[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#353558: install report



Package: installation-reports

Boot method: CD net install
Image version: 100MB i386 net install from
http://www.debian.org/devel/debian-installer/ on Feb 18 2006

Install Date: Feb 19th 2006 7am

Machine: Desktop x86 custom built
Processor: Duron 1900
Memory: 512MB pc3200
Partitions:
Filesystem    Type   1K-blocks      Used Available Use% Mounted on
/dev/hda1     ext3      255912     79763    162496  33% /
/dev/hda9     ext3    69314456    131696  65661716   1% /home
/dev/hda8     ext3      369000      8250    341090   3% /tmp
/dev/hda5     ext3     4807056   1173328   3389544  26% /usr
/dev/hda6     ext3     2885780    530148   2209044  20% /var
tmpfs        tmpfs      258304         0    258304   0% /dev/shm
tmpfs        tmpfs      258304       104    258200   1% /dev

Output of lspci and lspci -n:

lspci

0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333 AGP]
0000:00:08.0 VGA compatible controller: 3Dfx Interactive, Inc. Voodoo 3 (rev 01)
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 80)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 80)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 80)
0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
0000:00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102
[Rhine-II] (rev 74)

lspci -n

0000:00:00.0 0600: 1106:3099
0000:00:01.0 0604: 1106:b099
0000:00:08.0 0300: 121a:0005 (rev 01)
0000:00:10.0 0c03: 1106:3038 (rev 80)
0000:00:10.1 0c03: 1106:3038 (rev 80)
0000:00:10.2 0c03: 1106:3038 (rev 80)
0000:00:10.3 0c03: 1106:3104 (rev 82)
0000:00:11.0 0601: 1106:3177
0000:00:11.1 0101: 1106:0571 (rev 06)
0000:00:11.5 0401: 1106:3059 (rev 50)
0000:00:12.0 0200: 1106:3065 (rev 74)


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:   [O]
Configure network HW:  [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:[O]
Create file systems: [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [ E ]
Reboot:                 [O]

Comments/Problems : I was installing on the master of the secondary
IDE channel. Grub and LILO both failed to install. Swapping to the
first IDE channel solved the issue.

Very smooth install.



Reply to: