[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#377486: installation-reports

Package: installation-reports



uname -a:
  Linux thhpc 2.6.15-1-em64t-p4 #2 Tue Mar 7 07:51:41 UTC 2006 x86_64 GNU/Linux

  July 9, 2006, 15:00

  How did you install?    Install from full CD 1.
  What did you boot off?  Boot from CD.

  Desktop PC.

  Intel Pentium D 930 (Dual Core, EM64T)

  1 GB

Root Device:
  SATA hard disk

Root Size/partition table:
  Disk /dev/sda: 250.0 GB, 250059350016 bytes
  255 heads, 63 sectors/track, 30401 cylinders
  Units = cylinders of 16065 * 512 = 8225280 bytes

     Device Boot    Start       End      Blocks   Id  System     mounted
  /dev/sda1   *         1      6527    52428096    7  HPFS/NTFS  (WinXP)
  /dev/sda2          6528      9018    20008957+  83  Linux      (/: i386)
  /dev/sda4          9019     30401   171758947+   5  Extended
  /dev/sda5          9019     10843    14659281   83  Linux      (/: amd64) 
  /dev/sda6         10844     11093     2008093+  82  Linux swap
  /dev/sda7         11094     11218     1004031   83  Linux      (/var: i386)
  /dev/sda8         11219     14866    29302528+  83  Linux      (/home)
  /dev/sda9         14867     22162    58605088+  83  Linux      (/tmp)
  /dev/sda10        22163     30401    66179736   83  Linux      (/mnt/src)

Output of lspci and lspci -n:
    0000:00:00.0 Host bridge: Intel Corporation 945G/P Memory Controller Hub (rev 02)
    0000:00:01.0 PCI bridge: Intel Corporation 945G/P PCI Express Graphics Port (rev 02)
    0000:00:1b.0 0403: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
    0000:00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
    0000:00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01)
    0000:00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)
    0000:00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)
    0000:00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)
    0000:00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01)
    0000:00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
    0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
    0000:00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
    0000:00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
    0000:00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controllers cc=IDE (rev 01)
    0000:00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
    0000:01:00.0 Ethernet controller: Marvell Technology Group Ltd. Marvell W8300 802.11 Adapter (rev 07)
    0000:02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.: Unknown device 8168 (rev 01)
    0000:04:00.0 VGA compatible controller: nVidia Corporation GeForce 6200 TurboCache(TM) (rev a1)

  lspci -n:
    0000:00:00.0 0600: 8086:2770 (rev 02)
    0000:00:01.0 0604: 8086:2771 (rev 02)
    0000:00:1b.0 0403: 8086:27d8 (rev 01)
    0000:00:1c.0 0604: 8086:27d0 (rev 01)
    0000:00:1c.3 0604: 8086:27d6 (rev 01)
    0000:00:1d.0 0c03: 8086:27c8 (rev 01)
    0000:00:1d.1 0c03: 8086:27c9 (rev 01)
    0000:00:1d.2 0c03: 8086:27ca (rev 01)
    0000:00:1d.3 0c03: 8086:27cb (rev 01)
    0000:00:1d.7 0c03: 8086:27cc (rev 01)
    0000:00:1e.0 0604: 8086:244e (rev e1)
    0000:00:1f.0 0601: 8086:27b8 (rev 01)
    0000:00:1f.1 0101: 8086:27df (rev 01)
    0000:00:1f.2 0101: 8086:27c0 (rev 01)
    0000:00:1f.3 0c05: 8086:27da (rev 01)
    0000:01:00.0 0200: 11ab:1fa6 (rev 07)
    0000:02:00.0 0200: 10ec:8168 (rev 01)
    0000:04:00.0 0300: 10de:0161 (rev a1)

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [E]
Config network:         [ ]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [ ]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [O]

    Since it is quite often that the kernel and device drivers comes with
    the Linux distribution cannot support the new hardware, for example,
    in my desktop there is no support to my wireless card and my on-board
    Gigabit card, I often want to recompile the newest version kernel and
    search for the solutions to support these device in the net. Therefore,
    the necessary softwares to compile the kernel is essential to me.

    Without network supporting, I decide to install Debian from the first
    CD, and hope that after recompiling kernel and accessing to the network,
    I can continue to install other softwares from the Debian mirror site.
    But I found that the libncurses-dev package is not available in the
    first CD. I need it to configure the kernel options via "make menuconfig".
    Therefore, it would be better to include the libncurses-dev in the
    first CD, and also other packages which could make building kernel

Install logs and other status info is available in /var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.

Reply to: