Bug#334144: installation report for hppa / Etch on C200
Package: installation-reports
Debian-installer-version: 10-13-2005 (http://cdimage.debian.org/pub/cdimage-testing/daily/hppa/current/debian-testing-hppa-netinst.iso)
uname -a: Linux vega 2.6.12-1-parisc-smp #1 SMP Tue Sep 27 11:09:02 UTC 2005 parisc GNU/Linux
Date: 10-13-2005
Method: Network install CD.
deb http://mirrors.kernel.org/debian/ testing main
No proxy.
Machine: C200
Processor: PA8200 (PCX-U+)
Memory: 1.5GB
Root Device: SCSI /dev/sdb5
Root Size/partition table:
Device Boot Start End Blocks Id System
/dev/sdb1 1 4 32098+ f0 Linux/PA-RISC boot
/dev/sdb2 5 20 128520 83 Linux
/dev/sdb3 21 522 4032315 5 Extended
/dev/sdb5 * 21 499 3847536 83 Linux
/dev/sdb6 500 522 184716 82 Linux swap / Solaris
/dev/sdb2 == /boot
/dev/sdb5 == /
Output of lspci and lspci -n:
# lspci
0000:00:13.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 04)
0000:00:14.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 30)
0000:01:02.0 Fibre Channel: Hewlett-Packard Company Tach TL Fibre Channel Host Adapter (rev 0b)
0000:01:04.0 Display controller: Hewlett-Packard Company Visualize FX4 (rev 02)
# lspci -n
0000:00:13.0 0100: 1000:000f (rev 04)
0000:00:14.0 0200: 1011:0019 (rev 30)
0000:01:02.0 0c04: 103c:1028 (rev 0b)
0000:01:04.0 0380: 103c:1008 (rev 02)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
None. The installer worked flawless on my C200.
Thanks,
- Ryan
________________________________________________________________________
Reply to: