Bug#305844: (forw) RE: Bug#305844: Package: installation-reports
----- Forwarded message from "Mueller, Ulf" <umueller@ips-datenservice.de> -----
Subject: RE: Bug#305844: Package: installation-reports
Date: Mon, 25 Apr 2005 10:04:05 +0200
From: "Mueller, Ulf" <umueller@ips-datenservice.de>
To: Christian Perrier <bubulle@debian.org>
>From: Christian Perrier [mailto:bubulle@debian.org]
>Sent: Friday, April 22, 2005 5:53 PM
>To: Mueller, Ulf; 305844@bugs.debian.org
>Subject: Re: Bug#305844: Package: installation-reports
>
>Quoting Mueller, Ulf (umueller@ips-datenservice.de):
>> Package: installation-reports
>>
>> Debian-installer-version: sarge-i386-netinst.iso (rc3 and nightly
>> build
>> 20050421)
>> uname -a: n/a
>> Date: 22.04.2005
>> Method: boot from above mentioned cd (IDE)
>>
>> Machine: HP ProLiant ML110 with Adaptec 2610SA 6-port
>SATA-RAID (some
>> OEM-stuff also found in DELL servers)
>> Processor: P4
>> Memory: 1,5GB
>> Root Device: n/a
>> Root Size/partition table: n/a
>> Output of lspci and lspci -n: n/a
>
>We need that to properly process this bug report.
>
>Could you try booting with some LiveCD such as Knoppix and issue the
>following:
>
>(lspci ; lcpci -n) | sort
I guess lcpci is a typo and should be lspci. I used Knoppix 3.8.1 (2005-04-08) for this, output can be found at the end of this mail.
>> Comments/Problems: Harddisc(s) attachted to Adaptec 2610SA
>not found,
>> modprobe -v aacraid failed
>
>Have you tried booting with "linux26" at the boot prompt?
I did. This message didn't show up with linux26, but there was no partitionable media found too.
knoppix@1[scsi]$ (lspci ; lspci -n) | sort
0000:00:00.0 0600: 8086:2588 (rev 05)
0000:00:00.0 Host bridge: Intel Corp. Server Memory Controller Hub (rev 05)
0000:00:01.0 0604: 8086:2589 (rev 05)
0000:00:01.0 PCI bridge: Intel Corp. Server Memory Controller Hub PCI Express Port (rev 05)
0000:00:1c.0 0604: 8086:2660 (rev 03)
0000:00:1c.0 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
0000:00:1d.0 0c03: 8086:2658 (rev 03)
0000:00:1d.0 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
0000:00:1d.1 0c03: 8086:2659 (rev 03)
0000:00:1d.1 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
0000:00:1d.2 0c03: 8086:265a (rev 03)
0000:00:1d.2 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
0000:00:1d.3 0c03: 8086:265b (rev 03)
0000:00:1d.3 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
0000:00:1d.7 0c03: 8086:265c (rev 03)
0000:00:1d.7 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
0000:00:1e.0 0604: 8086:244e (rev d3)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev d3)
0000:00:1f.0 0601: 8086:2640 (rev 03)
0000:00:1f.0 ISA bridge: Intel Corp. 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03)
0000:00:1f.1 0101: 8086:266f (rev 03)
0000:00:1f.1 IDE interface: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
0000:00:1f.3 0c05: 8086:266a (rev 03)
0000:00:1f.3 SMBus: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
0000:01:00.0 0604: 8086:032c (rev 09)
0000:01:00.0 PCI bridge: Intel Corp. PCI Bridge Hub (rev 09)
0000:01:00.1 0800: 8086:0326 (rev 09)
0000:01:00.1 PIC: Intel Corp. PCI Bridge Hub I/OxAPIC Interrupt Controller A (rev 09)
0000:02:03.0 0104: 9005:0285 (rev 01)
0000:02:03.0 RAID bus controller: Adaptec AAC-RAID (rev 01)
0000:0a:01.0 0200: 8086:1076 (rev 05)
0000:0a:01.0 Ethernet controller: Intel Corp. 82541GI/PI Gigabit Ethernet Controller (rev 05)
0000:0a:03.0 0300: 1002:4752 (rev 27)
0000:0a:03.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
knoppix@1[scsi]$ more /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ADAPTEC Model: AAR-2610SA RAID5 Rev: V1.0
Type: Direct-Access ANSI SCSI revision: 02
----- End forwarded message -----
--
Reply to: