Bug#325572: install report

[Juha-Pekka Järvenpää <juha-pekka.jarvenpaa@mrgoodliving.com>]

Frans Pop wrote:
> On Monday 29 August 2005 14:52, Juha-Pekka Järvenpää wrote:
>
> > 0000:03:04.0 RAID bus controller: Promise Technology, Inc. PDC20319
> > (FastTrak S150 TX4) (rev 02)
> > 0000:03:04.0 0104: 105a:3319 (rev 02)
>
>
> > Detect hard drives:     [E] didn't detect RAID controller
>
>
> I assume you mean the FastTrak. Do you mean by "didn't detect" that the 
> module for it was not loaded automatically and that you had to modprobe 
> it manually?
>
> If so, this should be fixed in daily builds of installer for Etch as the 
> PCI id for the controller is now in the discover1 database:
>    105a3319        ide     sata_promise    PDC20319 (FastTrak S150 TX4)
>
> Is sata_promise the correct module for the controller?

I did not use any module for the controller since I disabled the 
hardware RAID controller by creating a RAID0 array for each of the two 
hard disks and then created a virtual RAID partition and set up a 
software RAID.

So I did not get the controller to work under Debian.


--
Juha-Pekka Järvenpää, Intranet programmer
Mobile  +358 (0)40 559 2707
Fax     +358 (0)9 751 75599
Email   juha-pekka.jarvenpaa@mrgoodliving.com

Mr.Goodliving Ltd.
A Subsidiary of RealNetworks, Inc.
Kanavaranta 7C, 00160 Helsinki, Finland
www.mrgoodliving.com
www.metalsmash.com
www.playmansports.com