[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#296593: Installer will not load mptscsih module after aic7xxx is loaded



Package: debian-installer
Version: unstable daily-build 2005-02-21

Baed on symptoms, this seems to be same issue
as https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=107749 -
(got same message in dmesg during debian install as below with
redhat...)

Workaround given in redhat bug report: remove adaptec card during install
(lsi mpt is on-mobo).

Excerpted from redhat (tm) bugzilla:

Opened by  (Nate Golnik) on 2003-10-22 13:11

From Bugzilla Helper:
User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.0.2) Gecko/20030716

Description of problem:
Attempting to install QU2 on a Dell 1750 with an LSI MPT scsi controller for the
onboard disks and a Adaptec 39160 for connecting to a Dell Powervault 220.

During the install aic7xxx loads followed by mptscsih.  Mptscsih fails 
out with the following:

mptbase:  Initiating ioc0 bringup
     ioc0: ERROR Doorbell Ack timeout (2)
     ioc0: ERROR Doorbell Ack timeout (2)
     ioc0: ERROR Diagnostic reset failed (102h)
     ioc0: Not Ready Warning
     WARNING: ioc0 did not initalize properly! (-1)
Repeats for ioc1
mptbase: 2 mpt adapters found, 0 installed.

Attachment: pgp3xHfDyoDE8.pgp
Description: PGP signature


Reply to: