Bug#282861: installation-reports: success (Dell Optiplex GX280 + 2.6.8 + SATA)
Package: installation-reports
INSTALL REPORT
Debian-installer-version: sarge-i386-businesscard.iso, rc2, 2004-11-23
uname -a: Linux framboos 2.6.8-1-686 #1 Mon Nov 22 10:55:19 UTC 2004 i686 GNU/Linux
Date: Thu Nov 25 00:08:56 CET 2004
Method: Boot from businesscard CD, boot linux26, no special options,
deb http://.../apt-cacher/ftp.nl.debian.org/debian/ sid main
Machine: Dell Optiplex GX280
Processor: Pentium 4 processor 520
Memory: 1038872 Kb
Root Device: WDC WD800JD-75HK (80Gb SATA disk)
Root Size/partition table:
Disk /dev/sda: 80.0 GB, 80000000000 bytes
255 heads, 63 sectors/track, 9726 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 9 72261 de Dell Utility
/dev/sda2 * 10 40 249007+ 83 Linux
/dev/sda3 41 9726 77802795 8e Linux LVM
/dev/vg0/root:vg0:3:1:-1:1:2097152:256:-1:0:0:254:0
/dev/vg0/tmp:vg0:3:1:-1:1:2097152:256:-1:0:0:254:1
/dev/vg0/usr:vg0:3:1:-1:1:12582912:1536:-1:0:0:254:2
/dev/vg0/var:vg0:3:1:-1:1:12582912:1536:-1:0:0:254:3
/dev/vg0/swap:vg0:3:1:-1:1:4194304:512:-1:0:0:254:4
/dev/vg0/home:vg0:3:1:-1:1:20971520:2560:-1:0:0:254:5
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: Intel Corp. 915G/P/GV Processor to I/O Controller (rev 04)
0000:00:01.0 PCI bridge: Intel Corp. 915G/P/GV PCI Express Root Port (rev 04)
0000:00:02.0 VGA compatible controller: Intel Corp. 82915G Express Chipset Family Graphics Controller (rev 04)
0000:00:02.1 Display controller: Intel Corp. 82915G Express Chipset Family Graphics Controller (rev 04)
0000:00:1c.0 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
0000:00:1c.1 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 03)
0000:00:1d.0 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
0000:00:1d.3 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
0000:00:1d.7 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev d3)
0000:00:1f.0 ISA bridge: Intel Corp. 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03)
0000:00:1f.1 IDE interface: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
0000:00:1f.2 IDE interface: Intel Corp. 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 03)
0000:00:1f.3 SMBus: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
0000:02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01)
0000:04:00.0 Multimedia audio controller: Creative Labs SB Audigy LS
0000:04:01.0 Ethernet controller: MYSON Technology Inc SURECOM EP-320X-S 100/10M Ethernet PCI Adapter
0000:00:00.0 0600: 8086:2580 (rev 04)
0000:00:01.0 0604: 8086:2581 (rev 04)
0000:00:02.0 0300: 8086:2582 (rev 04)
0000:00:02.1 0380: 8086:2782 (rev 04)
0000:00:1c.0 0604: 8086:2660 (rev 03)
0000:00:1c.1 0604: 8086:2662 (rev 03)
0000:00:1d.0 0c03: 8086:2658 (rev 03)
0000:00:1d.1 0c03: 8086:2659 (rev 03)
0000:00:1d.2 0c03: 8086:265a (rev 03)
0000:00:1d.3 0c03: 8086:265b (rev 03)
0000:00:1d.7 0c03: 8086:265c (rev 03)
0000:00:1e.0 0604: 8086:244e (rev d3)
0000:00:1f.0 0601: 8086:2640 (rev 03)
0000:00:1f.1 0101: 8086:266f (rev 03)
0000:00:1f.2 0101: 8086:2651 (rev 03)
0000:00:1f.3 0c05: 8086:266a (rev 03)
0000:02:00.0 0200: 14e4:1677 (rev 01)
0000:04:00.0 0401: 1102:0007
0000:04:01.0 0200: 1516:0803
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
No hitches in installation.
RC2 solves the problem in pre-rc2, where boot hangs in hwclockfirst,
due to broken rtc, discussed here:
http://lists.debian.org/debian-boot/2004/10/msg00898.html
RTC is still broken on this box, but hwclock included in the
util-linux included in rc2 recovers with a time-out.
There is a remark on the relation between RTC, HPET and ACPI:
http://lists.debian.org/debian-kernel/2004/09/msg00651.html
There is a suggestion the generic RTC driver should allow
coexistence between RTC and APIC:
http://listes.cru.fr/wws/arc/suplibre/2004-11/msg00016.html
The USB keyboard works out of the box, which was not the case in pre-rc2.
The onboard graphics controller works in VESA mode, here still in
limited resolution, without graphics acceleration.
There is a suggestion xorg-x11-sever >= 6.8 should provide
more complete support for the i915 chipset.
http://listes.cru.fr/wws/arc/suplibre/2004-11/msg00017.html
An earlier install report mentioned the need to select
IDE emulation mode for SATA drives in BIOS to install;
with linux26, SATA native mode in BIOS also worked without
special options.
http://lists.debian.org/debian-boot/2004/11/msg00302.html
Install logs and other status info is available in /var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.
Reply to: