Bug#325780: Package: installation-reports
Package: installation-reports
Debian-installer-version:
/daily/i386/20050828/debian-testing-i386-netinst.iso 2005/08/29
uname -a: Linux dev-case-morphix 2.6.8-2-386 #1 Thu May 19 17:40:50
JST 2005 i686 GNU/Linux
Date: 2005/08/29 - 1800 GMT approx.
Method: Netinst.iso then ftp.uk.debian.org
Machine: Mini-itx Motherboard
Processor: VIA Samuel 2 - CentaurHauls
Memory: 512Mb
Root Device: IDE hdc
Root Size/partition table: outout of /proc/partitons:-
major minor #blocks name
22 0 9820440 hdc
22 1 2755116 hdc1
22 2 1 hdc2
22 5 345366 hdc5
22 6 6715138 hdc6
/dev/hdc1 / ext3 rw,errors=remount-ro 0 0
proc /proc proc rw 0 0
sysfs /sys sysfs rw 0 0
devpts /dev/pts devpts rw,gid=5,mode=620 0 0
tmpfs /dev/shm tmpfs rw 0 0
/dev/hdc6 /home ext3 rw 0 0
usbfs /proc/bus/usb usbfs rw 0 0
tmpfs /dev tmpfs rw,size=10M,mode=0755 0 0
Output of lspci
Linux dev-case-morphix 2.6.8-2-386 #1 Thu May 19 17:40:50 JST 2005
i686 GNU/Linux
dev-case-morphix:/home/bms# lspci
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8623 [Apollo CLE266]
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP]
0000:00:0d.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394
Host Controller (rev 80)
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 80)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 80)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 80)
0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
0000:00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102
[Rhine-II] (rev 74)
0000:01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8623
[Apollo CLE266] integrated CastleRock graphics (rev 03)
and lspci -n:
dev-case-morphix:/home/bms# lspci -n
0000:00:00.0 0600: 1106:3123
0000:00:01.0 0604: 1106:b091
0000:00:0d.0 0c00: 1106:3044 (rev 80)
0000:00:10.0 0c03: 1106:3038 (rev 80)
0000:00:10.1 0c03: 1106:3038 (rev 80)
0000:00:10.2 0c03: 1106:3038 (rev 80)
0000:00:10.3 0c03: 1106:3104 (rev 82)
0000:00:11.0 0601: 1106:3177
0000:00:11.1 0101: 1106:0571 (rev 06)
0000:00:11.5 0401: 1106:3059 (rev 50)
0000:00:12.0 0200: 1106:3065 (rev 74)
0000:01:00.0 0300: 1106:3122 (rev 03)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [E]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [0]
Install base system: [0]
Install boot loader: [0]
Reboot: [O]
Comments/Problems:
After boot up base system I had to exit to shell and run the command
dhclient eth0
eth0 is the on-board ethernet. Connected to LAN with dhcp running,
with gateway to interweb.
Then resume installation at apt-configuration point.
Apart from that very nice install. I still hae to run dhclient after boot-up.
Thanks,
Brendan M. Sleight -
p.s. real email me.spam@barwap._example_.com - remove example. to give
at barwap.com
Reply to: