--- Begin Message ---
Package: installation-reports
Version: 2.14
Severity: normal
-- Package-specific info:
Boot method: CD
Image version: http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/i386/iso-cd/debian-testing-i386-netinst.iso (May 17th)
Date: May 21, 2006
Machine: IBM/Lenovo M52 8215 K4U
Partitions: <df -Tl will do; the raw partition table is preferred>
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/sda1 ext3 918322 137226 732100 16% /
tmpfs tmpfs 453376 0 453376 0% /dev/shm
/dev/sda8 ext3 48078504 132980 45503244 1% /home
/dev/sda7 ext3 918322 16549 852777 2% /tmp
/dev/sda5 ext3 14421344 1323872 12364912 10% /usr
/dev/sda6 ext3 7692876 698012 6604088 10% /var
tmpfs tmpfs 453376 116 453260 1% /dev
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [E]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [E]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Installed system ok: [O]
Comments/Problems:
I followed the instructions in the wiki to get the sata connected CDROM
detected. Initially I had some troubles partitioning (something about
difficulties notifying the kernel of changes). This was possibly a
consequence of messing about with LVM. After a clean 1 partition
install, I was able to manually partition and everything installed
smoothly.
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report.
Once you have filled out this report, mail it to submit@bugs.debian.org.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="3.1 (installer build 20060517)"
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux newconvxe 2.6.16-1-486 #2 Thu May 4 18:15:54 UTC 2006 i686 unknown
lspci -v -t: -[00]-+-00.0 Intel Corporation 945G/P Memory Controller Hub
lspci -v -t: +-02.0 Intel Corporation 945G Integrated Graphics Controller
lspci -v -t: +-02.1 Intel Corporation 945G Integrated Graphics Controller
lspci -v -t: +-1b.0 Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller
lspci -v -t: +-1c.0-[02]----00.0 Intel Corporation 82573E Gigabit Ethernet Controller (Copper)
lspci -v -t: +-1c.1-[04]--
lspci -v -t: +-1d.0 Intel Corporation 82801G (ICH7 Family) USB UHCI #1
lspci -v -t: +-1d.1 Intel Corporation 82801G (ICH7 Family) USB UHCI #2
lspci -v -t: +-1d.2 Intel Corporation 82801G (ICH7 Family) USB UHCI #3
lspci -v -t: +-1d.3 Intel Corporation 82801G (ICH7 Family) USB UHCI #4
lspci -v -t: +-1d.7 Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller
lspci -v -t: +-1e.0-[0a]--
lspci -v -t: +-1f.0 Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge
lspci -v -t: +-1f.2 Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controllers cc=IDE
lspci -v -t: \-1f.3 Intel Corporation 82801G (ICH7 Family) SMBus Controller
lspci -n: 0000:00:00.0 0600: 8086:2770 (rev 02)
lspci -n: 0000:00:02.0 0300: 8086:2772 (rev 02)
lspci -n: 0000:00:02.1 0380: 8086:2776 (rev 02)
lspci -n: 0000:00:1b.0 0403: 8086:27d8 (rev 01)
lspci -n: 0000:00:1c.0 0604: 8086:27d0 (rev 01)
lspci -n: 0000:00:1c.1 0604: 8086:27d2 (rev 01)
lspci -n: 0000:00:1d.0 0c03: 8086:27c8 (rev 01)
lspci -n: 0000:00:1d.1 0c03: 8086:27c9 (rev 01)
lspci -n: 0000:00:1d.2 0c03: 8086:27ca (rev 01)
lspci -n: 0000:00:1d.3 0c03: 8086:27cb (rev 01)
lspci -n: 0000:00:1d.7 0c03: 8086:27cc (rev 01)
lspci -n: 0000:00:1e.0 0604: 8086:244e (rev e1)
lspci -n: 0000:00:1f.0 0601: 8086:27b8 (rev 01)
lspci -n: 0000:00:1f.2 0101: 8086:27c0 (rev 01)
lspci -n: 0000:00:1f.3 0c05: 8086:27da (rev 01)
lspci -n: 0000:02:00.0 0200: 8086:108c (rev 03)
lspci -v: 0000:00:00.0 Host bridge: Intel Corporation 945G/P Memory Controller Hub (rev 02)
lspci -v: Subsystem: IBM: Unknown device 02f9
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Capabilities: [e0] #09 [5109]
lspci -v:
lspci -v: 0000:00:02.0 VGA compatible controller: Intel Corporation 945G Integrated Graphics Controller (rev 02)
lspci -v: Subsystem: IBM: Unknown device 02f9
lspci -v: Flags: fast devsel, IRQ 5
lspci -v: Memory at d0100000 (32-bit, non-prefetchable) [size=512K]
lspci -v: I/O ports at 30c0 [size=8]
lspci -v: Memory at c0000000 (32-bit, prefetchable) [size=256M]
lspci -v: Memory at d0180000 (32-bit, non-prefetchable) [size=256K]
lspci -v: Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
lspci -v: Capabilities: [d0] Power Management version 2
lspci -v:
lspci -v: 0000:00:02.1 Display controller: Intel Corporation 945G Integrated Graphics Controller (rev 02)
lspci -v: Subsystem: IBM: Unknown device 02f9
lspci -v: Flags: fast devsel
lspci -v: Memory at 50000000 (32-bit, non-prefetchable) [disabled] [size=512K]
lspci -v: Capabilities: [d0] Power Management version 2
lspci -v:
lspci -v: 0000:00:1b.0 0403: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
lspci -v: Subsystem: IBM: Unknown device 02f9
lspci -v: Flags: bus master, fast devsel, latency 0, IRQ 9
lspci -v: Memory at d01c0000 (64-bit, non-prefetchable) [size=16K]
lspci -v: Capabilities: [50] Power Management version 2
lspci -v: Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
lspci -v: Capabilities: [70] #10 [0091]
lspci -v:
lspci -v: 0000:00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
lspci -v: I/O behind bridge: 00004000-00004fff
lspci -v: Memory behind bridge: d0000000-d00fffff
lspci -v: Capabilities: [40] #10 [0141]
lspci -v: Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
lspci -v: Capabilities: [90] #0d [0000]
lspci -v: Capabilities: [a0] Power Management version 2
lspci -v:
lspci -v: 0000:00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01)
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
lspci -v: Capabilities: [40] #10 [0141]
lspci -v: Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
lspci -v: Capabilities: [90] #0d [0000]
lspci -v: Capabilities: [a0] Power Management version 2
lspci -v:
lspci -v: 0000:00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)
lspci -v: Subsystem: IBM: Unknown device 02f9
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 209
lspci -v: I/O ports at 3000 [size=32]
lspci -v:
lspci -v: 0000:00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)
lspci -v: Subsystem: IBM: Unknown device 02f9
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 217
lspci -v: I/O ports at 3020 [size=32]
lspci -v:
lspci -v: 0000:00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)
lspci -v: Subsystem: IBM: Unknown device 02f9
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 225
lspci -v: I/O ports at 3040 [size=32]
lspci -v:
lspci -v: 0000:00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01)
lspci -v: Subsystem: IBM: Unknown device 02f9
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 177
lspci -v: I/O ports at 3060 [size=32]
lspci -v:
lspci -v: 0000:00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20)
lspci -v: Subsystem: IBM: Unknown device 02f9
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 209
lspci -v: Memory at d03c4000 (32-bit, non-prefetchable) [size=1K]
lspci -v: Capabilities: [50] Power Management version 2
lspci -v: Capabilities: [58] #0a [20a0]
lspci -v:
lspci -v: 0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01)
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=32
lspci -v: Capabilities: [50] #0d [0000]
lspci -v:
lspci -v: 0000:00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
lspci -v: Subsystem: IBM: Unknown device 02f9
lspci -v: Flags: bus master, medium devsel, latency 0
lspci -v: Capabilities: [e0] #09 [100c]
lspci -v:
lspci -v: 0000:00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controllers cc=IDE (rev 01) (prog-if 80 [Master])
lspci -v: Subsystem: IBM: Unknown device 02f9
lspci -v: Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 217
lspci -v: I/O ports at <unassigned>
lspci -v: I/O ports at <unassigned>
lspci -v: I/O ports at <unassigned>
lspci -v: I/O ports at <unassigned>
lspci -v: I/O ports at 30b0 [size=16]
lspci -v: Capabilities: [70] Power Management version 2
lspci -v:
lspci -v: 0000:00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
lspci -v: Subsystem: IBM: Unknown device 02f9
lspci -v: Flags: medium devsel, IRQ 9
lspci -v: I/O ports at 3080 [size=32]
lspci -v:
lspci -v: 0000:02:00.0 Ethernet controller: Intel Corporation 82573E Gigabit Ethernet Controller (Copper) (rev 03)
lspci -v: Subsystem: IBM: Unknown device 02f9
lspci -v: Flags: bus master, fast devsel, latency 0, IRQ 233
lspci -v: Memory at d0080000 (32-bit, non-prefetchable) [size=128K]
lspci -v: Memory at d0000000 (32-bit, non-prefetchable) [size=512K]
lspci -v: I/O ports at 4000 [size=32]
lspci -v: Capabilities: [c8] Power Management version 2
lspci -v: Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable+
lspci -v: Capabilities: [e0] #10 [0001]
lspci -v:
lspci -x: 0000:00:00.0 Host bridge: Intel Corporation 945G/P Memory Controller Hub (rev 02)
lspci -x: 00: 86 80 70 27 06 01 90 20 02 00 00 06 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 f9 02
lspci -x: 30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 0000:00:02.0 VGA compatible controller: Intel Corporation 945G Integrated Graphics Controller (rev 02)
lspci -x: 00: 86 80 72 27 03 00 90 00 02 00 00 03 00 00 80 00
lspci -x: 10: 00 00 10 d0 c1 30 00 00 08 00 00 c0 00 00 18 d0
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 f9 02
lspci -x: 30: 00 00 00 00 90 00 00 00 00 00 00 00 05 01 00 00
lspci -x:
lspci -x: 0000:00:02.1 Display controller: Intel Corporation 945G Integrated Graphics Controller (rev 02)
lspci -x: 00: 86 80 76 27 00 00 90 00 02 00 80 03 00 00 80 00
lspci -x: 10: 00 00 00 50 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 f9 02
lspci -x: 30: 00 00 00 00 d0 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 0000:00:1b.0 0403: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
lspci -x: 00: 86 80 d8 27 06 01 10 00 01 00 03 04 08 00 00 00
lspci -x: 10: 04 00 1c d0 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 f9 02
lspci -x: 30: 00 00 00 00 50 00 00 00 00 00 00 00 09 01 00 00
lspci -x:
lspci -x: 0000:00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
lspci -x: 00: 86 80 d0 27 07 04 10 00 01 00 04 06 08 00 81 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 02 02 00 40 40 00 00
lspci -x: 20: 00 d0 00 d0 f1 ff 01 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 04 00
lspci -x:
lspci -x: 0000:00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01)
lspci -x: 00: 86 80 d2 27 04 04 10 00 01 00 04 06 08 00 81 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 04 04 00 f0 00 00 20
lspci -x: 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 05 02 00 00
lspci -x:
lspci -x: 0000:00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)
lspci -x: 00: 86 80 c8 27 05 00 80 02 01 00 03 0c 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 01 30 00 00 00 00 00 00 00 00 00 00 14 10 f9 02
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00
lspci -x:
lspci -x: 0000:00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)
lspci -x: 00: 86 80 c9 27 05 00 80 02 01 00 03 0c 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 21 30 00 00 00 00 00 00 00 00 00 00 14 10 f9 02
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 09 02 00 00
lspci -x:
lspci -x: 0000:00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)
lspci -x: 00: 86 80 ca 27 05 00 80 02 01 00 03 0c 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 41 30 00 00 00 00 00 00 00 00 00 00 14 10 f9 02
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 03 00 00
lspci -x:
lspci -x: 0000:00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01)
lspci -x: 00: 86 80 cb 27 05 00 80 02 01 00 03 0c 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 61 30 00 00 00 00 00 00 00 00 00 00 14 10 f9 02
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 04 00 00
lspci -x:
lspci -x: 0000:00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
lspci -x: 00: 86 80 cc 27 06 01 90 02 01 20 03 0c 00 00 00 00
lspci -x: 10: 00 40 3c d0 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 f9 02
lspci -x: 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 00 00
lspci -x:
lspci -x: 0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
lspci -x: 00: 86 80 4e 24 07 01 10 00 e1 01 04 06 00 00 01 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 0a 0a 20 f0 00 80 22
lspci -x: 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 04 00
lspci -x:
lspci -x: 0000:00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
lspci -x: 00: 86 80 b8 27 07 01 10 02 01 00 01 06 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 f9 02
lspci -x: 30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 0000:00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controllers cc=IDE (rev 01)
lspci -x: 00: 86 80 c0 27 05 00 b0 02 01 80 01 01 00 00 00 00
lspci -x: 10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
lspci -x: 20: b1 30 00 00 00 00 00 00 00 00 00 00 14 10 f9 02
lspci -x: 30: 00 00 00 00 70 00 00 00 00 00 00 00 ff 02 00 00
lspci -x:
lspci -x: 0000:00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
lspci -x: 00: 86 80 da 27 01 01 80 02 01 00 05 0c 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 81 30 00 00 00 00 00 00 00 00 00 00 14 10 f9 02
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 09 02 00 00
lspci -x:
lspci -x: 0000:02:00.0 Ethernet controller: Intel Corporation 82573E Gigabit Ethernet Controller (Copper) (rev 03)
lspci -x: 00: 86 80 8c 10 07 05 10 00 03 00 00 02 10 00 00 00
lspci -x: 10: 00 00 08 d0 00 00 00 d0 01 40 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 f9 02
lspci -x: 30: 00 00 00 00 c8 00 00 00 00 00 00 00 05 01 00 00
lspci -x:
lsmod: Module Size Used by
lsmod: qnx4 10612 0
lsmod: ntfs 189580 0
lsmod: xfs 483476 0
lsmod: exportfs 5248 1 xfs
lsmod: reiserfs 218352 0
lsmod: jfs 158556 0
lsmod: ext3 115976 5
lsmod: jbd 46996 1 ext3
lsmod: vfat 11520 0
lsmod: fat 46876 1 vfat
lsmod: e1000 96180 0
lsmod: nls_iso8859_1 4224 0
lsmod: rsrc_nonstatic 12160 0
lsmod: pcmcia_core 37392 1 rsrc_nonstatic
lsmod: isofs 32192 0
lsmod: ide_cd 35488 0
lsmod: ide_disk 14976 0
lsmod: ide_generic 1408 0 [permanent]
lsmod: pdc202xx_new 8064 0 [permanent]
lsmod: aec62xx 6784 0 [permanent]
lsmod: alim15x3 11024 0 [permanent]
lsmod: amd74xx 12956 0 [permanent]
lsmod: atiixp 5392 0 [permanent]
lsmod: cmd64x 10012 0 [permanent]
lsmod: cs5520 4608 0 [permanent]
lsmod: cs5530 4864 0 [permanent]
lsmod: cs5535 4224 0 [permanent]
lsmod: cy82c693 4356 0 [permanent]
lsmod: hpt34x 4992 0 [permanent]
lsmod: it821x 7812 0 [permanent]
lsmod: ns87415 4268 0 [permanent]
lsmod: opti621 4100 0 [permanent]
lsmod: pdc202xx_old 9600 0 [permanent]
lsmod: piix 9092 0 [permanent]
lsmod: rz1000 2688 0 [permanent]
lsmod: sc1200 6656 0 [permanent]
lsmod: serverworks 8328 0 [permanent]
lsmod: siimage 11008 0 [permanent]
lsmod: sis5513 12300 0 [permanent]
lsmod: slc90e66 5120 0 [permanent]
lsmod: triflex 3712 0 [permanent]
lsmod: trm290 4100 0 [permanent]
lsmod: via82cxxx 8196 0 [permanent]
lsmod: floppy 55852 0
lsmod: usb_storage 69696 0
lsmod: vga16fb 11528 2
lsmod: vgastate 7680 1 vga16fb
lsmod: usbserial 28364 0
lsmod: usbhid 32352 0
lsmod: usbkbd 6656 0
lsmod: sg 30492 0
lsmod: sr_mod 16036 0
lsmod: cdrom 32176 2 ide_cd,sr_mod
lsmod: sd_mod 16528 7
lsmod: generic 4356 0 [permanent]
lsmod: ide_core 111280 30 ide_cd,ide_disk,ide_generic,pdc202xx_new,aec62xx,alim15x3,amd74xx,atiixp,cmd64x,cs5520,cs5530,cs5535,cy82c693,hpt34x,it821x,ns87415,opti621,pdc202xx_old,piix,rz1000,sc1200,serverworks,siimage,sis5513,slc90e66,triflex,trm290,via82cxxx,usb_storage,generic
lsmod: thermal 13192 0
lsmod: processor 21696 1 thermal
lsmod: fan 4740 0
lsmod: ata_piix 9988 6
lsmod: libata 52752 1 ata_piix
lsmod: scsi_mod 122444 5 usb_storage,sg,sr_mod,sd_mod,libata
lsmod: parport_pc 31728 0
lsmod: parport 31944 1 parport_pc
lsmod: ehci_hcd 27144 0
lsmod: uhci_hcd 27152 0
lsmod: usbcore 111008 7 usb_storage,usbserial,usbhid,usbkbd,ehci_hcd,uhci_hcd
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 512928 448 512480 0% /dev
df: tmpfs 512928 448 512480 0% /dev
df: tmpfs 512928 448 512480 0% /.dev
df: /dev/scsi/host0/bus0/target0/lun0/part1 918322 87932 781394 10% /target
df: /dev/scsi/host0/bus0/target0/lun0/part8 48078504 131276 45504948 0% /target/home
df: /dev/scsi/host0/bus0/target0/lun0/part7 918322 16466 852860 2% /target/tmp
df: /dev/scsi/host0/bus0/target0/lun0/part5 14421344 1323600 12365184 10% /target/usr
df: /dev/scsi/host0/bus0/target0/lun0/part6 7692876 672484 6629616 9% /target/var
free: total used free shared buffers
free: Mem: 1025856 997700 28156 0 69260
free: Swap: 4883752 444 4883308
free: Total: 5909608 998144 4911464
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 32: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 33: cardctl: not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 15
/proc/cpuinfo: model : 6
/proc/cpuinfo: model name : Intel(R) Pentium(R) D CPU 3.00GHz
/proc/cpuinfo: stepping : 2
/proc/cpuinfo: cpu MHz : 2993.803
/proc/cpuinfo: cache size : 2048 KB
/proc/cpuinfo: fdiv_bug : no
/proc/cpuinfo: hlt_bug : no
/proc/cpuinfo: f00f_bug : no
/proc/cpuinfo: coma_bug : no
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 6
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl vmx cid cx16 xtpr lahf_lm
/proc/cpuinfo: bogomips : 5994.11
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 0170-0177 : libata
/proc/ioports: 01f0-01f7 : libata
/proc/ioports: 02f8-02ff : serial
/proc/ioports: 0378-037a : parport0
/proc/ioports: 03c0-03df : vga+
/proc/ioports: 03f8-03ff : serial
/proc/ioports: 0778-077a : parport0
/proc/ioports: 1000-107f : motherboard
/proc/ioports: 1000-1003 : PM1a_EVT_BLK
/proc/ioports: 1008-100b : PM_TMR
/proc/ioports: 1010-1015 : ACPI CPU throttle
/proc/ioports: 1028-102f : GPE0_BLK
/proc/ioports: 1100-111f : motherboard
/proc/ioports: 1180-11bf : motherboard
/proc/ioports: 3000-301f : 0000:00:1d.0
/proc/ioports: 3000-301f : uhci_hcd
/proc/ioports: 3020-303f : 0000:00:1d.1
/proc/ioports: 3020-303f : uhci_hcd
/proc/ioports: 3040-305f : 0000:00:1d.2
/proc/ioports: 3040-305f : uhci_hcd
/proc/ioports: 3060-307f : 0000:00:1d.3
/proc/ioports: 3060-307f : uhci_hcd
/proc/ioports: 3080-309f : 0000:00:1f.3
/proc/ioports: 30b0-30bf : 0000:00:1f.2
/proc/ioports: 30b0-30bf : libata
/proc/ioports: 30c0-30c7 : 0000:00:02.0
/proc/ioports: 4000-4fff : PCI Bus #02
/proc/ioports: 4000-401f : 0000:02:00.0
/proc/ioports: 4000-401f : e1000
/proc/ioports: e000-e00f : motherboard
/proc/ioports: fe00-fe00 : motherboard
/proc/ioports: fe10-fe11 : motherboard
/proc/ioports: fe10-fe11 : PM1a_CNT_BLK
/proc/iomem: 00000000-0009f7ff : System RAM
/proc/iomem: 00000000-00000000 : Crash kernel
/proc/iomem: 0009f800-0009ffff : reserved
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000c7fff : Video ROM
/proc/iomem: 000cb000-000cbfff : Adapter ROM
/proc/iomem: 000cc000-000ccfff : Adapter ROM
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-3f52ffff : System RAM
/proc/iomem: 00100000-00272f12 : Kernel code
/proc/iomem: 00272f13-00300c23 : Kernel data
/proc/iomem: 3f530000-3f536fff : ACPI Tables
/proc/iomem: 3f537000-3f5fffff : ACPI Non-volatile Storage
/proc/iomem: 3f600000-3fffffff : reserved
/proc/iomem: 50000000-5007ffff : 0000:00:02.1
/proc/iomem: c0000000-cfffffff : 0000:00:02.0
/proc/iomem: d0000000-d00fffff : PCI Bus #02
/proc/iomem: d0000000-d007ffff : 0000:02:00.0
/proc/iomem: d0000000-d007ffff : e1000
/proc/iomem: d0080000-d009ffff : 0000:02:00.0
/proc/iomem: d0080000-d009ffff : e1000
/proc/iomem: d0100000-d017ffff : 0000:00:02.0
/proc/iomem: d0180000-d01bffff : 0000:00:02.0
/proc/iomem: d01c0000-d01c3fff : 0000:00:1b.0
/proc/iomem: d03c4000-d03c43ff : 0000:00:1d.7
/proc/iomem: d03c4000-d03c43ff : ehci_hcd
/proc/iomem: e0000000-efffffff : reserved
/proc/iomem: fec00000-fec0ffff : reserved
/proc/iomem: fed1c000-fed1ffff : reserved
/proc/iomem: fee00000-fee00fff : reserved
/proc/iomem: ff000000-ffffffff : reserved
/proc/interrupts: CPU0
/proc/interrupts: 0: 4802666 IO-APIC-edge timer
/proc/interrupts: 1: 1248 IO-APIC-edge i8042
/proc/interrupts: 7: 0 IO-APIC-edge parport0
/proc/interrupts: 9: 0 IO-APIC-level acpi
/proc/interrupts: 14: 81952 IO-APIC-edge libata
/proc/interrupts: 15: 1616 IO-APIC-edge libata
/proc/interrupts: 177: 0 IO-APIC-level uhci_hcd:usb4
/proc/interrupts: 209: 0 IO-APIC-level uhci_hcd:usb1, ehci_hcd:usb5
/proc/interrupts: 217: 0 IO-APIC-level uhci_hcd:usb2
/proc/interrupts: 225: 0 IO-APIC-level uhci_hcd:usb3
/proc/interrupts: 233: 435990 PCI-MSI eth0
/proc/interrupts: NMI: 0
/proc/interrupts: LOC: 4803026
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 1025856 kB
/proc/meminfo: MemFree: 28156 kB
/proc/meminfo: Buffers: 69260 kB
/proc/meminfo: Cached: 841216 kB
/proc/meminfo: SwapCached: 4 kB
/proc/meminfo: Active: 360076 kB
/proc/meminfo: Inactive: 565404 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 1025856 kB
/proc/meminfo: LowFree: 28156 kB
/proc/meminfo: SwapTotal: 4883752 kB
/proc/meminfo: SwapFree: 4883308 kB
/proc/meminfo: Dirty: 4032 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: Mapped: 16744 kB
/proc/meminfo: Slab: 59356 kB
/proc/meminfo: CommitLimit: 5396680 kB
/proc/meminfo: Committed_AS: 18608 kB
/proc/meminfo: PageTables: 216 kB
/proc/meminfo: VmallocTotal: 261840 kB
/proc/meminfo: VmallocUsed: 10464 kB
/proc/meminfo: VmallocChunk: 250252 kB
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
/proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=4 2000000 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
dmidecode: /usr/bin/report-hw: /usr/bin/report-hw: 41: dmidecode: not found
==============================================
Installer status:
==============================================
Package: cdrom-modules-2.6.16-1-486-di
Status: install ok unpacked
Version: 1.30
Provides: cdrom-modules
Depends: ide-modules-2.6.16-1-486-di, cdrom-core-modules-2.6.16-1-486-di, kernel-image-2.6.16-1-486-di
Description: Esoteric CDROM drivers
Package: preseed-common
Status: install ok unpacked
Version: 1.15
Depends: di-utils (>= 1.14)
Description: common files for preseeding
Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone
Package: localechooser
Status: install ok installed
Version: 1.15
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6-7
Description: GNU C Library: NSS helper for DNS - udeb
Package: cdrom-checker
Status: install ok unpacked
Version: 1.06
Depends: cdrom-detect, cdebconf-udeb (>= 0.31)
Description: Verify the cd contents
Installer-Menu-Item: 940
Package: parport-modules-2.6.16-1-486-di
Status: install ok unpacked
Version: 1.30
Provides: parport-modules
Depends: kernel-image-2.6.16-1-486-di
Description: Parallel port support
Package: lowmemcheck
Status: install ok unpacked
Version: 1.17
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode
Package: ide-core-modules-2.6.16-1-486-di
Status: install ok unpacked
Version: 1.30
Provides: ide-core-modules
Depends: kernel-image-2.6.16-1-486-di
Description: IDE support
Package: cdrom-retriever
Status: install ok installed
Version: 1.09
Provides: retriever
Depends: cdrom-detect
Description: Fetch modules from a CDROM
Package: main-menu
Status: install ok unpacked
Version: 1.12
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.41), cdebconf-udeb
Description: Debian installer main menu
Package: sata-modules-2.6.16-1-486-di
Status: install ok unpacked
Version: 1.30
Provides: sata-modules
Depends: kernel-image-2.6.16-1-486-di, scsi-core-modules-2.6.16-1-486-di
Description: SATA drivers
Package: cdrom-core-modules-2.6.16-1-486-di
Status: install ok unpacked
Version: 1.30
Provides: cdrom-core-modules
Depends: kernel-image-2.6.16-1-486-di, scsi-core-modules-2.6.16-1-486-di, ide-modules-2.6.16-1-486-di
Description: CDROM support
Package: di-utils-shell
Status: install ok unpacked
Version: 1.29
Depends: cdebconf-udeb (>= 0.73), di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950
Package: serial-modules-2.6.16-1-486-di
Status: install ok unpacked
Version: 1.30
Provides: serial-modules
Depends: kernel-image-2.6.16-1-486-di, pcmcia-modules-2.6.16-1-486-di
Description: Serial drivers
Package: di-utils
Status: install ok installed
Version: 1.29
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.41)
Description: Miscellaneous utilities for the debian installer
Package: scsi-core-modules-2.6.16-1-486-di
Status: install ok unpacked
Version: 1.30
Provides: scsi-core-modules
Depends: kernel-image-2.6.16-1-486-di
Description: Core SCSI subsystem
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.101
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.6-6), libnewt0.52
Description: Newt frontend for Debian Configuration Management System
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.2.2-2
Depends: libc6 (>= 2.3.5-1)
Description: tools for managing Linux kernel modules
Package: rootskel
Status: install ok installed
Version: 1.31
Depends: di-utils (>= 1.24)
Description: Skeleton root filesystem used by debian-installer
Package: udev-udeb
Status: install ok unpacked
Version: 0.091-2
Depends: libc6 (>= 2.3.6-6)
Description: /dev/ and hotplug management daemon
Package: brltty-udeb
Status: install ok unpacked
Version: 3.7.2-3
Depends: libc6 (>= 2.3.6-6)
Description: Access software for a blind person using a soft braille terminal
Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-3
Depends: libc6 (>= 2.3.5-1)
Description: Free Implementation of the Unicode BiDi algorithm
Package: scsi-modules-2.6.16-1-486-di
Status: install ok unpacked
Version: 1.30
Provides: scsi-modules
Depends: kernel-image-2.6.16-1-486-di, scsi-core-modules-2.6.16-1-486-di, parport-modules-2.6.16-1-486-di, cdrom-core-modules-2.6.16-1-486-di, firmware-modules-2.6.16-1-486-di
Description: SCSI drivers
Package: usb-discover
Status: install ok unpacked
Version: 1.05
Description: Discover USB and load kernel modules
Package: rescue-check
Status: install ok unpacked
Version: 1.3
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested
Package: nano-udeb
Status: install ok unpacked
Version: 1.3.11-2
Provides: editor
Depends: libc6 (>= 2.3.5-1), libslang2-udeb (>= 2.0.1-1)
Description: free Pico clone with some new features - tiny build
Package: cdebconf-udeb
Status: install ok installed
Version: 0.101
Provides: debconf-2.0
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.41), libtextwrap1 (>> 0.01-0)
Description: Debian Configuration Management System (C-implementation)
Package: load-cdrom
Status: install ok installed
Version: 1.09
Depends: cdrom-retriever, anna (>= 1.07)
Description: Load installer components from CD
Installer-Menu-Item: 14
Package: firewire-core-modules-2.6.16-1-486-di
Status: install ok unpacked
Version: 1.30
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.16-1-486-di, kernel-image-2.6.16-1-486-di
Description: Core FireWire drivers
Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.101
Depends: cdebconf-udeb, libc6 (>= 2.3.6-6)
Description: Plain text frontend for Debian Configuration Management System
Package: kernel-image-2.6.16-1-486-di
Status: install ok unpacked
Version: 1.30
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer
Package: fb-modules-2.6.16-1-486-di
Status: install ok unpacked
Version: 1.30
Provides: fb-modules
Depends: kernel-image-2.6.16-1-486-di
Description: Frame buffer support
Package: iso-3166-udeb
Status: install ok installed
Version: 0.51-1
Description: provides iso_3166.tab file
Package: floppy-retriever
Status: install ok unpacked
Version: 1.08
Provides: retriever
Depends: mountfloppy
Description: Fetches modules from a floppy
Package: input-modules-2.6.16-1-486-di
Status: install ok unpacked
Version: 1.30
Provides: input-modules
Depends: kernel-image-2.6.16-1-486-di, usb-modules-2.6.16-1-486-di
Description: Input devices support
Package: pcmcia-modules-2.6.16-1-486-di
Status: install ok unpacked
Version: 1.30
Provides: pcmcia-modules
Depends: kernel-image-2.6.16-1-486-di, firmware-modules-2.6.16-1-486-di
Description: Common PCMCIA drivers
Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.2-1
Depends: libc6 (>= 2.3.6-6)
Description: Tiny utilities for the debian-installer
Package: initrd-preseed
Status: install ok unpacked
Version: 1.15
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd
Package: archdetect
Status: install ok installed
Version: 1.35
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.41)
Description: Hardware architecture detector
Package: save-logs
Status: install ok unpacked
Version: 2.15
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940
Package: scsi-common-modules-2.6.16-1-486-di
Status: install ok unpacked
Version: 1.30
Provides: scsi-common-modules
Depends: kernel-image-2.6.16-1-486-di, scsi-core-modules-2.6.16-1-486-di, cdrom-core-modules-2.6.16-1-486-di
Description: Very common SCSI drivers
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.29
Description: Reboot
Installer-Menu-Item: 995
Package: anna
Status: install ok installed
Version: 1.23
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.41), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: libsysfs2-udeb
Status: install ok unpacked
Version: 2.0.0-7
Provides: libsysfs2
Depends: libc6 (>= 2.3.6-6)
Description: interface library to sysfs
Package: pcmciautils-udeb
Status: install ok unpacked
Version: 013-1
Depends: udev-udeb, libc6 (>= 2.3.5-1), libsysfs2-udeb
Description: PCMCIA utilities for Linux 2.6
Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.1.11-16
Depends: libc6 (>= 2.3.5-1)
Description: Linux PCI Utilities (udeb)
Package: console-keymaps-at
Status: install ok installed
Version: 20060421
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.29
Description: Terminfo entries needed by newt/slang in debian installer
Package: floppy-modules-2.6.16-1-486-di
Status: install ok unpacked
Version: 1.30
Provides: floppy-modules
Depends: kernel-image-2.6.16-1-486-di
Description: Floppy driver
Package: hw-detect
Status: install ok installed
Version: 1.35
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it
Package: kbd-chooser
Status: install ok installed
Version: 1.26
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.41), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.41
Depends: libc6 (>= 2.3.5-1)
Description: Library of common debian-installer functions
Package: acpi-modules-2.6.16-1-486-di
Status: install ok unpacked
Version: 1.30
Provides: acpi-modules
Depends: kernel-image-2.6.16-1-486-di
Description: ACPI support modules
Package: firmware-modules-2.6.16-1-486-di
Status: install ok unpacked
Version: 1.30
Provides: firmware-modules
Depends: kernel-image-2.6.16-1-486-di
Description: Firmware request modules
Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale
Package: env-preseed
Status: install ok unpacked
Version: 1.15
Description: debconf preseeding via environment variables
Package: pcmcia-storage-modules-2.6.16-1-486-di
Status: install ok unpacked
Version: 1.30
Provides: pcmcia-storage-modules
Depends: kernel-image-2.6.16-1-486-di, ide-core-modules-2.6.16-1-486-di, cdrom-core-modules-2.6.16-1-486-di, pcmcia-modules-2.6.16-1-486-di
Description: PCMCIA storage drivers
Package: usb-serial-modules-2.6.16-1-486-di
Status: install ok unpacked
Version: 1.30
Provides: usb-serial-modules
Depends: kernel-image-2.6.16-1-486-di, usb-modules-2.6.16-1-486-di
Description: USB serial drivers
Package: mountfloppy
Status: install ok unpacked
Version: 0.5
Depends: di-utils (>= 1.15)
Description: Mounts a floppy
Package: cdebconf-priority
Status: install ok unpacked
Version: 0.101
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930
Package: file-preseed
Status: install ok unpacked
Version: 1.15
Depends: di-utils, preseed-common
Description: load debconf preseed file
Installer-Menu-Item: 14
Package: usb-modules-2.6.16-1-486-di
Status: install ok unpacked
Version: 1.30
Provides: usb-modules
Depends: kernel-image-2.6.16-1-486-di
Description: USB support
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.101
Depends: libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: usb-storage-modules-2.6.16-1-486-di
Status: install ok unpacked
Version: 1.30
Provides: usb-storage-modules
Depends: ide-core-modules-2.6.16-1-486-di, scsi-core-modules-2.6.16-1-486-di, usb-modules-2.6.16-1-486-di
Description: USB storage support
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.4
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: fat-modules-2.6.16-1-486-di
Status: install ok unpacked
Version: 1.30
Provides: fat-modules
Depends: kernel-image-2.6.16-1-486-di
Description: FAT filesystem support
Package: ide-modules-2.6.16-1-486-di
Status: install ok unpacked
Version: 1.30
Provides: ide-modules
Depends: kernel-image-2.6.16-1-486-di, ide-core-modules-2.6.16-1-486-di
Description: IDE drivers
Package: cdrom-detect
Status: install ok installed
Version: 1.13
Depends: hw-detect, di-utils (>= 1.15)
Description: Detect CDROM devices and mount the CD
Installer-Menu-Item: 14
Package: debian-installer
Status: install ok installed
Version: cdrom-isolinux-2.6-20060517
Description: debian installation image
Package: apt-cdrom-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.10
Depends: cdrom-detect
Provides: apt-mirror-setup
Description: set up a CD in sources.list
Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.10
Depends: choose-mirror
Description: set up a mirror in sources.list
Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 88
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.10
Depends: apt-mirror-setup, base-installer (>= 1.49)
Description: Configure apt
Installer-Menu-Item: 70
Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 540
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.57
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.41), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19)
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65
Package: cdebconf-newt-entropy
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.3
Depends: cdebconf-newt-udeb, libc6 (>= 2.3.6-6), libnewt0.52
Description: cdebconf newt plugin for reading from /dev/random
cdebconf plugin to facilitate reading random data from /dev/random.
Asks the user to enter random characters on the keyboard and shows a
progressbar with percent-of-data read.
Package: choose-mirror
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 244
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.00
Depends: cdebconf-udeb, configured-network, choose-mirror-bin
Description: Choose mirror to install from (menu item)
Installer-Menu-Item: 23
Package: choose-mirror-bin
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.00
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.41)
Description: Choose mirror to install from (program)
Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.9
Depends: os-prober, tzsetup-udeb, mounted-partitions
Description: set up clock
Installer-Menu-Item: 62
Package: crc-modules-2.6.16-1-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.30
Depends: kernel-image-2.6.16-1-486-di
Provides: crc-modules
Description: CRC modules
This package contains CRC support modules.
Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 168
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3
Depends: libc6 (>= 2.3.5-1), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: dhcp-client-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 100
Maintainer: Eloy A. Paris <peloy@debian.org>
Version: 2.0pl5-19.4
Depends: libc6 (>= 2.3.5-1)
Description: DHCP Client for debian-installer
dhcp-client-udeb is a minimal dhcp package used by the debian-installer.
Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.29
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.41)
Description: mapdevfs utility for the debian installer
Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 60
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.35
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35
Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 352
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.38+1.39-WIP-2006.04.09-2
Depends: libblkid1-udeb, libc6 (>= 2.3.6-6)
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: ethdetect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 96
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.35
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: ethernet-card-detection
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 15
Package: ext3-modules-2.6.16-1-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 240
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.30
Depends: kernel-image-2.6.16-1-486-di
Provides: ext3-modules
Description: EXT3 filesystem support
This package contains the EXT3 filesystem module for the Linux kernel.
Package: fdisk-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 140
Maintainer: LaMont Jones <lamont@debian.org>
Version: 2.12r-10
Depends: libc6 (>= 2.3.6-6)
Description: Partition a hard drive (manual)
fdisk package
Package: gnupg-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 660
Maintainer: James Troup <james@nocrew.org>
Version: 1.4.3-1
Depends: libc6 (>= 2.3.5-1), libusb-0.1-udeb (>= 2:0.1.12), zlib1g-udeb (>= 1:1.2.1)
Description: GNU privacy guard - a free PGP replacement
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC2440.
.
This is GnuPG packaged in minimal form for use in debian-installer.
Package: grub-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 276
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>= 1.15), di-utils-mapdevfs, os-prober
Provides: bootable-system
Description: Install GRUB on a hard disk
Installer-Menu-Item: 73
Package: jfs-modules-2.6.16-1-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.30
Depends: kernel-image-2.6.16-1-486-di
Provides: jfs-modules
Description: JFS filesystem support
This package contains the JFS filesystem module for the Linux kernel.
Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 1024
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.8-1
Description: A stripped-down version of jfsutils, for debian-installer
This package is a jfsutils package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 40
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.38+1.39-WIP-2006.04.09-2
Depends: libc6 (>= 2.3.6-6)
Provides: libblkid1
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 1564
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6-7
Provides: libc6, libc-udeb, glibc-2.3.6-2, glibc-2.3.5-3
Description: GNU C Library: Shared libraries - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains a minimal set of libraries needed for the Debian
installer. Do not install it on a normal system.
Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 52
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.05-2
Depends: libc6 (>= 2.3.6-6)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
This is a udeb, or a microdeb, for the debian-installer.
.
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
Package: libiw28-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 24
Maintainer: Guus Sliepen <guus@debian.org>
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: libparted1.6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 320
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.6.25.1-3
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Provides: libparted1.6-13
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: libusb-0.1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Aurelien Jarno <aurel32@debian.org>
Version: 2:0.1.12-2
Depends: libc6 (>= 2.3.5-1)
Provides: libusb-0.1-4
Description: userspace USB programming library
Library for programming USB applications without the knowledge
of Linux kernel internals.
.
More information can be found at the Linux USB web site
http://www.linux-usb.org/ .
.
This is a minimal package for use in debian-installer.
Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 20
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.38+1.39-WIP-2006.04.09-2
Depends: libc6 (>= 2.3.6-6)
Provides: libuuid1
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's),
using a standard which is blessed by both Microsoft and DCE, and is
being proposed as an internet standard. See the internet-draft:
.
draft-leach-uuids-guids-01.txt
.
for more information.
.
This is a minimal package for debian-installer.
Package: lilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 172
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.15
Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15), di-utils-mapdevfs, fdisk-udeb, os-prober
Provides: bootable-system
Description: Install LILO on a hard disk
Installer-Menu-Item: 75
Package: loop-aes-2.6.16-1-486-di
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 148
Maintainer: Max Vozeler <xam@debian.org>
Version: 3.1d+3
Depends: kernel-image-2.6.16-1-486-di, mount-aes-udeb (>= 2.12p-1)
Provides: loop-aes-modules
Description: loop-AES encryption modules for kernel 2.6.16-1-486-di
This package contains the loop-AES loadable Linux kernel modules
compiled for kernel 2.6.16-1-486-di
.
loop-AES can be used to encrypt disk partitions, removable media,
swap space and other devices. It provides measures to strengthen
the encryption: Passphrase seeds, multiple hash iterations, MD5 IV
and use of alternating encryption keys.
.
Encryption keys can be stored in a GnuPG-encrypted keyfile, which
allows the passphrase to be changed without re-encryption. Keyfiles
can also be encrypted asymmetrically for multi-user access.
.
This package includes the cipher modules blowfish, twofish and
serpent in addition to the default cipher (AES).
.
If you compiled a custom kernel, you will most likely need to
compile a custom version of these modules as well. The package
loop-aes-source has been provided for this purpose.
Package: loop-modules-2.6.16-1-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.30
Depends: kernel-image-2.6.16-1-486-di
Provides: loop-modules
Description: Loopback filesystem support
This package contains loopback filesystem support for the Linux kernel.
Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 384
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.05-1
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02 (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
This is a udeb, or a microdeb, for the debian-installer.
.
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Package: lvmcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 428
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.09
Depends: cdebconf-udeb, md-modules, lvm2-udeb, parted-udeb, di-utils (>= 1.15)
Description: lvmcfg without the main menu item
Package: md-modules-2.6.16-1-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 340
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.30
Depends: kernel-image-2.6.16-1-486-di
Provides: md-modules
Description: RAID and LVM support
This package contains RAID and LVM modules for the Linux kernel.
Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 96
Maintainer: Debian/Ubuntu mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 1.12.0-1
Depends: libc6 (>= 2.3.5-1)
Description: tool to administer Linux md device arrays (software RAID)
mdadm is a program that can be used to create, manage, and monitor MD
devices.
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 312
Maintainer: Paul Fleischer <proguy@proguy.dk>
Version: 1.14
Depends: cdebconf-udeb, md-modules, mdadm-udeb, partconf-find-partitions
Description: Configure MD devices
Use this module to configure the MD devices.
Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 148
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-2
Depends: libc6 (>= 2.3.5-1), libuuid1
Description: User-level tools for ReiserFS filesystems
This installer module contains the utility to create ReiserFS filesystems.
.
Homepage: http://www.namesys.com/
Package: mount-aes-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 216
Maintainer: Max Vozeler <xam@debian.org>
Version: 2.12r-10
Depends: libblkid1-udeb (>= 1.37-1), libc6 (>= 2.3.6-6), libuuid1-udeb
Description: Mount utils for loop-AES
loop-AES patched mount, losetup and swapon
Package: netcfg
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 724
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.25
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.41), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Provides: configured-network
Description: Configure the network
To install additional installer components or the Debian Base System over
the network, you need to configure the network in the installer. This
component will first try to configure your network with DHCP and ask
you for static network configuration if this fails. The configured
network settings will be copied to your newly installed system.
Installer-Menu-Item: 18
Package: network-preseed
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 20
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.15
Depends: configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21
Package: nic-extra-modules-2.6.16-1-486-di
Status: instal
--- End Message ---