Bug#325831: Fwd: Package: installation-reports
Package: installation-reports
Debian-installer-version: 08-25-2005 from www.debian.org
uname -a: 2.6.12-1
during install, 2.6.12-1 after install
Date: 08-29-2005
Method: netinstall linux26
Machine: dell dimension 5100
Processor: PIV 3GHz HT
Memory: 1Gb
Root Device: SATA /dev/sda
Root Size/partition table:
/dev/sda2 19228308 2013444 16238112 12% /
/dev/sda6 32772264 11476716 19630816 37% /home
/dev/hda 115770 115770 0 100% /media/cdrom0
Output of lspci and lspci -n:
0000:00:00.0 0600: 8086:2770 (rev 02)
0000:00:01.0 0604: 8086:2771 (rev 02)
0000:00:1b.0 0403: 8086:27d8 (rev 01)
0000:00:1c.0 0604: 8086:27d0 (rev 01)
0000:00:1d.0 0c03: 8086:27c8 (rev 01)
0000:00:
1d.1 0c03: 8086:27c9 (rev 01)
0000:00:1d.2 0c03: 8086:27ca (rev 01)
0000:00:1d.3 0c03: 8086:27cb (rev 01)
0000:00:1d.7
0c03: 8086:27cc (rev 01)
0000:00:1e.0 0604: 8086:244e (rev e1)
0000:00:1f.0 0601: 8086:27b8 (rev 01)
0000:00:1f.1 0101: 8086:27df (rev 01)
0000:00:1f.2 0101: 8086:27c0 (rev 01)
0000:00:1f.3 0c05: 8086:27da (rev 01)
0000:01:00.0 0300: 1002:5b60
0000:01:00.1 0380: 1002:5b70
0000:03:02.0 0200: 10ec:8139 (rev 10)
0000:03:03.0 0401: 1102:0002 (rev 07)
0000:03:03.1 0980: 1102:7002 (rev 07)
0000:03:08.0 0200: 8086:27dc (rev 01)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [E] specify ata_piix manually
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [E] /dev/sde instead of /dev/sda in GRUB menu.lst
Comments/Problems:
My previous installation failed since kernel 2.6.8 which do not support my SATA
controller was installed (my hard drive wasn't detected using a Sarge netinst).
So I took a 2.6.11 kernel-image package and install it using dpkg just after
installing the base system. Everyting seems to be Ok but I noticed something
strange during Grub install, my hard drive is /dev/sda and I got /dev/sde in my
menu.lst. I had to change that value for /dev/sda to make it work.
After first reboot and debian setup. I upgraded the system to sid and install a new
2.6.12 kernel-image which updated menu.lst with always /dev/sde instead of /dev/sda.
Now everything works fine thanks for your help.
---------- Forwarded message ----------
From: Jeremy Kuhn <jeremy.kuhn1@gmail.com>
Date: Aug 27, 2005 7:41 PM
Subject: Package: installation-reports
To: submit@bugs.debian.org
Package: installation-reports
Debian-installer-version: 08-25-2005 from
www.debian.org
uname -a: 2.6.12-1 during install, system unbootable after
Date: 08-26-2005
Method: netinstall linux26
Machine: dell dimension 5100
Processor: PIV 3GHz HT
Memory: 1Gb
Root Device: SATA /dev/sda
Root Size/partition table:
/dev/sda2 19228308 2013444 16238112 12% /
/dev/sda6 32772264 11476716 19630816 37% /home
/dev/hda 115770 115770 0 100% /media/cdrom0
Output of lspci and lspci -n:
0000:00:00.0 0600: 8086:2770 (rev 02)
0000:00:01.0 0604: 8086:2771 (rev 02)
0000:00:1b.0 0403: 8086:27d8 (rev 01)
0000:00:1c.0 0604: 8086:27d0 (rev 01)
0000:00:1d.0
0c03: 8086:27c8 (rev 01)
0000:00:1d.1 0c03: 8086:27c9 (rev 01)
0000:00:1d.2 0c03: 8086:27ca (rev 01)
0000:00:1d.3 0c03: 8086:27cb (rev 01)
0000:00:1d.7
0c03: 8086:27cc (rev 01)
0000:00:1e.0 0604: 8086:244e (rev e1)
0000:00:1f.0 0601: 8086:27b8 (rev 01)
0000:00:1f.1 0101: 8086:27df (rev 01)
0000:00:1f.2 0101: 8086:27c0 (rev 01)
0000:00:1f.3 0c05: 8086:27da (rev 01)
0000:01:00.0 0300: 1002:5b60
0000:01:00.1 0380: 1002:5b70
0000:03:02.0 0200: 10ec:8139 (rev 10)
0000:03:03.0 0401: 1102:0002 (rev 07)
0000:03:03.1 0980: 1102:7002 (rev 07)
0000:03:08.0 0200: 8086:27dc (rev 01)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [E] specify ata_piix manualy
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [E] kernel panic cannot find /dev/console
Comments/Problems: kernel 2.6.12-1 was used for install but 2.6.8 was installed after reboot I got kernel panic
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
My first idea was to install kernel 2.6.12 instead of 2.6.8 before reboot, but howto?
Reply to: