Bug#304227: OK but wrong console font chosen

[Tomasz Bloch <tbloch@epf.pl>]

Package: installation-reports

INSTALL REPORT

Debian-installer-version: rc3
uname -a: Linux hydra 2.4.27-2-k6 #1 Thu Jan 20 11:18:09 JST 2005 i586  
GNU/Linux
Date: 2005.04.08 20-23 CEST (aprox.)
Method: boot from cd sarge-buissnesscard.iso,
	install from ftp://mirror.ipartners.pl,
	no proxy
Machine:
Processor: k6-2 400 MHz
Memory: 192 MB
Root Device: IDE /dev/hda1
Root Size/partition table:
Disk /dev/hda: 4311 MB, 4311465984 bytes
255 heads, 63 sectors/track, 524 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device    Boot      Start         End      Blocks   Id  System
   /dev/hda1   *           1         524     4208998+  83  Linux

Output of lspci and lspci -n:
lspci:
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3]  
(rev 04)0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x  
[Apollo MVP3/Pro133x AGP]
0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA  
[Apollo VP] (rev 47)
0000:00:07.1 IDE interface: VIA Technologies, Inc.  
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:07.3 Host bridge: VIA Technologies, Inc. VT82C586B ACPI (rev 10)
0000:00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd.  
RTL-8139/8139C/8139C+ (rev 10)
0000:00:0c.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97]  
(rev 06)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV5M64 [RIVA  
TNT2 Model 64/Model 64 Pro] (rev 15)
lspci -n:
0000:00:00.0 0600: 1106:0598 (rev 04)
0000:00:01.0 0604: 1106:8598
0000:00:07.0 0601: 1106:0586 (rev 47)
0000:00:07.1 0101: 1106:0571 (rev 06)
0000:00:07.3 0600: 1106:3040 (rev 10)
0000:00:0a.0 0200: 10ec:8139 (rev 10)
0000:00:0c.0 0401: 1274:1371 (rev 06)
0000:01:00.0 0300: 10de:002d (rev 15)

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [ ]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [O]

Comments/Problems:
1. Wrong font chosen by installer ?
Polish characters displayed incorrectly after reboot.
In /etc/console-toools/config I had:
SCREEN_FONT=lat2-sun16
After change to lat2u-16 everything is OK.