Bug#335932: Package: installation-reports
Package: installation-reports
Debian-installer-version:
http://amd64.debian.net/debian-installer/2005-10-26/netboot/mini.iso
uname -a: Linux mobil 2.6.12-1-amd64-generic #1 Wed Sep 28 02:05:15 CEST 2005
x86_64 unknown
Date: 26:10:2005 21:00 CEST
Method: Network installation based on mini.iso CD-Image
Machine: HP NX6125
Processor: AMD Turion ML-34 1.8GHz
Memory: 1GB
Root Device: IDE /dev/hda
Root Size/partition table:
1. fdisk:
Disk /dev/hda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 3824 30716248+ 7 HPFS/NTFS
Partition 1 does not end on cylinder boundary.
/dev/hda2 3825 3840 128520 83 Linux
/dev/hda3 3841 4083 1951897+ 82 Linux swap /
Solaris
/dev/hda4 4084 9729 45351495 83 Linux
2. fstab:
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/hda4 / ext3 defaults,errors=remount-ro 0 1
/dev/hda2 /boot ext3 defaults 0 2
/dev/hda3 none swap sw 0 0
/dev/hdc /media/cdrom0 iso9660 ro,user,noauto 0 0
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: ATI Technologies Inc: Unknown device 5950 (rev 01)
0000:00:01.0 PCI bridge: ATI Technologies Inc: Unknown device 5a3f
0000:00:04.0 PCI bridge: ATI Technologies Inc: Unknown device 5a36
0000:00:05.0 PCI bridge: ATI Technologies Inc: Unknown device 5a37
0000:00:13.0 USB Controller: ATI Technologies Inc: Unknown device 4374
0000:00:13.1 USB Controller: ATI Technologies Inc: Unknown device 4375
0000:00:13.2 USB Controller: ATI Technologies Inc: Unknown device 4373
0000:00:14.0 SMBus: ATI Technologies Inc: Unknown device 4372 (rev 11)
0000:00:14.1 IDE interface: ATI Technologies Inc: Unknown device 4376
0000:00:14.3 ISA bridge: ATI Technologies Inc: Unknown device 4377
0000:00:14.4 PCI bridge: ATI Technologies Inc: Unknown device 4371
0000:00:14.5 Multimedia audio controller: ATI Technologies Inc: Unknown device
4370 (rev 02)
0000:00:14.6 Modem: ATI Technologies Inc: Unknown device 4378 (rev 02)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:01:05.0 VGA compatible controller: ATI Technologies Inc: Unknown device
5955
0000:02:01.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788
Gigabit Ethernet (rev 03)
0000:02:02.0 Network controller: Broadcom Corporation: Unknown device 4318
(rev 02)
0000:02:04.0 CardBus bridge: Texas Instruments: Unknown device 8031
0000:02:04.2 FireWire (IEEE 1394): Texas Instruments: Unknown device 8032
0000:02:04.3 Unknown mass storage controller: Texas Instruments: Unknown
device 8033
0000:02:04.4 0805: Texas Instruments: Unknown device 8034
0000:00:00.0 0600: 1002:5950 (rev 01)
0000:00:01.0 0604: 1002:5a3f
0000:00:04.0 0604: 1002:5a36
0000:00:05.0 0604: 1002:5a37
0000:00:13.0 0c03: 1002:4374
0000:00:13.1 0c03: 1002:4375
0000:00:13.2 0c03: 1002:4373
0000:00:14.0 0c05: 1002:4372 (rev 11)
0000:00:14.1 0101: 1002:4376
0000:00:14.3 0601: 1002:4377
0000:00:14.4 0604: 1002:4371
0000:00:14.5 0401: 1002:4370 (rev 02)
0000:00:14.6 0703: 1002:4378 (rev 02)
0000:00:18.0 0600: 1022:1100
0000:00:18.1 0600: 1022:1101
0000:00:18.2 0600: 1022:1102
0000:00:18.3 0600: 1022:1103
0000:01:05.0 0300: 1002:5955
0000:02:01.0 0200: 14e4:169c (rev 03)
0000:02:02.0 0280: 14e4:4318 (rev 02)
0000:02:04.0 0607: 104c:8031
0000:02:04.2 0c00: 104c:8032
0000:02:04.3 0180: 104c:8033
0000:02:04.4 0805: 104c:8034
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O ]
Configure network HW: [O ]
Config network: [ O]
Detect CD: [ -] -> Select Mirror: [O]
Load installer modules: [ O]
Detect hard drives: [ O]
Partition hard drives: [ O]
Create file systems: [ O]
Mount partitions: [ O]
Install base system: [E ]
Install boot loader: [ ]
Reboot: [ ]
Comments/Problems:
Break of base system installation after approximately 65%. Last message on
console 3 and /var/log/messages: Setting up base-config (2.73)... . No
further messages or information.
fdisk, fstab, lspci and lspci -n information based on successfull installation
of Lennart Sorensens sarge-amd64-2.6.12-netinst on the same machine.
Reply to: