[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#288217: Debian Testing - Installation Report

Package: installation-reports


Debian-installer-version: rc2 (downloaded around Dec 20, 2004)
uname -a: Linux debian 2.4.27-1-386 #1 Fri Sep 3 06:24:46 UTC 2004 i586 GNU/Linux
Date: January 2, 2005 around 6:00am EST
Method: Net install, booted from a CDROM, from mirrors.kernel.org, and not proxied.

Machine: Custom AMD K6-2 500mhz computer
Processor: AMD K6-2 500mhz Computer
Memory: 256MB memory.
Root Device: IDE? Yes SCSI? No Name of device? /dev/hda (Maxtor 20GB hard drive)
Root Size/partition table:
# fdisk -l /dev/hda

Disk /dev/hda: 20.4 GB, 20490559488 bytes
255 heads, 63 sectors/track, 2491 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/hda1   *           1         823     6610716    b  W95 FAT32
/dev/hda2             824        2491    13398210    f  W95 Ext'd (LBA)
/dev/hda5             824        1078     2048256    b  W95 FAT32
/dev/hda6            1079        1141      506016   82  Linux swap
/dev/hda7            1142        1811     5381743+  83  Linux
/dev/hda8            1812        2491     5462068+  83  Linux

/dev/hda8 is / (ext3)
/dev/hda7 is another linux distribution (suse 9.0, using reiserfs)

Output of lspci and lspci -n:
0000:00:00.0 Host bridge: ALi Corporation M1541 (rev 04)
0000:00:01.0 PCI bridge: ALi Corporation M1541 PCI to AGP Controller (rev 04)
0000:00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
0000:00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV] (rev c3) 0000:00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
0000:00:0f.0 IDE interface: ALi Corporation M5229 IDE (rev c2)
0000:01:00.0 VGA compatible controller: S3 Inc. Savage 4 (rev 04)

0000:00:00.0 0600: 10b9:1541 (rev 04)
0000:00:01.0 0604: 10b9:5243 (rev 04)
0000:00:02.0 0c03: 10b9:5237 (rev 03)
0000:00:07.0 0601: 10b9:1533 (rev c3)
0000:00:09.0 0200: 10ec:8139 (rev 10)
0000:00:0f.0 0101: 10b9:5229 (rev c2)
0000:01:00.0 0300: 5333:8a22 (rev 04)

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [O]

After X was setup and it loaded, a second, un-moveable mouse cursor was
visible on the screen that could not be removed from the screen (until a
certain amount of time passed, which was a few minutes or so).
I am not sure why the second cursor appears since I only have one mouse
(a PS/2 one) connected to this system.

Reply to: