Bug#322153: Debian-installation reports
Package: installation-reports
Debian-installer-version: Debian GNU/Linux 3.1 r0a "Sarge" - Official
386 Binary-1, 2005-08-04,
http://cdimage.debian.org/debian-cd/3.1_r0a/i386/iso-cd/
uname -a: Linux gucek 2.6.8-2-386 #1 Thu May 19 17:40:50 JST 2005 i686
GNU/Linux
Date: 2005-08-09
Method: netinst with option "linux26"
Machine: home-made komputer, based on Asus P2B (440BX) motherboard
Processor: i686 Celeron (III) 950 MHz
Memory: 384 MB
Root Device: connected to CSA-649U Ultra IDE Controller BIOS Version 1.9.10
Root Size/partition table (I didn't know which command to use, so I used
"df"):
System plików bl. 1K B użyte dostępne %uż.
zamont. na
/dev/hdh3 4806936 1874344 2688404 42% /
tmpfs 193500 0 193500
0% /dev/shm
/dev/hdh1 2047904 435328 1612576 22%
/mnt/hdh1
/dev/hdh4 933393 9056 874536
2% /home
/dev/hde1 7496 6397 699
91% /boot
/dev/hde2 7169488 5257200 1912288 74%
/mnt/hde2
/dev/hde3 8217244 3967444 4249800 49%
/mnt/hde3
/dev/hde5 13898664 10282616 3616048 74% /mnt/hde5
/dev/hde6 29288192 19696992 9591200 68% /mnt/hde6
tmpfs 10240 780 9460
8% /dev
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host
bridge (rev 02)
0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP
bridge (rev 02)
0000:00:04.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:04.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:04.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:04.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
0000:00:09.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI]
0000:00:0a.0 RAID bus controller: Silicon Image, Inc. (formerly CMD
Technology Inc) PCI0649 (rev 02)
0000:00:0b.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M
[Tornado] (rev 6c)
0000:00:0c.0 Multimedia video controller: Conexant Winfast TV2000 XP
(rev 03)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV18
[GeForce4 MX 4000 AGP 8x] (rev c1)
0000:00:00.0 0600: 8086:7190 (rev 02)
0000:00:01.0 0604: 8086:7191 (rev 02)
0000:00:04.0 0601: 8086:7110 (rev 02)
0000:00:04.1 0101: 8086:7111 (rev 01)
0000:00:04.2 0c03: 8086:7112 (rev 01)
0000:00:04.3 0680: 8086:7113 (rev 02)
0000:00:09.0 0401: 1274:5000
0000:00:0a.0 0104: 1095:0649 (rev 02)
0000:00:0b.0 0200: 10b7:9200 (rev 6c)
0000:00:0c.0 0400: 14f1:8800 (rev 03)
0000:01:00.0 0300: 10de:0185 (rev c1)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
This time everything was fine, thanks to help of Lennart Sorensen
<lsorense@csclub.uwaterloo.ca> who suggested to try installation option
"linux26". In my opinion "linux26" should be a default option of
installing netinst Sarge Debian, but I am just a newbie in Linux.
Formerly I had a problem with my CSA-649U controller in 2.4 kernel -
installation was not successful what was reported as Bug #321454. So the
problem was sold in 2.6 kernel. Thanks a lot!
Best regards,
Maciej Słojewski
--
Służbowy stacjonarny: +48 (58) 555-77-30 (8:00 - 16:00)
Służbowy komóra: +48 601 403 775
Prywatny komóra: +48 609 571 748 (Plus GSM)
Tlen: mslonik@tlen.pl
GG: 3321025
Skype: maciej_slojewski
Reply to: