Bug#292314: installation-report
Package: installation-reports
INSTALL REPORT
Debian-installer-version:
2005-01-24
http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/rc2/sarge-i386-businesscard.iso
uname -a:
Date:
Mi Jan 24 19:02:32 CET 2005
Method: How did you install? What did you boot off? If network
install, from where? Proxied?
- Businesscard with FTP
- CD
- ftp.de.debian.org
- no proxy
Machine:
SONY VAIO PCG-F709
Processor:
Pentium III (Coppermine)
Memory:
256744 kB
Root Device:
LVM on /dev/hda: /dev/mapper/system-root
Root Size/partition table: Feel free to paste the full partition
table, with notes on which partitions are mounted where.
Disk /dev/hda: 18.1 GB, 18141806592 bytes
255 heads, 63 sectors/track, 2205 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 783 6289416 7 HPFS/NTFS
/dev/hda2 784 1305 4192965 c W95 FAT32 (LBA)
/dev/hda3 1306 2205 7229250 f W95 Ext'd (LBA)
/dev/hda5 1306 1336 248976 83 Linux /boot
/dev/hda6 1337 2205 6980211 8e Linux LVM VG system
--- Logical volume ---
LV Name /dev/system/swap
VG Name system
LV UUID o5CdM4-IoHf-F5DT-fZ8l-hO8G-5CA9-I8QacB
LV Write Access read/write
LV Status available
# open 1
LV Size 512,00 MB
Current LE 128
Segments 1
Allocation inherit
Read ahead sectors 0
Block device 254:0
--- Logical volume ---
LV Name /dev/system/root
VG Name system
LV UUID DxG1KF-c0c5-Xy2t-I2st-j0F6-s9YT-Mk91F1
LV Write Access read/write
LV Status available
# open 1
LV Size 6,16 GB
Current LE 1576
Segments 1
Allocation inherit
Read ahead sectors 0
Block device 254:1
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
(rev 03)
0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge
(rev 03)
0000:00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 03)
0000:00:08.0 FireWire (IEEE 1394): Sony Corporation CXD3222 i.LINK Controller
(rev 02)
0000:00:09.0 Multimedia audio controller: Yamaha Corporation YMF-744B [DS-1S
Audio Controller] (rev 02)
0000:00:0a.0 Communication controller: Conexant HSF 56k Data/Fax Modem (Mob
WorldW SmartDAA) (rev 01)
0000:00:0c.0 CardBus bridge: Ricoh Co Ltd RL5c478 (rev 80)
0000:00:0c.1 CardBus bridge: Ricoh Co Ltd RL5c478 (rev 80)
0000:01:00.0 VGA compatible controller: Neomagic Corporation NM2380
[MagicMedia 256XL+] (rev 10)
0000:06:00.0 Ethernet controller: Xircom Cardbus Ethernet 10/100 (rev 03)
0000:06:00.1 Serial controller: Xircom Cardbus Ethernet + 56k Modem (rev 03)
0000:00:00.0 0600: 8086:7190 (rev 03)
0000:00:01.0 0604: 8086:7191 (rev 03)
0000:00:07.0 0601: 8086:7110 (rev 02)
0000:00:07.1 0101: 8086:7111 (rev 01)
0000:00:07.2 0c03: 8086:7112 (rev 01)
0000:00:07.3 0680: 8086:7113 (rev 03)
0000:00:08.0 0c00: 104d:8039 (rev 02)
0000:00:09.0 0401: 1073:0010 (rev 02)
0000:00:0a.0 0780: 14f1:2443 (rev 01)
0000:00:0c.0 0607: 1180:0478 (rev 80)
0000:00:0c.1 0607: 1180:0478 (rev 80)
0000:01:00.0 0300: 10c8:0016 (rev 10)
0000:06:00.0 0200: 115d:0003 (rev 03)
0000:06:00.1 0700: 115d:0103 (rev 03)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [E]
Install boot loader: [ ]
Reboot: [ ]
Comments/Problems:
The actual 2.6 kernel won't install on a LVM root partition
because it needs dmsetup which hasn't been installed prior
to the kernel installation.
Maybe one should just add dmsetup to the list of packages that
have to be installed if the root fs is on a LVM device.
Install logs and other status info is available in /var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.
Reply to: