[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#336173: Package: installation-reports

Package: installation-reports

Debian-installer-version: 28/10/2005
uname -a: #1 Wed sept 28 02:05:15 2005 x86_64
Date: 11:00m BST 28/10/2005
Method: Network install from CDROM 

Machine: ASUS A8N-SLI Delux
Processor: AMD64 S939 3800+
Memory: 4gigs
Root Device: SATA
Root Size/partition table: 

2 200GB disks with parts:


the 190GB parts are combined as raid1 with ext3 mounted as /
the 2 10GB parts are configured as ext3 and mounted as /local &
The 2 3.9GB parts are used as swap.

Output of lspci and lspci -n:

Don't have access to lspci in busybox

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [E]
Install boot loader:    [ ]
Reboot:                 [ ]


When tying to install the base_files package it says (in virt con 3)
"chroot: cannot execute mount: No such file or directory".

If I do a df, it shows /dev/md/0 mounted as /target and
/dev/cdroms/cdrom0 mounted as /cdrom.

I also had this exact same problem which an image I downloaded on

Hope this helps.


Reply to: