Package: installation-reports INSTALL REPORT Debian-installer-version: pre-rc3 netinst image http://cdimage.debian.org/pub/cdimage-testing/daily/alpha/20050316/sarge-alpha-netinst.iso uname -a: Linux quetz 2.4.27-2-generic #1 Tue Feb 15 01:56:26 UTC 2005 alpha GNU/Linux Date: 2005-03-17 01:49 -0800 Method: CD netinst boot Machine: Digital AlphaPC 164LX 533 MHz Processor: EV56 533 MHz Memory: 384MB Root Device: /dev/hda5 Root Size/partition table: # fdisk -l /dev/hda Disk /dev/hda: 10.2 GB, 10262568960 bytes 16 heads, 63 sectors/track, 19885 cylinders Units = cylinders of 1008 * 512 = 516096 bytes 6 partitions: # start end size fstype [fsize bsize cpg] a: 1* 1* 0* ext2 b: 1* 7* 6* ext2 c: 7* 69* 62* swap d: 99 753 655 ext2 e: 754 1247 494 ext2 # grep hda /etc/fstab /dev/hda5 / ext3 defaults,errors=remount-ro 0 1 /dev/hda2 /boot ext2 defaults 0 2 /dev/hda3 none swap sw 0 0 # Output of lspci and lspci -n: # lspci 0000:00:05.0 VGA compatible controller: Matrox Graphics, Inc. MGA 2164W [Millennium II] 0000:00:06.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 02) 0000:00:06.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 02) 0000:00:07.0 PCI bridge: Digital Equipment Corporation DECchip 21050 (rev 02) 0000:00:08.0 Non-VGA unclassified device: Intel Corp. 82378ZB/IB, 82379AB (SIO, SIO.A) PCI to ISA Bridge (rev 43) 0000:00:09.0 USB Controller: NEC Corporation USB (rev 41) 0000:00:09.1 USB Controller: NEC Corporation USB (rev 41) 0000:00:09.2 USB Controller: NEC Corporation USB 2.0 (rev 02) 0000:00:0b.0 IDE interface: Silicon Image, Inc. (formerly CMD Technology Inc) PCI0646 (rev 01) 0000:01:00.0 Ethernet controller: Digital Equipment Corporation DECchip 21040 [Tulip] (rev 23) 0000:01:01.0 SCSI storage controller: QLogic Corp. ISP1020 Fast-wide SCSI (rev 01) 0000:01:02.0 SCSI storage controller: QLogic Corp. ISP1020 Fast-wide SCSI (rev 01) # lspci -n 0000:00:05.0 0300: 102b:051b 0000:00:06.0 0400: 109e:036e (rev 02) 0000:00:06.1 0480: 109e:0878 (rev 02) 0000:00:07.0 0604: 1011:0001 (rev 02) 0000:00:08.0 0000: 8086:0484 (rev 43) 0000:00:09.0 0c03: 1033:0035 (rev 41) 0000:00:09.1 0c03: 1033:0035 (rev 41) 0000:00:09.2 0c03: 1033:00e0 (rev 02) 0000:00:0b.0 0101: 1095:0646 (rev 01) 0000:01:00.0 0200: 1011:0002 (rev 23) 0000:01:01.0 0100: 1077:1020 (rev 01) 0000:01:02.0 0100: 1077:1020 (rev 01) # Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: Smooth as a baby's bottom. On initial boot, I did see a couple of kernel error messages, apparently related to modules, flash across the screen while the front-end was being set up. No real problems, though -- there are still various known blemishes on alpha that could use cleaning up post-sarge, but this definitely looks releasable to me. -- Steve Langasek postmodern programmer
Attachment:
signature.asc
Description: Digital signature