Bug#352820: Installation Report Etch AMD64
Package: installation-reports
Version: Etch amd64, Daily Builds
Boot method: CD
Image version: debian-testing-amd64-netinst.iso
(http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/amd64/iso-cd/debian-testing-amd64-netinst.iso)
downloaded february 13th 2006
Date: february 14th 2006
Machine: NEC Powermate - F - ML7
Processor: Intel PIV with EM64T 3GHz
Memory: 1 Go
Partitions:
# df -Tl
Sys. de fich. Type 1K-blocs Occupé Disponible Capacité Monté sur
/dev/sda1 ext3 73987644 2068324 68160916 3% /
tmpfs tmpfs 508640 0 508640 0% /dev/shm
tmpfs tmpfs 10240 696 9544 7% /dev
Output of lspci and lspci -n:
# lspci
0000:00:00.0 Host bridge: Intel Corp. 915G/P/GV Processor to I/O
Controller (rev 04)
0000:00:02.0 VGA compatible controller: Intel Corp. 82915G Express
Chipset Family Graphics Controller (rev 04)
0000:00:1d.0 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #1 (rev 04)
0000:00:1d.1 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #2 (rev 04)
0000:00:1d.2 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #3 (rev 04)
0000:00:1d.3 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #4 (rev 04)
0000:00:1d.7 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB2 EHCI Controller (rev 04)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev d4)
0000:00:1e.2 Multimedia audio controller: Intel Corp.
82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 04)
0000:00:1f.0 ISA bridge: Intel Corp. 82801FB/FR (ICH6/ICH6R) LPC
Interface Bridge (rev 04)
0000:00:1f.2 IDE interface: Intel Corp. 82801FB/FW (ICH6/ICH6W) SATA
Controller (rev 04)
0000:00:1f.3 SMBus: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family)
SMBus Controller (rev 04)
0000:01:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8169 Gigabit Ethernet (rev 10)
# lspci -n
0000:00:00.0 0600: 8086:2580 (rev 04)
0000:00:02.0 0300: 8086:2582 (rev 04)
0000:00:1d.0 0c03: 8086:2658 (rev 04)
0000:00:1d.1 0c03: 8086:2659 (rev 04)
0000:00:1d.2 0c03: 8086:265a (rev 04)
0000:00:1d.3 0c03: 8086:265b (rev 04)
0000:00:1d.7 0c03: 8086:265c (rev 04)
0000:00:1e.0 0604: 8086:244e (rev d4)
0000:00:1e.2 0401: 8086:266e (rev 04)
0000:00:1f.0 0601: 8086:2640 (rev 04)
0000:00:1f.2 0101: 8086:2651 (rev 04)
0000:00:1f.3 0c05: 8086:266a (rev 04)
0000:01:0c.0 0200: 10ec:8169 (rev 10)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [E]
Load installer modules: [ ]
Detect hard drives: [ ]
Partition hard drives: [ ]
Create file systems: [ ]
Mount partitions: [ ]
Install base system: [ ]
Install boot loader: [ ]
Reboot: [ ]
Comments/Problems:
Like describe in errata (*SATA driver can block access to CD drive in
installations from CD*)
http://www.debian.org/releases/stable/debian-installer/, I tryed to
select only ide-generic, ide-cd and isofs.
With Sarge, i have to do this but there is a "generic" and an
"ide-generic", the CD is detected with "generic".
With Etch, there is only "ide-generic", the CD is not detected.
Reply to: