Bug#320660: INSTALL REPORT
Package: installation-reports
INSTALL REPORT
Debian-installer-version: Made the first 5 CD's with Jigdo,
http://cdimage.debian.org/pub/cdimage-testing/cd/jigdo-area/i386/
with ftp.nl.debian.org mirror and some old .deb's.
uname -a: Linux twins 2.4.27-2-686-smp #1 SMP Mon May 16 16:55:31 JST
2005 i686 GNU/Linux
Date: 2005-07-25
Method: Installed only the base system from 1st CD on hda1 and hdc1.
Booted from ATAPI CD-rom. Used expert install because I wanted LILO.
Then made the md's and the lv's manually and used apt to install the
rest of the packages.
Machine: Dual MSI 694D Pro @AIR
Processor: 2x Pentium III 1 GHz
Memory: 640MB Kingston
Root Device: Western Digital WD1600JB-00GVA0, ATA UDMA/100 DISK drive
Root Size/partition table:
Disk /dev/hd[ac]: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 1 128 1028128+ 83 Linux
/dev/hda2 129 2562 19551105 fd Linux raid
autodetect
/dev/hda3 2563 11010 67858560 fd Linux raid
autodetect
/dev/hda4 11011 19457 67850527+ 83 Linux
Disk /dev/hd[eg]: 20.0 GB, 20020396032 bytes
16 heads, 63 sectors/track, 38792 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes
Device Boot Start End Blocks Id System
(Whole disks for RAID)
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options>
proc /proc proc defaults
/dev/hda1 / ext3 defaults,errors=remount-ro
/dev/md0_vg/tmp_lv /tmp reiserfs defaults
/dev/md0_vg/usr_lv /usr reiserfs defaults
/dev/md0_vg/var_lv /var reiserfs defaults
/dev/md0_vg/home_lv /home reiserfs defaults
/dev/md1 /backup ext3 defaults
#/dev/hdd /media/cdrom0 iso9660 ro,user,noauto
/dev/scd0 /media/cdrom0 iso9660 ro,user,noauto
/dev/fd0 /media/floppy0 auto rw,user,noauto
Output of /etc/mdadm/mdadm.conf:
DEVICE partitions
DEVICE /dev/hda2 /dev/hdc2 /dev/hde /dev/hdg
DEVICE /dev/hda3 /dev/hdc3
ARRAY /dev/md0 level=raid0 num-devices=4
UUID=8d261ac1:896ece7a:01460e0b:5b447bd1
devices=/dev/hda2,/dev/hdc2,/dev/hde,/dev/hdg
ARRAY /dev/md1 level=raid1 num-devices=2
UUID=e5ad67f3:810709aa:becf1202:98fa32d9
devices=/dev/hda3,/dev/hdc3
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo
PRO133x] (rev c4)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo
MVP3/Pro133x AGP]
0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super
South] (rev 40)
0000:00:07.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 16)
0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 16)
0000:00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super
ACPI] (rev 40)
0000:00:07.5 Multimedia audio controller: VIA Technologies, Inc.
VT82C686 AC97 Audio Controller (rev 50)
0000:00:0c.0 RAID bus controller: Promise Technology, Inc. PDC20265
(FastTrak100 Lite/Ultra100) (rev 02)
0000:00:0d.0 FireWire (IEEE 1394): Texas Instruments TSB12LV26 IEEE-1394
Controller (Link)
0000:00:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
0000:00:0f.0 Multimedia video controller: Brooktree Corporation Bt848
Video Capture (rev 12)
0000:00:11.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus
Controller (rev 01)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV11
[GeForce2 MX/MX 400] (rev a1)
0000:00:00.0 0600: 1106:0691 (rev c4)
0000:00:01.0 0604: 1106:8598
0000:00:07.0 0601: 1106:0686 (rev 40)
0000:00:07.1 0101: 1106:0571 (rev 06)
0000:00:07.2 0c03: 1106:3038 (rev 16)
0000:00:07.3 0c03: 1106:3038 (rev 16)
0000:00:07.4 0600: 1106:3057 (rev 40)
0000:00:07.5 0401: 1106:3058 (rev 50)
0000:00:0c.0 0104: 105a:0d30 (rev 02)
0000:00:0d.0 0c00: 104c:8020
0000:00:0e.0 0200: 10ec:8139 (rev 10)
0000:00:0f.0 0400: 109e:0350 (rev 12)
0000:00:11.0 0607: 104c:ac50 (rev 01)
0000:01:00.0 0300: 10de:0110 (rev a1)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [ ]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
I wanted quite a complicated setup wich I had read wasn't supported (and
didn't expect it to be). Allthough both MD and LVM were supported but
not LVM on MD.
During CD detection my external firewire Plextor CD/DVD `DVDR PX-504A'
was not found. Allthough with the 2.4 kernel it could be manually loaded
with `echo "scsi add-single-device 0 0 0 0" > /proc/scsi/scsi' and with
the 2.6 kernel it could be mounted straight away.
The 2.6 kernel would freeze during use of the plextor.
Greetings,
Remko Bolt
The Netherlands
Reply to: