[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#301444: bad nvidia resolution 800 x 600



Package: installation-reports

Debian-installer-version:

sarge-i386-netinst.iso
Date, end of february 2005
must have been release cabdidate 2

http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/rc3/sarge-i386-netinst.iso

the  name of the cd  is Debian testing i386    bin-1

modified  sun 21 november 2004



uname -a:

Linux debian 2.4.27-1-386 #1 Fri Sep 3 06:24:46 UTC 2004 i686 GNU/Linux

Date:
I installed several times during march 2005


Method:

network install,
I booted from the cd,
the ftp server from debian was automatically found

no proxy server,  I had my DLink router connected to
an ADSL modem

later I selected packages with aptitude and dselect from
http://sunsite.informatik.rwth-aachen.de/

On this machine Win2k, winxp, suse 8.2 suse 9.2 and solaris 9 x86
runs sucessfully

Machine:

Pentium II  CPU  with 256 MB RAM,
3com 590  NIC

Machine buildt for Windows NT4 and later upgraded



Processor:  Pentium II  366 MHz

Memory:   256 MB RAM



Root Device:

Symbios Logic SCSI

I have IDE Hard disks,
SCSI Iomega ZIP,
SCSI CDRecorder
No SCSI Hard Disk

Root Size/partition table:

Partition Table for /dev/hda

              First       Last
# Type Sector Sector Offset Length Filesystem Type (ID) Flag -- ------- ----------- ----------- ------ ----------- -------------------- ----
/*  here is windows XP  */
1 Primary 0 19454714* 63 19454715*HPFS/NTFS (07) None None 19454715* 19456415 0 1701*Unusable None

/* here is solaris 9 x86 */
2 Primary 19456416 42213023 0 22756608 Linux swap (82) Boot

/* here is debian sarge  mount point  /   */
3 Primary 42213024 59791535 0 17578512 Linux (83) None 4 Primary 59791536 61745039 0 1953504 W95 Ext'd (LBA) (0F) None

/* here is the swap for debian sarge  */
5 Logical 59791536 61745039 63 1953504 Linux swap (82) None Logical 61745040 78165359 0 16420320 Free Space None




Output of lspci and lspci -n:

debian:~# lspci
0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03) 0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
0000:00:04.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:04.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:04.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:04.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
0000:00:09.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 08)
0000:00:0b.0 Ethernet controller: 3Com Corporation 3c590 10BaseT [Vortex]
0000:00:0d.0 SCSI storage controller: LSI Logic / Symbios Logic 53c815 (rev 04)

#  This is a big problem for me
0000:01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev b 2) # no errors, but neither gnome not KDE offers better resolution than 800 x 600

debian:~# lspci -n
0000:00:00.0 0600: 8086:7190 (rev 03)
0000:00:01.0 0604: 8086:7191 (rev 03)
0000:00:04.0 0601: 8086:7110 (rev 02)
0000:00:04.1 0101: 8086:7111 (rev 01)
0000:00:04.2 0c03: 8086:7112 (rev 01)
0000:00:04.3 0680: 8086:7113 (rev 02)
0000:00:09.0 0401: 1274:1371 (rev 08)
0000:00:0b.0 0200: 10b7:5900
0000:00:0d.0 0100: 1000:0004 (rev 04)
0000:01:00.0 0300: 10de:0110 (rev b2)
debian:~#





Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader: [O] # this was ok since I selected to use GRUB from floppy
Reboot:                 [O]

Comments/Problems:

The big problem was the video card,
during the second installation I paid high attention to
supply correct information about  monitor frequencies

31-65 KHz / 50-120 Hz

still I only have a bad resolution

     -> applications
     -> desktop preferences
     -> screen resolution
          800 x 600  #
          640 x 480  #  this is not acceptable

usually I have 1024 x 768

How can I change this ?

the network ftp  installation was very good.

I hope that some comments about how to start up xfree86 can help.

I also noticed some complaints and warnings about the NVidia video card,
but I didn't know it was that bad.

How can I configure the screen resolution of my NVidia Video Card?

Also windowmaker  would have been a nice alternative to gnome and KDE
But this KDE looks really nice.



Best regards

Morten Gulbrandsen



















Reply to: