Bug#334118: HPPA B180L 2005-10-15 netboot install successful

[Richard Hirst <rhirst@levanta.com>]

Package: installation-reports

Debian-installer-version: http://people.debian.org/~jbailey/d-i/hppa/2005-10-15/netboot/2.6/boot.img
uname -a: Linux merlin 2.6.12-1-parisc #1 Tue Sep 27 10:16:14 UTC 2005 parisc unknown
Date: Sat Oct 15 18:02:19 BST 2005
Method: Netboot, used local debian mirror, no proxy, chose
"desktop machine" paritioning, dhcp netowrk configuration,

Machine: HPPA parisc B180L, graphical console, single 4G internal
disk, has zalon card but no disks attached to it.
Processor: PA7300LC (PCX-L2), 180MHz
Memory: 256MB
Root Device: /dev/sda5
Root Size/partition table:

merlin:/home/richard# fdisk -l

Disk /dev/sda: 4294 MB, 4294816768 bytes
255 heads, 63 sectors/track, 522 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1           4       32098+  f0  Linux/PA-RISC boot
/dev/sda2               5          20      128520   83  Linux
/dev/sda3              21         522     4032315    5  Extended
/dev/sda5   *          21         176     1253038+  83  Linux
/dev/sda6             177         194      144553+  82  Linux swap / Solaris
/dev/sda7             195         522     2634628+  83  Linux
merlin:/home/richard# 

merlin:/home/richard# df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/sda5             1.2G  429M  658M  40% /
/dev/sda2             118M  6.6M  105M   6% /boot
/dev/sda7             2.5G   65M  2.3G   3% /home
tmpfs                 125M     0  125M   0% /dev/shm
merlin:/home/richard# 

Output of lspci and lspci -n:

merlin:/home/richard# lspci
0000:00:13.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 04)
0000:00:14.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 30)
merlin:/home/richard# lspci -n
0000:00:13.0 0100: 1000:000f (rev 04)
0000:00:14.0 0200: 1011:0019 (rev 30)
merlin:/home/richard# 

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [O]

Comments/Problems:

Perfect!  CDROM was detected, but I didn't install from it (netboot).