Bug#285417: Package: installation-reports
Package: installation-reports
Debian-installer-version: 18-Nov-2004 13:32
http://ftp.debian.org/debian/dists/testing/main/installer-i386/rc2/images/floppy/
uname -a:
Linux debian 2.4.27-1-686 #1 Fri Sep 3 06:28:00 UTC 2004 i686 GNU/Linux
Date: 2004-12-06
Method: bootfloppy-image.img
If network install, from where?
ftp://ftp.us.debian.org
Proxied? No
Machine: HP Omnibook 6000
Processor: vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 6
cpu MHz : 846.335
cache size : 256 KB
Memory: 384 MB
Root Device: HDD0 Toshiba MK2016GAP, 18.6GB, IBM-DJSA-220;/dev/hda
parted_server: OUT: 1 32256-565125119 565092864 primary fat16
/dev/ide/host0/bus0/target0/lun0/part1
parted_server: OUT: 2 565125120-7416299519 6851174400 primary
fat32 /dev/ide/host0/bus0/target0/lun0/part2
parted_server: OUT: 3 7416299520-19717447679 12301148160 primary
ext2 /dev/ide/host0/bus0/target0/lun0/part3
parted_server: OUT: 5 19717479936-20003880959 286401024 logical
linux-swap /dev/ide/host0/bus0/target0/lun0/part5
$ lspci
0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host
bridge (rev 03)
0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP
bridge (rev 03)
0000:00:07.0 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 03)
0000:00:0a.0 CardBus bridge: Texas Instruments PCI1420
0000:00:0a.1 CardBus bridge: Texas Instruments PCI1420
0000:00:0b.0 Ethernet controller: 3Com Corporation 3c556 Hurricane
CardBus [Cyclone] (rev 10)
0000:00:0b.1 Communication controller: 3Com Corporation Mini PCI 56k
Winmodem (rev 10)
0000:00:0d.0 Multimedia audio controller: ESS Technology ES1983S
Maestro-3i PCI Audio Accelerator
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Rage
Mobility P/M AGP 2x (rev 64)
$ lspci -n
0000:00:00.0 0600: 8086:7190 (rev 03)
0000:00:01.0 0604: 8086:7191 (rev 03)
0000:00:07.0 0680: 8086:7110 (rev 02)
0000:00:07.1 0101: 8086:7111 (rev 01)
0000:00:07.2 0c03: 8086:7112 (rev 01)
0000:00:07.3 0680: 8086:7113 (rev 03)
0000:00:0a.0 0607: 104c:ac51
0000:00:0a.1 0607: 104c:ac51
0000:00:0b.0 0200: 10b7:6055 (rev 10)
0000:00:0b.1 0780: 10b7:1007 (rev 10)
0000:00:0d.0 0401: 125d:1998
0000:01:00.0 0300: 1002:4c4d (rev 64)
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [E]
Reboot: [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
I wanted to have grib or lilo installed on /dev/hda3 but when I hit back
to check what the numbers of the partitions were, the installer lost
track of where it was and the boot loader installation failed.
I then tried again and also switched to lilo, no luck and it seems I was
forced to reformat and re-install the base system.
After that, things were fine.
I am using a third party boot manager:
http://gag.sourceforge.net/
GAG doesn't need its own partition. It installs itself in the first
track of the hard disk.
Thank you so much again for all this incredible work and results.
Best Regards.
--
Olivier Schreiber OSchreiber.ae90@gtalumni.org H323 464 5818
Reply to: