Bug#291839: installation-reports
Package: installation-reports
INSTALL REPORT
Debian-installer-version: Debian Sarge netinst RC2, obtained from debian.org
on January 22, 2005.
uname -a:
Linux allyourbase 2.6.8-1-386 #1 Thu Nov 11 12:18:43 EST 2004 i686 GNU/Linux
Date: January 22, 2005 8:00 PM EST
Method: Network install, booted from CD, done from my home.
ftp.us.debian.org was used as my source.
Machine: Dell Latitude C800
Processor: Pentium III 850 mHz
Memory: 128 MB
Root Device: IDE, model HITACHI_DK23BA-20
Root Size/partition table:
Disk /dev/hda: 20.0 GB, 20003880960 bytes
16 heads, 63 sectors/track, 38760 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 38020 19162048+ 83 Linux
/dev/hda2 38021 38760 372960 f W95 Ext'd (LBA)
/dev/hda5 38021 38760 372928+ 82 Linux swap
Output of lspci and lspci -n:
llyourbase:~# lspci
0000:00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge
and Memory Controller Hub (rev 02)
0000:00:01.0 PCI bridge: Intel Corp. 82815 815 Chipset AGP Bridge (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 02)
0000:00:1f.0 ISA bridge: Intel Corp. 82801BAM ISA Bridge (LPC) (rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801BAM IDE U100 (rev 02)
0000:00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 02)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Rage
Mobility M4 AGP
0000:02:03.0 Multimedia audio controller: ESS Technology ES1983S
Maestro-3i PCI Audio Accelerator (rev 10)
0000:02:06.0 Ethernet controller: 3Com Corporation 3c556 Hurricane
CardBus [Cyclone] (rev 10)
0000:02:06.1 Communication controller: 3Com Corporation Mini PCI 56k
Winmodem (rev 10)
0000:02:0f.0 CardBus bridge: Texas Instruments PCI4451 PC card Cardbus
Controller
0000:02:0f.1 CardBus bridge: Texas Instruments PCI4451 PC card Cardbus
Controller
0000:02:0f.2 FireWire (IEEE 1394): Texas Instruments PCI4451 IEEE-1394
Controller
allyourbase:~# lspci
0000:00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge
and Memory Controller Hub (rev 02)
0000:00:01.0 PCI bridge: Intel Corp. 82815 815 Chipset AGP Bridge (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 02)
0000:00:1f.0 ISA bridge: Intel Corp. 82801BAM ISA Bridge (LPC) (rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801BAM IDE U100 (rev 02)
0000:00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 02)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Rage
Mobility M4 AGP
0000:02:03.0 Multimedia audio controller: ESS Technology ES1983S
Maestro-3i PCI Audio Accelerator (rev 10)
0000:02:06.0 Ethernet controller: 3Com Corporation 3c556 Hurricane
CardBus [Cyclone] (rev 10)
0000:02:06.1 Communication controller: 3Com Corporation Mini PCI 56k
Winmodem (rev 10)
0000:02:0f.0 CardBus bridge: Texas Instruments PCI4451 PC card Cardbus
Controller
0000:02:0f.1 CardBus bridge: Texas Instruments PCI4451 PC card Cardbus
Controller
0000:02:0f.2 FireWire (IEEE 1394): Texas Instruments PCI4451 IEEE-1394
Controller
allyourbase:~# lspci -n
0000:00:00.0 0600: 8086:1130 (rev 02)
0000:00:01.0 0604: 8086:1131 (rev 02)
0000:00:1e.0 0604: 8086:2448 (rev 02)
0000:00:1f.0 0601: 8086:244c (rev 02)
0000:00:1f.1 0101: 8086:244a (rev 02)
0000:00:1f.2 0c03: 8086:2442 (rev 02)
0000:01:00.0 0300: 1002:4d46
0000:02:03.0 0401: 125d:1998 (rev 10)
0000:02:06.0 0200: 10b7:6055 (rev 10)
0000:02:06.1 0780: 10b7:1007 (rev 10)
0000:02:0f.0 0607: 104c:ac42
0000:02:0f.1 0607: 104c:ac42
0000:02:0f.2 0c00: 104c:8027
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
The install was fairly straightforward; I've done it twice before but didn't
notice this report thing. I was slightly irritated that testing did not include
the option to check for bad blocks, as the reason for reinstalling was that my
hard drive suddently developed a significant number of them. Also, I don't know
what else you could do, but it took me a while to realize that x-window-system
was the correct package to install to get a working X system - I tried the
xfree86 packages first, and I did not use the Desktop Environment task because I
did not want KDE and GNOME. Also, I was puzzled by the lack of inclusion of
X.org, but I just went ahead with xfree86 and it is working fine.
Reply to: