5-1)
Description: Access software for a blind person using a soft braille terminal
Package: fs-common-modules-2.6.17-2-powerpc-di
Status: install ok unpacked
Version: 1.21
Provides: fs-common-modules
Depends: kernel-image-2.6.17-2-powerpc-di
Description: Common filesystem support
Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-4
Depends: libc6 (>= 2.3.5-1)
Description: Free Implementation of the Unicode BiDi algorithm
Package: usb-storage-modules-2.6.17-2-powerpc-di
Status: install ok unpacked
Version: 1.21
Provides: usb-storage-modules
Depends: scsi-core-modules-2.6.17-2-powerpc-di, usb-modules-2.6.17-2-powerpc-di
Description: USB storage support
Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.5-1)
Description: text-wrapping library with i18n - runtime udeb
Package: usb-discover
Status: install ok unpacked
Version: 1.05
Description: Discover USB and load kernel modules
Package: rescue-check
Status: install ok unpacked
Version: 1.6
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested
Package: nano-udeb
Status: install ok unpacked
Version: 1.9.99pre1-1
Provides: editor
Depends: libc6 (>= 2.3.5-1), libslang2-udeb (>= 2.0.6-3)
Description: free Pico clone with some new features - tiny build
Package: ide-modules-2.6.17-2-powerpc-di
Status: install ok unpacked
Version: 1.21
Provides: ide-modules
Depends: kernel-image-2.6.17-2-powerpc-di, fs-common-modules-2.6.17-2-powerpc-di
Description: IDE drivers
Package: pcmcia-storage-modules-2.6.17-2-powerpc-di
Status: install ok unpacked
Version: 1.21
Provides: pcmcia-storage-modules
Depends: kernel-image-2.6.17-2-powerpc-di, cdrom-core-modules-2.6.17-2-powerpc-di, pcmcia-modules-2.6.17-2-powerpc-di
Description: PCMCIA storage drivers
Package: cdebconf-udeb
Status: install ok installed
Version: 0.105
Provides: debconf-2.0
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.43), libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)
Package: scsi-modules-2.6.17-2-powerpc-di
Status: install ok unpacked
Version: 1.21
Provides: scsi-modules
Depends: kernel-image-2.6.17-2-powerpc-di, scsi-core-modules-2.6.17-2-powerpc-di, cdrom-core-modules-2.6.17-2-powerpc-di, firmware-modules-2.6.17-2-powerpc-di
Description: SCSI drivers
Package: scsi-core-modules-2.6.17-2-powerpc-di
Status: install ok unpacked
Version: 1.21
Provides: scsi-core-modules
Depends: kernel-image-2.6.17-2-powerpc-di
Description: Core SCSI subsystem
Package: load-cdrom
Status: install ok installed
Version: 1.11
Depends: cdrom-retriever, anna (>= 1.07)
Description: Load installer components from CD
Installer-Menu-Item: 16
Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.105
Depends: cdebconf-udeb, libc6 (>= 2.3.5-1)
Description: Plain text frontend for Debian Configuration Management System
Package: scsi-common-modules-2.6.17-2-powerpc-di
Status: install ok unpacked
Version: 1.21
Provides: scsi-common-modules
Depends: kernel-image-2.6.17-2-powerpc-di, scsi-core-modules-2.6.17-2-powerpc-di, cdrom-core-modules-2.6.17-2-powerpc-di
Description: Very common SCSI drivers
Package: iso-3166-udeb
Status: install ok installed
Version: 0.53-1
Description: provides iso_3166.tab file
Package: floppy-retriever
Status: install ok unpacked
Version: 1.09
Provides: retriever
Depends: mountfloppy
Description: Fetches modules from a floppy
Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-3
Depends: libc6 (>= 2.3.5-1)
Description: Tiny utilities for the debian-installer
Package: initrd-preseed
Status: install ok unpacked
Version: 1.17
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd
Package: cdrom-core-modules-2.6.17-2-powerpc-di
Status: install ok unpacked
Version: 1.21
Provides: cdrom-core-modules
Depends: kernel-image-2.6.17-2-powerpc-di, scsi-core-modules-2.6.17-2-powerpc-di, ide-modules-2.6.17-2-powerpc-di
Description: CDROM support
Package: floppy-modules-2.6.17-2-powerpc-di
Status: install ok unpacked
Version: 1.21
Provides: floppy-modules
Depends: kernel-image-2.6.17-2-powerpc-di
Description: Floppy driver
Package: archdetect
Status: install ok installed
Version: 1.42
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.44)
Description: Hardware architecture detector
Package: save-logs
Status: install ok unpacked
Version: 2.18
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.35
Description: Reboot
Installer-Menu-Item: 995
Package: anna
Status: install ok installed
Version: 1.24
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: libsysfs2-udeb
Status: install ok unpacked
Version: 2.0.0-7
Provides: libsysfs2
Depends: libc6 (>= 2.3.5-1)
Description: interface library to sysfs
Package: pcmciautils-udeb
Status: install ok unpacked
Version: 014-2
Depends: udev-udeb, libc6 (>= 2.3.5-1), libsysfs2-udeb
Description: PCMCIA utilities for Linux 2.6
Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.4~pre4-1
Depends: libc6 (>= 2.3.5-1)
Description: Linux PCI Utilities (udeb)
Package: console-keymaps-at
Status: install ok installed
Version: 2:1.0-3
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.35
Description: Terminfo entries needed by newt/slang in debian installer
Package: hw-detect
Status: install ok installed
Version: 1.42
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it
Package: kbd-chooser
Status: install ok installed
Version: 1.30
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.44), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.44
Depends: libc6 (>= 2.3.5-1)
Description: Library of common debian-installer functions
Package: eject-udeb
Status: install ok unpacked
Version: 2.1.4-2.1
Depends: libc6 (>= 2.3.5-1), cdebconf-udeb
Description: ejects CDs from d-i menu
Installer-Menu-Item: 960
Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale
Package: env-preseed
Status: install ok unpacked
Version: 1.17
Description: debconf preseeding via environment variables
Package: mountfloppy
Status: install ok unpacked
Version: 0.7
Depends: di-utils (>= 1.15)
Description: Mounts a floppy
Package: cdebconf-priority
Status: install ok unpacked
Version: 0.105
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930
Package: file-preseed
Status: install ok unpacked
Version: 1.17
Depends: di-utils, preseed-common
Description: load debconf preseed file
Installer-Menu-Item: 14
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.105
Depends: libc6 (>= 2.3.5-1), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.4
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: cdrom-detect
Status: install ok installed
Version: 1.17
Depends: hw-detect, di-utils (>= 1.33)
Description: Detect CDROM devices and mount the CD
Installer-Menu-Item: 13
Package: usb-modules-2.6.17-2-powerpc-di
Status: install ok unpacked
Version: 1.21
Provides: usb-modules
Depends: kernel-image-2.6.17-2-powerpc-di
Description: USB support
Package: debian-installer
Status: install ok installed
Version: powerpc-cdrom-20060923
Description: debian installation image
Package: apt-cdrom-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.15
Depends: cdrom-detect, cdebconf-udeb
Provides: apt-mirror-setup
Description: set up a CD in sources.list
Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.15
Depends: choose-mirror-bin, cdebconf-udeb
Description: set up a mirror in sources.list
Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 96
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.15
Depends: apt-mirror-setup, base-installer (>= 1.49), cdebconf-udeb
Description: Configure apt
Installer-Menu-Item: 70
Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 584
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.67
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.44), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19)
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65
Package: cdebconf-newt-entropy
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 44
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.4
Depends: cdebconf-newt-udeb, libc6 (>= 2.3.5-1), libnewt0.52
Description: cdebconf newt plugin for reading from /dev/random
cdebconf plugin to facilitate reading random data from /dev/random.
Asks the user to enter random characters on the keyboard and shows a
progressbar with percent-of-data read.
Package: choose-mirror-bin
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 292
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.05
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.44), cdebconf-udeb
Description: Choose mirror to install from (program)
Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 72
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.11
Depends: cdebconf-udeb, os-prober, tzsetup-udeb
Description: set up clock
Installer-Menu-Item: 62
Package: crypto-modules-2.6.17-2-powerpc-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 148
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.17-2-powerpc-di
Provides: crypto-modules
Description: crypto modules
This package contains crypto modules.
Package: cryptsetup-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 448
Maintainer: Debian Cryptsetup Team <pkg-cryptsetup-devel@lists.alioth.debian.org>
Version: 2:1.0.4~rc2-1
Depends: libc6 (>= 2.3.5-1), libdevmapper1.02-udeb (>= 2:1.02.02-2), libpopt0-udeb (>= 1.10), libuuid1-udeb, dmsetup-udeb
Description: configures encrypted block devices
Since kernel 2.6.4, encrypted filesystem support is provided by the device
mapper target dm-crypt. This utility provides a command-line interface for
configuring this facility. It has integrated support for LUKS.
.
cryptsetup is backwards compatible with the on-disk format of cryptoloop,
but also supports more secure formats. This package also includes support
for automatically configuring encrypted devices at boot time via the config
file /etc/crypttab. When combined with newer versions of the debian
initrd-tools and standard debian kernels, cryptoroot is also supported.
Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 160
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3
Depends: libc6 (>= 2.3.5-1), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: dhcp-client-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 164
Maintainer: Eloy A. Paris <peloy@debian.org>
Version: 2.0pl5-19.4
Depends: libc6 (>= 2.3.5-1)
Description: DHCP Client for debian-installer
dhcp-client-udeb is a minimal dhcp package used by the debian-installer.
Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.35
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.43)
Description: mapdevfs utility for the debian installer
Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.42
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35
Package: dmsetup-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 36
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.08-1
Depends: libc6 (>= 2.3.5-1), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Kernel Device Mapper userspace library
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
.
This package contains a utility for modifying device mappings.
Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 436
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39-1
Depends: libblkid1-udeb, libc6 (>= 2.3.5-1)
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: ethdetect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.42
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: ethernet-card-detection
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 18
Package: ext2-modules-2.6.17-2-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 124
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.17-2-powerpc-di, fs-common-modules-2.6.17-2-powerpc-di
Provides: ext2-modules
Description: EXT2 filesystem support
This package contains the EXT2 filesystem module for the Linux kernel.
Package: ext3-modules-2.6.17-2-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 312
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.17-2-powerpc-di, fs-common-modules-2.6.17-2-powerpc-di
Provides: ext3-modules
Description: EXT3 filesystem support
This package contains the EXT3 filesystem module for the Linux kernel.
Package: fat-modules-2.6.17-2-powerpc-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 144
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.17-2-powerpc-di, fs-common-modules-2.6.17-2-powerpc-di
Provides: fat-modules
Description: FAT filesystem support
This package contains the FAT and VFAT filesystem modules for the Linux kernel.
Package: finish-install
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 104
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.4
Depends: archdetect, base-installer, created-fstab, bootable-system
Provides: prebaseconfig
Description: Finish the installation and reboot
Installer-Menu-Item: 78
Package: gnupg-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 792
Maintainer: James Troup <james@nocrew.org>
Version: 1.4.5-1
Depends: libc6 (>= 2.3.5-1), libusb-0.1-udeb (>= 2:0.1.12), zlib1g-udeb (>= 1:1.2.1)
Description: GNU privacy guard - a free PGP replacement
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC2440.
.
This is GnuPG packaged in minimal form for use in debian-installer.
Package: hfs-modules-2.6.17-2-powerpc-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 212
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.17-2-powerpc-di, fs-common-modules-2.6.17-2-powerpc-di
Provides: hfs-modules
Description: HFS filesystem support
This package contains the HFS and HFS+ filesystem modules for the Linux kernel.
Package: jfs-modules-2.6.17-2-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 260
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.17-2-powerpc-di, fs-common-modules-2.6.17-2-powerpc-di
Provides: jfs-modules
Description: JFS filesystem support
This package contains the JFS filesystem module for the Linux kernel.
Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 1176
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.11-1
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Description: A stripped-down version of jfsutils, for debian-installer
This package is a jfsutils package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 44
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39-1
Depends: libc6 (>= 2.3.5-1)
Provides: libblkid1
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 2076
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6.ds1-4
Provides: libc6, libc-udeb, glibc-2.3.6.ds1-1, glibc-2.3.6-2
Description: GNU C Library: Shared libraries - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains a minimal set of libraries needed for the Debian
installer. Do not install it on a normal system.
Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 80
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.08-1
Depends: libc6 (>= 2.3.5-1)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
This is a udeb, or a microdeb, for the debian-installer.
.
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
Package: libiw28-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 44
Maintainer: Guus Sliepen <guus@debian.org>
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 380
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-2.1
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: libpopt0-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 44
Maintainer: Paul Martin <pm@debian.org>
Version: 1.10-3
Depends: libc6 (>= 2.3.5-1)
Description: lib for parsing cmdline parameters
Popt was heavily influenced by the getopt() and getopt_long() functions,
but it allows more powerful argument expansion. It can parse arbitrary
argv[] style arrays and automatically set variables based on command
line arguments. It also allows command line arguments to be aliased via
configuration files and includes utility functions for parsing arbitrary
strings into argv[] arrays using shell-like rules.
.
This package contains the runtime library and locale data.
.
This is a minimal package for use in debian-installer.
Package: libusb-0.1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 44
Maintainer: Aurelien Jarno <aurel32@debian.org>
Version: 2:0.1.12-2
Depends: libc6 (>= 2.3.5-1)
Provides: libusb-0.1-4
Description: userspace USB programming library
Library for programming USB applications without the knowledge
of Linux kernel internals.
.
More information can be found at the Linux USB web site
http://www.linux-usb.org/ .
.
This is a minimal package for use in debian-installer.
Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 28
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39-1
Depends: libc6 (>= 2.3.5-1)
Provides: libuuid1
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's),
using a standard which is blessed by both Microsoft and DCE, and is
being proposed as an internet standard. See the internet-draft:
.
draft-leach-uuids-guids-01.txt
.
for more information.
.
This is a minimal package for debian-installer.
Package: loop-aes-2.6.17-2-powerpc-di
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 152
Maintainer: Max Vozeler <xam@debian.org>
Version: 3.1d+3+5
Depends: kernel-image-2.6.17-2-powerpc-di, mount-aes-udeb (>= 2.12p-1)
Provides: loop-aes-modules
Description: loop-AES encryption modules for kernel 2.6.17-2-powerpc-di
This package contains the loop-AES loadable Linux kernel modules
compiled for kernel 2.6.17-2-powerpc-di
.
loop-AES can be used to encrypt disk partitions, removable media,
swap space and other devices. It provides measures to strengthen
the encryption: Passphrase seeds, multiple hash iterations, MD5 IV
and use of alternating encryption keys.
.
Encryption keys can be stored in a GnuPG-encrypted keyfile, which
allows the passphrase to be changed without re-encryption. Keyfiles
can also be encrypted asymmetrically for multi-user access.
.
This package includes the cipher modules blowfish, twofish and
serpent in addition to the default cipher (AES).
.
If you compiled a custom kernel, you will most likely need to
compile a custom version of these modules as well. The package
loop-aes-source has been provided for this purpose.
Package: loop-modules-2.6.17-2-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 60
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.17-2-powerpc-di
Provides: loop-modules
Description: Loopback filesystem support
This package contains loopback filesystem support for the Linux kernel.
Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 488
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.06-2
Depends: libc6 (>= 2.3.5-1), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
This is a udeb, or a microdeb, for the debian-installer.
.
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Package: mac-fdisk-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 40
Maintainer: Michael Schmitz <schmitz@biophys.uni-duesseldorf.de>
Version: 0.1-13
Depends: libc6 (>= 2.3.5-1)
Description: Apple disk partition manipulation tool
The fdisk utilities from the MkLinux project, adopted for Linux/m68k.
Mac-fdisk allows you to create and edit the partition table of a disk.
It supports only the Apple partition format used on Macintosh and PowerMac,
use pmac-fdisk for PC partition format disks as used on PowerPC machines.
Mac-fdisk is an interactive tool with a menu similar to PC fdisk, supported
options are somewhat different from PC fdisk due to the differences in
partition format.
.
This is a minimal mac-fdisk package used by the debian-installer.
Package: md-modules-2.6.17-2-powerpc-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 424
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.17-2-powerpc-di
Provides: md-modules
Description: RAID and LVM support
This package contains RAID and LVM modules for the Linux kernel.
Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 200
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 2.5.3.git200608202239-6
Depends: libc6 (>= 2.3.5-1)
Description: tool to administer Linux MD arrays (software RAID)
mdadm is a program that can be used to create, manage, and monitor MD
arrays (e.g. software RAID, multipath devices).
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 356
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb (>= 2.5.2), partconf-find-partitions
Description: Configure MD devices
Use this module to configure the MD devices.
Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 192
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-3
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Description: User-level tools for ReiserFS filesystems
This installer module contains the utility to create ReiserFS filesystems.
.
Homepage: http://www.namesys.com/
Package: mount-aes-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 260
Maintainer: Max Vozeler <xam@debian.org>
Version: 2.12r-13
Depends: libblkid1-udeb (>= 1.37-1), libc6 (>= 2.3.5-1), libuuid1-udeb
Description: Mount utils for loop-AES
loop-AES patched mount, losetup and swapon
Package: netcfg
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 796
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.29
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.43), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Provides: configured-network
Description: Configure the network
To install additional installer components or the Debian Base System over
the network, you need to configure the network in the installer. This
component will first try to configure your network with DHCP and ask
you for static network configuration if this fails. The configured
network settings will be copied to your newly installed system.
Installer-Menu-Item: 18
Package: network-preseed
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 20
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21
Package: nic-extra-modules-2.6.17-2-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1156
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.17-2-powerpc-di, nic-shared-modules-2.6.17-2-powerpc-di, firmware-modules-2.6.17-2-powerpc-di
Provides: nic-extra-modules
Description: Rare NIC drivers
This package contains rare NIC drivers for the Linux kernel.
Package: nic-modules-2.6.17-2-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1304
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.17-2-powerpc-di, nic-shared-modules-2.6.17-2-powerpc-di, firmware-modules-2.6.17-2-powerpc-di, firewire-core-modules-2.6.17-2-powerpc-di
Provides: nic-modules
Description: Common NIC drivers
This package contains common NIC drivers for the Linux kernel.
Package: nic-pcmcia-modules-2.6.17-2-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 800
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.17-2-powerpc-di, nic-shared-modules-2.6.17-2-powerpc-di, nic-extra-modules-2.6.17-2-powerpc-di, pcmcia-modules-2.6.17-2-powerpc-di
Provides: nic-pcmcia-modules
Description: Common PCMCIA NIC drivers
This package contains common PCMCIA NIC drivers for the Linux kernel.
Package: nic-shared-modules-2.6.17-2-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 236
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.17-2-powerpc-di
Provides: nic-shared-modules
Description: Shared NIC drivers
This package contains NIC drivers needed by combinations of nic-modules,
nic-extra-modules, and nic-pcmcia-modules.
Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 144
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
This package will skip installing a boot-loader
Installer-Menu-Item: 77
Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
This package is to be used by boot loader installers to detect other OSes
available on a system, in a generic format, which it can then adapt to its
own configuration format.
Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 36
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.43), libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for finding partitions
Helper program for finding partitions and detecting their size and
existing file system.
Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 76
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-2.1
Depends: libc6 (>= 2.3.5-1), libparted1.7-udeb (>= 1.7.1-1)
Provides: parted
Description: The GNU Parted disk partition resizing program
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package is similar to the "big" parted package, but has
less cosmetical features resulting in smaller binary. Intended
to be used in debian-installer.
.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 400
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 57
Depends: cdebconf-udeb, di-utils, partman-base, partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)
Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 136
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 15
Depends: cdebconf-udeb, partman-base (>= 73), partman-auto (>= 55), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM
Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 872
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 94
Depends: libc6 (>= 2.3.5-1), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42
Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 564
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 48
Depends: e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32
Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 31
Provides: partman-method
Description: Basic partition usage methods for partman
This package provides partman with two methods to use partitions.
The first is to format the partition. The second is to keep and use
the existing data in the partition as it is.
Package: partman-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 740
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 13
Depends: partman-base (>= 87), libc6 (>= 2.3.5-1), cdebconf-udeb
Description: Add to partman support for block device encryption
Package: partman-crypto-dm
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 60
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 13
Depends: partman-crypto, crypto-modules, cryptsetup-udeb, cdebconf-newt-entropy (>= 0.3)
Description: Add to partman support for dm-crypt encryption
Package: partman-crypto-loop
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 80
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 13
Depends: partman-crypto, loop-aes-modules, mount-aes-udeb, gnupg-udeb, cdebconf-newt-entropy (>= 0.3)
Description: Add to partman support for loop-AES encryption
Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 41
Depends: e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3
Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 252
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 17
Depends: jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman
Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 600
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 46
Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb
Description: Adds support for LVM to partman
Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 152
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 29
Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87)
Description: Add to partman support for MD
Package: partman-newworld
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 124
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 14
Depends: partman-base, hfs-modules
Description: partman support for new-world PowerMac boot partitions
This package provides the 'newworld' partition use method. The yaboot
boot loader used on PCI-era PowerMac systems requires a special
Apple_Bootstrap partition, created by this method.
Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 360
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 41
Depends: cdebconf-udeb
Description: Partitioning operations for partman
This udeb provides partman with editing operations for creation
of new partitions, deletion of partitions and initialisation of the
partition table.
Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 31
Depends: mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs
Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 284
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 45
Depends: partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
This udeb allows the user to choose how partitions should be used.
Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 29
Depends: xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs
Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 28
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.09
Depends: apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70
Package: reiserfs-modules-2.6.17-2-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 384
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.17-2-powerpc-di
Provides: reiserfs-modules
Description: Reiser filesystem support
This package contains the Reiser filesystem module for the Linux kernel.
Package: sata-modules-2.6.17-2-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 396
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.17-2-powerpc-di, scsi-core-modules-2.6.17-2-powerpc-di
Provides: sata-modules
Description: SATA drivers
This package contains SATA drivers for the Linux kernel.
Package: scsi-extra-modules-2.6.17-2-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1088
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: scsi-modules-2.6.17-2-powerpc-di, scsi-core-modules-2.6.17-2-powerpc-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
This package contains uncommon SCSI drivers for the Linux kernel.
This includes SCSI RAID drivers, and some of the less common SCSI
controllers.
Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 276
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.10
Depends: localechooser
Description: choose timezone
Installer-Menu-Item: 62
Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 296
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.5
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63
Package: wireless-tools-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: Guus Sliepen <guus@debian.org>
Version: 28-1
Depends: libc6 (>= 2.3.5-1), libiw28-udeb (>= 28)
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: xfs-modules-2.6.17-2-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 640
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: kernel-image-2.6.17-2-powerpc-di
Provides: xfs-modules
Description: XFS filesystem support
This package contains the XFS filesystem module for the Linux kernel.
Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 268
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.8.11-1
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Description: A stripped-down version of xfsprogs, for debian-installer
This package is an xfsprogs package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: yaboot-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 256
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.1.7
Depends: kernel-installer, partconf-find-partitions (>= 1.08), di-utils (>= 1.15), di-utils-mapdevfs, os-prober, archdetect
Provides: bootable-system
Description: Install yaboot on a hard disk
This package will install yaboot on the hard disk.
Installer-Menu-Item: 73
Package: zlib1g-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 108
Maintainer: Mark Brown <broonie@debian.org>
Version: 1:1.2.3-13
Provides: zlib1g
Description: compression library - runtime for Debian installer
zlib is a library implementing the deflate compression method found
in gzip and PKZIP. This minimal package includes the shared library
for use with the Debian installer.
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: powerpc (ppc)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.17-2-powerpc
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
installation-report depends on no packages.
Versions of packages installation-report recommends:
ii reportbug 3.29.5 reports bugs in the Debian distrib
-- no debconf information
Reply to: