Bug#284633: Installation Report 2004-12-07 PowerPC
Package: installation-reports
Debian-installer-version: 2004-11-22
http://www.debian.org/devel/debian-installer/
uname -a: Linux debian 2.6.9-powerpc #1 Thu Oct 28 14:04:28 CEST 2004
ppc GNU/Linux
Date: 2004-12-04
Method: Using the netinst CD image, with Debian base. Installed the
base system, exited base-config at configure apt, configured PPPoE,
and then finished configuring the base system.
Machine: iMac G4
Processor: 1 GHZ PowerPC 7455
Memory: 256 MB DDR
Root Device: IDE
Root Size/partition table: /dev/hda
# type name length base
( size ) system
/dev/hda1 Apple_partition_map Apple 63 @ 1
( 31.5k) Partition map
/dev/hda2 Apple_Bootstrap untitled 1954 @ 64
(977.0k) NewWorld bootblock
/dev/hda3 Apple_HFS Mac OS X 110038232 @
46263248 ( 52.5G) HFS
/dev/hda4 Apple_UNIX_SVR2 untitled 44759766 @ 2018
( 21.3G) Linux native
/dev/hda5 Apple_UNIX_SVR2 swap 1501464 @
44761784 (733.1M) Linux swap
/dev/hda6 Apple_Free Extra 8 @
156301480 ( 4.0k) Free space
Block size=512, Number of Blocks=156301488
DeviceType=0x0, DeviceId=0x0
Output of lspci and lspci -n:
0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 AGP
0000:00:10.0 VGA compatible controller: nVidia Corporation: Unknown
device 0189 (rev a2)
0001:10:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 PCI
0001:10:17.0 ff00: Apple Computer Inc. KeyLargo/Intrepid Mac I/O
0001:10:18.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB
0001:10:19.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB
0001:10:1a.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB
0001:10:1b.0 USB Controller: NEC Corporation USB (rev 43)
0001:10:1b.1 USB Controller: NEC Corporation USB (rev 43)
0001:10:1b.2 USB Controller: NEC Corporation USB 2.0 (rev 04)
0002:20:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 Internal PCI
0002:20:0d.0 ff00: Apple Computer Inc. UniNorth/Intrepid ATA/100
0002:20:0e.0 FireWire (IEEE 1394): Apple Computer Inc. UniNorth 2
FireWire (rev 81)
0002:20:0f.0 Ethernet controller: Apple Computer Inc. UniNorth 2 GMAC
(Sun GEM) (rev 80)
0000:00:0b.0 0600: 106b:0034
0000:00:10.0 0300: 10de:0189 (rev a2)
0001:10:0b.0 0600: 106b:0035
0001:10:17.0 ff00: 106b:003e
0001:10:18.0 0c03: 106b:003f
0001:10:19.0 0c03: 106b:003f
0001:10:1a.0 0c03: 106b:003f
0001:10:1b.0 0c03: 1033:0035 (rev 43)
0001:10:1b.1 0c03: 1033:0035 (rev 43)
0001:10:1b.2 0c03: 1033:00e0 (rev 04)
0002:20:0b.0 0600: 106b:0036
0002:20:0d.0 ff00: 106b:003b
0002:20:0e.0 0c00: 106b:0031 (rev 81)
0002:20:0f.0 0200: 106b:0032 (rev 80)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [E]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
Configuring the network did not work because I can only connect using
PPPoE. It resulted in an error.
The installation went good and smooth. Something I would like to see
is to be able to configuring a PPPoE (ADSL) connection before
base-config or in base-config before it's time to configure apt.
Reply to: