[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#282814: installation-reports: [hppa] hardware detection & partitioning problems w/ 2.6

Paul Telford wrote:
> On Tue, 30 Nov 2004, Joey Hess wrote:
> > Paul Telford wrote:
> > > 0000:00:14.0 Ethernet controller: Digital Equipment Corporation DECchip
> > > 21142/43 (rev 30)
> > > 0000:00:14.0 0200: 1011:0019 (rev 30)
> >
> > discover1 wants to load de4x5 for this. Is that wrong?
> I don't know.  I do know that it didn't automatically load anything (or at
> least if it tried to, it failed).  The tulip driver works when selected
> from the list manually.  The 2.4-based install also uses tulip on this
> machine (driver built-in)

It's very wrong on at least my a500, causes a crash with the 2.4 kernel
after base install. See bug #282814. The de4x5 module's probably not
availale in the d-i initrd at all, which is why it gave you the list.

Did the system you installed with 2.6 boot up ok? Was de4x5 loaded by
discover then, or is the module not available for 2.6 at all?

see shy jo

Attachment: signature.asc
Description: Digital signature

Reply to: