Package: installation-reports Debian-installer-version: vmlinuz-prep.initrd from people.debian.org/~luther/d-i/images/daily/powerpc/netboot/vmlinuz-prep.initrd uname -a: never got this far Date: 18-December-2004, all day long more or less Method: TFTP of local copy of vmlinuz-prep.initrd transfered from a local i386 linux system Machine: Motorola MCP750 Processor: Memory: Root Device: /dev/hdc1 if I had got far enough Root Size/partition table: Output of lspci and lspci -n: Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [E] Configure network HW: [ ] Config network: [ ] Detect CD: [ ] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Create file systems: [ ] Mount partitions: [ ] Install base system: [ ] Install boot loader: [ ] Reboot: [ ] Comments/Problems: Please find attached two attempts to start a sarge install, first on a MCP750 and second on a MVME3604-5. I used the build of 18 December 2004, but I get the same result with the "testing" build of 18 November 2004 on sarge-powerepc-1.iso install/powerpc/vmlinuz-prep.initrd. First note that one must specify a memory size on boot, probably because the "residual data" is stored in high memory and will be written over if not protected some way. The version 2.4 prep.initrd does not work at all on these systems. I think I heard somewhere that there were patches for the prep build that were not present in 2.4 but were present in 2.6??? I never was able to get Woody to work with either of these boards. The version 2.2 boot-mcp750.bin produced by Eric Valette DOES completely work on my MCP750. I think the problems I am having here are not really install problems, but rather kernel configuration problems. It also seems that the Debian support for the Motorola PPC boards (MVME 2600/2700/3600/4600) and MCP750 has not worked in some time???? I have two MCP750s, a 3604-5, and a 2604 that I can use to help debug these problems. I can also borrow a 2700 and a 5100 if desired. Is there anyone in the Debian developers group working on these boards? If so, I don't want to be in the way, but if not I will gladly try to help debug these problems. If anyone can enlighten me, please do so. Thanks! Best Regards, Bill Campbell jwilliamcampbell@comcast.net ************************************************************************************** Copyright Motorola Inc. 1988 - 1998, All Rights Reserved PPC1 Debugger/Diagnostics Release Version 4.1 - 10/12/98 RM01 COLD Start Local Memory Found =08000000 (&134217728) MPU Clock Speed =367Mhz BUS Clock Speed =67Mhz WARNING: Keyboard Not Connected Reset Vector Location : ROM Bank B Mezzanine Configuration: Single-MPU Current 60X-Bus Master : MPU0 Idle MPU(s) : NONE Initializing System Memory (DRAM)... System Memory: 128MB, ECC Enabled (ECC-Memory Detected) L2Cache: 1024KB, 147Mhz PPC1-Bug>nbo Network Booting from: DEC21140, Controller 0, Device 0 Device Name: /pci@80000000/pci1011,9@e,0:0,0 Loading: vmlinuz-prep.initrd Client IP Address = 192.168.1.129 Server IP Address = 192.168.1.102 Gateway IP Address = 192.168.1.1 Subnet IP Address Mask = 255.255.255.0 Boot File Name = vmlinuz-prep.initrd Argument File Name = Network Boot File load in progress... To abort hit <BREAK> Bytes Received =&5513751, Bytes Loaded =&5513751 Bytes/Second =&1378437, Elapsed Time =4 Second(s) Residual-Data Located at: $07F88000 loaded at: 00005400 0054EFF4 relocated to: 00800000 00D49BF4 zimage at: 0080A94C 0093E3DC initrd at: 0093F000 00D3FAC7 avail ram: 00400000 00800000 Linux/PPC load: console=ttyS0,9600 console=tty0 mem=127M Uncompressing Linux...done. Now booting the kernel Total memory = 127MB; using 256kB for hash table (at c0300000) Linux version 2.6.8-powerpc (sven@pegasos2) (version gcc 3.3.5 (Debian 1:3.3.5-2)) #1 Thu Dec 9 10:27:54 CET 2004 PReP architecture Built 1 zonelists Kernel command line: console=ttyS0,9600 console=tty0 mem=127M OpenPIC Version 1.3 (2 CPUs and 16 IRQ sources) at effde000 OpenPIC timer frequency is 8.333519 MHz PID hash table entries: 512 (order 9: 4096 bytes) time_init: decrementer frequency = 16.667038 MHz Console: colour dummy device 80x25 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 121380k available (1732k kernel code, 1060k data, 164k init, 0k highmem) Calibrating delay loop... 731.13 BogoMIPS Mount-cache hash table entries: 512 (order: 0, 4096 bytes) checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 4098k freed NET: Registered protocol family 16 PCI: Probing PCI hardware PCI: Unable to handle 64-bit address space for <------- Not sure what this error means. Setting PCI interrupts for a "Mesquite cPCI (MCP750)" <------- Correct ident PCI: Cannot allocate resource region 0 of device 0000:00:0e.0 Thermal assist unit using timers, shrink_timer: 2000 jiffies audit: initializing netlink socket (disabled) audit(1103438127.996:0): initialized devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 Initializing Cryptographic API Activating ISA DMA hang workarounds. Generic RTC Driver v1.07 Macintosh non-volatile memory driver v1.1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>) RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize input: Macintosh mouse button emulation Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx mice: PS/2 mouse device common for all mice NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 8192 bind 16384) RAMDISK: Compressed image found at block 0 VFS: Mounted root (cramfs filesystem) readonly. Freeing unused kernel memory: 164k init 60k pmac 4k chrp 8k openfirmware NET: Registered protocol family 1 <!!!!HANGS HERE FOREVER UNTIL RESET IS PRESSED> Copyright Motorola Inc. 1988 - 1998, All Rights Reserved PPC1 Debugger/Diagnostics Release Version 4.1 - 10/12/98 RM01 COLD Start Local Memory Found =08000000 (&134217728) MPU Clock Speed =367Mhz BUS Clock Speed =67Mhz WARNING: Keyboard Not Connected Reset Vector Location : ROM Bank B Mezzanine Configuration: Single-MPU Current 60X-Bus Master : MPU0 Idle MPU(s) : NONE Initializing System Memory (DRAM)... System Memory: 128MB, ECC Enabled (ECC-Memory Detected) L2Cache: 1024KB, 147Mhz PPC1-Bug> *********************************************************************************************************** Copyright Motorola Inc. 1988 - 1999, All Rights Reserved PPC1 Debugger/Diagnostics Release Version 4.3 - 01/20/99 RM01 COLD Start Local Memory Found =04000000 (&67108864) MPU Clock Speed =300Mhz BUS Clock Speed =67Mhz WARNING: Keyboard Not Connected Reset Vector Location : ROM Bank A Mezzanine Configuration: Single-MPU Current 60X-Bus Master : MPU0 Idle MPU(s) : NONE Initializing System Memory (DRAM)... System Memory: 64MB, ECC Enabled (ECC-Memory Detected) L2Cache: 512KB SelfTest/Boots about to Begin... Press <BREAK> at anytime to Abort ALL SelfTest about to Begin... Press <ESC> to Bypass, <SPC> to Continue PPC1-Diag>niot Controller LUN =00? Device LUN =00? Node Control Memory Address =03F9E000? Client IP Address =192.168.1.75? Server IP Address =192.168.1.102? Subnet IP Address Mask =255.255.255.0? Broadcast IP Address =192.168.1.255? Gateway IP Address =192.168.1.1? Boot File Name ("NULL" for None) =vmlinuz-prep.initrd? Argument File Name ("NULL" for None) =? Boot File Load Address =001F0000? Boot File Execution Address =001F0000? . PPC1-Diag>ioi I/O Inquiry Status: CLUN DLUN CNTRL-TYPE DADDR DTYPE RM Inquiry-Data 0 0 NCR53C825 0 $00 N MICROP 2112 4024 0 40 NCR53C825 4 $01 Y ARCHIVE Python 04687-XXX 6580 1 0 PC8477 0 $00 Y <None> PPC1-Diag>niot ;H Network Controllers/Nodes Available CLUN DLUN Name Address P-Address/H-Address 0 0 DEC21140 $00007000 192.168.1.75/08003E2F220E 10 0 DEC21140 $00008000 0.0.0.0/0000003002AF 13 0 DEC21140 $00009800 0.0.0.0/08003E2D6E46 PPC1-Diag>nbo Network Booting from: DEC21140, Controller 0, Device 0 Device Name: /pci@80000000/pci1011,9@e,0:0,0 Loading: vmlinuz-prep.initrd Client IP Address = 192.168.1.75 Server IP Address = 192.168.1.102 Gateway IP Address = 192.168.1.1 Subnet IP Address Mask = 255.255.255.0 Boot File Name = vmlinuz-prep.initrd Argument File Name = Network Boot File load in progress... To abort hit <BREAK> Bytes Received =&5513751, Bytes Loaded =&5513751 Bytes/Second =&367583, Elapsed Time =15 Second(s) Residual-Data Located at: $03EE8000 loaded at: 00005400 0054EFF4 relocated to: 00800000 00D49BF4 zimage at: 0080A94C 0093E3DC initrd at: 0093F000 00D3FAC7 avail ram: 00400000 00800000 Linux/PPC load: console=ttyS0,9600 console=tty0 mem=63M Uncompressing Linux...done. Now booting the kernel Total memory = 63MB; using 128kB for hash table (at c0300000) Linux version 2.6.8-powerpc (sven@pegasos2) (version gcc 3.3.5 (Debian 1:3.3.5-2)) #1 Thu Dec 9 10:27:54 CET 2004 PReP architecture Built 1 zonelists Kernel command line: console=ttyS0,9600 console=tty0 mem=63M OpenPIC Version 1.3 (2 CPUs and 16 IRQ sources) at effde000 OpenPIC timer frequency is 8.333674 MHz PID hash table entries: 256 (order 8: 2048 bytes) time_init: decrementer frequency = 16.667731 MHz Console: colour dummy device 80x25 Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 56652k available (1732k kernel code, 1060k data, 164k init, 0k highmem) Calibrating delay loop... 299.00 BogoMIPS Mount-cache hash table entries: 512 (order: 0, 4096 bytes) checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 4098k freed NET: Registered protocol family 16 PCI: Probing PCI hardware Setting PCI interrupts for a "MVME 3600 with MVME761" <----------- correct ident PCI: Cannot allocate resource region 0 of device 0000:00:0b.1 <------ probably not good PCI: Cannot allocate resource region 1 of device 0000:00:0b.1 PCI: Cannot allocate resource region 2 of device 0000:00:0b.1 PCI: Cannot allocate resource region 3 of device 0000:00:0b.1 PCI: Cannot allocate resource region 4 of device 0000:00:0b.1 PCI: Cannot allocate resource region 5 of device 0000:00:0b.1 PCI: Cannot allocate resource region 0 of device 0000:00:0c.0 PCI: Cannot allocate resource region 1 of device 0000:00:0d.0 PCI: Cannot allocate resource region 0 of device 0000:00:0e.0 PCI: Cannot allocate resource region 0 of device 0000:00:10.0 PCI: Cannot allocate resource region 0 of device 0000:00:12.0 PCI: Cannot allocate resource region 0 of device 0000:00:13.0 PCI: I/O Region 0000:00:0d.0/-1 too large (4096 bytes) PCI: I/O Region 0000:00:0d.0/-1 too large (4096 bytes) PCI: I/O Region 0000:00:0d.0/-1 too large (4096 bytes) PCI: I/O Region 0000:00:0d.0/-1 too large (4096 bytes) PCI: I/O Region 0000:00:0d.0/-1 too large (4096 bytes) PCI: I/O Region 0000:00:0d.0/-1 too large (4096 bytes) PCI: I/O Region 0000:00:0d.0/-1 too large (4096 bytes) PCI: I/O Region 0000:00:0d.0/-1 too large (4096 bytes) PCI: I/O Region 0000:00:0d.0/-1 too large (4096 bytes) PCI: I/O Region 0000:00:0d.0/-1 too large (4096 bytes) PCI: I/O Region 0000:00:0d.0/-1 too large (4096 bytes) PCI: I/O Region 0000:00:0d.0/-1 too large (4096 bytes) Thermal assist unit not available audit: initializing netlink socket (disabled) audit(1103492432.571:0): initialized devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 Initializing Cryptographic API Generic RTC Driver v1.07 Macintosh non-volatile memory driver v1.1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>) RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize input: Macintosh mouse button emulation Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx mice: PS/2 mouse device common for all mice NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 8192) RAMDISK: Compressed image found at block 0 VFS: Mounted root (cramfs filesystem) readonly. Freeing unused kernel memory: 164k init 60k pmac 4k chrp 8k openfirmware NET: Registered protocol family 1 <!!!!!! HANGS HERE FOREVER UNTIL RESET PRESSED> Copyright Motorola Inc. 1988 - 1999, All Rights Reserved PPC1 Debugger/Diagnostics Release Version 4.3 - 01/20/99 RM01 COLD Start Local Memory Found =04000000 (&67108864) MPU Clock Speed =300Mhz BUS Clock Speed =67Mhz WARNING: Keyboard Not Connected Reset Vector Location : ROM Bank A Mezzanine Configuration: Single-MPU Current 60X-Bus Master : MPU0 Idle MPU(s) : NONE Initializing System Memory (DRAM)... System Memory: 64MB, ECC Enabled (ECC-Memory Detected) L2Cache: 512KB SelfTest/Boots about to Begin... Press <BREAK> at anytime to Abort ALL SelfTest about to Begin... Press <ESC> to Bypass, <SPC> to Continue RAVEN MPCR: MPC Register Read..................... Running ---> PASSED RAVEN PCIR: PCI Register Read..................... Running ---> PASSED RAVEN WALK: Register Walking Bit.................. Running ---> PASSED RAVEN TMR: Timers................................. Running ---> PASSED FALCON REGR: Register Read......................... Running ---> PASSED FALCON WALK: Register Walking Bit.................. Running ---> BYPASS RAM ADR: Addressability......................... Running ---> PASSED UART REGA: Register Access....................... Running ---> PASSED UART IRQ: Interrupt.............................. Running ---> PASSED UART BAUD: Baud Rate............................. Running ---> PASSED UART LPBK: Internal Loopback..................... Running ---> PASSED Z8536 CNT: Counter................................ Running ---> PASSED Z8536 LNK: Linked Counter......................... Running ---> PASSED Z8536 IRQ: Interrupt.............................. Running ---> PASSED Z8536 REG: Register............................... Running ---> PASSED SCC ACCESS: Device/Register Access.............. Running ---> PASSED SCC IRQ: Interrupt Request...................... Running ---> PASSED PAR8730X REG: PC8730x Parallel Port's Register/Data.. Running ---> PASSED DEC REGA: 7000 PCI Register Access.............. Running ---> PASSED DEC XREGA: 7000 Extended PCI Register Access.... Running ---> PASSED DEC ILR: 7000 Interrupt Line Register Access.... Running ---> PASSED DEC ERREN: 7000 ERREN and SERREN Bit Toggle..... Running ---> PASSED DEC IOR: 7000 I/O Resource Register Access...... Running ---> PASSED DEC SPACK: 7000 Single Packet Xmit/Recv......... Running ---> PASSED DEC CINIT: 7000 Chip Initialization............. Running ---> PASSED DEC REGA: 8000 PCI Register Access.............. Running ---> PASSED DEC XREGA: 8000 Extended PCI Register Access.... Running ---> PASSED DEC ILR: 8000 Interrupt Line Register Access.... Running ---> PASSED DEC ERREN: 8000 ERREN and SERREN Bit Toggle..... Running ---> PASSED DEC IOR: 8000 I/O Resource Register Access...... Running ---> PASSED DEC SPACK: 8000 Single Packet Xmit/Recv......... Running ---> PASSED DEC CINIT: 8000 Chip Initialization............. Running ---> PASSED DEC REGA: 9800 PCI Register Access.............. Running ---> PASSED DEC XREGA: 9800 Extended PCI Register Access.... Running ---> PASSED DEC ILR: 9800 Interrupt Line Register Access.... Running ---> PASSED DEC ERREN: 9800 ERREN and SERREN Bit Toggle..... Running ---> PASSED DEC IOR: 9800 I/O Resource Register Access...... Running ---> PASSED DEC SPACK: 9800 Single Packet Xmit/Recv......... Running ---> PASSED DEC CINIT: 9800 Chip Initialization............. Running ---> PASSED NCR PCI: 6000 NCR 53c8xx PCI Access............. Running ---> PASSED NCR ACC1: 6000 NCR 53c8xx Device Access......... Running ---> PASSED NCR ACC2: 6000 NCR 53c8xx Register Access....... Running ---> PASSED NCR SFIFO: 6000 NCR 53c8xx SCSI FIFO............ Running ---> PASSED NCR DFIFO: 6000 NCR 53c8xx DMA FIFO............. Running ---> PASSED NCR IRQ: 6000 NCR 53c8xx Interrupts............. Running ---> PASSED NCR SCRIPTS: 6000 NCR 53c8xx SCRIPTs Processor.. Running ---> PASSED NCR PCI: 9000 NCR 53c8xx PCI Access............. Running ---> PASSED NCR ACC1: 9000 NCR 53c8xx Device Access......... Running ---> PASSED NCR ACC2: 9000 NCR 53c8xx Register Access....... Running ---> PASSED NCR SFIFO: 9000 NCR 53c8xx SCSI FIFO............ Running ---> PASSED NCR DFIFO: 9000 NCR 53c8xx DMA FIFO............. Running ---> PASSED NCR IRQ: 9000 NCR 53c8xx Interrupts............. Running ---> PASSED NCR SCRIPTS: 9000 NCR 53c8xx SCRIPTs Processor.. Running ---> PASSED ISABRDGE REG: i82378 Register Access................. Running ---> PASSED ISABRDGE IRQ: Interrupt Request...................... Running ---> PASSED CL1283 REG: cl1283 Register Access................. Running ---> BYPASS PPC1-Diag>
|