Bug#282943: Installation Report RC2 on Sparc Ultra60
Package: installation-reports
INSTALL REPORT
Debian-installer-version: rc2 sparc businesscard iso
Linux dhcp1 2.4.27-1-sparc64-smp #1 SMP Mon Aug 23 23:23:19 PDT 2004 sparc64 GNU/Linux
Date: Do Nov 25 2004
Method: How did you install? What did you boot off? If network
install, from where? Proxied?
cdrom, businesscard image, http://ftp-stud.fht-esslingen.de
Machine: Sun Ultra60
Processor:cpu : TI UltraSparc II (BlackBird)
fpu : UltraSparc II integrated FPU
promlib : Version 3 Revision 31
prom : 3.31.0
type : sun4u
ncpus probed : 2
ncpus active : 2
Cpu0Bogo : 897.84
Cpu0ClkTck : 000000001ad28180
Cpu2Bogo : 897.84
Cpu2ClkTck : 000000001ad28180
MMU Type : Spitfire
State:
CPU0: online
CPU2: online
Memory: 2GB
Root Device: SCSI /dev/sdb
fdisk -l /dev/sdb
Disk /dev/sdb (Sun disk label): 64 heads, 32 sectors, 8637 cylinders
Units = cylinders of 2048 * 512 bytes
Device Flag Start End Blocks Id System
/dev/sdb1 0 95 97280 1 Boot
/dev/sdb2 95 362 273408 83 Linux native
/dev/sdb3 0 8637 8844288 5 Whole disk
/dev/sdb4 362 3350 3059712 83 Linux native
/dev/sdb5 3350 4839 1524736 83 Linux native
/dev/sdb6 4839 5318 490496 82 Linux swap
/dev/sdb7 5318 5587 275456 83 Linux native
/dev/sdb8 5587 8637 3123200 83 Linux native
Root Size/partition table:
cat /etc/fstab
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/sdb2 / ext3 defaults,errors=remount-ro 0 1
/dev/sdb1 /boot ext3 defaults 0 2
/dev/sdb8 /home ext3 defaults 0 2
/dev/sdb7 /tmp ext3 defaults 0 2
/dev/sdb4 /usr ext3 defaults 0 2
/dev/sdb5 /var ext3 defaults 0 2
/dev/sdb6 none swap sw 0 0
/dev/scd0 /media/cdrom0 iso9660 ro,user,noauto 0 0
Output of lspci and lspci -n:
dhcp1:~# lspci
0000:00:00.0 Host bridge: Sun Microsystems Computer Corp. Psycho PCI Bus
Module
0000:00:01.0 Bridge: Sun Microsystems Computer Corp. EBUS (rev 01)
0000:00:01.1 Ethernet controller: Sun Microsystems Computer Corp. Happy Meal (rev 01)
0000:00:03.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 14)
0000:00:03.1 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 14)
0000:01:00.0 Host bridge: Sun Microsystems Computer Corp. Psycho PCI Bus Module
dhcp1:~# lspci -n
0000:00:00.0 0600: 108e:8000
0000:00:01.0 0680: 108e:1000 (rev 01)
0000:00:01.1 0200: 108e:1001 (rev 01)
0000:00:03.0 0100: 1000:000f (rev 14)
0000:00:03.1 0100: 1000:000f (rev 14)
0000:01:00.0 0600: 108e:8000
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
Worked like charm, you did a great job!
There is one showstopper:
The package installation for the task "Desktop Environment" failed.
Cause kdegraphics is not installable on arches other than i386 or
powerpc, so aptitude failed.
I will report this seperatly to debian-release ande debian-kde
--
Jörg Friedrich
There are only 10 types of people:
Those who understand binary and those who don't.
Reply to: