Bug#326062: installation report
Package: installation-reports
Debian-installer-version: <Fill in date and from where you got the image>
uname -a: <The result of running uname -a on a shell prompt>
Date: <Date and time of the install>
Method: <How did you install? What did you boot off? If network
install, from where? Proxied?>
Machine: <An AMD64 Nforce3 based machine>
Processor:AMD64
Memory:1Gb
Root Device: <Sata WD disk>
Root Size/partition table: <
Device Boot Start End Blocks Id System
/dev/sda1 1 4 32098+ 83 Linux
/dev/sda2 5 7177 57617122+ 5 Extended
/dev/sda5 5 1220 9767488+ 83 Linux
/dev/sda6 1221 1463 1951866 82 Linux swap / Solaris
/dev/sda7 1464 6934 43945776 83 Linux
/dev/sda8 6935 7177 1951866 83 Linux>
Output of lspci and lspci -n:
lspci
0000:00:00.0 Host bridge: nVidia Corporation: Unknown device 00e1 (rev a1)
0000:00:01.0 ISA bridge: nVidia Corporation: Unknown device 00e0 (rev a2)
0000:00:01.1 SMBus: nVidia Corporation: Unknown device 00e4 (rev a1)
0000:00:02.0 USB Controller: nVidia Corporation: Unknown device 00e7 (rev a1)
0000:00:02.1 USB Controller: nVidia Corporation: Unknown device 00e7 (rev a1)
0000:00:02.2 USB Controller: nVidia Corporation: Unknown device 00e8 (rev a2)
0000:00:05.0 Bridge: nVidia Corporation: Unknown device 00df (rev a2)
0000:00:06.0 Multimedia audio controller: nVidia Corporation: Unknown device 00ea (rev a1)
0000:00:08.0 IDE interface: nVidia Corporation: Unknown device 00e5 (rev a2)
0000:00:0a.0 IDE interface: nVidia Corporation: Unknown device 00e3 (rev a2)
0000:00:0b.0 PCI bridge: nVidia Corporation: Unknown device 00e2 (rev a2)
0000:00:0e.0 PCI bridge: nVidia Corporation: Unknown device 00ed (rev a2)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 4153
0000:01:00.1 Display controller: ATI Technologies Inc: Unknown device 4173
0000:02:08.0 USB Controller: NEC Corporation USB (rev 41)
0000:02:08.1 USB Controller: NEC Corporation USB (rev 41)
0000:02:08.2 USB Controller: NEC Corporation USB
2.0 (rev 01)
0000:02:09.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U (rev 01)
0000:02:0b.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80)
0000:02:0c.0 Unknown mass storage controller: Silicon Image, Inc. (formerly CMD Technology Inc) SiI 3114 [SATALink/SATARaid] Serial ATA Controller (rev 02)
lspci -n
0000:00:00.0 0600: 10de:00e1 (rev a1)
0000:00:01.0 0601: 10de:00e0 (rev a2)
0000:00:01.1 0c05: 10de:00e4 (rev a1)
0000:00:02.0 0c03: 10de:00e7 (rev a1)
0000:00:02.1 0c03: 10de:00e7 (rev a1)
0000:00:02.2 0c03: 10de:00e8 (rev a2)
0000:00:05.0 0680: 10de:00df (rev a2)
0000:00:06.0 0401: 10de:00ea (rev a1)
0000:00:08.0 0101: 10de:00e5 (rev a2)
0000:00:0a.0 0101: 10de:00e3 (rev a2)
0000:00:0b.0
0604: 10de:00e2 (rev a2)
0000:00:0e.0 0604: 10de:00ed (rev a2)
0000:00:18.0 0600: 1022:1100
0000:00:18.1 0600: 1022:1101
0000:00:18.2 0600: 1022:1102
0000:00:18.3 0600: 1022:1103
0000:01:00.0 0300: 1002:4153
0000:01:00.1 0380: 1002:4173
0000:02:08.0 0c03: 1033:0035 (rev 41)
0000:02:08.1 0c03: 1033:0035 (rev 41)
0000:02:08.2 0c03: 1033:00e0 (rev 01)
0000:02:09.0 0100: 9004:8178 (rev 01)
0000:02:0b.0 0c00: 1106:3044 (rev 80)
0000:02:0c.0 0180: 1095:3114 (rev 02)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [E]
Config network: [ ]
Detect CD: [ ]
Load installer modules: [ ]
Detect hard drives: [ ]
Partition hard drives: [ ]
Create file systems: [ ]
Mount partitions: [ ]
Install base system: [ ]
Install boot loader: [ ]
Reboot: [ ]
Comments/Problems:Sarge won't find my onboard Ethernet adapter. I choose the forcedeth module which is
appropriate for the nvidia/marvell adapter, but the installer says there is no HW for that.
It's strange, because on other distros I tried, the forcedeth module was used.
<Description of the install, in prose, and any thoughts, comments
I would boot with another kernel, but don't know how to do that (if it's possible at all).It seems that some parameters are needed for the forcedeth module, but I don't
know what they are, and what values they can have.>
Reply to: