Bug#318154: Installation report
Package: installation-reports
Debian-installer-version: 2005-07-13
http://ftp.debian.org/debian/dists/sarge/main/installer-sparc/current/images/sparc32/netboot/2.6/boot.img
uname -a: Linux sloneczko 2.6.8-2-sparc32 #1 Wed Mar 23 02:20:49 EST
2005 sparc GNU/Linux
Date: 2005-07-13 21:21 GMT+0200
Method: network install, booted from TFTP with RARP, packages downloaded
from ftp.pl.debian.org, no proxy
Machine: Sun Netra i
Processor: Fujitsu MB86904 (full /proc/cpuinfo below)
Memory: 64MB
Root Device: SCSI, Seagate ST32430W SUN2.1G
Root Size/partition table: 1.8GB (full partition table below)
Output of lspci and lspci -n: no PCI, just SBus
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
When I selected polish language in installer, the instalation hanged on
the first screen with polish character. I wouldn't consider this as a
bug, because I'm using UTF-8 incapable version of minicom 2.1, so it's
probably minicom's bug. My primary Linux distribution is PLD, so it's
not your problem either. Everything went fine when I selected english
installer.
By the way, hotplug tries to load PCI subsystem even though my hardware
doesn't have one. I don't know if it's the issue with installer or
hotplug package, because it's my first Debian install.
If you need or want some more information, feel free to contact me.
sloneczko:~# uname -a
Linux sloneczko 2.6.8-2-sparc32 #1 Wed Mar 23 02:20:49 EST 2005 sparc
GNU/Linux
sloneczko:~# cat /proc/cpuinfo
cpu : Fujitsu MB86904
fpu : Lsi Logic/Meiko L64804 or compatible
promlib : Version 3 Revision 2
prom : 2.15
type : sun4m
ncpus probed : 1
ncpus active : 1
CPU0Bogo : 109.77
CPU0ClkTck : 0
MMU type : Fujitsu Swift
contexts : 256
nocache total : 2252800
nocache used : 215296
sloneczko:~# fdisk -l /dev/sda
Disk /dev/sda (Sun disk label): 67 heads, 62 sectors, 1010 cylinders
Units = cylinders of 4154 * 512 bytes
Device Flag Start End Blocks Id System
/dev/sda1 0 47 97619 1 Boot
/dev/sda2 47 951 1877608 83 Linux native
/dev/sda3 0 1010 2097770 5 Whole disk
/dev/sda4 951 1010 122543 82 Linux swap
sloneczko:~# dmesg
PROMLIB: Sun Boot Prom Version 3 Revision 2
Linux version 2.6.8-2-sparc32 (dilinger@june.internal) (gcc version
3.3.5 (Debian 1:3.3.5-12)) #1 Wed Mar 23 02:20:49 EST 2005
ARCH: SUN4M
TYPE: SPARCstation 5
Ethernet address: 8:0:20:7a:51:98
Boot time fixup v1.6. 4/Mar/98 Jakub Jelinek (jj@ultra.linux.cz).
Patching kernel for srmmu[Fujitsu Swift]/iommu
On node 0 totalpages: 15119
DMA zone: 15119 pages, LIFO batch:3
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
Power off control detected.
Built 1 zonelists
Kernel command line: root=/dev/sda2 ro
PID hash table entries: 256 (order 8: 2048 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 57624k/65224k available (1548k kernel code, 7532k reserved, 384k
data, 124k init, 0k highmem)
Calibrating delay loop... 109.77 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
checking if image is initramfs...it isn't (ungzip failed); looks like an
initrd
Freeing initrd memory: 2500k freed
NET: Registered protocol family 16
IOMMU: impl 0 vers 4 table 0xf1380000[262144 B] map [65536 b]
sbus0: Clock 22.0 MHz
dma0: Revision 2
dma1: Revision 2
ioremap: done with statics, switching to malloc
apc: power management initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
Console: switching to mono PROM 80x34
SunZilog: 2 chips.
zs2 at 0xfd015004 (irq = 44) is a SunZilog
zs3 at 0xfd015000 (irq = 44) is a SunZilog
ttyS0 at MMIO 0x0 (irq = 44) is a SunZilog
ttyS1 at MMIO 0x0 (irq = 44) is a SunZilog
Console: ttyS0 (SunZilog zs0)
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET: Registered protocol family 1
NET: Registered protocol family 17
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 2500 blocks [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 124k freed
scsi_mod: no version for "udiv" found: kernel tainted.
SCSI subsystem initialized
esp0: IRQ 36 SCSI ID 7 Clk 40MHz CCYC=25000 CCF=8 TOut 167
NCR53C9XF(espfast)
ESP: Total of 1 ESP hosts found, 1 actually in use.
scsi0 : Sparc ESP100A-FAST
Vendor: SEAGATE Model: ST32430W SUN2.1G Rev: 0666
Type: Direct-Access ANSI SCSI revision: 02
Vendor: TOSHIBA Model: XM-4101TASUNSLCD Rev: 1755
Type: CD-ROM ANSI SCSI revision: 02
sunlance.c:v2.02 24/Aug/03 Miguel de Icaza (miguel@nuclecu.unam.mx)
SunLance: using auto-carrier-detection.
eth0: LANCE 08:00:20:7a:51:98
esp0: target 1 [period 100ns offset 15 10.00MHz FAST SCSI-II]
SCSI device sda: 4197405 512-byte hdwr sectors (2149 MB)
SCSI device sda: drive cache: write through
/dev/scsi/host0/bus0/target1/lun0: p1 p2 p3 p4
Attached scsi disk sda at scsi0, channel 0, id 1, lun 0
esp0: target 6 asynchronous
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.20
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 6, lun 0
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding 122532k swap on /dev/sda4. Priority:-1 extents:1
EXT3 FS on sda2, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Attached scsi generic sg0 at scsi0, channel 0, id 1, lun 0, type 0
Attached scsi generic sg1 at scsi0, channel 0, id 6, lun 0, type 5
eth0: Carrier Lost, trying TPE
cdrom: open failed.
NET: Registered protocol family 10
Disabled Privacy Extensions on device f01bbfb0(lo)
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
Reply to: