hppa boot kernel panic
Hello,
While trying to install a debian 3.1r1 netinstall for hppa on a HP9000 class
K100 based on PARISC 1.1, I obtain a kernel panic that i don't understand. Can
someone have had the same problem and could give me hand?
thanks
Configuration Menu: Enter command > bo p4 vga=ask
Interact with IPL (Y or N)?> n
Booting...
Boot IO Dependent Code (IODC) revision 0
HARD Booted.
palo ipl 1.5 root@c3k Fri May 14 16:17:38 MDT 2004
Boot image contains:
0/vmlinux32 4319117 bytes @ 0xe4e800
0/vmlinux64 5820539 bytes @ 0x8c1000
0/ramdisk 6233937 bytes @ 0x2c6000(see /etc/issue)
Information: No console specified on kernel command line. This is normal.ord:
Please wait...checking for disk quotas
PALO will choose the console currently used by firmware (serial). Rights
Reserved.
Command line for kernel: 'root=/dev/ram ramdisk_size=16384 init=/linuxrc
consolev. of California
=ttyB0 TERM=vt102 palo_kernel=0/vmlinux'1986 Novell, Inc.
Selected kernel: /vmlinux from partition 0Sun Microsystems, Inc.
Selected ramdisk: /ramdisk from partition 0 1986, 1988 Massachusetts Institute
of Tech
Warning: kernel name doesn't end with 32 or 64 -- Guessing... Choosing 32-bit
keright 1989-1993 The Open Software Foundation, Inc.
rnelELF32 executable
(c)Copyrigh
Entry 00100000 first 00100
Segment 1 load 00324000 size 1056901 mediaptr 0x225000
(c)Copyright 1989-1991 The University of Maryland
Loading ramdisk 6233937 bytes @ 199fd000...
(c)Copyright 1988 Carnegie Mellon Unive
Branching to kernel entry point 0x00100000. If this is the last
RESTRICTED RIGHTS LEGEND
message you see, you may need to switch your console. This is U.S. Government
is subject to
a common symptom -- search the FAQ and mailing list at parisc-linux.orgragraph
(c)(1)(ii) of the Rights in
Linux version 2.6.8-2-32 (kyle@caradhras) (gcc version 3.3.5 (Debian
1:3.3.5-7))DFARS 252.227-7013.
#1 Tue Feb 8 00:15:05 EST 2005 Hewlett-Packard Company
FP[0] enabled: Rev 1 Model 11
The 32-bit Kernel has
CPUID vers 11 rev 10 (0x0000016a)mail.
Value of TER
model 9000/809/K100t100".
Total Memory: 416 Mb
WARNING: YOU A
initrd: 299fd000-29feef51
# ec
initrd: reserving 199fd000-19feef51 (mem_max 1a000000) terminal version of
sam...
drivers/parisc/led.c: KittyHawk-Machine (hversion 0x580) found, LED detection
sko move between screen elements
ipped. the a
LCD display at f0190000,f0190001 registered
Built 1 zonelists" for context-sen
Kernel command line: root=/dev/ram ramdisk_size=16384 init=/linuxrc
On screens with a menuba
Memory: 425984k availabled
Calibrating delay loop... 99.73 BogoMIPS menu or select a menu item
Security Scaffold v1.0.0 initialized
- use "Tab" to move from the
Capability LSM initialized selecting a menu item
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
- use the spacebar to select an item in th
checking if image is initramfs...it isn't (no cpio magic); looks like an
initrdRL-K" for more information on
EISA bus registered
Searching for devices...
Found devices:
1. U2-IOA BC Runway Port at 0xfff88000 [8] { 12, 0x7, 0x580, 0x0000b }
[ af [ address [ dest_addr ] ] [ up ] [ down ][ netmask mas
2. KittyHawk GSY Core FW-SCSI at 0xf1000000 [8/0] { 4, 0x0, 0x015, 0x00089 }
[ metric n ]
[ trailers | -trailers ]
3. Gecko BOA BC GSC+ Port at 0xf1004000 [8/4] { 7, 0x0, 0x500, 0x0000c }
# ifconfig lan0
lan0: flags=862<BROADCAST,NOTRAILERS,R
4. Eole CAP/MUX at 0xf1100000 [8/4/0] { 5, 0x0, 0x015, 0x0000d }
# ifconfig lan0 192.168.0.1
#
5. Solaris Direct Connect MUX (J2092A) at 0xf1110000 [8/4/16] { 5, 0x0, 0x009, 0
*******************************LAN/9000 NETWORKING*******
x0000d }********
6. Gecko BOA BC HP-PB Port at 0xf113c000 [8/4/
tcp 0 0 *.portmap
[<1012aa98>] register_console+0x1fc/0x214
[<103e768c>] serial8250_late_console_init+0x30/0x38 *.*
[<103d9348>] do_initcalls+0x
[<103d9348>] do_initcalls+0x
Kernel Fault: Code=13 regs=10810380 (Addr=00000000)
YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW: 00000000000001001111111100001111 Not tainted
r00-03 00000000 ffffffff 1022bb68 1044c9a0
r04-07 00000000 10810248 00000013 10360010
r08-11 1035f000 00000000 4d597e80 10431a40
r12-15 1035f1b0 3b9aca00 10361810 10431810
r16-19 f0001570 f0000074 f000006c 00009600
r20-23 00000000 01000000 00000cb0 00000000
r24-27 00000000 00000000 00000000 10347010
r28-31 00000000 00000005 10810380 102269ec
sr0-3 00000000 00000000 00000000 00000000
sr4-7 00000000 00000000 00000000 00000000
IASQ: 00000000 00000000 IAOQ: 101f981c 101f9820
IIR: b3202000 ISR: 00000000 IOR: 00000000
CPU: 0 CR30: 10810000 CR31: 103d0000
ORIG_R28: 00000000
IAOQ[0]: $$divU+0xc/0x210
IAOQ[1]: $$divU+0x10/0x210
RP(r2): serial8250_get_divisor+0x44/0x50
Kernel panic: Kernel Fault
--
Julien Leveugle
59 rue des stations Apt24
59000 LILLE
FRANCE
tel : +33 6.76.77.14.74
Reply to: