[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#290303: (no subject)



Package: installation-reports

Debian-installer-version: 
20050112 from http://cdimage.debian.org/pub/cdimage-testing/daily/i386/

uname -a:
Linux powerstation 2.4.27-1-386 #1 Wed Dec 1 19:43:08 JST 2004 i686 GNU/Linux

Date: 13.01.2005 13:00

Method: 
network installation from ftp.de.debian.org, booted from 
sarge-i386-netinst.iso, no proxy used, installation mode expert

Machine: 
selfmade machine

Processor:
AMD Athlon 700 Mhz

Memory:
386716 kB

Root Device:
IDE Maxtor 4K080H4, 80GB

Root Size/partition table:
hda1 ext3 mount on /
hda2 swap
 
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] 
(rev 03)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] 
(rev 40)
0000:00:07.1 IDE interface: VIA Technologies, Inc. 
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
Controller (rev 16)
0000:00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 
40)
0000:00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 
Audio Controller (rev 50)
0000:00:0a.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] 
(rev 74)
0000:00:0c.0 Ethernet controller: VIA Technologies, Inc. VT6105 [Rhine-III] 
(rev 86)
0000:00:0d.0 VGA compatible controller: S3 Inc. 86c764/765 [Trio32/64/64V+] 
(rev 44)
0000:00:00.0 0600: 1106:0305 (rev 03)
0000:00:01.0 0604: 1106:8305
0000:00:07.0 0601: 1106:0686 (rev 40)
0000:00:07.1 0101: 1106:0571 (rev 06)
0000:00:07.2 0c03: 1106:3038 (rev 16)
0000:00:07.4 0680: 1106:3057 (rev 40)
0000:00:07.5 0401: 1106:3058 (rev 50)
0000:00:0a.0 0200: 10b7:9200 (rev 74)
0000:00:0c.0 0200: 1106:3106 (rev 86)
0000:00:0d.0 0300: 5333:8811 (rev 44)

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [ O]
Configure network HW:   [ O]
Config network:         [O ]
Detect CD:              [ O]
Load installer modules: [ O]
Detect hard drives:     [O ]
Partition hard drives:  [O ]
Create file systems:    [O ]
Mount partitions:       [ O]
Install base system:    [O ]
Install boot loader:    [O ]
Reboot:                 [ O]

Comments/Problems:
...this time i try another installation in the expert mode and choose lilo as 
bootloader. No problems. Well done! In the Debian installer menu the entry 
"choose language" is double. Could that be a bug?!





Reply to: