[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#280558: Package: installation-reports



Package: installation-reports

Debian-installer-version: http://www.debian.org/devel/debian-installer/
uname -a: Linux nsmse68 2.6.8-1-386 #1 Tue Nov 8 22:45:28 CET 2004 i686 GNU/Linux
Date: originally 8. Nov
Method: CD Boot (USB) (http://cdimage.debian.org/pub/cdimage-testing/sid_d-i/i386/pre-rc2/sarge-i386-netinst.iso)
and using ftp.de.debian.org as depot ...

Machine: HP compaq nc4010
Processor: Pentium M
Memory: 512 (later it will be 1024)
Root Device: ide /dev/hda3
Root Size/partition table:
Disk /dev/hda: 60.0 GB, 60011642880 bytes
16 heads, 63 sectors/track, 116280 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/hda1               1       15501     7812472+   c  W95 FAT32 (LBA)
/dev/hda2           15502       25189     4882752    c  W95 FAT32 (LBA)
/dev/hda3           25190      112382    43945272   83  Linux
/dev/hda4          112383      116280     1964592   82  Linux swap

Output of lspci and lspci -n:
0000:00:00.0 Host bridge: ATI Technologies Inc: Unknown device cbb2 (rev 02)
0000:00:01.0 PCI bridge: ATI Technologies Inc PCI Bridge [IGP 340M]
0000:00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller Audio Device (rev 02) 0000:00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV]
0000:00:08.0 Modem: ALi Corporation M5457 AC'97 Modem Controller
0000:00:09.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01) 0000:00:0b.0 CardBus bridge: O2 Micro, Inc. OZ711M1 SmartCardBus MultiMediaBay Controller (rev 20) 0000:00:0b.2 System peripheral: O2 Micro, Inc. OZ711Mx MultiMediaBay Accelerator
0000:00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c4)
0000:00:11.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
0000:00:12.0 USB Controller: NEC Corporation USB (rev 43)
0000:00:12.1 USB Controller: NEC Corporation USB (rev 43)
0000:00:12.2 USB Controller: NEC Corporation USB 2.0 (rev 04)
0000:00:13.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5705M Gigabit Ethernet (rev 03)
0000:01:05.0 VGA compatible controller: ATI Technologies Inc Radeon IGP 340M
----------------------
0000:00:00.0 0600: 1002:cbb2 (rev 02)
0000:00:01.0 0604: 1002:7010
0000:00:06.0 0401: 10b9:5451 (rev 02)
0000:00:07.0 0601: 10b9:1533
0000:00:08.0 0703: 10b9:5457
0000:00:09.0 0200: 168c:0013 (rev 01)
0000:00:0b.0 0607: 1217:7114 (rev 20)
0000:00:0b.2 0880: 1217:7110
0000:00:10.0 0101: 10b9:5229 (rev c4)
0000:00:11.0 0680: 10b9:7101
0000:00:12.0 0c03: 1033:0035 (rev 43)
0000:00:12.1 0c03: 1033:0035 (rev 43)
0000:00:12.2 0c03: 1033:00e0 (rev 04)
0000:00:13.0 0200: 14e4:165d (rev 03)
0000:01:05.0 0300: 1002:4337

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [O]

Comments/Problems:

keep going!!!
everyting worked perfect, at least for me.

The only thing was the X configuration:
- X was working (with wrong resolution / scaled on notebook lcd)
- no problem using xf86cfg to reconfigure
- I created the link /dev/mouse -> /dev/input/mice manually

Using grub as default is a great choice! thanks!



Reply to: