Bug#307106: Installation report
Package: installation-reports
INSTALL REPORT
debian-installer-version: sarge 11 march 2005
Uname -a:Linux debacer 2.6.8-2-686 #1 Mon Jan 24 03:58:38 EST 2005 i686 unknown
(setting an old root partition at lilo prompt)
Date:30 april 2005
Method: bootable CD
machine: Acer Travelmate 4002WLCi
Processor: Intel Pentium M725 (Centrino 1.6 GHz)
Memory: 256 MB
Root Device: IDE disk - hda9
Root Size/partition table:
Command (m for help):
Disk /dev/hda: 255 heads, 63 sectors, 4864 cylinders
Units = cylinders of 16065 * 512 bytes
Device Boot Start End Blocks Id System
/dev/hda1 1 383 3076416 12 Compaq diagnostics
/dev/hda2 * 384 1543 9317700 7 HPFS/NTFS
/dev/hda3 1544 4226 21551197+ f Win95 Ext'd (LBA)
/dev/hda5 1544 1805 2104483+ b Win95 FAT32
/dev/hda6 1806 3021 9767488+ 83 Linux
/dev/hda7 3022 3083 497983+ 82 Linux swap
/dev/hda8 3084 3594 4104576 83 Linux
/dev/hda9 3595 4226 5076508+ 83 Linux - /
output of lspci and lspci -n (from an old woody installation on the same laptop):
woody:~# lspci
0000:00:00.0 Host bridge: Intel Corp. 82852/855GM Host Bridge (rev 02)
0000:00:00.1 System peripheral: Intel Corp. 855GM/GME GMCH Memory I/O Control
Registers (rev 02)
0000:00:00.3 System peripheral: Intel Corp. 855GM/GME GMCH Configuration Process
Registers (rev 02)
0000:00:02.0 VGA compatible controller: Intel Corp. 82852/855GM Integrated
Graphics Device (rev 02)
0000:00:02.1 Display controller: Intel Corp. 82852/855GM Integrated Graphics
Device (rev 02)
0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
USB UHCI Controller #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
USB UHCI Controller #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
USB UHCI Controller #3 (rev 03)
0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI
Controller (rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 83)
0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 03)
0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA Storage
Controller (rev 03)
0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus
Controller (rev 03)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
0000:00:1f.6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem
Controller (rev 03)
0000:02:02.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01)
0000:02:04.0 Network controller: Intel Corp. PRO/Wireless 2200BG (rev 05)
0000:02:06.0 CardBus bridge: Texas Instruments: Unknown device 8031
0000:02:06.2 FireWire (IEEE 1394): Texas Instruments: Unknown device 8032
0000:02:06.3 Unknown mass storage controller: Texas Instruments: Unknown device 8033
woody:~# lspci -n
0000:00:00.0 0600: 8086:3580 (rev 02)
0000:00:00.1 0880: 8086:3584 (rev 02)
0000:00:00.3 0880: 8086:3585 (rev 02)
0000:00:02.0 0300: 8086:3582 (rev 02)
0000:00:02.1 0380: 8086:3582 (rev 02)
0000:00:1d.0 0c03: 8086:24c2 (rev 03)
0000:00:1d.1 0c03: 8086:24c4 (rev 03)
0000:00:1d.2 0c03: 8086:24c7 (rev 03)
0000:00:1d.7 0c03: 8086:24cd (rev 03)
0000:00:1e.0 0604: 8086:2448 (rev 83)
0000:00:1f.0 0601: 8086:24cc (rev 03)
0000:00:1f.1 0101: 8086:24ca (rev 03)
0000:00:1f.3 0c05: 8086:24c3 (rev 03)
0000:00:1f.5 0401: 8086:24c5 (rev 03)
0000:00:1f.6 0703: 8086:24c6 (rev 03)
0000:02:02.0 0200: 14e4:4401 (rev 01)
0000:02:04.0 0280: 8086:4220 (rev 05)
0000:02:06.0 0607: 104c:8031
0000:02:06.2 0c00: 104c:8032
0000:02:06.3 0180: 104c:8033
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [ ]
Reboot: [O]
Comments/Problems:
After installing the base system, at the next boot, the system hangs during the
init process with the following messages:
..........
/etc/rcS.d/S36discover: line 204: 1421 segmentation fault modprobe $MODULE
uhci_hcd disabled in configuration
ehci_hcd disabled in configuration
running 0dns-down to make sure resolv.conf is ok ... done
Initializing: /etc/network/ifstate
Starting hotplug system:
pci
<6> Linux - Agpgart interface v0.100 (c) Dave Jones
................. the boot process stops here
Install logs and other status info is available in /var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.
Regards,
Andrea Brenci
____________________________________________________________
6X velocizzare la tua navigazione a 56k? 6X Web Accelerator di Libero!
Scaricalo su INTERNET GRATIS 6X http://www.libero.it
Reply to: