Bug#291249: Package: installation-reports
Package: installation-reports
Debian-installer-version: 19.01.2005, Debian-Sarge, netinstall-iso,
cdimage.debian.org
uname -a: Linux troll 2.4.27-1-386 #1 Fri Sep 3 06:24:46 UTC 2004 i686
GNU/Linux
Date: 19.01.2005
Method: Booting from CD, Installation from LAN, private mirror (with
debmirror), pakage-update over Internet from de.debian.org
Machine: i386, P3, 1800+, K7SOm, 256Mb RAM, SiS-ChipSet for ether, vga, usb,
hdd, fdd, ser, par
Processor: amd 1800
Memory: 256Mb
Root Device: /dev/hda4
Root Size/partition table:
Disk /dev/hda: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 1 511 4104576 7 HPFS/NTFS
/dev/hda2 512 1022 4104607+ b W95 FAT32
/dev/hda3 1913 4865 23719972+ f W95 Ext'd (LBA)
/dev/hda4 * 1023 1912 7148925 83 Linux
/dev/hda5 1913 3187 10241406 7 HPFS/NTFS
/dev/hda6 3188 3200 104391 83 Linux
/dev/hda7 3201 4808 12916228+ 83 Linux
/dev/hda8 4809 4865 457821 82 Linux swap
Output of lspci:
0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 740 Host (rev 01)
0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI
bridge (AGP)
0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513
(LPC Bridge) (rev 25)
0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS]
Sound Controller (rev a0)
0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 0f)
0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 0f)
0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0
Controller
0000:00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900
PCI Fast Ethernet (rev 90)
0000:00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
0000:01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS]
65x/M650/740 PCI/AGP VGA Display Adapter
lspci -n:
0000:00:00.0 0600: 1039:0740 (rev 01)
0000:00:01.0 0604: 1039:0001
0000:00:02.0 0601: 1039:0008 (rev 25)
0000:00:02.5 0101: 1039:5513
0000:00:02.7 0401: 1039:7012 (rev a0)
0000:00:03.0 0c03: 1039:7001 (rev 0f)
0000:00:03.1 0c03: 1039:7001 (rev 0f)
0000:00:03.3 0c03: 1039:7002
0000:00:04.0 0200: 1039:0900 (rev 90)
0000:00:09.0 0200: 10ec:8139 (rev 10)
0000:01:00.0 0300: 1039:6325
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
Nice new Install-Routine!
Reply to: