Bug#320807: Package: installation-reports
Package: installation-reports
INSTALL REPORT
Debian-installer-version: 7 June 2005 cdimage.debian.org Sarge Business Card
uname -a: Linux laptop 2.6.8-2-686 #1 Thu May 19 17:53:30 JST 2005 i686
GNU/Linux
Date: 12 July 2005
Method: How did you install? Network Install What did you boot off? CDROM If
network install, from where? ftp.us.debian.org Proxied? No
Machine: HP Omnibook xe4500
Processor: 1.7 GHz Pentium 4 Mobile
Memory: 512 MB
Root Device: /dev/hda5 IDE
Root Size: 5 GB
fstab:
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/hda5 / ext3 defaults,errors=remount-ro 0 1
/dev/hda8 none swap sw 0 0
/dev/hdc /media/cdrom0 iso9660 ro,user,noauto 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto 0 0
laptop1:/ /laptop1 nfs
rsize=8192,wsize=8192,timeo=14,intr,noauto
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/hda5 5060064 4099104 703924 86% /
tmpfs 257884 0 257884 0% /dev/shm
tmpfs 10240 740 9500 8% /dev
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: ALi Corporation M1671 Super P4 Northbridge
[AGP4X,PCI
and SDR/DDR] (rev 02)
0000:00:01.0 PCI bridge: ALi Corporation PCI to AGP Controller
0000:00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
0000:00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link
Controller Audio Device (rev 02)
0000:00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV]
0000:00:08.0 Modem: ALi Corporation M5457 AC'97 Modem Controller
0000:00:09.0 Network controller: Intersil Corporation Prism 2.5 Wavelan
chipset
(rev 01)
0000:00:0a.0 CardBus bridge: Texas Instruments PCI1520 PC card Cardbus
Controller (rev 01)
0000:00:0a.1 CardBus bridge: Texas Instruments PCI1520 PC card Cardbus
Controller (rev 01)
0000:00:0c.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000
Controller (PHY/Link)
0000:00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c4)
0000:00:11.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
0000:00:12.0 Ethernet controller: National Semiconductor Corporation DP83815
(MacPhyter) Ethernet Controller
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility
M6
LY
0000:00:00.0 0600: 10b9:1671 (rev 02)
0000:00:01.0 0604: 10b9:5247
0000:00:02.0 0c03: 10b9:5237 (rev 03)
0000:00:06.0 0401: 10b9:5451 (rev 02)
0000:00:07.0 0601: 10b9:1533
0000:00:08.0 0703: 10b9:5457
0000:00:09.0 0280: 1260:3873 (rev 01)
0000:00:0a.0 0607: 104c:ac55 (rev 01)
0000:00:0a.1 0607: 104c:ac55 (rev 01)
0000:00:0c.0 0c00: 104c:8026
0000:00:10.0 0101: 10b9:5229 (rev c4)
0000:00:11.0 0680: 10b9:7101
0000:00:12.0 0200: 100b:0020
0000:01:00.0 0300: 1002:4c59
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
1) My only Internet access is via dialup. I wanted to do a net install, but
could not connect directly to the Internet with this computer. I had to
network to a second computer and use that as a gateway.
2) I have a parallel printer, but udev refused to create the lp0 device node.
3) The Ali M5451 audio controller is using ALSA, but the ALSA support packages
were not automatically installed. After experiencing sound problems, I
finally
figured out that these packages were necessary for proper operation.
4) I used tasksel (desktop environment) for automatic package selection. Both
KDE and Gnome were installed. It might be better to allow the user to choose
which one(s) to install and not be forced into having both.
Install logs and other status info is available in /var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.
Reply to: