Bug#283182: Install Report

[Jin Zhao <jzhao@qcorps.com>]

Package: installation-reports

INSTALL REPORT

Debian-installer-version: 
http://ftp.debian.org/debian/dists/testing/main/installer-i386/rc2/images/netboot/netboot.tar.gz 
(timestamped:

18-Nov-2004 14:32)


uname -a: Linux leffe 2.4.27-1-686 #1 Fri Sep 3 06:28:00 UTC 2004 i686 
GNU/Linux

Date: 11/26/04

Method: preseeded PXE-DHCP-TFTP netboot install

Machine: white box dual Xeon server

Processor: dual Xeon 2.4 GHz

Memory: 4 GB DDR PC-2100 ECC Registered

Root Device: 3ware hardware raided logical disk (/dev/sda)

Root Size/partition table: 
df -kl:
/dev/sda2               933393    131279    752313  15% /
/dev/sda1                90297     21821     63659  26% /boot
/dev/sda7              5905972     32872   5573088   1% /home
/dev/sda8              1874267      8239   1766025   1% /opt
/dev/sda5              3937220    651360   3085856  18% /usr
/dev/sda6               933361    189614    693948  22% /var

Output of lspci and lspci -n:
lspci:
0000:00:00.0 Host bridge: Intel Corp. E7501 Memory Controller Hub (rev 01)
0000:00:00.1 ff00: Intel Corp. E7500/E7501 Host RASUM Controller (rev 01)
0000:00:02.0 PCI bridge: Intel Corp. E7500/E7501 Hub Interface B 
PCI-to-PCI Bridge (rev 01)
0000:00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 02)
0000:00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 02)
0000:00:1d.2 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #3) (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 42)
0000:00:1f.0 ISA bridge: Intel Corp. 82801CA LPC Interface Controller 
(rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801CA Ultra ATA Storage 
Controller (rev 02)
0000:00:1f.3 SMBus: Intel Corp. 82801CA/CAM SMBus Controller (rev 02)
0000:01:1c.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04)
0000:01:1d.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04)
0000:01:1e.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04)
0000:01:1f.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04)
0000:02:01.0 RAID bus controller: 3ware Inc 3ware 7000-series ATA-RAID 
(rev 01)
0000:03:02.0 Ethernet controller: Intel Corp. 82546EB Gigabit Ethernet 
Controller (Copper) (rev 01)
0000:03:02.1 Ethernet controller: Intel Corp. 82546EB Gigabit Ethernet 
Controller (Copper) (rev 01)
0000:04:01.0 VGA compatible controller: ATI Technologies Inc Rage XL 
(rev 27)

lspci -n 
0000:00:00.0 0600: 8086:254c (rev 01)
0000:00:00.1 ff00: 8086:2541 (rev 01)
0000:00:02.0 0604: 8086:2543 (rev 01)
0000:00:1d.0 0c03: 8086:2482 (rev 02)
0000:00:1d.1 0c03: 8086:2484 (rev 02)
0000:00:1d.2 0c03: 8086:2487 (rev 02)
0000:00:1e.0 0604: 8086:244e (rev 42)
0000:00:1f.0 0601: 8086:2480 (rev 02)
0000:00:1f.1 0101: 8086:248b (rev 02)
0000:00:1f.3 0c05: 8086:2483 (rev 02)
0000:01:1c.0 0800: 8086:1461 (rev 04)
0000:01:1d.0 0604: 8086:1460 (rev 04)
0000:01:1e.0 0800: 8086:1461 (rev 04)
0000:01:1f.0 0604: 8086:1460 (rev 04)
0000:02:01.0 0104: 13c1:1001 (rev 01)
0000:03:02.0 0200: 8086:1010 (rev 01)
0000:03:02.1 0200: 8086:1010 (rev 01)
0000:04:01.0 0300: 1002:4752 (rev 27)


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [ ]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [O]


Comments/Problems:
This is a smooth installation. The only drawback is the SMP was not 
recognized and the smp kernel was not installed by d-i. I had to add the 
smp kernel in the second installation phase.