Bug#335838: installation-reports
Package: installation-reports
Debian-installer-version: Tue, Oct 25 2005, Debian testing network
installation CD from
http://cdimage.debian.org/pub/cdimage-testing/daily/i386/current/debian-testing-i386-netinst.iso
uname -a: Linux (none) 2.6.12-1-386 #1 Tue Sep 27 12:41:08 JST 2005
i686 unknown
Date: Wed Oct 26 about 8:00 GMT
Method: To start I've used a bootable CD. Network installation from Cracow,
Poland, from student hostel with 10Mbit Internet connection with no
proxy.
Machine: IBM PC 300PL
Processor: Pentium II 400 MHz
Memory: 192 MB SDRAM in 2 banks, 1st is Siemens 128MB unbuffered
without ECC and 64bit width, 2nd - Toshiba 64MB unbuffered with ECC,
72bit width.
Root Device: IDE Hitachi Deskstar HDS728080PLAT20
Root Size/partition table:
1 main 16.4MB ext2 /boot
2 main 10GB B ntfs
3 main 6.5GB reiserfs /
5 log 501.7MB swap
6 log 5GB ext3 /home
7 log 20GB fat32
8 log 40GB ntfs
Output of lspci and lspci -n:
Actully I've used Everest Home Edition, but it's quite same as lspci:
PCI Devices:
Bus 0, Device 18, Function 1 AVerMedia TV Series Device - Bt878 Audio Section
Bus 0, Device 18, Function 0 AVerMedia TV Series Device - Bt878 Video Section
Bus 0, Device 2, Function 1 Intel 82371AB/EB PIIX4 - IDE Controller
Bus 0, Device 2, Function 2 Intel 82371AB/EB PIIX4 - USB Host Controller
Bus 0, Device 2, Function 0 Intel 82371EB PCI ISA IDE Xcelerator 4 - PIIX4E [A-0]
Bus 0, Device 2, Function 3 Intel 82371EB PIIX4E - Power Management Controller [A-0]
Bus 0, Device 1, Function 0 Intel 82443BX/ZX AGP Controller [B-1]
Bus 0, Device 0, Function 0 Intel 82443BX/ZX Host Bridge/Controller [B-1]
Bus 0, Device 3, Function 0 Intel 82558 EtherExpress PRO/100B Adapter [A/B-0]
Bus 0, Device 16, Function 0 Matrox Millennium II Video Adapter
Bus 1, Device 1, Function 0 S3 Trio3D (86c365/86c366) Video Adapter
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [E]
Install boot loader: [ ]
Reboot: [ ]
Comments/Problems:
Sometimes I'm able to select one of four kernel's versions, sometimes
I can't. The same situation with a locales.
----------------------------------------------------------------------
INTERIA.PL | Kliknij po wiecej >>> http://link.interia.pl/f18c1
Reply to: