Bug#305744: install report
Package: installation-reports
INSTALL REPORT
Debian-installer-version: 20April05
http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/rc3/sarge-i386-netinst.iso
uname -a: Linux sc0h8r 2.6.8-2-386 #1 Mon Jan 24 03:01:58 EST 2005 i686
GNU/Linux
Date: 19April05 @ 22:00 Mountain Time
Method: How did you install? network What did you boot off? netinst.iso
cd If network install, from where?
deb http://mirrors.xmission.com/debian/ testing main Proxied? no
Machine: homemade tower kt7-raid board
Processor: 1.2Ghz AMD Duron
Memory: 256meg
Root Device: IDE WDC WD400BB-75DEA0, ATA DISK drive
Root Size/partition table: 10 gig (no other partition)
Output of sfdisk -l:
Disk /dev/hda: 77504 cylinders, 16 heads, 63 sectors/track
Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.
Warning: The partition table looks like it was made
for C/H/S=*/255/63 (instead of 77504/16/63).
For this listing I'll assume that geometry.
Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from
0
Device Boot Start End #cyls #blocks Id System
/dev/hda1 * 0+ 454 455- 3654756 b W95 FAT32 (Windows
2kPRO)
/dev/hda2 782 4862 4081 32780632+ f W95 Ext'd (LBA)
/dev/hda3 455 781 327 2626627+ 83 Linux (empty
partition)
/dev/hda4 0 - 0 0 0 Empty
/dev/hda5 782+ 2356 1575- 12651156 b W95 FAT32
/dev/hda6 3635+ 4399 765- 6144831 83 Linux (SuSE 8.2)
/dev/hda7 4400+ 4416 17- 136521 82 Linux swap
/dev/hda8 4417+ 4862 446- 3582463+ 83 Linux (Debian)
/dev/hda9 * 2357+ 3634 1278- 10265503+ 83 Linux
(Debian-sarge--new netinstall)
Output of lspci and lspci -n:
lspci:
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365
[KT133/KM133] (rev 03)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133
AGP]
0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super
South] (rev 40)
0000:00:07.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 16)
0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 16)
0000:00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
(rev 40)
0000:00:09.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX
[Cyclone] (rev 30)
0000:00:0b.0 VGA compatible controller: ATI Technologies Inc Rage 128
PP/PRO TMDS [Xpert 128]
0000:00:11.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02)
lspci -n:
0000:00:00.0 0600: 1106:0305 (rev 03)
0000:00:01.0 0604: 1106:8305
0000:00:07.0 0601: 1106:0686 (rev 40)
0000:00:07.1 0101: 1106:0571 (rev 06)
0000:00:07.2 0c03: 1106:3038 (rev 16)
0000:00:07.3 0c03: 1106:3038 (rev 16)
0000:00:07.4 0680: 1106:3057 (rev 40)
0000:00:09.0 0200: 10b7:9055 (rev 30)
0000:00:0b.0 0300: 1002:5050
0000:00:11.0 0401: 1274:5880 (rev 02)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
<Description of the install, in prose, and any thoughts, comments and
ideas you had during the initial install.>
Install was fine. The only minor problem was after creating space on the
logical partition to install Debian, I had to sit and think the
partition number so I could tell the installer which partition to start
grub since I didn't install it on MBR.
I didn't care for the fonts when KDE booted. They were very jagged. I am
still having problems setting up my printer (Brother HL-1440), but that
is under cups and nothing to do with installation.
Overall, very smooth installation process and I have used Debian since
about .9 or something like that!
Install logs and other status info is available
in /var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.
--
I have and use:
FreeBSD, OS/2, SuSE, Fedora
Mandrake, M$2kpro, OpenBSD
Debian, Slackware & Amiga
ICQ# 54186124
God's best to you!
Reply to: